Several problems with Photoshop

Similar Questions

• Several problems with photoshop after upgrading to win10

  I've updated to win 10 a week ago and today I experienced several problems with photoshop. The first question is about the quick selection tool. I select and try to choose an area on the picture I want to work on. It performs either one of two things. F1. It won't select anything finally photoshop will crash. 2 when he decided to select something it goes super slow and will switch to the symbol of thought every few seconds.

  second question...

  Because I can't get select quick took the job I'll move the pen tool. I started to select anchor points and ill get maybe 20 points the image then becomes completely black. If I scroll top down I can clearly see the parts of the image, but when I stop scrolling returned to a black square. Later photoshop then crash.  TSF is to face all of a sudden?

  Make sure that your GPU drivers are perfectly up-to-date (directly from the manufacturer) and they are 10 Windows compatible. You can also try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Benjamin

• Several problems with Photoshop CS5

  I had CS5 since May this year and suffered some random crashes since installing it. I persevered, assuming that it was my fault or the fault of my system, but it's starting to drive me crazy. Sometimes it works perfectly, sometimes it works for a while and then crashes, either by simply failing to respond, either by closing all of a sudden (when I get the message "the program has encountered a problem and needs to close"). Sometimes it does not start and will not open all the files, usually with an 'out of memory' error (i.e. one will also sometimes appear when the program was working well for some time). I also sometimes get a message 'Photoshop has encountered a problem with the display drivers' when the program opens. (My Nik plugins also do not work half the time, while Nik claims that they are compatible with CS5 and I have the latest version, but I admit that it is maybe a problem with the plugins and not with Photoshop.)

  I am at a loss.

  I am running Vista 32 bit on a Dell XPS 420 (Intel Core 2 Quad 2.4 GHz) 4 GB of Ram. The problems do not seem to be affected by the amount of memory I pay to Photoshop.

  The graphics card is an ATI Radeon 3800 with 512 MB Ram - the drivers are up to date (latest version Oct. 2010). It does not seem to make a difference to the problems if OpenGL is enabled or not.

  However, sometimes the failed module is Photoshop.exe, and sometimes it is listed as 'unknown '.

  In the reports that I've seen, this means usually only a plugin unloaded, while he got a reminder. But we are pretty sure that it is through third-party plugins.

  There are still problems with some third party plugins, and they must also be updated to pick up bug fixes.

• Digital art, files of large multi layers and increasing problems with Photoshop - advice please!

  Hi all

  I am a digital artist, who does about 90% of his work in Photoshop. However the gel, crash at launch and at the exit of RAM reviews (even on opening 1 small file) have become more frequent until this week I can't work at all.

  Records of work because they are implemented today:

  (1) 1928.11 GB (external)

  (2) GB 2560.76 (external)

  (3) F 286.17

  (4) 40.49 GB (boot)

  Although a lot of arrangement of these discs have all failed.

  It is not uncommon for me to work on the art that has 40 + layers in a document of 300 dpi (the 750MO PSD file size) 18 x 18 inches. (Even this does not end where JPG size for some of the clothing I hope to do my job). Again, for a year or two I did not seem to have any real problem with the files of this size. Originally, I was with WIN 8.1/Photoshop CS6. But the crash. Gel and off RAM review has progressed to the point that I had to stop and restart everything several times per hour often lose work - always lose time and focus.

  I have a specific computer for design only, so I have other things running while I'm working. My stuff of protection antivirus is up-to-date.

  3 weeks ago, I upgraded to Windows 10 and went ahead (despite having the full Creative Suite CS6 on expensive Disk) and a subscription that I can not afford for Photoshop CC. I want to get some relief from frequent problems. I don't have. The problems have got only worse/more frequent. I can only do one or two little thing in any given job. So, I have to stop or lose my job. This morning, I can not open a 47 MB file and a picture of 24 MB to bring it.

  As a bonus, since the "revaluation" of CC Adobe married now often hold for 10 to 30 seconds when scrolling. This has never been a problem in the past.

  I purge. I rearrange "scratch disks". I keep a historic minimum (4) States... All the things recommended in all of these items online on this seemingly common problem with Photoshop. I want it to work. I am not a technophile and feel like I have to return to college for a degree computer SCIENCE or art my work/income - in total. I am also very aware, it can just some obvious problem my artsy, non-tech brain does not see, so hopefully someone here can help you.

  Example: showing why so many layers are needed. Often much needed individual 'twisted' once again towards the end of the design work, so cant more be combined while I add them in.

  In clear simple any help would be greatly appreciated - single to the top of the preferences for the way I work in...

  Thanks, Nola Lee Kelsey

  Windows 10 - 32 bits, and that is the problem.

  A 32-bit operating system can use 3.76 GB of ram no matter how much you have, simple math - 2 ^ 32 = 4,294,967,296 bytes 4294967296 / (1 024 x 1 024) = 4 096 MB = 4 GB

  Solution to your problem - reinstall 10 64-bit Windows.

  ~ Rohit

• Several problems with Adobe Creative cloud app.

  I have several problems with the Adobe Creative Cloud application.

  1 CC Photoshop or prelude CC cross the bar of the 47% during installation. They constantly give me messages "Installation failed". When I click on "Learn more", I like that:

  "Installation failed."

  Errors during Installation. (7)

  More information"

  So, naturally, I click on more information to get the lifting against me following (which no do I understand):

  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR:   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 2 error(s)    ERROR: 12/01/13 13:16:06:425 | [INFO] |  | OOBE | DE |  |  |  | 6076 | ---------- CustomHook_Helperx64 ---- Start ----------  12/01/13 13:16:06:426 | [ERROR] |  | OOBE | DE |  |  |  | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0    ERROR: System check returned with error : -4  ------------------------------------------------------------------------------------- 

  2. I installed 5 Lightroom, then uninstalled. When I went back to re - install, the application Adobe Creative cloud wouldn't let me. He says that my 5 Lightroom is "up-to-date" and that it is in my article 'Your applications', not in the section 'find new applications '. I rechecked my programs and features in Control Panel, and it isn't here. I cleaned my registry and it is still there. I deleted the file "opm.db" in my OOBE folder and restarted CC - still nothing.

  I must say, guys. I'm not very happy with the time I spent just trying to install programs on my PC. While the plan is for it to be intuitive at a certain time, it is not very functional at the moment. No matter how much help you can provide me would be amazing - if you can provide it sooner than later, I'd be on the moon.

  Thank you.

  Hope this will help others record the amount of time this error I spent troubleshooting.  When you install Adobe InCopy CC, CC of Adobe InDesign, Adobe Photoshop CC, CC prelude Adobe and Adobe first Pro CC on a laptop Windows Pro 8.1, I an error similar to the one below.  Other installations of Adobe Acrobat XI Pro, Adobe affect effects CC, Adobe Audition CC, Adobe Bridge CC, CC of Adobe Illustrator, Adobe Lightroom 5 and Adobe SpeedGrade CC installed without error.  I ran across this test with a clean operating system, new construction to help isolate the problem.

  23/12/13 16:33:04:372 | [INFO] |  | OOBE. OF |  |  |  | 912 | 23/12/13 16:33:03:368 | [ERROR] |  | OOBE. OF |  |  |  | 6316 | Cannot load the name "CSInstallerCustomHookProc" C:\Program Files (x 86) library function \Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0

  I ran a minimum load of the operating system by stopping all non Microsoft services by running MSCONFIG. EXE and disabling and disabling all startup in the Task Manager, Startup tab items.  After restarting the laptop, I was then able to install CC of Adobe Photoshop and Adobe first Pro CC.  However, Adobe InCopy CC, CC of Adobe InDesign and Adobe prelude always failed CC.  I needed to start safe mode and disable BitDefender Virus Shield and BitDefender Desktop Update Service and then restart mode Normal (services were always disabled). I continued and completed the installations of Adobe InCopy CC, CC of Adobe InDesign and Adobe prelude CC.

  It seems that BitDefender is the process to load this function as a virus Trojan markup and stop installation.

• Several problems with Windows 8 - Upgrade-unable to download full

  Original title: several problems with Windows 8

  Last Sunday, after downloading Ab2word, my tiles shortcuts stop working. I have uninstalled the program, but nothing improved. I made an update of Dell and got the shortcuts work again (curiously I could always connect via the desktop). now, I get a message saying that Windows is disabled and to enable him, by putting in... but he says that it is impossible to activate. Then I tried the upgrade to 8.1 by the store and got a message saying that I was unable to complete the download. Now my shortcuts tiled work, but they open the sites registered by the office, not as a full screen. I tried to restore to the factory and now get the message that the system is unable to restore. I ran a dell diagnostic and it showed nothing. I did a full security scan and he came clean. I'm rapidly reaching crisis. When you try to seek help on the Web site, Windows 8 is not listed... It is 7 to 8. 1. any suggestions? This computer is less than 2 years old and I'm ready to take a hammer to it.

  Hello David,.

  Please write to us and offering the opportunity to help Microsoft Community.

  What exactly do you mean when you say "Windows is disabled and enable it via the setting..."?

  You receive the "Cannot download" error during upgrade to Windows 8.1, I'll follow the steps by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

• problem with photoshop 2015.5, everytime I open photoshop all my preferences are reset to zero. very annoying, please help?

  problem with photoshop 2015.5, everytime I open photoshop all my preferences are reset to zero. very annoying, please help? I tried my default preferences of rest, it did not work! need for this problem!
  

  I gave a sort of special authorizations, the reading and writing have been already checked, but it seems to work now, thx

  "Follow these steps:

  • Quit Photoshop
  • Navigate to the location of the settings Adobe Photoshop CC2015.5 folder manually.

  Location specified in this article depending on your OS: preference file works, names, places | Photoshop CC 2014

  • Make sure that the Configuration of the CC2015.5 folder has full read and write
  • Restart Photoshop and then check. »

• Big problem with photoshop!

  Big problem with photoshop! 6 days ago, I expired trial version of photoshop for a month, four days ago, I purchased a monthly subscription only for photoshop, after trying the steps written on the adobe page, yet I can't use photoshop because it says "trial has expired" when I try to click on buy says 'already purchased package' but the problem is that even after having uninstalled and reinstalled all adobe problem reports. talk about the Mac in Photoshop version. Being the center of Italian service does not even exist in my language... Sorry for my bad English, I hope someone can help me!

  According to the information of your account you have not activated your Computer.Looks as something must be considerate activation.

  See Solutions to connect, activation and errors in connection with creative cloud and Creative Suite applications and follow the steps. /

  ~ Assani

• Several problems with ODT 12.1.0.1.2

  I've noticed several problems with ODT 12.1.0.1.2
  

  
  1 opening problem on the XE database packages (10.2).
  Problem occurs in Visual Studio 2010 and 2012.

  In Server Explorer, I created the data using ODP.NET connection, unmanaged pilot. in the 10.2 XE database

  When the connection is open tree of object type is displayed.

  Try opening the packages tree does not work ORA-00904: #SELTAB ".". OBJECT_TYPE': invalid identifier

  Same problem occurs using unmanaged driver.

  This does not happen to the standard database connection.

  2. the problem of schema comparison
  It does not work if XE (10.2) database is involved as a source or target.

  It fails with ORA-00904: "AP". "' OBJECT_TYPE ': invalid identifier

  3 connection editor

  There is an annoying problem with the connection editor.

  When I try to change the connection and the connection type is TNS then Data source name combobox selects the first entry of TNS (in alphabetical order) and not one that was used when the connection is created or changed.

  akabook wrote:

  I've noticed several problems with ODT 12.1.0.1.2
  

  
  1 opening problem on the XE database packages (10.2).
  Problem occurs in Visual Studio 2010 and 2012.

  In Server Explorer, I created the data using ODP.NET connection, unmanaged pilot. in the 10.2 XE database

  When the connection is open tree of object type is displayed.

  Try opening fails tree packages with ORA-00904: #SELTAB ".". OBJECT_TYPE': invalid identifier

  Same problem occurs using unmanaged driver.

  This does not happen to the standard database connection.

  2. the problem of schema comparison
  It does not work if XE (10.2) database is involved as a source or target.

  It fails with ORA-00904: "AP". "' OBJECT_TYPE ': invalid identifier

  3 connection editor

  There is an annoying problem with the connection editor.

  When I try to change the connection and the connection type is TNS then Data source name combobox selects the first entry of TNS (in alphabetical order) and not one that was used when the connection is created or changed.

  Thanks for the comments.

  (1) ODT requires database 10.2.0.3 or later since the view ALL_PROCEDURES added the OBJECT_TYPE column after this version. Now, everyone with the exception of 10.2 XE has updated past this point (XE cannot be corrected). So that means 10.2 XE cannot be used with ODT, if you want to view the proceedings. There is a 11.2 XE you can use:

  http://www.Oracle.com/technetwork/database/database-technologies/Express-Edition/downloads/index.html

  (2) same question

  (3) thanks for this note. I will alert you of the development team.

• I have a problem with photoshop cc in windows 10

  Hello

  I have problems with photoshop cc in windows 10. I am not sure if the problems are related to what windows 19, but certainly, the problems got worse since. (My computer runs on windows 10. At an i7 processor, NVIDIA® GeForce® GTX 965 M, the DDR3L 16 gig memory, the GDDR5 2 GB graphics card, a card of 256 GB ssd and 1 TB of hard drive). I don't think it's a problem with my computer.

  I am currently working on a project where I need to cut some parts of the photo, that I will use it later. But I'm having the problem now, some photos displayed as it should. And some are not. They seem to be grey. Or there is some kind of white/gray block above them. It is as if is not available to the loading screen (?). If the object is there, but just does not appear right. I just put a few screenshots here that show the problem. I hope someone can help me with this. Because I can't finish my project with a photoshop which does not work at height.

  

  

  
  

  
  

  I really hope that anyone kno w s, what the problem is and can help!

  Hi Editjo,

  Greetings!

  This seems to be a graphics card problem.

  Please disable the graphics processor in photoshop, and then try again.

  Open Photoshop

  Click on edit-> preferences-> Performance

  Uncheck use graphics processor

  Click OK

  Close Photoshop and re - open and then use the way you did that.

  Also, please share the exact version of your Photoshop.

  Concerning

  Jitendra

• Hi, I have a problem with photoshop.

  Hi, I have a problem with photoshop. I say I have no subscription on my account, but they are already two months without payment using photoshop after. Now I finished the trial. I want to unsubscribe. Thank you

  In case you want to cancel the subscription, please contact customer service

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership

• No problem with Photoshop 6 in Mac OS 10.6?

  I put my computer to OS 10.4 to 10.6 OS level. It's true that sometimes if you try to open a PSD document in OS 10.6 will open it in preview and not Photoshop? Someone had it all

  other problems with Photoshop 6 in OS 10.6?

  Do you mean Photoshop CS6?

  Elissa Schwartz wrote:

  It's true that sometimes if you try to open a PSD document in OS 10.6 will open it in preview and not Photoshop?

  Laughing out loud

  Would occur only if you put your file Healt to open PSD files in preview.

  2 ways to change the default Application for opening files with Mac OS x

• Problems with Photoshop CS5

  Hi all

  I'm having a problem with Photoshop CS5, as you can see from the pictures the work area does not show anything.

  Does anyone have an idea of what could be the problem and what can I do to resolve this issue.

  Any help will be appreciated.

  Regards Andy.

  

  Try updating the video card drivers and if that doesn't work then try turning off the drawing OpenGL from edit-> preferences-> Performance

• Small problem with Photoshop CS3

  Hi, I have a little problem with Photoshop CS3, I don't know if it's because only option of Windows that I messed up, but the thing is that I got in all the options, or some sort of preferences.

  

  I don't speak of the 'little window' (I don't know the exact name) come, in this case, the filter and analysis options, they just turn right and usually, down it on their left side. It's really annoying.

  Not a big deal, but I can not really work properly. I hope you guys can help me, and this is my first post, I hope I don't break any rules.

  You have activated the left-handed Tablet support in your system settings. Turn the power off and everything will be back to normal.

  Mylenium

• Problem with Photoshop print CC

  Recently, several people have commented on a problem printing with Photoshop CC. The question is: when the Center box is enabled, the image seems to be centered in the print dialog window, but when printing in fact the image is not centered on the media. This seems to be particularly the case when an image is moved and centered on a (larger than the image) background which is the exact size of the media. My thought on is to flatten the layers before opening the print dialog box. Other thoughts or others see this phenomenon?

  In my view, the Epson 3880 allows you to print without margins on the sides, but there is a breakthrough area of the top and bottom.  If your image can be resized to insert in the printable area of media.  I have and old Epson printer a 4800.  If I select 8 x 10 media, I get a little popup in the dialogue does Epson Print parameter indicating that without borders is not supported on this paper size. And Photoshop can change my picture 8 x 10 down in size. In print preview, the hash lines appear the unprintable area.