Several node Plugin - invalid attribute type: properties
Hi all
I have installation multi-user plugin. The workflow fails with the error "invalid attribute type: properties. One of the parameters on the flow of working remotely is a "Properties". It works fine without setting of type of properties. Y at - there no limitations on the types of parameters for multiple node plugin.
Thank you
Hello
Looking at the source code of the plugin multi-Node, it seems that not all existing parameter types are supported, including Properties and the properties of table /. Not sure if this is the case of the design, or if it is an incomplete implementation / bug (it's probably the last).
Tags: VMware
Similar Questions
-
Hello
I was converting some workflows that had a lot of scriptable task in a single workflow, in separate workflows to be re-used.
In the original workflow, I had certain attributes, and one of them was properties. Its value has been set and then during a Sciptable task. And was then used with another task scriptable.
Now, I've converted the workflow with a large number of workflow sup, one of them gets a value lay in attributes of a type of properties. Then I'll in another under workflow then she pass this same attribute. And now I see that the attribute is now empty.
I don't seem to see this behavior with attributes including the type string. It seems to happen only with the properties one. Is this normal? What can I do to work around it?
No problem... you can mark my answer as correct? There are VERY few cases where its expected for you to have a validation error. Each time a warning pourrait be ok, but actual errors I can't think all time than those who are ok. In General, you should always be able validate properly.
-
Creating pdf with lines Qty and total order forms, I want to format the fields as number with 0 decimal places for the qty column and the sign $ and 2 decimals for the totals column.
Why when choosing several fields quantity, then go to properties, the format tab disappear? Why do I have to choose and the format of each field one at a time? They have the same type of field.
I'm working currently on a document with more than 200 fields are most of the quantity fields and others are total fields. I right click on each field individually.
It's 2015! Can you imagine if Excel did it?... Adobe WTF?
Only the Adobe developers can answer why it is like that, but it's unfortunately.
The only solution is to use a script to set the Format setting for several fields at the same time.
I developed such a tool, so if you are interested you can get it here: Scripts custom Adobe: Acrobat - Format applies to several text fields
-
I have developed and delivered a system in Germany several years ago. He worked then. But the cRIO was damaged and replaced by a newer model, and does not now. I suspect (and Support technical OR agree) it's a problem of software version, which could be solved with the NOT-MAX Software Installer. But I do not have access to the system myself, and correspondence is slow and tedious.
The original system was a cRIO-9073, developed with LabView 2009. He used the implicit Messaging. The ID of Instance, sizes, IP addresses, etc everything has worked very well.
The current system is a cRIO-9074, with LabView DURATION 14.0 (I guess that LV 2014), Scan Engine 4.3, NI - Industrial Communications for Ethernet/IP 14.0.0, etc. Programs FPGA and processor are responsible and seem to work in the cRIO. The "EthernetIP Set Assembly Instance Data.vi' will return no error. But the PLC just pointing out "(Code 16 #0315)" connection request error: invalid segment type "." We looked at intellectual property (the mistake was different), sizes and body #s.
The PLC doesn't have to all be modified.
Anyone know if there is no problem of compatibility with LV-2014 and Ethernet/IP 14.0.0? Or if there are all the other required packages?
I am including the NOT-Max reports.
Hi ZX81
To help you 2009 application to work with the new cRIO, you must deploy it to the device. You must in order to deploy the cRIO, make sure it has the same versions of software that you used with the old cRIO.
You can format the cRIO NI MAX and deploy the application of LV, 2009. However, if you do not have access to the cRIO or your client does not have the necessary software, you can deploy the application in another cRIO with software (cRIO same model and same modules as your client) and create a picture of it and send it to your customer so that it can deploy the cRIO even without the software on his computer. The following document explains how to do this.
WenR
-
Hello
I created a based EO VO in which a column is recovering value per query:
VO request is:
SELECT principalEO.LOAN_ID,
principalEO.LOAN_NUM,
principalEO.DESCRIPTION,
principalEO.FROM_DT,
principalEO.TO_DT,
principalEO.COMP_ID,
principalEO.COMPANY_NAME,
principalEO.PROJECT_ID,
principalEO.PROJECT_CODE,
principalEO.PROJECT_NAME,
principalEO.LOAN_AMT,
principalEO.LOAN_SANCTIONED_AMT,
principalEO.LOAN_DISBURS_AMT,
principalEO.LOAN_PROCESSING_CHARGES,
principalEO.INTERST_RATE,
principalEO.INTEREST_AMT,
principalEO.PRINCIPLE_REPAYMENT,
principalEO.TDS_RATES,
principalEO.SYNDICATION_FEES,
principalEO.SYNDICATION_PAID_TO,
principalEO.VENDOR_ID,
principalEO.VENDOR_NAME,
principalEO.VENDOR_SITE,
principalEO.INSTITUTION_TYPE,
principalEO.LOAN_TERM,
principalEO.LOAN_TYPE,
principalEO.SECURITY_DET,
principalEO.REMARKS,
principalEO.INVOICE_FLAG,
principalEO.EMI_DATE,
principalEO.DISBURS_DATE,
principalEO.ATTRIBUTE4,
principalEO.ATTRIBUTE5,
principalEO.CREATED_BY,
principalEO.CREATION_DATE,
principalEO.LAST_UPDATE_DATE,
principalEO.LAST_UPDATED_BY,
principalEO.LAST_UPDATE_LOGIN,
principalEO.EMI_AMT,
principalEO.EMI_AFTER_MONTH,
(select from_dt in the omx_sec_loan_repay where loan_num = principalEO.Loan_num and paid_amt is null and rownum = 1) AS LAST_PAYMENT_DT
OF OMX_SEC_LOAN_PRINCIPAL principalEO
now I have to apply validation, from date should not be before Last_payment_dt
Controller code I've written is:
If (pageContext.getParameter ("updateloan")! = null)
{
String LoanNum = (String) pageContext.getParameter ("LoanNum");
OAViewObject vo = (OAViewObject) am.findViewObject ("LoanUpdateVO1");
Line OARow = (OARow) vo.getCurrentRow ();
Date FromDt = (Date) row.getAttribute ("FromDt");
System.out.println ("date is:" + FromDt);
Date lastpaiddt = (Date) row.getAttribute ("lastpaiddt");
System.out.println ("date is:" + lastpaiddt);
}
When I turn the page, error:
oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: Houston-25058: lastpaiddt definition of the attribute type is not found in LoanUpdateVO1
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException (unknown Source)
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors (unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest (unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage (unknown Source)
at _OA._jspService(_OA.java:71)
When I give another deposited instead of lastpaiddt, it works fine...
Hello
Looks like the attribute is missing, can you check if the attribute named "lastpaiddt" exists under LoanUpdateVO1?
Right-click on LoanUpdateVO1 - > properties - > list of attributes - > and check if the missing attribute exists
Kind regards
Had
-
Invalid column Type error - Jdev 11.1.2.3 on Redhat 5.8
Hello:
I created a simple Web ADF application with a single table.
Test1 uses the HR schema and the db connection is also HR and everything works fine.
Test2 uses a (partner) schema that is different from the logged-in user (admininn) in about DB. In sqlplus, I can update the table as a logged-in user. For DB grants are ok.
But in the ADF app, when I try an update, I get an error: exception for invalid column type. See error below.
When the owner of the schema is different from the db connection, I get this error even if DB subsidies are in place. What Miss me?
Thank you very much
Note: the DB connection connects as admininn no PARTNER. But DB subsidies are in place to allow admininn associated schema update.
[386] built select: "SELECT CLI_KEY, CLI_NAME, CLI_SHORT_NAME, CLI_TYPE, CLI_LAWSON_ID, CLI_ACTIVE, CLI_COUNTRY PARTNER. CLIENTS Clients
[387] enforcement of LOCKING... SELECT CLI_KEY, CLI_NAME, CLI_SHORT_NAME, CLI_TYPE, CLI_LAWSON_ID, CLI_ACTIVE, CLI_COUNTRY PARTNER. The CUSTOMERS Customers WHERE CLI_KEY =: 1 FOR UPDATE NOWAIT
[388] where the link param 1:263
OracleSQLBuilderImpl.doEntitySelect [389] failed...
[390] java.sql.SQLException: invalid column type
at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:11256)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:10605)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:11665)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:11631)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObject(OraclePreparedStatementWrapper.java:253)
at oracle.jbo.server.OracleSQLBuilderImpl.bindWhereAttrValue(OracleSQLBuilderImpl.java:2306)
at oracle.jbo.server.BaseSQLBuilderImpl.bindWhereClause(BaseSQLBuilderImpl.java:2300)
at oracle.jbo.server.EntityImpl.bindWhereClause(EntityImpl.java:10784)
at oracle.jbo.server.BaseSQLBuilderImpl.bindWhereClause(BaseSQLBuilderImpl.java:2283)
at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:840)
at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:552)
at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8311)
at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:5971)
at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6491)
at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6707)
at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3264)
at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3067)
at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2071)
at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2352)
at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1590)
at oracle.adf.model.binding.DCDataControl.callCommitTransaction(DCDataControl.java:1415)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1428)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2169)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:731)
at oracle.jbo.uicli.jui.JUActionBinding.actionPerformed(JUActionBinding.java:193)
at oracle.jbo.uicli.controls.JUNavigationBar.doAction(JUNavigationBar.java:412)
at oracle.jbo.jbotester.NavigationBar.doAction(NavigationBar.java:112)
to oracle.jbo.uicli.controls.JUNavigationBar$ NavButton.actionPerformed (JUNavigationBar.java:118)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6289)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6054)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4652)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
to java.awt.EventQueue.access$ 000 (EventQueue.java:85)
in java.awt.EventQueue$ 1.run(EventQueue.java:603)
in java.awt.EventQueue$ 1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged (Native Method)
in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)
in java.awt.EventQueue$ 2.run(EventQueue.java:617)
in java.awt.EventQueue$ 2.run(EventQueue.java:615)
at java.security.AccessController.doPrivileged (Native Method)
in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)Check the OS type for each attribute. Number should be oracle.jbo.domain.Number.
VARCHAR must be java.lang.String. Date should be oracle.jbo.domain.Date -
Invalid column type - <; DCBindingContainer >; <; cacheException >;
Hi all
I drag and drop a viewobject to a form of the adf. The viewobject is a mapping to an entity object. I do not have any type of data in the form change. I got the following error when I try to save the change to the object.
Please help me on how to debug this problem.
Thank you
David
< DCBindingContainer > < cacheException > [5145] * updated BindingContainer cache EXCEPTION: oracle.jbo.DMLException
< DCBindingContainer > < cacheException > [5146] java.sql.SQLException: invalid column type
< DCBindingContainer > < cacheException > [5149] * updated BindingContainer cache EXCEPTION: oracle.jbo.DMLException
< DCBindingContainer > < cacheException > [5150] java.sql.SQLException: invalid column type
< DebugDiagnostic > < print > DBG [5163]: afterActionPerformed: engage
INFO 23/04/12 11:02:29, 157 [ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] (PopupBaseBean.java:61))
< Utils > < buildFacesMessage > ADF: addition of the JSF error message: invalid column type
java.sql.SQLException: invalid column typeNothing obviously wrong...
check if the indicator in the VO and EO attribute is character and not string...Timo
-
802. 1 x with dACL - prefix of an invalid attribute: "ACS."
Dear all,
I spent half an update to fix this problem without success, I hope you could help me.
I configured a simple solution of 802. 1 x on a PC driver who must authenticate through PEAP-MSCHAPv2 users against my user database internal GBA.
Version of the switch:
Model number: WS-C3750V2-48PS-S
Software: c3750-ipbasek9 - mz.122 - 52.SE.bin
ACS:
C1121 with version 5.3.0.40
The problem occurs when the ACS sends within the radius Authentication accept packet the following attribute:
Cisco-AV-pair=ACS:CiscoSecure-defined-ACL=#ACSACL#-IP-auth-4eb90704
On the side of the switch, I see the following debug log:
002558: 8 Nov 14:31:35.586: % AUTHMGR-5-START: start "dot1x' for the client (0022.680b.da7b) on the Interface Fa1/0/1 AuditSessionID AC1FFE4E0000003105BCDE19
002559: 14:31:35.703 8 Nov: AAA/ATTR: prefix of an invalid attribute: "ACS."
002560: 8 Nov 14:31:35.703: % DOT1X-5-FAIL: failure of authentication for the client (0022.680b.da7b) on the Interface Fa1/0/1 AuditSessionID AC1FFE4E0000003105BCDE19
002561: 8 Nov 14:31:35.703: % AUTHMGR-7-RESULT: result of the "dead server" authentication of 'dot1x' for the client (0022.680b.da7b) on the Interface Fa1/0/1 AuditSessionID AC1FFE4E0000003105BCDE19
802.1 x switch associated config:
GLOBAL:
Group AAA dot1x default authentication RADIUS
Group AAA authorization network default RADIUS
start-stop radius group AAA accounting dot1x default
RADIUS-server host 172.31.254.140 auth-port 1645 acct-port 1646
RADIUS-server host 172.31.254.141 auth-port 1645 acct-port 1646
RADIUS server key 7 123415ASFASFAS55512
RADIUS vsa server send accounting
RADIUS vsa server send authentication
analysis of IP device
IP access-list extended by DEFAULT, ALL
allow an ip
SPECIFIC PORT
interface FastEthernet1/0/1
Description model Port 802. 1 x
switchport access vlan 244
switchport mode access
IP access-group by DEFAULT, while
authentication event fail following action method
open authentication
authentication priority dot1x mab
Auto control of the port of authentication
periodic authentication
MAB
dot1x EAP authenticator
dot1x tx-time 10
end
Next to the ACS authentication ends successfully, but for some reason, the switch cannot understand attribute was sent by the ACS:
Why Authentication translates as 'server-dead?
Hereby, I have attached the authorization profile, the downloadable ACLs and the detail of the RADIUS authentication for the request...
Any idea?
Thank you very much!
Yes, I came across the same issue and ended up as a bug with the 3750
CSCtj28883 dACL attribute the parsing failed when debug "author of aaa" on
Description is
The DACL processing fails when the following debug settings are turned on.
1 debug aaa attr
2 debug aaa authorization
The same works very well when they are turned down. Set the switch of newspaper.
I believe has been resolved in version 3750-Build 12.2 (55) as to the next note, attached to the bug as proved to be irreparable on later constructions
The issuer has confirmed that the bug is not seen on the image of 55SE.
The issue is only seen in 53SE
can also try and switch debug off
-
ORA-00902: invalid data type on xmltable
Hello
I learn XMLTABLE but not able to run the following queries,
with xml11g as ( select '<?xml version="1.0"?> <purchaseorder orderdate="1999-10-20"> <shipto country="us"> <name>alice smith</name> <street>123 maple street</street> <city>mill valley</city> <state>ca</state> <zip>90952</zip> </shipto> <billto country="us"> <name>robert smith</name> <street>8 oak avenue</street> <city>old town</city> <state>pa</state> <zip>95819</zip> </billto> <comment>hurry, my lawn is going wild!</comment> <items> <item partnum="872-aa"> <productname>lawnmower</productname> <quantity>1</quantity> <usprice>148.95</usprice> <comment>confirm this is electric</comment> </item> <item partnum="926-aa"> <productname>baby monitor</productname> <quantity>1</quantity> <usprice>39.98</usprice> <shipdate>1999-05-21</shipdate> </item> </items> </purchaseorder>' myxml from dual ) select s.*, b.* from xml11g t, xmltable ('/purchaseorder' passing xmlparse(document t.myxml) columns "shipto" xml, "billto" xml ) x, xmltable ('/shipto' passing x."shipto" columns "name" char(20), "street" char(40), "city" char(40), "state" char(2), "zip" number(10) ) s, xmltable ('/billto' passing x."billto" columns "name" char(20), "street" char(40), "city" char(40), "state" char(2), "zip" number(10) ) b;
It is showing me special suite
< zip > 90952 < / zip >
*
ERROR on line 10:
ORA-00902: invalid data type
Please guide me what I'm missing here.
Thanks and greetings
Alexander gelin
For me the (slightly modified) works:
[sql]
with xml11g as ( Select ' Alice Smith 123 maple Street Mill Valley CA 90952 Robert Smith 8 Oak avenue old town PA 95819 Hurry, my lawn is going wild lawn mower 1 148.95 confirm this is electric baby monitor 1 39.98 1999-05-21 "double myxml. ) Select *. of xml11g t. XMLTable ('/ purchaseorder' by the way) xmlParse (document t.myxml) columns "shipto" XMLtype, "billto" XMLtype ) x, XMLTable ("' / shipto' passing x." ShipTo") columns 'name' char (20) , 40 "Street." 'city' 40, 'State' (2) tank. "zip" INTEGER + 1 , XMLTable ("' / billto' passing x." BillTo") columns 'name' char (20), 40 "Street." 'city' 40, 'State' (2) tank. "zip" INTEGER ) b ;
[SQL]
-
From a function table: invalid data type error
Hello
I'm a ORA-00902: invalid data type error when I try to call the function from a select statement below. Here, I am leaving an array from a function.
create or replace package pkg10 as type tabletype1 is table of table1%rowtype index by binary_integer; function func1 return tabletype1; end pkg10;
create or replace package body pkg10 as function func1 return tabletype1 is v_tab1 tabletype1; idx integer; begin idx := 1; for i in (select * from table1) loop v_tab1(idx).name1 := i.name1; v_tab1(idx).key := i.key; idx := idx+1; end loop; return v_tab1; end func1; end pkg10;
Please point out to me where I'm wrong.select * from table(pkg10.func1);
Thank youSathya Vamsi says:
HelloI'm a ORA-00902: invalid data type error when I try to call the function from a select statement below. Here, I am leaving an array from a function.
create or replace package pkg10 as type tabletype1 is table of table1%rowtype index by binary_integer; function func1 return tabletype1; end pkg10;
create or replace package body pkg10 as function func1 return tabletype1 is v_tab1 tabletype1; idx integer; begin idx := 1; for i in (select * from table1) loop v_tab1(idx).name1 := i.name1; v_tab1(idx).key := i.key; idx := idx+1; end loop; return v_tab1; end func1; end pkg10;
select * from table(pkg10.func1);
Please point out to me where I'm wrong.
Thank you
you try to use a data type of PL/SQL as part of an SQL statement. is NOT authorized.
-
TypeError: Invalid Argument type
I'm not a programmer. I get... but I'm having a problem with a script that I am running. The script runs and does exactly what I want except the following error appears in the javascript debugger window:
TypeError: Invalid Argument type.
Doc.getPageNthWord:32:Field CONN Button Maker: mouse up
= > NPage parameter.
Here is the code that I currently have... could someone tell me why I get the error I am?... and how fix it?
prompt the user to enter the last number of the necessary key
var volNumQ = app.response ({cQuestion: ' how much are & for? ', CTitre: "mv Button Generator", cDefault: '1'});
prompt the user to enter the last number of the necessary key
var machineViewNum = app.response ({cQuestion: ' what a view machine are you on ', CTitre: "mv Button Generator", cDefault: '1'});
vnq var = parseInt (volNumQ);
mount the user entry as an int to the table... Add 1 to offset from zero array
mvn var = parseInt (machineViewNum);
var mvData = [];
var page = pageNum;
var mvNumWords = this.getPageNumWords ();
for (mv var = 0; mv < mvNumWords; mv ++)
{
[mv] this.getPageNthWord = mvData (page, mv);
}
Table to find all the items on the page
for (var PN = 0; PN < this.numPages; np ++)
{
for (var x = 0; x < calloutArray.length; x ++) {}
for (var y = 0; y < mvData.length; y ++) {}
mvData [y] = this.getPageNthWord (page, y);
{If (calloutArray [x] == {mvData [y]})}
Console.println("!) FOOTBALL GAME! -calloutArray ["+ x +" ""] "+ calloutArray [x] +" mvData ["+ y +" '] "+ mvData [y]);" ""
var q = this.getPageNthWordQuads (page, y);
m = (new Matrix2D) .fromRotated (this, page);
mInv = m.invert)
r = mInv.transform (q)
r = r.ToString)
r = r.split(",");
var l = this.addField (('0000'_+_calloutArray[x]).substr-(4)-"cv" + vnq + "v" + ('00'-mvn).substr(-2), "button", page, [r [4], r [5], r [2], r [3]]);
l.setAction ("MouseUp", "this.gotoNamedDest (" "+ gridArray [x] +"'");");
l.userName = 'schematic location. "
skipCoords += 1;
}
}
}
page ++;
MVN ++;
}
Any help would be greatly appreciated!
Windows 7 64 bit, Acrobat 8.0 Pro
The getPageNumWords method is a no optional parameter, the page number...
-
"Invalid column type" then Re-login
Hello guys,.
We used following 'close the session code' in our application as suggested (from google).
FacesContext ctx = FacesContext.getCurrentInstance ();
ExternalContext ectx = ctx.getExternalContext ();
HttpServletResponse response = (HttpServletResponse) ectx.getResponse ();
Query HttpServletRequest = (HttpServletRequest) ectx.getRequest ();
Session HttpSession = (HttpSession) ectx.getSession (false);
session. Invalidate();
+ try {+
response.sendRedirect (loginPageURL);
ctx.responseComplete ();
+} catch (IOException e) {+
e.printStackTrace ();
+}+
But we encounter an error "invalid column type" when the user logs off and attempt to log in again.
same mistakes also stationed in these discussions:
Disconnection of code creates problems when the re-login.
Invalid column type: Bind Variable problem (after the expiration of session)
My question is "how to solve this problem?Hello
I read a link you provided.
Information;
I got the same problem with Logoff / Login , it is because ADF want to re-use the pool connection and wants to reset the datasource.
I think that you should to reset the module of your application.
In my code, I use createRooApplicationModule method when I connect to the application. It will create the new Module of Application and reset.
Please try it out.
ARO
EBA -
Manager extension attribute 'type '.
Hey everybody,
I write my first extension CF Builder, which is just a word processor that will happen in the selected text editor. Easy enough so far.
I just wanted to check what the docs say the attribute 'type' tag of the Manager in the ide_config.xml file:
Type:
Specifies the type of Manager.
You can specify the type of handler is "CFM".Which means that my menu extension element is not displayed when right-clicking in the file editor, but the CFM files. So if I want to treat the text of a HTML or PHP file, I'm practically no chance. This seems so myopic and ridiculous. I hope I'm wrong.
Thank you
Andy
Shooting - I'm sorry. I thought that you were a right click on the files as in
the Navigator view, where he worked. As for the editor, you're
right, I don't think that you can do in a file non - CFM, unless you right
Click / Open the file in the browser and select open with and choose the
Builder Editor. Who give a shot?
-
I get an error-invalid data type
DECLARE
CURSOR med_rec_cur
IS
SELECT *.
OF temp_records_med;
p_success NUMBER;
strQuery VARCHAR2 (10000);
v_count NUMBER;
v_filename temp_records_med.filename%TYPE;
TYPE med_rec_tab IS TABLE OF temp_records_med % ROWTYPE;
ErrNum NUMBER;
Slno_tab TYPE IS a TABLE OF VARCHAR2 (100);
v_med_rec_tab med_rec_tab;
dml_errors EXCEPTION;
v_slno NUMBER;
v_all_slno VARCHAR2 (1000);
v_slno_tab slno_tab;
tba_slno temp_records_med.slno%type;
BEGIN
OPEN med_rec_cur.
LOOP
BEGIN
EXTRACTION med_rec_cur
LOOSE COLLECTION v_med_rec_tab LIMIT 1000;
FORALL I IN 1... v_med_rec_tab. COUNT SAVE EXCEPTIONS
INSERT INTO meddetail
VALUES v_med_rec_tab (i)
RETURN slno BULK COLLECT INTO v_slno_tab;
EXCEPTION
WHEN dml_errors
THEN
v_all_slno: = ', '. To_char (v_all_slno);
END;
EXIT WHEN med_rec_cur % NOTFOUND;
END LOOP;
CLOSE Med_rec_cur;
INSERT INTO BOSSDRAGON - INVALID DATA TYPE
SELECT * FROM TEMP_RECORDS_MED WHERE SLNO NOT IN (SELECT tba_slno FROM)
(TABLE (CAST (v_slno_tab AS slno_tab) tba_slno))) ;
END;
Published by: user8731258 on Sep 6, 2010 23:14Casting will not change the fact that you have a local collection type in a SQL statement, which is not allowed. You can create a stand-alone type with CREATE TYPE? Or use something like SYS. DBMS_DEBUG_VC2COLL that is already defined.
You don't need a CAST explicitly in the TABLE expressions after around Oracle 8i.
-
table (cast - invalid data type problem
Hi all
Baseline scenario:
--------------------------
PACKAGE
--------------------------
create or replace
PACKAGE C2_PAYMENT_DOC IS
Bin_array TYPE TABLE IS NUMBER
INDEX OF DIRECTORY;
FUNCTION test_fun (l_doc_id IN integer) RETURN bin_array;
--------------------------
PACKAGE_BODY
--------------------------
create or replace
package C2_PAYMENT_DOC as body
Bin_array test_fun (l_doc_id-IN integer) FUNCTION RETURNS IS
l_gross bin_array;
Start
c2_purchase_invoice.get_inv_gross_amount (l_doc_id, l_gross (1));
Return l_gross;
end;
END;
--------------------------
QUERY
--------------------------
Select * from Table (Cast (c2_payment_doc.test_fun (1) as bin_array));
The query result is ORA-00902: invalid data type
How can I make the valid select statement?
Thanks in advance,
BartekYou cannot use local collection types in SQL. You must create a bin_array of type like nested SQL table type. In addition, depending on the version you will not cast:
SQL> CREATE OR REPLACE 2 TYPE bin_array 3 AS TABLE OF NUMBER 4 / Type created. SQL> create or replace 2 PACKAGE C2_PAYMENT_DOC IS 3 FUNCTION test_fun(l_doc_id IN integer) RETURN bin_array; 4 end; 5 / Package created. SQL> create or replace 2 package body C2_PAYMENT_DOC as 3 4 FUNCTION test_fun (l_doc_id IN integer) RETURN bin_array IS 5 l_gross bin_array := bin_array(); 6 begin 7 l_gross.extend; 8 l_gross(1) := l_doc_id; 9 return l_gross; 10 end; 11 END; 12 / Package body created. SQL> select * from Table(Cast(c2_payment_doc.test_fun(1) As bin_array)); COLUMN_VALUE ------------ 1 SQL> select * from Table(c2_payment_doc.test_fun(1)) 2 / COLUMN_VALUE ------------ 1 SQL>
SY.
Maybe you are looking for
-
Updated 10.11.3 don't process not
The update to 10.11.2 10.11.3 do not operate briefly after a few first bytes (about 64 MB) downloaded and freezes then after this point. The messages in the system control, I get are (the same after testing repeated): App Store [417]: Class unknown F
-
Need help, get message display driver has stopped working, but has recovered
Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help
-
I recently installed Outlook 2007 (passage from GroupWise) and now when I load Outlook, I get the following message pop up displays. "Extension WinFax message - there are problems to access MS Exchange/Outlook Forms Manager. Please check your Exchang
-
Windows Movie Maker DVD will not play in my DVD of Emerson drive
Burned DVD won't play in my dvd player. I worked on it for three days. I burned a movie on a dvd + rw disc. The film will play on my computer but won't play in my dvd player. I get "Disk error" on the screen and the disc may not have playback functio
-
error 1603 - msiexec.exe shown as a Trojan horse
AVG reported this as a Trojan.attempting to download the mouse disk Intellipoint 7.0 that arises as dangerousshown in c/windows/system32/msiexec.exe - download aborted. AVG can not put to the virus vault (something) perspective!on the Toshiba Satelli