Several remote servers

Similar Questions

• You can specify several remote servers (live)?

  I have selected a server for testing, but we have several live servers to balance the load.

  How can I specify a total of 3 remote servers or more?

  Hello

  You can add several remote server from the site configuration window. This dialog accessible via the file menu > manage sites. This will launch manage sites dialog box. Choose your site and in the server category, add as many remote servers you want. But you can only choose a single server at a time.

  Thank you

  Confidante

• WLC centralized with several remote Sites

  Hi people,

  I read the documentation of design for wireless devices, and I can't find a definitive answer to the following:

  Is it possible to have a WLC centrally (in a DMZ), who controls several remote sites?  Each site must have the same SSID, however the IP subnet will be different at each site.

  I have attached a base PDF showing what we are trying to achieve.

  Thanks for your help.

  Kris

  Of course, you could put either the AP mode H-REAP so that the data of the customer traffic is enabled locally to the AP or you can use groups of AP.  With groups AP customer traffic be dug to the controller and group AP policy would determine which interface / VLAN, traffic should be poured in.

• several remote agent

  Hi all

  I installed version 4 of the ACS. We have several devices in the group all of them use the same ad for authentication. We have created several NDG, now I need to create remote agent with the same IP for each NDG but ACS helped to create several remote agent with the same IP address. How can I create several NDG, but all use the same remote agent?

  Thank you

  Alex

  Hello

  I don't know if I understand your question. In any case, I am setting my understanding below:

  AAA clients are defined in the NDG on the GBA unit.

  ACS appliance authenticates via AD.

  ACS appliance must RA to talk to AD.

  Now in your question, here's my understanding:

  The AAA Clients are defined in NDG. they must authenticate via the AD. so, to talk to the AD, we define RA by NDG.

  Is it true that your question?

  If so, then the flow is a bit like this:

  AAA Client sends the authentication request.

  The request is received by the GBA unit. For the device, it's just a query no matter whence it. He sees that this must be authenticated through the AD. Inorder to do that he must send to the Remote Agent. then it will send Remote Agent who will forward in turn to the announcement.

  Thus, defination RA by NDG does not come into picture.

  For reference the link describing the NDG aims as follows:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/NetCfg.html#wp342699

  The link to the Remote Agent is as follows:

  http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/3.3/installation/guide/remote_agent/rawo.html.

  I hope that I have answered the question.

  Kind regards

  Anisha

  PS: Please note that this link solved if you feel that responds to the request.

• Synchronize with two remote servers

  Is it possible to use the file manager of Dreamweaver to synchronize a local site with TWO remote servers? I want to be able to synchronize everything on my test server for the client to approve and then synchronize with the server. Only way I can do it is by changing the server in the management of sites window, thought it might be a way to do this in the File Manager window.

  You can switch between the test server and the remote server in the window files expanded with the keys on top. Click the (square icon 2) expand button at the far right of the files tab, and then select the test or the remote server it...

  

• R12.1.3 updated 11.5.10 and have several application servers

  Hello
  
  We are trying to upgrade the Instance to R12.1.3 11.5.10.
  12.1.3 Instance will have several application servers.
  
  I'll make a R12.1.1 Installation with Option to upgrade.
  
  What should be the procedure to several application servers?
  
  Finish the upgrade on a node of the Application, and then clone the other levels of applications?
  Please notify.
  
  Kind regards
  VN

  The current Architecture is two nodes with the Application on a node and the CM layer and DB level on another node.
  R12 Application tier is going to be on both nodes and the DB on cars.

  Please let know us on how to achieve.
  Upgrade with the node of an application and then clone or make a multi tier application node upgrade.

  Both approaches will work. However, using the cloning approach would take less time to compare several node approach.

  Thank you
  Hussein

• How to create remote servers-managed servers.

  Hi all
  
  I'm new to weblogic and anyone can you please suggest me some articles that described on
  creating remote servers-managed servers.
  
  
  Thanks in advance.
  
  
  
  Kind regards
  Veillon.

  Hi Venturini,

  You can follow the steps detailed here

  http://WebLogic-wonders.com/WebLogic/2010/11/12/WebLogic-setup-in-distributed-environment-with-node-Manager/

  If you are having problems, let us know.

  See you soon!
  Faisal

• Applying the SSO for several Weblogic servers on the same Windows domain

  I have several Weblogic servers (developer machines, test servers, testing of clusters, clusters and etc.) on my windows domain name.
  
  I'm going to set up SSO for each of them. However, I would like to ask a question about service principal names.
  
  
  For stand-alone machines (which are not grouped, developer and test machine parts):
  
  
  Do I have to create a new user in Active Directory as "wlskerberos" for each machine on my domain?
  
  
  
  For the machines in the cluster
  
  Do I have to create more than one user account Active Directory for each Member of the cluster as "wlskerberos"?
  
  For clusters, les utilisateurs users don't see HTTP address of the managed servers that are behind the Oracle HTTP Server.
  
  So I'll add as an SPN and map it to the Oracle HTTP Server address?
  
  
  Finally for the keytab files, need enogh to create a single file keytab for all machines?

  Do I have to create a new user in Active Directory as "wlskerberos" for each machine on my domain?

  Yes, and you enter the spn with this user

  For the other question, please see this link

  http://WebLogic-wonders.com/WebLogic/2010/03/05/Kerberos-in-a-proxyload-balancer-WebLogic-cluster/

  I hope that answers!

• can I use mulitple Essbase servers if I have several web servers planning?

  Hello
  can I use mulitple Essbase servers if I have several web servers planning?
  Can I have a planning application of finance running on a Web server on a single server Essbase.
  Have another application of planning operations running on another Web server on another box of Essbase and server?
  Thanks in advance.

  Hello

  You can have a lot of servers that you want essbase, provided that they are registered on the same shared services. When you create a data source for the planning your application, you must provide Essbase server name and login. You can provide an essbase server to a source of data and another for another essbase server.

  Also, since planning is based on the RDBMS database, you can have multiple servers web planning pointing to the same planning application. You can use the concept of load balancer as well.

  Let me know if it helps.

  See you soon
  RS

• VPN site-to-Site: several remote networks

  Examples of VPN Site to Site ASA configuration that I have met has only a single network at both sites.

  If the network/remote site multi-network for example DMZ1, DMZ2, etc. from the INSIDE how can it be added via the wizard of Site to Site VPN ASDM.

  Thank you.

  Hello

  I have not seen an example of specific configuration with the addition of several networks for tunnel l2l IPSEC via ASDM.

  Generally speaking, you would just follow the same process in the Sub URL, but add all the multiple networks local and remote networks that you want to be protected IPSEC.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00805a87f7.shtml

  http://www.Cisco.com/en/us/docs/security/ASDM/6_1/user/guide/vpn_wiz.html#wp999348

  Kind regards

  Arul

  * Rate pls if it helps *.

• VPN concentrator - using several authentication servers

  Hello

  I have a question regarding the use of more than one authentication server to authenticate users connecting to a VPN concentrator.

  Is it possible to add several, different (for example: SDI and RADUIS) servers for authentication in the list and make sure that users authenticate to each other to establish the VPN. It seems just a user to authenticate through one of them to establish a VPN. Can you make the user to authenticate through multiple servers?

  Thank you

  Cam

  Cam

  I have no experience with this issue, so I have an opinion but no facts. I suppose that it is possible to separate the authentication of the user of the NAC/posture validation.

  Perhaps someone with experience with this or the necessary expertise for this can help us with some facts.

  HTH

  Rick

• Several remote desktop in Windows 7

  Can you have several users for remote desktop connection in any version of Windows 7?

  Hello psu_1991,

  You cannot use Remote Desktop connection to connect to a computer using Windows 7 Starter, Windows 7 Home Basic Edition or Windows 7 Edition Home Premium.

  Let us know if that answers your question.

  Thank you

  Marilyn

• How can I monitor hyperic several remote sites with hyperic?

  We have implemented a hyperic server in AWS.

  We have a lot of remote sites with a server on site. Each site has its own public static IP address.

  Here is how we have implemented hyperic right now:

  agent.setup.camIP = static public IP of the server in AWS

  agent.setup.camPort = 7080

  agent.setup.camSSLPort = 7443

  agent.setup.camSecure = yes

  agent.setup.camLogin = login

  agent.setup.camPword = pass

  IP #agent.setup.agentIP = public site

  agent.setup.agentPort = 2144

  #agent.setup.resetupTokens = no

  agent.setup.acceptUnverifiedCertificate = yes

  At each site, we have a router that port forwarding on the server. If each server is behind a router and has private static IP such as 192.168.30.101

  We have no problem setting up hyperic on the local server, the problem is that Hyperic HQ is overwhelming the servers. He takes the static private ip address and keep overwriting the latest version of the server.

  Even if we have different server names and the public IP address different when we put in place the agent, once we have put in place the agent and he start shooting the metrics, hyperic just replaces the last installed server monitoring.

  any way to disable the IP address local hyperic traction?

  This could be referred as "PIN to a specific IP address" that is required when a platform has multiple NICs or IP address addresses and is accomplished by adding additional guidance to the agent.properties file. Because you specified a specific port of installation, it is better to pin which as well.

  agent.listenIp =
  agent.listenPort = 2144

  I suggest that you also uncomment:

  #agent.setup.agentIP =

  as well as (properly defined):

  #agent.setup.unidirectional = no

  The setting is described in the header section of the agent.properties file.

  # Agent configuration file
  #
  # The following is the properties of the Agent recognizes:
  #
  # agent.listenPort
  # Default: "2144.
  #
  # Description: Port that listens to the agent.
  #
  # agent.listenIp
  # Default: «*»
  #
  # Description: Address that the agent to listen.  If the value "*",
  # the agent will listen on all available interfaces.

  1.), you now have:

  agent.setup.camIP = static public IP of the server in AWS
  agent.setup.camPort = 7080
  agent.setup.camSSLPort = 7443
  agent.setup.camSecure = yes
  agent.setup.camLogin = login
  agent.setup.camPword = pass
  IP #agent.setup.agentIP = public site
  agent.setup.agentPort = 2144
  #agent.setup.resetupTokens = no
  agent.setup.acceptUnverifiedCertificate = yes

  2.) stop of the agent:

  3.) change this option and add the additional guidance.

  agent.setup.camIP = static public IP of the server in AWS
  agent.setup.camPort = 7080
  agent.setup.camSSLPort = 7443
  agent.setup.camSecure = yes
  agent.setup.camLogin = login
  agent.setup.camPword = pass
  IP agent.setup.agentIP = public site
  agent.setup.agentPort = 2144
  agent.setup.resetupTokens = no
  agent.setup.acceptUnverifiedCertificate = yes
  IP agent.listenIp = public site
  agent.listenPort = 2144

  4.) remove the agent data directory (it is re-created later start)

  5.) restart the agent (this will trigger a reconfigure)

  6.) I accept agent inventory

• Several Hyperic servers?

  Hello

  Is it possible to have several servers Hyperic followed a single instance of vCenter virtual machines? Our safety requirements mean that I can't do communications unidirectional agent of our DMZ to our LAN (where is the current HQ server.) I was thinking the spinning of another HQ server in the DMZ.

  In terms of referencing instances of vSphere, can you have two instances pointing to the same vCenter Hyperic?

  It is possible, it should work fine. Hyperic is agnostic to the computers monitored VC virtual are running on.

• Easy way to pass a test and remote servers?

  This seems to be such a fundamental issue, but the answers that I can find that is to ignore the basic of the local or are the years (and versions) obsolete.

  Simple form: I have a website and want to put the updated files to the test site until they are ready, then put them to the live remote location. Pretty standard workflow. What is better, easier and more 'bio' how to do it?

  Right now, I have two definitions of servers, which are the same, except that a tip to the root of the site host ("remote/live") and one points to a system directory /TEST/ off the coast of the root of the host. The test is controlled permanently 'test '. The remote is verified either 'remotely' or not. If the remote control is checked, put all go to the live site. Unchecked, is go to the test site.

  What is the only way to direct downloads?

  Y at - it's not simpler and more direct toggle the UI to choose test/live? Go to the Server Management menu to switch?

  And what would be the use of control both test and live on the same server - in other words, if I use the only method to choose the destination, would it not wiser to a toggle between the two, instead of a zero or two?

  I feel I'm missing really something here...

  Use the files Panel developed.  See screenshot.

  

  You should see 2 icons of connection.  One is for the outside and the other to the testing server.   That said, I have a local test server (Wamp) installed on my local disk.  If your mileage may vary.

  Nancy O.