Setup error when you try to load LR 6

Similar Questions

• Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

  Original title: load error when you try to load Halo 2

  People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

  Thank you for your time in advance.

  Hello

  As you are facing problems with Halo 2, I suggest you to refer the link for better support:

  http://forums.haloonwindowsvista.com/forums/

• "Invalid Operating System" error when you try to load McAfee

  I try to load the McAfee virus scan, but I get an error message "Invalid Operating System".

  OS is XP Pro comes with the system and the current version is 5.1 service pack 3. It would not have automatically updated from Microsoft if the OS was not legal

  Hello

  ·        This only happens when you install McAfee virus or with the entire application?

  ·        How you try to install McAfee on the system from the internet explore or a disc?

  ·        Were you able to install McAfee before on the system?

  ·        What is the exact error that you are experiencing when you try to install a program?

  I suggest to install the application in clean boot mode and check if you are able to install the program or not.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to load FlipShare software for my Flip camera

  I just bought a Flip Mino HD camera.  When I plug the camera into my computer, it is impossible to load FlipShare software, because it is said that there is a "problem with the package Windows install.  A script required for this install to complete could not be run. »

  I contacted Flip and they suggested that "we had customer reports success after having contacted Microsoft about it, like the"seller of package"requires a script and your package provider is Microsoft."

  I hope someone at Microsoft to help me.

  Use the Windows Installer Cleanup found herehttp://support.microsoft.com/kb/290301

  If you have installation problems, which, as I did and get a message that a library has not been saved, download this to reinstall VBScript to fix the files needed to run the cleanup utility:http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=C717D943-7E4B-4622-86EB-95A22B832CAA

• network error when you try to load the Messenger. Can help out you in line/Tech support

  Why can't I load the new version of live messenger? Why my hard drive does not start a DVD disc or data automatically when placed in player?

  Hello
   
   
  The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
  http://windowslivehelp.com/product.aspx?ProductID=2
   

• My hard drive crashed, I bought a new, and I have the restore disks but it error when you try to load on the new hard drive!

  It wont let me load Vista on the new hard drive

  Hard drive test:
  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• continue to download error when you try to load the apps page in creative cloud

  I get a download error whenever I click on the application in creative cloud icon so I can access any of my apps there at - there anyone who can help? I tried refreshing and reloading the page, but nothing seems to work.

  Hi Holli94,

  Can you please check the permissions on the following folders and confirm if you have the permission to read & write full or not. If this isn't the case, please give all the permissions and this should solve the problem.

  1) / Library/ApplicationSupport/Adobe

  (2) ~/Library/ApplicationSupport/Adobe

  (3) / utilities/Adobe Application Manager

  (4) / utilities/Desktop Application creative Cloud.

  See you soon,.

  Michael Sharma

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• I get an error 0643 when you try to load updates

  I get an error 0643 when you try to load updates, ideas

  I get an error 0643 when you try to load updates, ideas

  This tutorial will Support MS work?

  http://support.Microsoft.com/kb/976982

• Error 1935 when you try to load Adobe 8.12

  I get 1935 error when I try to load Adobe 8.12

  Hello ChrisOB_848,

  Read the article from Adobe addressing Error 1935.
  http://helpx.Adobe.com/Acrobat/KB/Error-1935-install-Acrobat-Reader.html

  Let us know if that helps.

  Marilyn

• Error when you try to sign panel - could not load key file (password is incorrect)

  Hello

  I still get the same error when you try to export as an extension to indesign cs5 and cs6 cs (have not tried anything else)

  I'm not trying to export to a single address to read.

  

  I created my own certificate, I have not registered with an authority like VeriSign so I guess I can fill in the details as I like, that is a name, a password I like.

  

  I select my Java installation by browsing below

  

  I have the same password that I have composed for the type certificate and then get the error above.

  Note Although it said that it had exported the file with an error in fact it does not export any file zxp or any other thing at any place I've ever seen, much less the location I specified.

  I get the same error when you use the adobe Exchange packer.

  Would be very grateful for a solution

  Thanks in advance

  Trevor

  OK to sum up the past two years on this topic

  I have not tried and failed to get the configurator to work.

  Configurator is not compatible with the new html CC panels, will he ever be by the sound of things.

  See Adobe Configurator and deprecated panel based on Flash support in Adobe CC products of Jonathan Ferman

  Jonathan is the patron of configurator and not just another opinion.  See the alternative he proposes.  I have not tried but I made my own extensions unsigned.

  See also why no Configurator 4 compatible with Indesign CC?

  HTH, time to continue with life

  Trevor

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• Error when you try to play the game: memory access violation

  memory access violation

  I have redownloaded a game that has been previously loaded on my computer, now I get this error when you try to play the game "Memory Access Violation".

  Your sound card that is more than adequate.
  If the game was previously installed and worked fine then maybe it is not been completely uninstalled.
  I suggest you uninstall the game, look in the registry for any left over entries that can refer to the game.

  Then restart and reinstall the game.

  Alternatively, you can try to install in compatibility mode. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if that helps.

  Marilyn

• Script error when you try to install Flash Player 18.

  , I get a script error when you try to install Flash Player 18. The error box says "line of Script error 202 tank 13 Unable to set property"innerHTML"undefined or null references code 0 URL C://.../Downloads/flashplayer18ax_ra_install.exe/160" and "undefined" is on the screen of the installer after I closed the error box.  I'm on a Dell Inspiron, IE 11.0.9600.17843, Windows 7 Home Premium Svc Pack 1.

  I get this same error box any installer that I use for Flash Player 18.  The error box appears immediately after I launch the installer. I reinstalled flash player 17 successfully two days without problem, but of course Flash Player 17 does not now work on web sites.  I ran the Adobe flash player Uninstaller a couple of times between tries - same result, same script error box.  I've lost count of how many times I tried to install it and my fingers are raw...

  Roughly the same time the error box appears or a second or later, my Norton Insight pops up a box that says that Norton has not enough information about this program (the installation program, I guess), to recommend this program, but I don't think that it prevents the installation program to run. Or maybe it is?

  This problem seems to come from the installer of Flash Player, but I don't see anything from Adobe on this matter.  I tried running as administrator, I disabled the parts of Norton to see if it is this error source - I've searched for hours on the internet and I can't find answers.  I've never had a Flash Player update problem so far.  Anyone can understand this or point me in the right direction?   Thank you.

  Hi all

  Installer online team was interested in to this yet and the DPI setting as the culprit.  If the DPI setting is not set to 100%, 125%, 150% or 200% returns the script error.  If you are DPI setting is set to something else, assign him one of them please and Setup online should work.  The team is working on a fix for this.

  To check/change the DPI setting:

  1. Start the control panel and go to Control Panel\All Control Panel Items\Display
  2. In the left menu, select set size custom text (PPP)
  3. In the Windows Setup custom DPI select 100%, 125%, 150% or 200% in the menu drop-down
  4. Click OK
  5. Select apply
  6. Open a session/disable
  7. Online installer should now run without displaying the script error.

  --

  Maria

• Error when you try to view the application latencies

  I'm not able to get see Planner to latencies report application series of tests with multiple virtual machines in them. If I run a test that has 3-2 VMs in it while I'm able to view the results of the trial very well, however when I try to run tests with more of that I get errors when I try to view the results. When I try to load the web page results to see Planner, nothing happens, and I get the following error in viewplanner.log:

  2012-10-24 20:16:13, 025 INFO {}
  Unhandled error
  Traceback (most recent call changed):
  File "/ usr/lib/python2.6/site-packages/twisted/web/http.py", line 773, requestReceived
  Self.Process)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 127, process
  Self.Render (resrc)
  File "/ usr/lib/python2.6/site-packages/twisted/web/server.py", line 147, in rendering
  body = resrc.render (self)
  File "/ usr/lib/python2.6/site-packages/txjsonrpc/web/jsonrpc.py", line 112, rendering
  () defer.maybeDeferred(function,_*args).addErrback
  -< exception that is caught here >-
  File "/ usr/lib/python2.6/site-packages/twisted/internet/defer.py", line 133, in maybeDeferred
  result = f (* args, * kw)
  File "/ tmp/ViewPlanner/web_interface.py", line 527, jsonrpc_getResultsMap
  File "/ tmp/ViewPlanner/mysql_interface.py", line 571, in getTestAverages
  exceptions. KeyError: 0

  When I try to manually execute the python script statement, it tells me that there is no result for the test.

  I just ran a test locally with 276 VMs, according to viewplanner.log, all 276 VMs transferred their results to the device. Yet I still get this error when you try to view the results.

  I tried to create new images GoldenDesktop and GoldenClient, as well as deployed a new device see Planner and reinstalled all of its agent programs, nothing helps. Anyone know what could be the cause?

  We have seen this issue for large series and I attach a patch file that you can overwrite the/root/ViewPlanner harness directory and then restart the vdiappd service, and then you can give it a try.

  For manual results extratcion by using the report.pyc script, you must use '-j' I ' and '-j' operations if you ran just 1 iteration of the workload.