Synchronize with two remote servers

Is it possible to use the file manager of Dreamweaver to synchronize a local site with TWO remote servers? I want to be able to synchronize everything on my test server for the client to approve and then synchronize with the server. Only way I can do it is by changing the server in the management of sites window, thought it might be a way to do this in the File Manager window.

You can switch between the test server and the remote server in the window files expanded with the keys on top. Click the (square icon 2) expand button at the far right of the files tab, and then select the test or the remote server it...

Tags: Dreamweaver

Similar Questions

Is it possible to send Radius accounting packets with two different servers?

Hello experts!

I have dilemma I send info Radius accounting on two different servers for authentication of the dot1x. Here are the relevent config. However the switch just to send a copy on the first server in the server group...

RADIUS AAA server Acct group
ACCT-port of the server 172.17.1.1 auth-port 1812 1813
ACCT-port of the server 172.17.1.2 auth-port 1812 1813

accounting dot1x default start-stop broadcast group AAA Acct

RADIUS-server host 172.17.1.1 auth-port 1812 acct-port 1813 key xxxxxx
RADIUS-server host 172.17.1.2 auth-port 1812 acct-port 1813 key xxxxxx

Is it possible to send two copies of two different servers? I tried the key word 'issue' in the aaa accounting command, but it does make a difference. What is doing? I can't find it in the manual...

Thank you!

Difan

Difan,

You must create two aaa server groups to operate. Allows the sending of accounting records to multiple AAA servers. At the same time returns accounting records the first server in each group. If the first server is unavailable, the failover occurs using servers defined within this group.

Accounting AAA broadcast configuration
The following example shows the turn on broadcast accounting using the aaa accounting global command:

RADIUS AAA server group isp
Server 1.0.0.1
Server 1.0.0.2

AAA isp_customer radius server group
Server 3.0.0.1

AAA accounting network default start-stop broadcast group isp group isp_customer

host server RADIUS 1.0.0.1
host server RADIUS 1.0.0.2
Server RADIUS key key1
RADIUS-server host 3.0.0.1 key2 keys

The broadcast keyword causes the start and stop accounting for dot1x connections to be sent simultaneously to the 1.0.0.1 group isp server and Server 3.0.0.1 in the isp_customer group. If 1.0.0.1 is unavailable, Server failover 1.0.0.2 occurs. If the 3.0.0.1 server is unavailable, no failover occurs because backup servers are not configured for the isp_customer group.

Kind regards

~ JG

Note the useful messages

APEX 4 with two HTTP servers?
Hi Im in a new territory for me here
hope someone can point me in the right direction.

I have an internal linux 11i and APEX4 with the server HTTP Server
all the apps work perfectly internally

I have a HTTP server in the demilitarized zone with modplsql set up to link to one of the apps on my internal network
The app is in a Linux box with 11i and apex 4.0.

Internally (on the LAN) of the HTTP server that is located on the same box as 11i and Apex correctly renders every thing.

When I try to access the application via the web images are not rendered.
Drop-down menu lists all jobs but do not have the dynamic actions on them.
also send has none when you press.

Can someone point me in the direction of reading documents on this kind of Setup?

Thanks in advance

Björn
Hello

My proxy section reverses in the httpd.conf file:

------------------------

image # Alias
Alias is/u01/apex/images /.
# Directory for files of APEX


None of the options
AllowOverride None
Order allow, deny
Allow all the

# Cache

ExpiresActive on
ExpiresDefault "access plus 1 month".


# compressed files of type

AddOutputFilterByType DEFLATE text/css
AddOutputFilterByType DEFLATE application/x-javascript
AddOutputFilterByType DEFLATE application/xhtml + xml
AddOutputFilterByType DEFLATE application/xml
AddOutputFilterByType DEFLATE text/x-component



# Proxy reverse setting

(# graphic flasch #HOST #)
ProxyPreserveHost on

ProxyPass /apex http://localhost: 8080/apex
ProxyPassReverse /apex http://localhost: 8080/apex

SetEnv force-proxy-request - 1.0 1
SetEnv proxy-nokeepalive 1
--------------------------------

It works perfectly for me.

Concerning

Several remote servers

I have two remote servers, one for testing and one for production. It seems as if Dreamweaver doesn't let me refer to two servers remote competitor.
While I keep all my files locally, I don't want to test locally that my remote test server is identiacal on my production server.
Anyone know how to designate two remote servers and designate the second server as a test server?
Thank you!

Sites > Manage Sites > Edit.

Use local for your local site.

Use the testing server for your test (remote) Server (FTP).

Remote use of your production server.

Nancy O.

ALT-Web Design & Publishing

Web | Graphics | Print | Media specialists

http://ALT-Web.com/

http://Twitter.com/ALTWEB

Using a remote control or the remote with two Apple TV app?

1 can a remote AppleTV, is the most recent or a last generation we use with two different AppleTV (one is the most recent and is the older generation)?

2. an iPhone Remote APP can be used with two different Apple TV?

Thank you.

1 not easily. There is no way to select the device to control, you end up control both. You could get a programmable remote control and lead to control different devices, but this would require a deception.

2. no doubt. The Remote app offers a grid of all ATVS, he knows, and you choose the one to control. It has the advantage of a keyboard for searches, passwords, etc. Do you need a remote pair with each ATV.

Synchronization of two inputs frequency meter with several analog inputs

Hi all

I'm relatively new to LabVIEW and I'm trying to collect data from multiple sources with calendar sync on the acquisition, but I can't understand. My problem is that I have two inputs frequency meter, an optical tachometer reading one pulse per revolution and a max flow meter machines with a 12000 k coefficient. I can't find a way to synchronize the calendar with my multiple analog inputs. I tried to first get the speedometer to synchronize with the analog inputs following the example linked here. (https://decibel.ni.com/content/docs/DOC-10785) So far every time I run it I get an error on the DAQmx read timeout or an error "several sample clock pulses have been detected" (see image). It seems if I slow the way to down to say 10 hz and make sampling rate ensure that the tachometer signal is more than 800-1000 rpm (13-17 Hz) before starting the VI then the program will run without error until the ROTATION speed is below this threshold, then the "sample Multiple clock pulses" error occurs. The code is attached below.

Does anyone know of a better way to synchronize the entries of frequency of the counter with analog inputs? I would like to have a VI that can display 0 RPM (and possibly 0 flow as well, but I think I need to understand the timing of a meter before I have add another, because it seems that I can't have two counters to the same task). Any help on this would be greatly appreciated.

LabVIEW version 13.0

Chassis cDAQ-9178 with NI 9401 for both counter inputs and NI 9205 for the analog inputs.

Thank you!

Richard

I know the error requires to restart the task at least (this particular error puts the material in a State that cannot be recovered from during execution of the task - I've been down this road before) but I'm surprised that you would have to delete and re-create the task altogether. And then I had to do this to workaround other questions in the past. It is awkward and should be considered a bug, if this is indeed the behavior.

Honestly, regardless of this bug, the way the material dealing with the situation of several sample clock edges makes measures of sampling frequency clocked essentially unusable for purposes of synchronization (in my opinion anyway) If you encounter a more slow than your sample clock rate. You are supposed to be "synchronization" of the measure, but it really no longer applies if you have to restart the task over and over again (if you must delete it or not).

Workarounds can get kind of creation (which isn't really a good thing). For example, you can configure a measure of implicit frequency to keep a buffer of frequencies and use a leader board task (source is the frequency signal, sample clock is the sample clock HAVE) to establish a correlation between the index of your buffer of frequency for singing HAVE sample clock.

Best regards

Mail creation of massive log files and stop the synchronization with the server

Since the upgrade to El Capitan (10.11.1), Mail presents two problems persist:

(1) it generates massive log files, e.g. 2015-12 - 03_IMAPSyncActivity.log these files regularly exceed 10 GB and block Mail and freeze the Mac. Mail can be over 8 GB of RAM. Once removed, Mail recreates the file and fills again, ends up doing more massive files that must also delete.

(2) mail stop sync with my different IMAP e-mail servers. The only solution I've found that it completely delete the or the e-mail accounts and reinstalls the account. It works for a day (or even a few hours) before it just stops the synchronization, even if a connection test shows he connects with the server. This problem seems to occur on two e-mail accounts separately on two different servers / hosting companies, but not on my Gmail accounts.

These two problems occur on both my iMac (21.5 ", mid-2011, 2.5 GHz Intel Core i5, 8 GB RAM) and MacBookPro (13', mid-2011, 2.5 GHz Intel core i5, 4 GB RAM).

Full of ideas gratefully received!

Thank you!

Please take these steps to remove the mail folders 'sandbox '.

Step 1

Back up all data.

Triple-click anywhere in the line below on this page to select this option:
```
~/Library/Containers/com.apple.mail
```
Right-click or Ctrl-click on the highlighted line and select

Services ▹ Reveal

the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

Restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

Step 2

If step 1 does not resolve the problem, repeat with this line:
```
~/Library/Containers/com.apple.MailServiceAgent
```
* If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

Go ▹ go to the folder...

from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

Windows Vista will not synchronize with internet time server

I am running Windows Vista Business SP2 and Norton Internet Security on a Lenovo T61. All updates for Windows, Norton and Lenovo have been applied. When I try to synchronize with a time server Internet, I get the error message ' year error occurred while synchronizing with time.windows.com "I tried each of the other servers listed time and still get the same error message. I spent reviewing the configuration of the firewall in time of Norton Internet Security and S32 and port 123 are enabled. I tried to synchronize with the two Norton Internet Security Firewall on and outside, with the same results. I have internet google and looked for a solution of Microsoft. After reading all the posts relating, I tried the following:

running administrative invite

net stop w32time

w32tm /unregister

w32rm /register

net start w32time

Each performed positively.

This has not solved the problem. I then ran:

w32tm/config /update

This is performed in a positive way.

This has not solved the problem. I then ran:

w32tm/Resync /rediscover

He responded with "the computer did not resync because no time data was available"

I then ran:

w32tm/query/status

He responded with "last successful synchronization time: not specified.

The local Group Policy Editor reads for providers of Service/Computer Configuration/Windows Administrative Templates/time/system time

Configure Windows NTP Client not configured

Enable Windows NTP Client not configured

Enable Windows NTP server not configured

In summary, it seems that my computer has never synchronized with an Internet server time.

If you need additional information, please provide specific instructions on how to get it and I will provide.

From time to time, I checked to see if I resync of internet time.

Out of the Blues started windows resynchronize.

The only change I can think is that AT & T reset head of communications AT & T defaults shortly before he started work. This tends to confirm my opinion that it was a problem of communication.

PROBLEM SOLVED!

Problem of election after split-drain repeated with two nodes
Hello

I use a custom source based on BDB - 5.1.19 (excxx_repquote)

with two site-MASTER and SLAVE on the other...

NSite = 2
ACK = quorum

-the master is written at the rate of 10 txn quotedb per second
-l' test is to isolate the customer from the master (brain) and reconnect after a random time include 1 sec to 10 sec

the test run of about 10 times, but at some point, the slave to process receive DB_EVENT_REP_ELECTION_FAILED
and the captain enter the mode of election and never leave the CLIENT mode. I have to say that I decided to freeze the client to kill me (kill-9 my pid) when I get this event...

Here is the log in light on the master...

[1307872770:871621] [6510/47655809107168] MASTER: rep_send_function returned: 110
[1307872770:973655] [6510/47655809107168] MASTER: bulk_msg: Send copy due to PERM after buffer
[1307872770:973667] [6510/47655809107168] MASTER: send_bulk: send 266 bytes of the buffer in bulk (0x10a)
[1307872770:973672] [6510/47655809107168] MASTER: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type bulk_log, LSN [21] [986648] perm
[1307872770:973693] [6510/47655809107168] MASTER: wait for the acknowledgement of receipt: need 1
[1307872771:26623] [6510/47655809107168] MASTER: rep_send_function returned: 110
[1307872771:126380] [6510/1162996032] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, Journal type, LSN [21] [946345]
[1307872771:126407] [6510/1162996032] MASTER: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type dupmaster, LSN [0] [0] nobuf
[1307872771:126695] [6510/1162996032] MASTER: rep_start: old version 17 journal found
[1307872771:126753] [6510/1162996032] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type newclient, LSN [0] [0] nobuf
[1307872771:126833] [6510/1183975744] CUSTOMER: from the election thread
[1307872771:126876] [6510/1183975744] CLIENT: Start election Europe 2, ack 1, priority 100
[1307872771:126890] [6510/1183975744] CLIENT: Election thread has egen 69
[1307872771:127423] [6510/1173485888] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type newclient, LSN [0] [0]
[1307872771:130079] [6510/1183975744] CLIENT: count VOTE1 [0] (2147483647, 69)
[1307872771:130113] [6510/1183975744] CLIENT: count an election
[1307872771:130134] [6510/1183975744] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type vote1, LSN [21] [986728] nobuf
[1307872771:130147] [6510/1173485888] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type master_req, LSN [0] [0] nobuf
[1307872771:130438] [6510/1152506176] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21] [946437]
[1307872771:130460] [6510/1162996032] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [21] [986728]
[1307872771:130467] [6510/1152506176] CLIENT: update of gen from 68 to 70
[1307872771:130482] [6510/1162996032] CLIENT: received egen ALIVE of 71, 69 mine
[1307872771:130503] [6510/1162996032] CLIENT: Election completed in 0.003602000 sec
[1307872771:130515] [6510/1162996032] CLIENT: Election; Egen 70
[1307872771:130534] [6510/1152506176] CLIENT: received vote1 egen egen 71, 71
[1307872771:130581] [6510/1152506176] CLIENT: count VOTE1 [0] (0, 71)
[1307872771:130593] [6510/1089075520] CUSTOMER: from the election thread
[1307872771:130619] [6510/1152506176] CLIENT: Vote Incoming: (eid) 0 (pri) 100 ELECTABLE (gen) 70 (egen) 71 [21,946437]
[1307872771:130642] [6510/1152506176] CLIENT: not in election, but receipts vote1 0x282c 0x8
[1307872771:130674] [6510/1089075520] CLIENT: Start election Europe 2, ack 1, priority 100
[1307872771:130692] [6510/1089075520] CLIENT: Election thread has 71 egen
[1307872771:130704] [6510/1194465600] CUSTOMER: from the election thread
[1307872771:130733] [6510/1194465600] CLIENT: Start election Europe 2, ack 1, priority 100
[1307872771:132922] [6510/1089075520] CLIENT: count VOTE1 [1] (2147483647, 71)
[1307872771:132949] [6510/1089075520] CLIENT: accept the new vote
[1307872771:132958] [6510/1089075520] CLIENT: count an election
[1307872771:132973] [6510/1089075520] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, type vote1, LSN [21] [986728] nobuf
[1307872771:132985] [6510/1194465600] CLIENT: fate of election thread
[1307872771:133012] [6510/1089075520] CLIENT: count VOTE2 [0] (2147483647, 71)
[1307872771:133037] [6510/1089075520] CLIENT: counted my vote 1
[1307872771:133048] [6510/1089075520] CLIENT: jump phase2 waiting: already had 1 vote
[1307872771:133060] [6510/1089075520] CLIENT: got enough votes to win. election of fact; Gen (prev) 70
[1307872771:133071] [6510/1089075520] CLIENT: Election completed in 0.002367000 sec
[1307872771:133084] [6510/1089075520] CLIENT: Election; Egen 72
[1307872771:133111] [6510/1089075520] CLIENT: flag of election ending in 0, e_th 1, egen 72, 0x2a2c, e_fl, 0x0, lo_fl 0 x 6
[1307872771:133170] [6510/1173485888] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [0] [0]
[1307872771:133187] [6510/1173485888] CLIENT: Racing replication msg lockout, ignore the message.
[1307872771:173744] [6510/1162996032] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0] [0]
[1307872771:173769] [6510/1162996032] CLIENT: Racing replication msg lockout, ignore the message.
[1307872771:231593] [6510/1183975744] CLIENT: flag of election ending in 0, e_th 0, egen 72, 0x2a2c, e_fl, 0x0, lo_fl 0x1c
[1307872771:231629] [6510/1183975744] CLIENT: fate of election thread
[1307872777:443794] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
[1307872971:644194] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
[1307873165:844583] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
[1307873360:44955] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
[1307873554:245347] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
[1307873748:445736] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
[1307873942:646117] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
[1307874136:846509] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init

... and stay infinite this situation

My question is why the master is suddenly transformed into CUSTOMER and why he never returns to the MASTER

Thanks in advance...

Here is the log for the customer

[1307872315:455113] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [984396]
[1307872315:455134] [1282/1160603968] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [984483] perm
[1307872315:609962] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [984733] perm
[1307872315:764958] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [984986] perm
[1307872315:919962] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985238] perm
[1307872316:75018] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985491] perm
[1307872316:229959] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985741] perm
[1307872316:384949] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985993] perm
[1307872316:499899] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [986141] perm
[1307872316:539895] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [986221]
[1307872316:540078] [1282/1171093824] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [986307]
[1307872316:540100] [1282/1160603968] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [986394] perm
[1307872316:694950] [1282/1171093824] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [986648] perm
[1307872316:847349] [1282/1129134400] MASTER: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, Journal type, LSN [21] [946345]
[1307872316:847698] [1282/1171093824] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, dupmaster, LSN type [0] [0]
[1307872316:847999] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type newclient, LSN [0] [0]
[1307872316:848168] [1282/1171093824] MASTER: rep_start: old version 17 journal found
[1307872316:848222] [1282/1181583680] CLIENT: Racing replication msg lockout, ignore the message.
[1307872316:848398] [1282/1171093824] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, type newclient, LSN [0] [0] nobuf
[1307872316:848504] [1282/1192073536] CUSTOMER: from the election thread
[1307872316:848542] [1282/1192073536] CLIENT: Start election Europe 2, ack 1, priority 100
[1307872316:848566] [1282/1192073536] CLIENT: Election thread has 71 egen
[1307872316:849634] [1282/1192073536] CLIENT: count VOTE1 [0] (2147483647, 71)
[1307872316:849654] [1282/1192073536] CLIENT: count an election
[1307872316:849680] [1282/1192073536] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, type vote1, LSN [21] [946437] nobuf
[1307872316:851403] [1282/1160603968] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type vote1, LSN [21] [986728]
[1307872316:851448] [1282/1160603968] CLIENT: received vote1 egen egen 69, 71
[1307872316:851470] [1282/1160603968] CLIENT: received the old vote egen 69, 71, ignoring vote1
[1307872316:851481] [1282/1160603968] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [21] [986728] nobuf
[1307872316:851538] [1282/1171093824] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, master_req, LSN type [0] [0]
[1307872316:851558] [1282/1171093824] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [0] [0] nobuf
[1307872316:854254] [1282/1160603968] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21] [986728]
[1307872316:854275] [1282/1160603968] CLIENT: received vote1 egen egen 71, 71
[1307872316:854317] [1282/1160603968] CLIENT: count VOTE1 [1] (0, 71)
[1307872316:854339] [1282/1160603968] CLIENT: Vote Incoming: (eid) 0 (pri) 100 ELECTABLE (gen) 70 (egen) 71 [21,986728]
[1307872316:854353] [1282/1160603968] CLIENT: Vote existing: (eid) 2147483647 (pri) 100 (gen) 70 (sites) 2 [21,946437]
[1307872316:854369] [1282/1160603968] CLIENT: accept the new vote
[1307872316:854379] [1282/1160603968] CLIENT: Election of phase 1 done
[1307872316:854395] [1282/1160603968] CLIENT: vote for 0
[1307872316:854407] [1282/1160603968] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0] [0] nobuf
[1307872317:960344] [1282/1192073536] CLIENT: after the phase 2: votes 0, nvotes 1, Europe 2
[1307872317:960389] [1282/1192073536] CLIENT: Election completed in 1.111809000 sec
[1307872317:960401] [1282/1192073536] CLIENT: Election; Egen 72
[1307872317:960412] [1282/1192073536] CLIENT: flag of completed election with-30974, e_th 0, egen 72, 0x282c, e_fl, 0x0, lo_fl 0x0
Kill me!

-my source

on the master, I executed manually:

txn_rate 1
loop_rate 10
loop 1 20000

------
/*-
* See the file LICENSE for redistribution information.
*
* Copyright (c) 2001-2010 Oracle and/or its affiliates. All rights reserved.
*
* $Id$
*/

/*
* In this application, specify us all communications via the command line. In
* a real application, one would expect that the information on other sites
* in the system would be maintained in a sort of configuration file. The
* most of this interface, it is that we assume at the start that we can
* knowledge
(* 1) what is our environment home Berkeley DB,.
(* 2) which host/port we want to hear about the connections. and
(* 3) an optional list of other sites, we should try to connect to.
*
* These items of information are expressed by the following indicators.
* h House (required; h means home directory)
*-l host: port (required; l means local)
* - C or - M (optional; will start as customer or master)
* r - host: port (optional; r mean distance; no matter how many of them may be)
* specified)
* R - host: port (optional; R stands for the remote peer; only one of them can
* to be specified)
* - an all the | quorum (optional; a is synonymous with the ACK policy)
* b (optional; b means in bulk)
* Europe - n (optional, number of sites in the replication group; default is 0)
* to try to dynamically calculate Europe)
* priority Pei (optional; default is 100)
* - v (optional; v means verbose)
*/

#include < cstdlib >
#include < a > cstring

#include < iostream >
#include < String >
#include < sstream >

#include < sys/types.h >
#include < signal.h >

#include < db_cxx.h >
#include "RepConfigInfo.h".
#include "dbc_auto.h".

using std::cout;
using std::cin;
using std::cerr;
using std::endl;
using std::ends;
using std::flush;
using std::istream;
using std::istringstream;
using std::ostringstream;
using std::string;
using std::getline;

#include < stdio.h >
#include < readline/readline.h >
#include < readline/history.h >

#define CACHESIZE (10 * 1024 * 1024)
#define of DATABASE 'quote.db '.
#define «quote2.db» base2

const char * progname = "excxx_repquote";

#include < errno.h >
#ifdef _WIN32
#define WIN32_LEAN_AND_MEAN
#include < windows.h >
#define _snprintf snprintf
#define sleep (s) sleep (1000 * (s))

extern "C" {}
extern int getopt (int, char * const *, const char *);
extern char * optarg;
}

typedef HANDLE thread_t;
typedef DWORD thread_exit_status_t;
#define thread_create (thrp, attr, func, arg).
(((* (thrp) = CreateThread (NULL, 0,-))))
(LPTHREAD_START_ROUTINE) ((((func), (arg), 0, NULL)) == NULL)? (1: 0)
#define thread_join (thr, statusp).
((WaitForSingleObject ((THR), Infinite) == WAIT_OBJECT_0) & & \)
GetExitCodeThread ((thr), (LPDWORD) (statusp))? 0: - 1).
#else / *! _WIN32 * /.
#include < pthread.h >

typedef pthread_t thread_t;
typedef void * thread_exit_status_t;
#define thread_create (thrp, attr, func, arg).
pthread_create ((thrp), (attr), (func), (arg))
#define (thr, statusp) thread_join pthread_join ((thr), (statusp))
#endif

Struct used to store information in the field of app_private Db.
typedef struct {}
bool app_finished;
bool in_client_sync;
bool is_master;
bool no_dummy_wr;
} APP_DATA.

public static void log(const char *);
void checkpoint_thread (Sub );
void log_archive_thread (Sub );
void dummy_write_thread (Sub );

Class RepQuoteExample {}
public:
RepQuoteExample();
void init (RepConfigInfo * config);
void doloop();
terminate() int;

public static void event_callback (DbEnv * dbenv, u_int32_t, void * info);
void print_stocks_size(Db *dbp);

private:
disable the copy constructor.
RepQuoteExample(const RepQuoteExample &);
void operator = (const RepQuoteExample &);

internal data members.
APP_DATA app_data.
RepConfigInfo * app_config;
DbEnv cur_env;
thread_t ckp_thr;
thread_t lga_thr;
thread_t dmy_thr;

private methods.
void print_stocks(Db *dbp);
void print_env(DbEnv *dbenv);

prompt() Sub;
};

RepQuoteExample * g_runner = NULL;
RepConfigInfo * g_config = NULL;

Class DbHolder {}
public:
DbHolder ( env, const char _dbname DbEnv): env (env)
{
DBP = 0;
If (_dbname) dbname = _dbname;
else dbname = database;
}

{~ DbHolder()}
try {}
Close();
} catch (...) {
Ignore: this may mean that another exception is waiting
}
}

bool ensure_open (bool creation) {}
If (dbp)
return (true);
DBP = new Db (env, 0);

u_int32_t flags = DB_AUTO_COMMIT;
If (creation)
flags | = DB_CREATE;
try {}
DBP-> open (NULL, NULL, DB_BTREE, DATABASE, flags, 0);
DBP-> open (NULL, dbname, NULL, DB_BTREE, flags, 0);
DBP-> open (NULL, NULL, dbname, DB_BTREE, flags, 0);
return (true);
} catch (DbDeadlockException e) {}
} catch (DbRepHandleDeadException e) {}
} catch (DbException e) {}
If (e.get_errno () == DB_REP_LOCKOUT) {}
Just fall through.
} ElseIf (e.get_errno () == ENOENT & &! creation) {}
Provide a little extra explanation.
//
Log ("Stock DB is not still exist");
} else
throw;
}

(All renewable errors pass here).
//
Log ("Please try again");
Close();
Return (false) End Function
}

{} void close()
If {(dbp)
try {}
DBP-> close (0);
Remove dbp;
DBP = 0;
} catch (...) {
Remove dbp;
DBP = 0;
throw;
}
}
}

operator Db * () {}
return of dbp;
}

DB * operator-> () {}
return of dbp;
}

private:
DB * dbp;
DbEnv * env;
const char * dbname;
};

Class StringDbt: public {Dbt
public:
#define GET_STRING_OK 0
#define GET_STRING_INVALID_PARAM 1
#define GET_STRING_SMALL_BUFFER 2
#define GET_STRING_EMPTY_DATA 3
int get_string (char * buf, size_t buf_len)
{
size_t copy_len;
int ret = GET_STRING_OK;
If (buf == NULL) {}
ECRR < < "Invalid entry to get_string stamp" < < endl;
Return GET_STRING_INVALID_PARAM;
}

Make sure that the string is null terminated.
Memset (* buf, 0, buf_len);

If there is no string, simply return.
If (get_data() == NULL | get_size() == 0)
Return GET_STRING_OK;

If (get_size() > = buf_len) {}
RET = GET_STRING_SMALL_BUFFER;
copy_len = buf_len - 1; save room for a terminator.
} else
copy_len = get_size();
memcpy (* buf, get_data(), copy_len);

return ret;
}
size_t get_string_length()
{
If (get_size() == 0)
return 0;
Return strlen ((char *) get_data());
}
Sub set_string(char *string)
{
SET_DATA (String);
set_Size ((u_int32_t) strlen (String));
}

StringDbt(char *string):
DBT (string, (u_int32_t) strlen (string)) {};
StringDbt(): Dbt() {};
~ StringDbt() {};

Do not add additional data to this subcategory because we want to keep it
compatible with objects Dbt created in-house by Berkeley DB.
};

DB * g_repquote = NULL;

RepQuoteExample::RepQuoteExample(): app_config (0), cur_env (0) {}
App_Data.app_finished = 0;
App_Data.in_client_sync = 0;
App_Data.is_master = 0; Suppose I have as a customer initially
App_Data.no_dummy_wr = 0; prevent to run dummy writing
}

/*
int (* old_rep_process_message)
__P ((DB_ENV *, DBT *, DBT *, int, DB_LSN *));

int my_rep_process_message __P ((DB_ENV DBT, arg1 , arg2, arg3, arg4 int, DB_LSN $arg5 DBT))
{
printf ("EZ-> > > my_rep_process_message:%p\n",arg5 ");
old_rep_process_message (Arg1, Arg2, Arg3, Arg4, $arg5);
}
*/

void RepQuoteExample::init(RepConfigInfo *config) {}
app_config = config;

cur_env.set_app_private (& App_Data);
cur_env.set_errfile (stderr);
App_Data.no_dummy_wr = config-> no_dummy_wr;
If (app_data.no_dummy_wr)
printf ("no dummy! \n");

EZ-> cur_env.set_errpfx (progname);
cur_env.set_event_notify (event_callback);

Configure the transfer block to send groups of documents to customers
When a single network transfers. This is useful for sites of masters
and customers participating in the synchronization from client to client.
//
If (app_config-> in bulk)
cur_env.rep_set_config (DB_REP_CONF_BULK, 1);

Set the total number of sites in the replication group.
It is used by the treatment of election internal repmgr.
//
If (app_config-> totalsites > 0)
cur_env.rep_set_nsites (app_config-> totalsites);

Turn on the output of debugging and application information.
If (app_config-> verbose)
cur_env.set_verbose (DB_VERB_REPLICATION, 1);

cur_env.set_verbose (DB_VERB_REPMGR_MISC, 1);
cur_env.set_verbose (DB_VERB_RECOVERY, 1);
cur_env.set_verbose (DB_VERB_REPLICATION, 1);
cur_env.set_verbose (DB_VERB_REP_ELECT, 1);
cur_env.set_verbose (DB_VERB_REP_LEASE, 1);
cur_env.set_verbose (DB_VERB_REP_SYNC, 1);
cur_env.set_verbose (DB_VERB_REPMGR_MISC, 1);

Set the priority of replication for this environment group election.
An election first selects the site with the most recent log
documents such as the new master. If several sites are the most
recent log records, the site with the highest priority value
is selected as the master.
//
cur_env.rep_set_priority (app_config-> priority);

Set the policy that determines how master and client sites
treat the acknowledgment of replication messages required for
permanent record. The default policy of "quorum" requires only
a quorum of the likely to be elected peers sufficient to ensure a permanent
record remains durable if the election is held. The option 'all '.
requires that all clients to recognize a permanent replication
message instead.
//
cur_env.repmgr_set_ack_policy (app_config-> ack_policy);

Set the threshold for the minimum and maximum of the client time
wait before asking the retransmission of a missing message.
These core values on the characteristics of performance and load
host master and client as well as the tower platforms
message trigger time.
//
cur_env.rep_set_request (20000, 500000);

Configure the detection of blockages to ensure that blockages of locks?
are broken by the presence of one of the queries of locks in conflict
has rejected. DB_LOCK_DEFAULT uses the specified lock strategy
at the time of the creation environment or DB_LOCK_RANDOM if none has been
specified.
//
cur_env.set_lk_detect (DB_LOCK_DEFAULT);

The following features of the basic replication can also be useful to your
request. See Berkeley DB documentation for more details.
-Master leases: strict consistency for data reads
on a main site.
-Delivery time: Customize the amount of time that waiting for Berkeley DB
for such things as the election must be concluded or a master
lease to be granted.
-Client synchronization delay: managing the main site
resources by spreading intensive customer resources
synchronizations.
-Blocked customer operations: return immediately with an error
rather than wait indefinitely if a customer is operation
blocked by a current client synchronization.

cur_env.repmgr_set_local_site (app_config-> this_host.host,
app_config-> this_host.port, 0);

for (REP_HOST_INFO * cur = app_config-> other_hosts; cur! = NULL;)
Cur = cur-> next) {}
cur_env.repmgr_add_remote_site (cur-> host, cur-> port,
NULL, cur-> peers? DB_REPMGR_PEER: 0);
}

Configure heartbeat timeouts so that repmgr monitors the
health of the TCP connection. Master sites disseminate a heartbeat
at the frequency specified by the timeout DB_REP_HEARTBEAT_SEND.
Customer sites waiting for activity of the messages of the length of the
DB_REP_HEARTBEAT_MONITOR timeout before concluding that the
connection to the master is lost. The DB_REP_HEARTBEAT_MONITOR
timeout must be longer than the time-out DB_REP_HEARTBEAT_SEND.
//
cur_env.rep_set_timeout (DB_REP_HEARTBEAT_SEND, 5000000);
cur_env.rep_set_timeout (DB_REP_HEARTBEAT_MONITOR, 10000000);

The following features of repmgr can also be useful to your
request. See Berkeley DB documentation for more details.
-Regulates two sites of strict majority - in a two-site replication
the group, to ask the two sites are available to elect a new
master.
-Timeout - customize the amount of time repmgr awaits
for things as pending or try thanks
to reconnect to other sites.
-The site list - returns a list of currently known sites at repmgr.

Now we can open our environment, although we are not ready to
start replication. However, we want to have a dbenv autour
so that we can send it in one of our message handlers.
//
cur_env.set_CacheSize (0, CACHESIZE, 0);
cur_env.set_flags (DB_REP_PERMANENT, 1);
cur_env.set_flags (DB_TXN_WRITE_NOSYNC, 1);

/ * u_int32_t maxlocks = 300000;
If (maxlocks! = 0)
cur_env.set_lk_max_locks (MAXLOCKS);

u_int32_t maxlocks_o = 300000;
If (maxlocks_o! = 0)
cur_env.set_lk_max_objects (maxlocks_o);

u_int32_t maxmutex = 300000;
If (maxmutex! = 0)
cur_env.mutex_set_max (maxmutex);
*/

DbEnv * m_env = & cur_env;
m_env-> set_flags (DB_TXN_NOSYNC, 1);
m_env-> set_lk_max_lockers (60000);
m_env-> set_lk_max_objects (60000);
m_env-> set_lk_max_locks (60000);
m_env-> set_tx_max (60000);

m_env-> repmgr_set_ack_policy (DB_REPMGR_ACKS_NONE);

m_env-> rep_set_timeout (DB_REP_ACK_TIMEOUT, 50 * 1000); 50ms
m_env-> rep_set_timeout (DB_REP_CHECKPOINT_DELAY, 0);
m_env-> rep_set_timeout (DB_REP_CONNECTION_RETRY, 30 * 1000 * 1000); 30 seconds
m_env-> rep_set_timeout (DB_REP_ELECTION_TIMEOUT, 1 * 1000 * 1000); 5 seconds
m_env-> rep_set_timeout (DB_REP_FULL_ELECTION_TIMEOUT, 5 * 1000 * 1000); 5 seconds
m_env-> rep_set_timeout (DB_REP_CONNECTION_RETRY, 5 * 1000 * 1000);
m_env-> rep_set_timeout (DB_REP_ELECTION_RETRY, 10 * 1000 * 1000); 10 seconds

m_env-> rep_set_timeout (DB_REP_HEARTBEAT_MONITOR, 80 * 1000 * 1000); 80 seconds
m_env-> rep_set_timeout (DB_REP_HEARTBEAT_SEND, 500 * 1000); 500 milliseconds

The minimum number of microseconds that a client will wait before requesting a retransmission
u_int32_t rep_req_min = 40000; 40 000 microsec = 40 mili
The maximum number of milliseconds that a client will wait before requesting a retransmission
u_int32_t rep_req_max = 1280000. / / 1 280 000 microsec = 1.28 sec

u_int32_t rep_limit_gbytes = 0;
u_int32_t rep_limit_bytes = 100 * 1024 * 1024; 100 MB
m_env-> rep_set_request (rep_req_min, rep_req_max);
m_env-> rep_set_limit (rep_limit_gbytes, rep_limit_bytes);

cur_env. Open (app_config-> homepage, DB_CREATE |) DB_RECOVER |
DB_THREAD | DB_INIT_REP | DB_INIT_LOCK | DB_INIT_LOG |
DB_INIT_MPOOL | DB_INIT_TXN, 0);

keep the old string function
old_rep_process_message = cur_env.get_DB_ENV ()-> rep_process_message;
deviant
cur_env.get_DB_ENV ()-> rep_process_message = my_rep_process_message;

/ * int _i;
cur_env.log_get_config (DB_LOG_DIRECT & _i); printf ("DB_LOG_DIRECT = %d\n",_i);
cur_env.log_get_config (DB_LOG_DSYNC & _i); printf ("DB_LOG_DSYNC = %d\n",_i);
cur_env.log_get_config (DB_LOG_AUTO_REMOVE & _i); printf ("DB_LOG_AUTO_REMOVE = %d\n",_i);
cur_env.log_get_config (DB_LOG_IN_MEMORY & _i); printf ("DB_LOG_IN_MEMORY = %d\n",_i);
cur_env.log_get_config (DB_LOG_ZERO & _i); printf ("DB_LOG_ZERO = %d\n",_i);
*/

Start checkpoint and newspaper archive support threads.
(void) thread_create (& ckp_thr, NULL, checkpoint_thread, & cur_env);
(void) thread_create (& lga_thr, NULL, log_archive_thread, & cur_env);
(void) thread_create (& dmy_thr, NULL, dummy_write_thread, & cur_env);

cur_env.repmgr_start (3, app_config-> start_policy);
}
The detailed output shows that the site has won the election and the
RepMgr code calls rep_start to become the master, but he is stuck
waiting for a txn or a cursor to be resolved before this change of State
may occur. I have not studied your application code. But if you have a
cursor or txn, underway at the time, then you must resolve before
the site may change the State.

If you can reproduce this, it would be useful to see the stack traces
the threads. That could confirm or deny that, in my view, I see.

Sue LoVerso
Oracle

Outlook cannot synchronize with icloud for today

Today, Outlook 2011 fails to synchronize with iCloud IMAP. Until yesterday it worked very well with "p01 - imap.mail.me.com" as a server but, since this morning, I have nothing. Perhaps it is due to new security double, but Outlook has nothing to deal with and there is no way, I think, to disable.

I tried to change it to "imap.mail.me.com", I also tried to change the name of the user with or without "@me.com", I tried without SSL...

Mail connects and syncs seamlessly with iCloud, but Outlook cannot

OK, now I have the answer: it is because of the new two-step verification.

I searched how to disable this check in two steps, because it is very annoying. Whenever I am connected to something that I had to wait for six figures sent to another device. So I found that it is possible to disable this check in two steps on the web site of iCloud in the account settings.

I disabled the two-step verification, and a few seconds later, Outlook has been able to sync again with iCloud IMAP.

OMG I can't synchronize with the work on my new machine.

I have two PC, a desktop computer and a laptop, that I bought at the same time and was able to synchronize with zero problems. Now, I've added a second desktop computer, WHO ABSOLUTELY REFUSES TO EVEN PRETEND to SYNC. All three machines are running 31 Firefox. I followed the instructions from web to reset the synchronization version to the new. All THE THREE MACHINES have now told me, 'Sync activated. Firefox will start synchronizing momentarily,"who, it is shocking enough, that's all that never happens. I lived about each article on this site about synchronization support and tried all the different possible combinations of signature, signature, hit the button 30 times, that sort of thing and I am now very frustrated and annoyed. I work online and I need these machines freakin ' and a web browser to work and my favorites and my passwords and my story. Anyone with (effective) words of wisdom would be appreciated, thanks.

Hi flowerdaemon,
Thank you for your question. I understand that the third computer will not sync.

I came across this last week as well when I change the password and add a test profile. That's what I did:
1. Removed from the account Options/Preferences > Sync
2. I've compiled a profile folder, do this a habit of losing the school documents.
3. Added the account again and went to accounts.firefox.com
4. Logged on this page and I saw the "your sync will begin momentarily.
5. Waited about 5 minutes for the first synchronization by default.
6. Then you click on tools > synchronize now
After that I saw my data and everything was in sync with the other profiles.

Problem setting up Port Forwarding with two routers.

I can't set up by Linksys RT31P2 and routers port forwarding WRT160Nv3.

My setup is Webstar Modem = RT31P2 = WRT160N = Mac OS 10.6.5. (No configurable modem and ISP do not prevent port forwarding. It comes with two Linksys routers).

I had a Monty Python-going around with the support of Cisco cat; and follow up with telephone assistance in which the agent knew nothing about port forwarding and his supervisor expressed the view that it was not possible with two routers. Sigh.

If anyone can help me with step by step specific and simple instructions to configure routers. I know that the basic procedures. I'm not clear, what exactly changes on routers.

I read that portforward.com has to say and it does not work so I must be misunderstanding something.

The ip address of my computer is 192.168.1.103. Are the last three digits of this speech concluded the two routers in the area on the port forwarding page? What other changes should be done what router?

I know the port numbers that I use are OK because I can implement successfully if I connect to one or other of the routers (but not both), and my software of p2p shows port are open.

Any help and suggestions most welcome.

If you set up as I have suggested that you have only a single LAN that will be using in your addresses * 192.168.15 case. So in your case:

1. change the address LAN IP of 192.168.1.1 to 192.168.15.2 WRT.
2 disable the DHCP server.
3. connect the LAN of the WRT port to port LAN of the RT.

That's all. Disable the DHCP server will not affect whatever it is that you're connected LAN - LAN and DHCP server on the RT is still operational.

After the change, previously the WRT computers may require a reboot to get a new address 192.168.15. *.

Your computer to which you are transferring must have an IP static and not dynamic (or variable). Check the current IP information on this computer. It must have an IP address like 192.168.15.103, mask 255.255.255.0, gateway 192.168.15.1 subnet and DNS 192.168.15.1 server or maybe two other IP addresses instead. Note DNS servers if you do not 192.168.15.1.

Then configure a static IP address on the computer. Use something like 192.168.15.10, 255.255.255.0 gateway 192.168.15.1 and the DNS servers you found before.

After this implement 192.168.15.10 port forwarding.

Two R810s, each with two 8Gb Fiber Channel HBA + MD3620F + MD1220

Hi people.

I am planning an installation on this end, and I'm tender hand in the hope that the community can help me carry this all together.

To explain, I have two servers Dell PowerEdge R810, each with two 8 GB HBA Fibre Channel adapters.

I also have a Bay SAN of Dell PowerVault MD3620F 8 Gbps, with two controllers.

I also have a Dell PowerVault MD1220 DAS SAS Expander Bay.

I think to connects both R810 servers directly to the MD3620F, in order to consume all ports of four CF on the MD3620F. That is, one in each controller, from two HBAs in each server. (I can do this, or do I need a Fibre Channel switch? The MD3620F has 4 available ports, 2 per controller, so it would seem to be a natural configuration for only these two servers)

Then, I will link the MD1220 to the MD3620F, so that its readers are also accessible through the two R810s on the link of Fiber Channel 8 Gbps. (what is the process to connect a MD1220 to a MD3620F?)

Thoughts, tips, suggestions?

Thank you

-Wentil

Hello Wentil,

Here is a link to our deployment guide. FTP://FTP.Dell.com/manuals/common/PowerVault-md3600f_Deployment%20Guide_en-us.PDF . in the deployment guide, we show how you can do an install direct attach & network attached using a fiber switch.

Please let us know if you have any other questions.

PAT for two web servers

Hi all.

I want to change the MS ISA for Cisco ASA server, but I have problem with PAT.

The two addresses are published under the same internet address 1.1.1.1 MS ISA server configured static PAT for two web servers, example.web1.com inside the address 192.168.1.10 and example.web2.com inside the address 192.168.1.11.

When the user try to open the web page example.web1.com the internet ISA Server MS create translates an internal address 192.168.1.10

When the user try to open the web page example.web2.com the internet ISA Server MS create translates an internal address 192.168.1.11.

In the cisco example uses single address:

static (inside, outside) tcp 1.1.1.1 192.168.1.10 www www netmask 255.255.255.25

but I have two web servers uses the same port 80 and even outside of the address 1.1.1.1

SAA can create translation URL? For example:

static (inside, outside) tcp example.web1.com, www www 192.168.1.10 netmask 255.255.255.255

static (inside, outside) tcp example.web2.com 192.168.1.11 www www netmask 255.255.255.255

Hello

To my knowledge, this type of NAT is not possible in the SAA.

The ASA has nothing to differentiate the 2 translations to eachother other than the order of the NAT configurations. But I think that at the level of your software it doesn't accept even the second NAT configuration that it overlaps with the first. In the most recent software that it would accept the second configuration, but the traffic would still be hit only one of the NAT configurations.

There must be something on the ISA MS who, in addition to NAT overlapping, knows that static PAT choose based on the requested web page?

-Jouni

Tour of blackBerry 9630 - entries in the address book multiple Smartphones / synchronize with Outlook 2007

All data in Outlook is OK. After the initial synchronization with Tower, everything looks OK. After the opening address book two or three times, some entries

are fine – others are duplicated 4 X (categories have disappeared in all the dups).

I tried to overwrite the data on the device with Outlook data, but the problem resurfaces every time.

That is what it is?

Hello jaking777,

You can try the following:

Backup your data to the device as shown here. (We would not need the backup, but it is recommended any time you make a change to the data on the device).

Delete folder Intellisync on your PC as shown here. (This will reset your configuration of PIM in the Desktop Manager).

Clear the address book on the BlackBerry as described here only the task 2. (This will remove all contacts from the device in order to ensure that your data in Outlook are first updated.)

Go back to the Desktop Manager and reconfigure your synchronization as shown here , then test the synchronization once more.

See you soon!

Synchronize with two remote servers

Similar Questions

Maybe you are looking for