Several applications and Tablespaces

Similar Questions

• Cannot download apps - constantly says that cc has lost functionality I have re installed several times and used the cc cleaning tool - HELP please not very impressed with not be able to use a new customer applications!

  Hi all

  New customer to CC, cc said constantly that he lost the functionality and to re - install, I have done this several times and used the CC cleaning tool. What's the point of having CC if you cannot use this?

  Thanks for your reply, but I spent some time with support online yesterday which has managed to make me sort, I do not have a UPDATER AAM file, I could not delete the contents of the OOBE folder either, I had to rename the folder creative cloud. I was sent then the application manager - who was then updated to the new until I'm able to get apps. Long-term, but it worked. I tried the procedure you have above, just not all the steps worked for me. Thanks to the Member of the support staff who helped me, I have been literally pulling my hair out!

• I'm at my wit's end. I tried to re - install Creative cloud for about 3 hours (just today) and won't have a chance.  I uninstalled all Adobe applications and cleaned all adobe applications. I tried several times to reinstall, but I get an error message 20

  This is the second time I met a problem of creative cloud app update. It prevents other applications adobe update and frustrates me no end. In June, I lost a month

  time to try to solve this problem and I am now in the same boat once more.

  I uninstalled all adobe products,

  I ran the vacuum cleaner on everything.

  I deleted the contents of ""~/Library/Application Support/Adobe/AAMUpdater/1.0/ " "

  
  

  I tried opening the page of Adobe Photoshop Elements and have a creative cloud installation (it was the previous fix that does nothing now)

  I tried several times and at the end upward at the same place with error code 204 pointing me to a page that says nothing about the error code 204.

  I checked these suggested links

  Creative Cloud connection update error - U43M1D204

  Error 204 downloading Creative Cloud on Mac

  Error download or update Adobe Creative Cloud applications

  and I tried this method (which was the difficulty that worked in June, but does not now)

  If you tried all the steps, you can try with the direct installation file:

  N ° 1)

  Click on the link below and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  Then click on the link below and download the installer directly mentioned in step 2.

  He's going to start directly from the installation process.

  Step 2)

  Windows:

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/Win32/ACCCx3_1_1_110.zip

  Extract the Zip first, then run the Setup.exe file.
  

  Mac:

  http://trials2.Adobe.com/AdobeProducts/KCCC/1/OSX10/ACCCx3_1_1_110.dmg

  now when I run uninstaller creative cloud it says '... ". uninstalled with errors"and if I try to re install Creative cloud I get this message:

  "It seems to be a problem of access to a critical file during the download. For troubleshooting tips, please visit our customer support page. (Error code: 204) »

  So please help me to get out of this endless loop and use the apps I pay to use, not to solve problems.

  No problem Ron, given that this issue needs detailed troubleshooting I would ask to contact the customer service team customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Or, if its OK, you can deposit your contact information and the best time to reach you tomorrow in a personal message for me and I will contact you and help solve you this problem.

  Kind regards

  Bani

• CC does not refresh on my Win7 machine. I tried several times and it closes after update download and try to install. Downloaed new application from Adobe, downloaded, tried to install it and received the error 50. Help!

  CC does not refresh on my Win7 machine. I tried several times and it closes after update download and try to install. Downloaded new application from Adobe, downloaded and tried to install received error 50. Help!

  Hello

  as strange as it may seem I'm afraid it is a challenge for Creative tool Adobe cleaning of cloud.

  Sometimes - for some reason-CC "unwilling" work. In this case you should CC completely remove and reinstall by using Adobe Creative cloud cleaning tool. (A try to uninstall by own resources is not enough!)

  I quote:... helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3 - CS6) applications. The tool removes the records facility for preliminary facilities of Cloud applications or Creative Suite creative. It does not affect existing installations of earlier versions of Creative Suite or creative Cloud applications.

  Please use: l http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.htm and follow the prescribed sequence of operations

  Sometimes, the "opm.db" file is the culprit. In this case, you must remove it.

  If necessary and for questions and so "open" Please use the cat, plus I had the best experiences.

  Hans-Günter

• R12.1.3 updated 11.5.10 and have several application servers

  Hello
  
  We are trying to upgrade the Instance to R12.1.3 11.5.10.
  12.1.3 Instance will have several application servers.
  
  I'll make a R12.1.1 Installation with Option to upgrade.
  
  What should be the procedure to several application servers?
  
  Finish the upgrade on a node of the Application, and then clone the other levels of applications?
  Please notify.
  
  Kind regards
  VN

  The current Architecture is two nodes with the Application on a node and the CM layer and DB level on another node.
  R12 Application tier is going to be on both nodes and the DB on cars.

  Please let know us on how to achieve.
  Upgrade with the node of an application and then clone or make a multi tier application node upgrade.

  Both approaches will work. However, using the cloning approach would take less time to compare several node approach.

  Thank you
  Hussein

• MultiTaskFlow liaison: Hi I have a main application and several sub these i added to my resources and using their taskFlows applications in my main application by creating the multitaskFlow binding. My problem is that how can get us currently rendered you

  Hi, I have a main application and many applications these i have added to my resource and using their taskFlows in my main application by creating the multitaskFlow binding. My problem is that how can currently get us renderings taskFlow Id link MultiTaskFlow running through an action created in our main application. Please explain if we can.

  Hello

  Try to remove the af: group in the facet of the toolbar or use this code in your bean.

  UIComponent panelBox is ae.getComponent () .getParent () .getParent ();.

  Kind regards

  Ruben.

• Satellite L100-120 cuts of sound when running several applications

  I don't know if it is a software problem, but I'm pretty sure that it is. I have an a L100-120 recently, I have not had problems with it. The problem occurred when I tried to use the laptop speakers anymore.

  At first I noticed sporadic sound interruptions when several applications are running (especially Yahoo Messenger). I thought that it was because of the CPU and memory load and I chose to ignore the problem. A week before, while I was listening to music in Winamp, speakers for laptop (Yes, I have a headset, but sometimes, I feel the need to use the speakers) serious interruption occurred on the noise and I was forced to close two processes in a forced manner.

  Then, at each reboot, the Windows theme song was interruptions and grew every song that I played, no matter what I had programs open, and regardless of whether or not I used the speakers.

  I reformatted the HD and the problem disappeared. Unfortunately, today, I met the same problem, the same Messenger - situation of winamp and everything has stopped working properly again. At each reboot Windows high loading times and every song I play interruptions, even if the RAM memory seems rather free.

  I tried: defragmentation, clean registry, anti-virus, own system process...

  I don't know if there is a real problem of YM.

  Hello

  A question: did you play music files from the HARD drive?

  If yes yes maybe that's the problem. I think the noise interrupts because more enforcement are running and access the HARD drive Assembly.

  But it is not if you listen to just the music without running applications?
  It happens if you play the music from the CD?

• I have photos crashes as soon as it is opened.  I repaired permissions and restarted several times and it still crashes.  Help.

  I got-photos crashes as soon as it is opened.  I repaired permissions and restarted several times.  Can you help me.  OSX 10.85

  Need to know a little more to help - what kind of error message you get when it crashes? Look in the Console application and select 'All Messages', and note what kind of new messages appear when you try to run iPhoto.

  Other programs have similar problems or just iPhoto?

  Good luck...

• My guest user account has stopped working after the installation of several windows and IE9 updates.

  I recently installed several windows and IE9 updates. During the install IE9 I stopped the installation process, because it seemed that I had two IE9 installs go. I ended up cancelling the installation so IE9 has not installed. I tried to install IE9 again and this time I can't stop installation, and it has been successful. I checked the other user profiles to make sure that everything has been installed, and that's when I noticed that my guest account wasn't just all users accounts were working well.

  Whenever I try to open a program, for example: Internet explore, any Office program and even the calculator another window opens asking me to manually locate the file I'm looking for. I am able to locate the file and open it, but as soon as I close I can't reopen unless I have to manually search for the file. There is a checkbox indicating that it automatically uses this file with the program but I can't check the box (its in a light gray that I can't click on) and I don't want to manually search the file everytime I open a program. I tried using a restore point before updates, but which did not set can guest account everyone please help?

  [1] I need to correct me by declaring that the Mcafee subscription is 18 months and its due for renewal in June, then yes its still the preinstalled version.

  [2] will certainly be your advice on that. Should what drivers I roll back?

  [3] I thought to go on this forum first, but I chose it because the error occurred while I was updating, but I'll post my question it too

  A1A. Ah! The application is named McAfee Security Center by chance?

  A1B. Do you plan to purchase a subscription for this or any other McAfee application (which you would need to do so BEFORE the expiry of 18 months 'advance')?

  A2. In re the restore drivers, you restore the drivers that you have installed via Windows Update. that is, Intel G45/G43 Express Chipset (graphics driver or screen) and Realtek PCIe GBE Family Controller (NIC driver). Again, this is a long shot.

  A3. Please do that start new thread immediately.

• Which applications and drivers get I need once I clean installed my Acer Aspire One 725 Windows 10?

  I already upgraded my Acer Aspire One 0725-10 Windows.  However, it seems to be an incompatibility with some of my courses installed applications and drivers that several questions.  Microsoft support reviewed my concerns and concluded that a clean install of windows 10 would be the way to go.  Before doing this, it would be probably good get applications and drivers that will be needed after the installation.  If anyone can provide me with a list, it would be greatly appreciated.

  Most of the drivers will be updated by windows update when connected to the web.

  on the applications, I think that Acer launch Manager is required to use the Fn keys:

  http://global-download.Acer.com/GDFiles/application/LaunchManager/LaunchManager_Acer_8.00.8101_W81x6...

  but... I read some discussions on the issues on windows 10 with Acer launch manager, worth a try to install.

  to check if all the drivers are installed and work properly, after verifying that all updates are installed:

  Key of the Windows logo + x
  Click on Device Manager

  If the yellow exclamation point is present
  Double click on it
  Choose the tab "Details".
  in the drop-down list, select HardwareIDs
  Click the first value and paste here

• Several applications crashing with Faulting Module "StackHash_"... »

  Hi, I'm new and this is my first post.
   
  I'm in this nightmare for several months, any help would be more then appreciated.
   
  Keep a huge list of demands on crash again and again, among them are: Windows Media Player - VLC - COM Surrogate - Photo Gallery Windows Live - VirtualBox - Microsoft Silverlight - Windows Explorer - XPS Viewer - Windows Live Mail - doPDF8 - PerformanceTest - HP SimplePass - TeamViewer - Windows support center - and many others.

  When you look in windows "Action center" in the "reliability monitor", most of them were listed in the field 'Fault Module name' something 'StackHash_' followed with four numbers or numbers. for example, "StackHash_7001" or "StackHash_4ac5". A few other applications overwritten is the module failed 'ntdll.dll '.

  IV ' e searched all around solutions to this unfortunate problem, the solution only so-called for it I found some answers so that he could have to do with DEP and they advised to turn off DEP for these applications crashing, but this isn't a solution at all because my system is 64-bit and so are most of the applications , and "you can not set DEP attributes on 64-bit executables."

  IV ' e had already restored my laptop to a factory State. but the same thing again later.

  PLEASE CAN SOMEONE HELP ME?

  I use Windows 7 Home premium edition, on my HP Pavilion dv6-6c13cl.

  UPDATE:

  Already found the cause of the problem, it's an update of windows as an option for the "Advanced Micro Devices, Inc. - Display, other hardware - AMD Radeon (TM) HD 6520 G. Uninstalled, and so far, everything is OK.

• Receiver 907 cod invalid after UpdateJad on the main application and library

  Hello world

  To distribute my BlackBerry live app (OTA) in the past, I would pack my main application, MyApp, and package a linked library application, MyLibrary, containing the main application resources separately.  I then copy the JAD/COD in demand for library files in the same directory as the JAD/COD of the main application files and run UpdateJad.exe on MyApp.jad and MyLibrary.jad.  At this point, I would download all the files on my web server (with the correct .htaccess file) and I could download my application on devices without problem.

  It was some time ago (one or two years).  Now, I'm updating my app and try to do it again.  However, I noticed that when I have my main application, Eclipse generates files JAD/COD for BOTH the application of the library AND the main application in the same directory of the main project of the application (deliverables > Web > 7.1.0).)  I don't think what happened in the past.  This directory contains now:

  • COD for MyApp files
  • Files of COD to MyLibrary
  • MyApp.jad
  • MyLibrary.jad
  • MyApp_full.jad (I don't remember this being produced in the past, either)

  Now, I tried to download my application in several ways, and each way gives an invalid "907 COD: error

  • Download the generated directory-is (and trying to download MyApp.jad AND MyApp_full.jad)
  • UpdateJad.exe running on MyApp.jad and MyLibrary.jad
  • UpdateJad.exe running on MyApp_full.jad and MyLibrary.jad
  • Only copies files from the generated directory MyApp and combining them into a new directory with the generated files to the separate project MyLibrary, packed (and UpdateJad.exe running on MyApp.jad and MyLibrary.jad)
  • etc... I tried practically all combinations.

  But nothing works!  However, if I install the application via MyApp.alx via BlackBerry Desktop Manager, it works.  Anyone know what could be going on here?

  Thank you!

  Hi peterstrange,

  I think I solved the problem.  I realized that I had problems downloading files on my Web server over the last two days with my standard FTP clients.  Once I downloaded the JAD/COD files to another web server, the download and the installation worked without problem (using MyApp_full.jad).

  I appreciate your prompt response to help!

• Several applications with lib install via OTA problems

  Hello

  We have several applications that use a library.  We offer them to users via OTA. So in all files jad app add us links (url, sha1 and size) to the cod of the library files. But we found the following problem: sometimes after an installation of apps on the device with a certain amount of our applications - some of them could not fail.

  Also, we have foung which, after upgrading OS to the latest version library, could not fail too.

  Everyone has the same problems and maybe a solution?

  Thank you!

  ' is not a user friendly way.

  I understand that.

  However, I have found that if you do not, then by installing a second request that contains the shared library can remove the first application.  In addition, removing one of the applications can also get out the shared library.

  This seems to be what you see also.

  Then I go back to my original statement:

  "The only way I think you can probably make sure that the shared library and apps are managed correctly using OTA downloads, is to put them in separate downloads."

  But this is only my opinion based on my experience.

• I can train the UAC? I regularly run several programs and UAC asks EVERY TIME if that's OK.

  I regularly run several programs and UAC asks EVERY TIME if that's OK.

  UAC is designed to collect want programs run without my permission.  Why can't have a list of programs that are allowed to run without hindrance when I'm the one initiating this shit to begin with?

  As far as I KNOW, there are four scenarios in which UAC does not:
  • When it is off (obviously!)
  • When the actions of the programme are not potentially dangerous.
  • When a program is run under a high count.
  • When the program is running under the system account.

  Your statement "UAC is designed to catch programs who want to run without my permission" neglects the main point. UAC is designed to prevent programs from performing potentially dangerous actions such as changing the files/system folders or by editing the registry. In other words, a UAC challenge is never directed to a specific application. She always helps that tries to make a request.

  I think it would be easy for Microsoft create a list of "good guys". I also suspect that it would be just as easy for programs not allowed to populate this list without your knowledge, so beating UAC in no time at all.

• The schemas are required to export an APEX application and the EE DDL to itself and XE

  Source DB - Oracle 11 g 2 EA

  Target DB - Oracle 11 GR 2, 11 2 Oracle XE GR SE

  O/S - RHEL 6.5

  Application - APEX 4.2.2

  Must give up an APEX application and the underlying DDL associated with a database Oracle EE an Oracle SE and XE database.

  Patterns are required to export to accomplish this approach?

  Is there one method other than export patterns which would be preferably?  (for example export tablespaces).

  You should not deal with apex tablespace or schema APEX_040X00.

  Just follow these steps:

  (1) ensure that the APEX version is the same or higher in the target schema, upgrade if need be

  (2) discover patterns of the application (NOT APEX_XX) pump and export data those and import them into the target schema.

  (3) in the target database, create a different workspace and the link with the schemas imported analysis

  (4) export enforcement APEX of source database in the target database.

  If you expand the app, better to talk to the one who did it. Make sure that the Images, CSS, JavaScript files are added as objects of support and those that are then exported (to step 4).

  Basically don't worry about APEX_O40X00 scheme, as long as your Apex versions match, it will be the same and will be automatically filled with metadata in the application import and export performance.