Several Livestream with FMS

Similar Questions

• Connection failed with FMS

  I have an app with streaming video live. When this application runs in within our proxy server (where server multimedia adobe is conserved) its works well. When the client attempts to stream video of his agent, he repeatedly received netconnection.failed State. After a very long time it connect, but it still continuous to the Publisher for a few seconds, and then it disconnected with the FMS. When it try to connect it again gets netconnection.failed State on several occasions. I tried with a few parameters such as:

  (1) httpident2 setting enabled on 'true' with FMS Ip_serveur.

  (2) the only file on the server taking care of the file stream is main.asc, no application.xml in this folder, no allowhtmldomain.txt, no allowswfdoamin.txt in the folder file (I tried with keeping them also).

  Still the same thing happens when I'm using the client side OUT and connection and streaming to our FMS.

  I use FMS interactive Server 4.0.

  Please suggest.

  Thanks in advance

  I used rtmps with port 443 and the problem is solved

• I used to reload a page that several times with just a long wait on the F5 key, but now it hard to do 2 refills with even a prolonged pressure on F5?

  In the past, I used to reload a page several times with just one press the F5 key, with pressing long it charge more often, now long or short by pressing the F5 key is sufficient to reload a page or two times

  OK guys, I found the problem, it was because I had MCAFEE Advisor which limited my refreshes, but when I disabled it, everything is back to normal, loool

• Can I have several structures with the same case of event event?

  Hello

  I do an application which reproduces the front of the power supply HP6675A. To do this, I did a machine to States with different States

  (initialize, measures, voltage, current, ocp, ov, store, recall, etc.). In each State, should have a structure of the event that attracts the events of the buttons, as for example: If the current state is the voltage mode and the current button is pressed the next State will be the current mode. For this purpose in each State of the state machine should be the same structure of event with the same events.

  My problem is that the Vi does not work properly when I have several structures with the same case of event event. There are some possibly to do and how? Or is impossible to have several events? I read a few posts, but I can't find solutions.

  Any help is appreciated.

  Thank you very much.

  In general, you should have 1 structure of the event in your VI.  In your state machine, the structure of the event should be in "pending" status  So you will probably start in the State of the initialization and then spend idling.  Then, the user presses the present button.  If your state machine should then, go to the current state and then return to Idle.

• How can I create several rectangles with a draw rect.vi

  How can I create several rectangles with a fire rect.vi? Thank you

  Like this...

  -DP

  

• ISI t possible to use several screws with state diagram module

  Hello

  I'm doing a request using the module state diagram, and I have to use at least for VI I developed. I have problems when I want to set the entries before creating different States. My VI have stop buttons and the e/s I need to use. I have the same problem with the outputs. Because I can not set the input/output (type moore machine) I can't nor define the guards and actions that the state machine must fallow.

  You have an idea if we can use several VI with this module or do I have to use the good old box + all state machine technique.

  Thank you.

  Of course, this is possible.

  

  hope this helps,

  Norbert

• Create several folders with several folders in the rapids

  How can I quickly create several folders with a specific set of folders in each of them?

  for example:
  Folder1-> test1, test2, test3...
  Folder2-> test1, test2, test3...
  Folder3-> test1, test2, test3...
  etc.
  I want to create several folders named specifically with an ID I'll specific, and in each of these cases, I would like to have a set of folders.
  Thank you for your help.

  Hello

  Check out the steps suggested by Steve Winograd and TechHead74 in http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/how-or-can-i-create-numerous-new-folders-instaed/a2a67066-7e97-47b3-aba4-8e8a1a460ca3

  Hope this helps you.

• Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) failed to install several times with an error Code: 0xD59.

  I have a Dell Vostro 420 - Windows XP. Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) failed to install several times with an error Code: 0xD59.  Please help me understand this and get this installed!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for SQL server support. Please post your question in the Sub forum.

  Link: http://social.msdn.microsoft.com/Forums/en/sqlsetupandupgrade/threads

  For reference: how to solve the packets missing MSI or MSP during SQL Server Service Packs, hotfixes or cumulative updates: http://support.microsoft.com/kb/2015100

• When I print I get several pages with a feel a little on all the pages I want to print

  When I print, I get several pages with what I print with a few lines on each page until what I printed is finished.

  mamorse,

  Thanks for the additional info. Lets try to download and execute printing and scanning doctor found here. It may fix a lot on its own, but otherwise it will give us a better idea of what is happening. The weakness of the signal is not likely the culprit (because he worked for a long time) but we can try to change that if other steps fail.

• I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL

  Hello.

  Here are some files dump of my crashes: http://cid-5cfec8d823e42bd3.office.live.com/browse.aspx/.Documents

  Here's what happens:

  Since June, I've had several accidents with the blue screen noting CRQL_NOT_LESS_OR_EQUAL (Yes, CRQL, no IRQL level), and they are producing at closer intervals. I also notice some changes of office and some sounds to open files that are not have happened before. I run antivirus and malware and found nothing. I did a disk cleanup and defragmentation.

  I also tried to install via Windows updates and everything seems to date. I ran Windows Memory Diagnostic tool, and it found no errors. I ran Windows Startup Repair and got the following note:

  Root Cause found.

  Unknown bug control: one error checking.

  Parameters = 0 x 0, 0x817dc32c, 0x820e8114, 0 x 0.

  After the last crash, I got a message saying that Windows is aware of the problem and trying to fix it. Any ideas?

  
  Thank you in advance for your help!

  Hello

  Uninstall Faultwire and look for the codes manually as needed. The link to troubleshooting blue screen
  page will show you how to get them.

  How old is the system? A real computer store (not the leeks and glances at a Best Buy or other large surfaces)
  Stores) can help to give a proper diagnosis of the machine.

  You can use Safe Mode - repeatedly tap F8 as you start - use to back up your data in a redundant
  way off the machine. Then re-install Windows that "might" help if the problem is software partner.
  Of course, you will need to reinstall your programs and restore the data in the machine.

  Although there are a large number of errors there could be a cause for all. Try to remove ALL power and
  reinstall all the memory cards and cables (at both ends, when possible) - actually delete and replace.
  do not just tight. Clean the dust bunnies (of course those who are for a PC - for a laptop to ensure that)
  the vents are clear). Try using a small fan blowing through the vents to see if heat is a problem.

  Update key drivers - display/video, NETWORK card and WiFi (network), sound (do not forget to check the sound card drivers
  What update because they will often rollback then repeat the installation until the correct version appears), modem
  and all of the other major features, you could have as 3rd party mouse or keyboard.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to change the extensions on several files with Windows 7?

  * Original title: Extentions

  How to change the extensions on several files with Windows 7?

  You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

  Rather than we guess, please identify your «film» software

  Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

  IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

  As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

  Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

  File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

• Several problems with Windows 8 - Upgrade-unable to download full

  Original title: several problems with Windows 8

  Last Sunday, after downloading Ab2word, my tiles shortcuts stop working. I have uninstalled the program, but nothing improved. I made an update of Dell and got the shortcuts work again (curiously I could always connect via the desktop). now, I get a message saying that Windows is disabled and to enable him, by putting in... but he says that it is impossible to activate. Then I tried the upgrade to 8.1 by the store and got a message saying that I was unable to complete the download. Now my shortcuts tiled work, but they open the sites registered by the office, not as a full screen. I tried to restore to the factory and now get the message that the system is unable to restore. I ran a dell diagnostic and it showed nothing. I did a full security scan and he came clean. I'm rapidly reaching crisis. When you try to seek help on the Web site, Windows 8 is not listed... It is 7 to 8. 1. any suggestions? This computer is less than 2 years old and I'm ready to take a hammer to it.

  Hello David,.

  Please write to us and offering the opportunity to help Microsoft Community.

  What exactly do you mean when you say "Windows is disabled and enable it via the setting..."?

  You receive the "Cannot download" error during upgrade to Windows 8.1, I'll follow the steps by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

• Removal of several tables with only loop FORALL

  I need to remove the data from several tables with unique FORALL. It seems that FORALL does not support. Please let me know the alternatives to achieve this goal.

  DB version: 11 GR 2

  Write switchis for all instructions, one for each deletion. There is no reason why it should not work.

  Compare:

  PLSQL 101 :

  Here are some things to know about FORALL:

  Each FORALL statement can contain only a single DML statement. If your loop contains two updates and a deletion, then you will need to write three statements FORALL

• I have Acrobat 10 when I try to combine several files with names like 0022_0_ point report, report 0022_2_Item by report 0022_15_Item it combines out of use.  Any ideas?

  This is how it brings together files I have Acrobat 10 when I try to combine several files with names like 0022_0_ point report 0022_2_Item report through report 0022_15_Item it combines out of use.  Any ideas?

  

  Hi tomp29181935,

  Please refer to this page:placing the pdf of the numerical order when combining (combining files)

  Let us know if you face any problem.

  Thank you!

  Shivam

• Hello, I would like to know if I can install the software on several computers with my creative cloud. Thank you

  Hello, I would like to know if I can install the software on several computers with my creative cloud. Thank you

  Hello

  You can install and activate creative Cloud on two computers applications, regardless of the operating system of the individual associated with the composition of the creative cloud. See the page of the product license agreements for more information.

  Link: http://www.adobe.com/in/products/creativecloud/faq.html#what-cc

  Let us know if this helps!