Several Boot Camp Partitions appearing

Similar Questions

• Boot Camp partition appears twice in the library Virtual Machine

  I am running Fusion on an iMac (10.5.6). Once I upgraded to Fusion 2.0.2 from 2.0.1 library Virtual Machine app started listing the Boot Camp partition twice. If I had my choice that would get rid of two of them. I will not start in the merger's Boot Camp partition. If it had gone I would not accidentally choose him more. Anyway anyone know how I can remove at least one partition Boot Camp Virtual Machine library app list entries?

  Thank you

  Mike

  Take a look at: duplicate entries on the Virtual Machine Library dialog box

• Windows 10 could not locate the boot camp partition

  I'm trying to install 10 Windows on an iMac end of 2015 with a 512 SSD.  With the help of Boot Camp and an ISO of Windows 10, I am able to create the Bootcamp partition and the iMac restarts in the Windows of Windows installation. I enter my product key for my Windows 7 DVD and reach the screen showing partitions.  I select "disk 0 Partition 5 Boot Camp" partition and click on 'Format' according to the Apple support document.  The partition is then renamed to 'Drive Partition 0 5'.  When I select the next button, I get the following error message:- "we couldn't create a new partition or locate an existing one.  For more information, see the Setup logs files'.  The Windows Installer does not progress.  I deleted the partition several times using bootcamp and restarted the installation and always get the same failure.

  Any advice on how to install Windows would be greatly appreciated.  Boot Camp 6 will let me install Windows 7 on the iMac and so I need to use Windows 10.  I guess the Windows 10 ISO downloaded from Microsoft will work with the Windows 7 product key and Setup seems to accept it.

  Please, disconnect all external storage devices to your iMac and run the following two procedures.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  and now try BC Assistant.

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• Lack of the boot camp partition

  I use El Capitan OSX and I decided to install boot camp. I began installing Windows 7 and it has 100 GB. After installation in the Boot Camp Assistant the Macbook restarted and then appeared the installer of Windows 7. I started to install but then appeared the first problem - he says it takes 200 MB to install, but I had only 170 MB of space free (?) and is clearly not true, I always 70 GB left in the Mac OSX and 100 GB in the Windows side. So it will not let me install Windows...
  The second problem is that it is not a boot camp partition, but it took 100 GB of memory of my Macbook. I tried to uninstall everything through the Assistant Boot Camp, but the only thing it allows me to do is to install a new windows and new partition...

  Please help ASAP!

  1. in what year is your MBP?

  2. If you tried an EFI (depending on your Mac) installation, this reference (200 MB/170 MB) is generally the EFI partition.

  3. your OS X CoreStorage volume has been reduced to 100 GB, but the creation of the corresponding partition of the BC failed.

  OS X Terminal, please after the release of

  diskutil list

  Cs diskutil list

• Using Boot Camp Partition

  When I'm in the Virtual Machine library I press the start upward on my Boot Camp partition and this message

  Cannot open disk ' / Users/rickyoder/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on.     Reason: The partition table on the physical disk has changed since the disk was created. Remove the physical disk of the virtual machine, and then add it again. »

  How can I fix this so that my Bootcamp will work?  I tried to click on rt and remove the boot camp partition, but this option is grayed out and wont allow.

  Thank you

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition (without a snapshot *) and if you have changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.  * Note that Fusion 2.0.0 may accidentally have a snapshot with the partition Boot Camp, Virtual Machine, and it should not have then you should check to ensure that the condition does not exist as well.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also be sure that you copy the entire command below "rm" line at the beginning of the "(quote) after the p in the Camp of. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion.app) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• File not found: Boot Camp partition.vmdk

  Help!   I recently replaced the HD in my MacBook Pro, then to backup cloned the OSX partition, re-created the Boot Camp partition and restored from an image of Winclone.   Start directly on Boot Camp works very well.  However. Fusion 2.0.1 I see the Boot Camp partition (power off), but when I start it up I have the msg: file not found: Boot Camp partition.vmdk.   This file is supposed to be in the OSX or the Boot camp partition?  Projector can't find anything in the OSX partition.   What should I do?

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also make sure that you copy the entire command below "rm" line at the beginning of the ' (quote) after the p in the Camp. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion.app) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• resize boot camp partition, formatted and installed windows 7 - now cannot open in vmware fusion

  Here are the steps that I took...

  1 has started with the copy of Windows XP in the boot camp partition. "This is accessible from VMWare Fusion."

  2 resized (from 6 GB to 18 GB) and formatted the boot camp partition.

  3 successfully installed Windows 7 directly in the resized partition boot camp (not through VMWare Fusion).

  4. starts in OSX (latest version), open VMWare Fusion and attempted to access the partition to boot camp/vm. Received an error message charging me to disassemble and reassemble the physical disk changes. However, since I did it, he cannot find a bootable disc, therfore making it the useless bootcamp VM.

  Any help would be appreciated.

  Paul

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also make sure that you copy the entire command below "rm" line at the beginning of the ' (quote) after the p in the Camp. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• Vista Boot Camp partition does not start

  I have been using Fusion to open my Boot Camp with Vista Ultimate installed partition.  It worked fine for months.  Suddenly, I get a windows Boot Manager error.  The message says that some required files missing.  Here's the weird: I can open the Visa using Boot Camp partition.

  Any ideas?

  Tim

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also make sure that you copy the entire command below "rm" line at the beginning of the ' (quote) after the p in the Camp. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion.app) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• The Boot Camp Partitions drive and abandon

  I am running OS X El Capitan, Version 10.11.5 early 2016, 12 inches and I am trying to load Windows 8.1 Pro using Boot Camp.  (ignore what is in the product box)

  Boot Camp successfully created a program loading of Windows, including the Apple drivers on my USB.

  I was able to successfully partition my HDD 256GB.  50 GB for Boot Camp and ~ 200 GB for my OS X.

  After the partition, the Boot Camp program is finished and I have a screen with my Mac OS disc and my Boot Camp disk.   My Boot Camp drive is completely empty.

  When I restart the Boot Camp, I gives me the possibility to remove the disc from Boot Camp.

  How can I load Windows 8.1 on my Boot Camp drive?   Should I delete the disk Windows/Boot Camp Partition and start again?

  Macs 2015 and more late do not use a USB Installer. Disconnect the external storage, launch BCA, delete the current Windows partition and start all over again. You must put the ISO of Windows in your Documents folder and it must be dismantled.

  Please see https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for help.

• -> Lion (Delete Boot Camp Partition) Snow Leopard?

  I am currently on an iMac under Snow Leopard 10.6.8 (2.4 Ghz C2D, 4 GB of RAM, with VMware 3.1.3). I have Windows XP as a Boot Camp partition, but recently, I've downloaded the tool VMware Converter from VMware and I am now running XP via a Vitural Machine (saved in the My Documents folder).

  I can't install Lion because it cannot create the recovery disk and there is an error with my scores (I don't remember the exact wording). I'm guessing that it's because of my Boot Camp partition that has XP installed on it, which is no longer compatible with Lion.

  My question is: since I converted the Boot Camp partition in a Virtual Machine, can I remove the Boot Camp partition and still be able to run XP?

  It's on my iMac at work, and I rely on XP for 75% of my work, so I make sure that I always have access to XP via the Virtual Machine.

  Thanks in advance!

  My question is: since I converted the Boot Camp partition in a Virtual Machine, can I remove the Boot Camp partition and still be able to run XP?

  The short answer is Yes.

  The longer answer is to make sure that you run only a normal file based Virtual Machine and a virtual Boot Camp Machine partition not before deleting.

  It's on my iMac at work, and I rely on XP for 75% of my work, so I make sure that I always have access to XP via the Virtual Machine.

  If there is a system of work, then you shouldn't be move to Lion still and wait for at least the first version of Lion and a version of VMware Fusion, which is officially certified to be fully compatible with Mac OS X Lion before the upgrade.

• How can I move XP on Boot Camp partition in a virtual machine on a new iMac?

  Yesterday, I bought a new iMac to replace an iMac Core Duo older. I was running XP on Boot Camp partition and using Fusion to access. As the new iMac custom supports XP on Boot Camp partition, I want to use VMWae Fusion to run XP in a virtual machine on the new computer. Is there a way to get the current state of XP (with all the security and the SP3 updates) now on my Boot Camp partition, more than one virtual machine on the new computer?

  No offense intended... Have you even read the linked web page and or documentation of Paragon go virtual?

  In short, could start the Boot Camp partition natively, install and run Paragon go virtual to create a Virtual Machine in VMware Boot Camp partition and run the resulting Virtual Machine with VMware Fusion on the new Mac.

  Then you can do what you want with the old computer after deleting the partition Boot Camp with Boot Camp Assistant as you can't keep physical installation on the old system if your running a virtual copy of it on another system without purchasing another license from Microsoft.  Also, you will need to reactivate Windows XP and other software that follows what material it was initially installed on the virtual machine.

  Note: You can even create a Virtual Machine from the Boot Camp partition with VMware Fusion in two different ways, or even to use VMware vCenter Converter such as the use of virtual Paragon to go however I strongly recommend using Paragon go virtual methods due to what I consider a major flaw in the way they create the virtual hard disk when you use the command import on the Boot Camp partition and a rate higher failure by using the other methods/software VMware VMware compared to Paragon go virtual.  For the non-technical user Paragon go virtual is the best way to go IMO and the entire process usually takes less time, then the methods of VMware.

• Can I use an ORDINARY from Mac account to load a Boot Camp Partition?

  I read the following Article on loading a Boot Camp Partition to use as a Virtual Machine in VMWare Fusion:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1014618

  I understand that I need administrator privileges to load a Boot Camp Partition in VMWare Fusion.

  But can I use a REGULAR account (Non Admin), raise my admin privileges by entering a username Admin and the password and then load my Boot Camp Partition in VMWare Fusion?

  The Article seems to imply no. because it refers only to enter an Admin password.  There is no mention to enter an Admin username.

  Can someone confirm please if I can use an ORDINARY Mac account and load a Boot Camp partition in VMWare Fusion after entering a username Admin and the password.

  Or am I have to use MAC Admin account in the first place?

  When a non-administrator user accesses an Admin-level feature in OS x, the user is presented with a combination of user name and password to authenticate.

  Then, indeed, as long as you can type the user and passes an admin user, you should be able to use BootCamp with Fusion.

• PGP Whole Disk Encryption and Boot Camp Partition

  I use the PGP 10.0 Beta for the last two weeks (it is now been shipped and is the current version), and one of the new features is Whole Disk Encryption on Boot Camp partitions. It works fine - except for the fact that VMWare Fusion 3.0.1 can not load the Boot Camp partition is encrypted (it starts initially, but does not advance beyond what I suppose is the PGP bootloader).

  I know that I can create a virtual machine and run Windows to work around the problem - I'm just curious to know if this is something that VMWare are willing to study and operate now PGP 10.0 has been shipped.

  It seems to be fixed/supported in a future version?

  Thank you very much .

  This looked interesting so I tried myself. I downloaded a demo of PGP 10.0 and encrypted to my hard drive which has OS X 10.5.8 and a Windows 7 Boot Camp partition.

  After starting the machine virtual Boot Camp in Fusion, I see a black screen that says bootguard _

  

  I guess that's also what you see?

  You're right - it's the PGP bootloader which replaced the Windows loader in the MBR of the physical disk. Fusion accesses the data in the partition through Mac OS X, which already has access to the decrypted data. The boot loader assumes that the drive is always encrypted and fails when he tries to decrypt again.

  Fortunately, Boot Camp VMs include a copy of the MBR (with the boot code and the partition table) in a separate file, so it's very easy to fix:

  #. Start the machine virtual of Boot Camp (not native!) with a Windows CD/DVD installation (or ISO image).

  #. Go to the repair command prompt.

  #. Run the fixmbr command in Windows XP or bootrec /fixmbr in Windows Vista or Windows 7 to replace the MBR code.

  In this way, your Boot Camp virtual machine will use the default Windows boot loader to access the already decrypted data, while the native Boot Camp startup will use code PGP MBR (which is always the physical disk) to access the prompt for the PGP password and decrypt the drive.

• Unable to access the Vista Boot Camp partition.

  I've got Snow Leopard 10.6.2 on an iMac Intel Core 2 Duo 3.06 GHz with 4 GB of ram.  My version of Fusion is 2.0.6.  Vista Home Premium (32-bit, of course) is upgraded to SP2.  All I am able to do is a blue screen of death when I try to access my Boot Camp by merge partition.  This senario has never worked for me.  I just use Fusion to access another copy of Windows that I designated merger.  The exact code is available on the attached screenshot.  I am able to access my Boot Camp partition without problems on a restart.  I looked for a specific answer to my problem with no luck.  The only thing I've tried so far is increase the default 512 MB available ram (I think) to about 2 GB.  Please help me to solve my problem.

  Thank you

  Sean

  This gives a test:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1007351

• Can I install the same Windows 7 as a Boot Camp partition AND a VM regular partion?

  I've been running Windows 7 regular valuation as a VM partion.  Now that it is officially released, I bought a copy and I upgraded my Vista to Windows 7 partition and then I start under Boot Camp or Fusion 3 lets start the boot camp partition.  Starting time on a partition Boot Camp is a bit longer than on a normal partition of VM, so I find myself most of the time with the assessment of partition of the VM, but in June, it will go away.  Could I take the installation disk that I used for the Boot Camp and install it also as a regular virtual machine, or which will cause insurmountable problems for activation?  I hate to have to buy another copy of Windows 7 just to get a faster speed when I don't want to use the complete as machine when I boot Boot Camp.  Sometimes, I have to give Windows the power of the machine, so don't want to only install as a virtual machine.

  gebanks wrote:

  Well, I wouldn't mind a call to Microsoft if they'd let me activate both, but don't want to waste our time if they would certainly not.  Anyone try this?

  Ask yourself if someone illegally active copy of Windows?  This would be a pretty Brave soul to admit illegal activities.  :-\

  You only have one license for Windows if you are only allowed to have a single installation to be activated at any time.  Activate a second time to remove any other installation that uses the same license (aka product key), by the Windows EULA.  Another thing is the violation of the EULA.

  The 'Microsoft police' will come knocking at your door?  Who knows.  Microsoft has billions of dollars and could very well decide to use some of those dollars to make an example of a person, like how the RIAA did to people he considers pirates.    It of ultimately your decision whether to violate the EULA or not.