Several Expressions

Similar Questions

• How to do several expressions of time?

  I understand how two expressions with time:

  if (time < 1){
       //expression x here
  }
  else{
       //expression y here
  }
  

  But what happens if I have more expressions and want to run if between specific times, for example, I tried:

  if(time = 1,2){
       //expression x here
  }
  else if (time = 3,4){
       //expression y here
  }
  
  else if (time = 5,6){
       //expression z here
  }
  
  

  
  

  But it does not work. Help much appreciated ~

  Well, you might want to read about how JavaScript works at a very general level. Your code is just doesn't make any sense at all.

  • in the programming of the point is the digital separator, not the comma
  • = is an assignment operator, not a logical operator
  • a segment has a beginning and a beginning, but you set only a specific time in your conditional statements
  • you don't have any help {else}

  After all this, you must rewrite it completely. Example:

  If (time > = 0 & times)<>

  Else if (time > = 1 & times)<>

  else {}

  Mylenium

• Expressing or lights comps through parental

  1. I have four small circles colored in a model which move vertically from the bottom of the screen towards the Center. These are 3D objects. Call this model 4 circles.

  2. I put the spotlight behind each colored circle and put in full light transmission so they coloured shadows. These four indicators are related to each of the four colored circles.

  3. when I place this comp of 4 circles in an another 3D model, called the scene, 4 circles lights do not come across. They must? I tried to push every button at my disposal.

  4. If I can't get 4 4 circles homoparental lights displays in the model of the stadium, I would like to put four new projectors in the model of the stadium and their parent to the positions of the 4 circles so that the circles are moving, so do their individual lights.

  5. I've tried several expressions but I still get an expression (indecipherable so immemorial) and I even had some AE crash a couple of times. Mkes a little sense since coordinates 3D in the circles 4 model will change compared to the precomp 3D coordinates in the compwhich Stadium, leads directly to the insoluble coordinate systems, some trying to divide by zero, without a doubt.

  6. How can I link each of the movements of the four circles of lights through the isolated worlds of the comps?

  I read everyting I can find on the collapse and precompsoing 3D.

  bogiesan

  It's easier to do by dividing the timelines, the window of the model, then using the pickwhip locking. You can also do this by closing the window of ECW.

  Here's a movie:

• Connect the Airport Extreme via Powerlink to the cable Modem

  I have problems with wifi at home as the location where the my cable modem is far from ideal. I currently connected to an Airport Extreme, which works like the router (the cable modem has the router function disabled). Attached to the AE is also a powerlink and I have an Airport Express connected to the powerlink, which has its own network.

  I was wondering if it would make sense to connect the powerlink directly to the cable modem and then put my Airport Extreme, a more central location in my home connected via Powerlink and there accumulate this way, rather than the current configuration.

  I'm getting a second Airport Extreme soon as well and I have several express in my house, but the problem is that my wifi is not fast at all.

  Powerlink adapters are Devolo 600 & 1200.

  Thank you

  I was wondering if it would make sense to connect the powerlink directly to the cable modem and then put my Airport Extreme, a more central location in my home connected via Powerlink and there accumulate this way, rather than the current configuration.

  It's always a good idea to place the 'main' AirPort router as close as possible of the area where most of the wireless devices should be used in this sense, your idea is a good thing... and in theory at least. ... .the powerline adapters allow you to do.

  However, in practice... you won't really know how well... or even if... this type of installation will work until you try you. The reason for this is there is so many different things that can affect the performance of a type of current line of the installation program.

  If you have time, there is certainly no harm in trying this type of configuration.  Post your results if you decide to try it.

• How to cancel a Boolean value

  Hello @ all,

  I'm a little embarrassed, but I didn't find any solution that works.

  I get a boolean value, hence a VI is "TRUE = success / no error. I put this value to "Step.Result.PassFail".

  Now I need the same value to another variable in TestStand, but I have to cancel, so "success = FALSE / no error.

  Is it possible that I can put the two variables (one of them denied) easily with a release of VI?

  I tried several expressions with «!» operator' to 'post' and the 'module - tab--> value cell"call VI in TestStand, but no one works very well.

  Thank you

  Another thing to add... If you look in the table, you will see that number 27 action sets the State of the sequence has failed. As the step contains a mistake, not a failure, the State of SequenceFailed is not set to TRUE...

  Norbert

• Cisco ISE 1.1.1 with Windows posturing

  Hello

  We tired for configured windows posturing here's the scenario

  We saw five ise boxes 3315 with version 1.1.1 off them 2 is admin, 2 is PS and 1 MNT

  and we have local Symantec and WSUS Server.

  We make posturing for Windows where I have a few questions

  (1) is there an integration here of the local WSUS server with Cisco ISE where Cisco ISE can automatically take all the mandatory WSUS update according to the crititcality of the WSUS server.

  (2) what is advised to set up the strategy of the Posture of the posture of windows in Cisco ISE and if manually configure windows political posture using specific KB and if there is an update available on Microsoft will we be able to configure the policy for the new update.

  (3) we have configured authentication dot1x in cisco ise and asked as well as on switch port where once the user must be connected to dot1x port of the switch it invites username and password dot1x and therefore, authorization policy, it gives vlan appropriate dynamics.

  But what are the ways where we can restrict the machine which is rather than the assets of the company and even if the user's user name and password in short any employee aware how we can restrict the user making the machine rather than the assets of the company?

  (4) can configure US policy posture for antivirus which will keep us in normal mode and at the same time, we can put posturing for windows which monioring mode which only monitor policy posture and reflected in the monitoring, log in which does not restrict the network for windows posturing

  That will be great if any one can please help me to get the issues

  Thank you

  Pranav

  What follows is under the POLICY-OF ELEMENTS of STRATEGY-POSTURE-> REQUIREMENTS > >

  

  What follows is located under

  POLICY OF-> ELEMENTS OF STRATEGY-> POSTURE->

  REPAIR-> WINDOWS SERVER UPDATE SERVICES REMEDIATION ACTIONS

  

  What follows is part POLICY-> POSTURE

  

  These settings work ALMOST flawlessly for me by forcing her we approved on our WSUS server for our group of workstations updated (all of our laptops are members of the) which meet the criteria of severity EXPRESS (critical and Important). Now, what I've discovered in the last few days is that... MS seems a bit random in their identification of what severity level they assign to their updates. For example... I think that a service pack of the operating system would be considered IMPORTANT if not CRITICAL... however... Look at this from the identification of the server WSUS from Windows 7 Service Pack 1:

  

  Thus, those who updates you deleted, I'd go throgh your WSUS server to identify how they are identified by gravity, then according to your needs set the parameters of the ISE accordingly to ensure that you get updates you plan.

  Hope this helps everyone out there who has similar problems.

  Thank you

  Dirk

• Logic of transformation

  Hello
  
  I asked about the best way to implement the logic of transformation with OWB. In my case, the source is a database and the amount of data is only a little more than 2 million lines. Extract phase I did a direct load from the source to the table in ITS phase where the table is structured the same as the source. Type of loading is TRUNCATE/INSERT. It takes two minutes to load which I think is pretty well in our environment. I've been making mappings that takes the data from the table - its, makes all the transformations and save a direct result of the dw-table (UPDATE/INSERT). All in a map. But when there is a lot of transformation in several expressions with box-when a lot of joins clauses and the research, the result is very inefficient - I think - can not be solved by tuning the plan of the explain command. I also include the surrogate_id in the Web of mapping (we do not use object dimension or cube objects, a few tables). There are situations where the data used in the expression are handled several times in the other expression which - I think - a lot of handling nested in the package. Time to update the dw table can be found on several hours... I think my mistake is trying to put too many things in the unique mapping when the order of operators can be found on the inefficient code.
  
  I was told that the best way to manage data is to extract the data from the source to the table - its is construced as dw-table. I know people who did the tampering in separate SQL clauses in a PL/SQL procedure. Do a lot of updates for SA table. The only thing to do with OWB is to transfer the data from the table'S ready at the DW table. I don't bite. I tend to think that the transformation is always possible more effective with OWB (if the mapping is designed right way) because overall according to the mode that it generates only one article SQL to do any manipulation in the unique map. Is it? I wonder three different things:
  
  (1) when to split the map to separate mappings.
  (2) can I do maps update the original table with loading type updated or are still transferred directly mappings that stores the results in the new table?
  (3) the use of tables in ITS region. When I should make transformation multimode (do more sa-tables to store the incremental result of each step)?
  
  I think that it is difficult to clarify me on this. I hope you get my point and can give me some good guidelines to follow.
  
  Kind regards
  
  Juha

  Hi Juha,

  It is not the order or the use of simple operators that make the mapping of poor performance but operations temporarily stores the data on the disc are those should I avoid - or try to minimize their effect.

  Temporary tablespace using Oracle DWH (and perhaps on other RDBMS platforms) is general. I think that it is very difficult to avoid completely the temporary segments creting in environment DWH.

  Or maybe I should concentrate on the path I have chosen and separate big joins on their own mappings and reduce the amount of joints in a mapping?

  In my view, splitting complex mapping in several mappings is the best approach in your case.

  Kind regards
  Oleg

• My older version of outlook express has several problems, will be these imported into a new account in thunderbird

  My older version of Outlook Express has acquired several problems. It is time for a change, these errors will be imported into a new account in Thunderbird. I hope that everything is based on the conviction that the two programs are completely different.

  You don't say what problems you have with OE, then how everyone has to guess?

  There is no such thing as a "Thunderbird account. You do not have an account with your email provider. To access this account, you can use OE, or Thunderbird.
  But Thunderbird isn't your e-mail provider.

• My Airport express continue flashing Amber after several resets. AirPort Extreme base works fine. Express does not appear in airport utility.

  My Airport express continue to Flash Amber, and do not appear in airport utility after several resets according to manual. My base station is plugged in and working correctly and the display in the airport utility. At the express need of repair?

  What exact model of the AirPort Express you have? How long have you had?

• I renew the DHCP on my Airport Express Extender several times a day.

  I have a time Capsule airport connected to an ATT Uverse router mode bridge as my wifi router.  I have Airport Express 6 throughout the House using wifi Extender.  I have to renew the DHCP lease on a large number of Extenders several times a day to keep them in line.  I saw a few discussions online about this problem, but have not found a solution that works.  Anyone know the problem?

  I have a time Capsule airport connected to an ATT Uverse router mode bridge as my wifi router

  Does that mean that the Time Capsule is in Bridge Mode... or... does that mean that the ATT Uverse router is in Bridge Mode?

  Help if we understood what operating system you use the device that you use to administer airports.

• Outlook Express wants to compact files several times per day

  I deleted most of my Deleted messages and sent folders and I greeted the OE to go through the process of compaction, but happens several times a day and it's driving me crazy!   I went into the Maintenance tab under Tools, but it doesn't seem to be a solution.  I have to save at least 3 months of messages in these files for commercial purposes.  What can I do to prevent it from appearing?

  Compacting does not delete messages, only the space wasted. If you don't lose messages, it's either because of damaged files or disrupt the process of compaction.

  If you compacted it completed successfully, and you see the prompt earlier that 100 closures of OE, then see if you have Windows search installed. If you do, you need to tell Windows Search to stop indexing OE.

  In the control panel. Indexing Options. Change. Clear the check box for Outlook Express.

  If you have lost messages during compaction, see this.

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.

  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone

  Recovery methods:

  If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.

  To restore a folder bak on the message store folder, first find the location of the message store.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.

  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.

  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.

  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.

  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:

  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx

  And see:
  http://www.oehelp.com/OETips.aspx#4

  A general warning to help avoid this in the future:

  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• When I send an email from Outlook Express, it is sent several times, usually happens when sending electronic mail to the affiliate

  When I send email to the affiliate, it will send several times, fill their Inbox, and then the returned several e-mails to fill my Inbox. I have sent emails of the sample to my personal account, and that works well, except when I attach a pdf file, then it send twice. How can I fix?

  Tools | Accounts | Mail | Properties | Advanced. Uncheck the box: "Break apart messages...". ».
   
  If that does not she, you have corruption of dbx files.
   
  Create a new Outbox and sent items folder.
   
  Follow these steps for the Outbox and sent items after you move the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE.
   
   
   

• Sent in Outlook Express email is sent several times. How can I stop this?

  Outlook Express problem

  I have a problem with mail going on Outlook Express 6. outgoing mail is received by the recipient, but email remains in the Inbox and is continualy sent causing the recipient receive several emails until I have remove the box in. When I knew him send receive button a yellow triangle appears with one! in the middle and a message that reads send 1 Message (s) using "pop3. hosts.c... and under the status tab, it read Warnimgs and under the connection tab, it reads Local Area Netw... I scanned with Norton 12 and Microsoft all is clean, can anyone help
  1. Create a new box of sent, and sent items.
  2. Clear analysis of the e-mail.
   
  **********************************
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  
  http://www.oehelp.com/OEBackup/default.aspx 
  **************************************
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  The way most effective to do this is to completely remove the program anti-virus and then perform a custom installation. When the possibility of withdrawing the e-mail analysis arises, remove. 

• How can I stop Outlook Express sends several empty messages with attachments

  How can I stop Outlook Express sends several empty messages with attachments

  Not a lot of information, but CrystalBall © says:
   
  Tools | Accounts | Mail | Properties | Advanced. Uncheck the box: "Break apart messages...". ».

• Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) failed to install several times with an error Code: 0xD59.

  I have a Dell Vostro 420 - Windows XP. Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) failed to install several times with an error Code: 0xD59.  Please help me understand this and get this installed!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for SQL server support. Please post your question in the Sub forum.

  Link: http://social.msdn.microsoft.com/Forums/en/sqlsetupandupgrade/threads

  For reference: how to solve the packets missing MSI or MSP during SQL Server Service Packs, hotfixes or cumulative updates: http://support.microsoft.com/kb/2015100