Several resources working on the same page ADF / same application

Similar Questions

• Working on the same articles in a folio

  Well, business is going a lot and now I'm getting a team work on the same folio. I guess I missed something in the assigned roles. Each team member has access to the shared folio and can download articles. But no one else (next to the original uploader) can modify/update this article to the folio without replacement on the generator. So to try to clarify: Designer creates an article and download on folio. Later, Designer B accesses the files section of server and makes changes. When open it the Designer B designer folio article is gray because they initially download. Designer of B cannot be updated or re-issued. only option is to remove and replace (which turns into strips the info that may have already been added in designer sheet-title, byline, etc...).

  Thank you!

  Looks like you have the different Setup for every designer and shared accounts folio with each account. Is this correct? Updating items in folio generator must be done from the same account that has downloaded. Other users would be able to add their own items, but no day or to delete existing articles.  We have several designers working on the same folio under a connection of the user for the folio Builder so all developers have the ability to update the files.

• Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  Hello Hans,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

  Please answer these questions to better understand the issue and help you:

  1. are - what you're talking to backup and restore functionality on Windows 7?

  2 have you made any changes to the computer before the show?

  It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information:

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Firstly - I work in InDesign CC 2015.

  My problem is, I had this 10 page document, which, on every page, shows an object that must be in PDF format - but do not print. I made this object into a button and unchecked "Printable". On top of this object, I made 10 hyperlinks (separate layer) that point to the page 1-10.

  When you export the document and I use the interactive PDF format , works ' show nonprinting object but do not print ' well, BUT hyperlinks don't. If I uncheck the "layer of nonprinting objects" in the file PDF, then hyperlinks work, but the problem now is that the nonprinting objects are invisible...

  When you export the document and I use a PDF to print the "unprintable object show but do not print" does not work BUT the hyperlinks don't...

  I put hyperlinks to post a link to pages and also tried the link to the anchor text. No difference.

  So my question is: How to export a PDF file to make nonprinting objects show but don't print not AND hyperlinks on the top of the page work at the same time?

  Thank you

  Mette from Denmark

  I swapped my links to the buttons - AND NOW IT WORKS; (o)

• Is it possible that several people can work on the same folio

  Is it possible that several people can work on the same folio?

  I usually work with a friend on my folios. We have been working directly for a dropbox folder, and together have created us a user with the same name on our macs. This gives the same path to the file, so we can never be reprinted when we work together for this user account. Works very well.

• I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  Ideas: I'm trying to download the updates to my computer, but can't. I get the error code 646 and the download fails. I tried to download the update several times, but get the same answer. What is the problem?

  • Pragrams you have problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot connect on demand (PC - Win7) - good username and password; work on the web page

  I have a big problem. I can't log on Skype on my PC (Win 7) application. The password is correct and therefore the username. I tried to connect via accounts my microsoft, Skype and facebook, but it does not work. The strange thing is that it works on the internet page. I tried to change password several times, but it's not resovle the question.

  When you connect with the Skype account I get the message "Cannot connect" (in Swedish).

  When you connect with Facebook and Microsoft account I get the message "sorry, we don't know your loggin information - please controll your Skype name and password.

  The Skype app is updated using the "Search for updates" function in the "Help" menu to the bottom of the list.

  All Skype versions prior to 6.14 are now being disconnected and this means that you can longer use the version 6.11. You must update your Skype.

  http://www.Skype.com/en/download-Skype/

• Problem in creating several attributes XML with the same name of the attribute

  I am trying without success trying to create several attributes XML with the same name, as shown here in a Microsoft example configuration file:

  
  
    
       
       
       
    
  

  I'm calling the NewDocument GetRootElement functions and then "newelement" (appSetting), "newelement" (add)

  Then I call AddAttribute with add, key & Key0, then with add, value & 0.  This seems to work fine but when I try to add the second pair of key & Key1 and value attributes & 1 for item "Add" replaces ""and I find myself with"" only.

  I do something wrong or CVI is not able to create an XML of this type?

  Thank you

  Here's how you do it. I show not to keep things simple error checking.

  #include

  public static void CreateAddElement (mother of CVIXMLElement, const char * key, const char * value)
  {
  Add the CVIXMLElement;
  CVIXMLNewElement (parent, -1, 'Add', &add);)
  CVIXMLAddAttribute (add, "touch", key);
  CVIXMLAddAttribute (add, "value", value);
  CVIXMLDiscardElement (add);
  }

  void main (void)
  {
  CVIXMLElement root, and appSetting;
  Doc CVIXMLDocument.
   
  CVIXMLNewDocument ("configuration", &doc);)
  CVIXMLGetRootElement(doc, &root);)
  CVIXMLNewElement (root,-1, "appSetting", and appSetting);
  CreateAddElement (appSetting, "Key0", "0");
  CreateAddElement (appSetting, "Key1", "1");
  CreateAddElement (appSetting, "Key2", "2");
  CVIXMLDiscardElement (appSetting);
  CVIXMLDiscardElement (root);
  CVIXMLSaveDocument (doc, 1, "c:\\temp\\temp.xml");
  CVIXMLDiscardDocument (doc);
  }

• How to tune a myself to several files/folders at the same time?

  • I have a lot of music and video files that have suddenly become unresponsive to any media player after a connection Xbox Media Center (music/videos appear, but no action follows after that as they are accessible, media players and the Xbox Media Center don't always work correctly).
  • I can play one song/video after changing its properties (security permissions), which gives full control to me, the administrator manually. -Too much work for 4000 + files.
  • My current media player is iTunes, but also Windows Media Player fails to play the music/videos.

  Thanks for the reply, but I need to know how to proceed for several files/folders at the same time.  This particular set of directions only explain how to set permissions to a single.

  In Windows Explorer, select all the folders that you want to change the property on, then right click on ONE of these folders (your selections will remain)
  Choose Properties > Security > advanced > owner > edit
  Make your changes and do not forget to check the "Replace owner...". "downstairs.

  With thousands of files, it may take a few minutes. VP Tech Services

• If I click on "PIN to the browser" the sensitive axis is unselected and vice versa. I need object "PIN at the top of the browser" and 'sensitive pine' work at the same time. Any suggestions?

  In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.

  Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.

  The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.

  Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.

  Any suggestions or workarounds will be appreciated.

  Kind regards

  Vijay

  Hi all

  Thanks for that bring to our attention. We will consider adding this feature in the future.

  RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.

  An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.

  Hope this helps,

  Anna

• Blank composition - several active triggers at the same time?

  I am trying to create a magazine layout Builder. In doing so, I have several PNG files in a blank publication.  I put it right now so that whenever you click on a trigger target Exchange with a different design element.  However, the point of my Configurator is to show how the different elements together, look what means that I have several active triggers at the same time in order to see how to watch them together.  Is there a way to do this?

  I don't think this is a feature that is available in the widget of blank publication provided by muse - there may be an external widget that can do the trick. However, if you want to try to work around him with the blank publication widget, I used this workaround solution myself:

  1. In one layer, make a widget of composition with the single trigger
  2. With layer a locked switch to two layer and do another composition directly on your first widget
  3. Be sure to check "hide target: with click" and "hide all initially" to the two widgets

  See the video provided:

  Dropbox - CompositionDemo.mov

  Hope this helps, or you find a widget on a third party site that allows you to complete your layout.

• Why ERP login does not work in the same host?

  Hello
  I installed 5 OEL and Oracle ERP 12.0.4. Everything went smoothly, all services are up & running and capable of connection/working from a remote computer on the network using microsoft xp. Why don't ERP login page does not work in the same host (linux server) using Mozilla Firefox? I missed extra configuration?
  
  Concerning

  Hello

  You go head with the downloaded version. It will work Fine.

  Thank you
  Yakub.

  Published by: 900856 on November 27, 2012 12:58 AM

• How to use several different sections of the same clip in the timeline?

  Hey, I used this tutorial as a reference for editing. I have my own equipment I want change, which includes several takes different. Is it possible to use several different sections of the same clip in the timeline? You know, like the good part of a certain record keeping. I appreciate any assistance. Thank you

  Post edited by: Kevin Monahan

  Reason: changed the title of best research opportunities

  I prefer to put the clip in the Source monitor Panel, then set the points and exit. From there you can simply drag the section of the element in the sequence.

  Or, you can make a subelement, the section will have a distinct element in the bins in the project Panel. You should always keep the original material, but now you can have real subitems to work if you prefer.

• work on the same project simultaneously on multiple computers

  Hello!

  My company recently installed captivate 6 on 4 machines.

  I would like to know if 4 people can work on different parts of the same project simultaeously on different machines and then can consolidate into a single Captivate 6 file as a single project?

  What are the disadvantages of this... or is there any duplication of work involved in this?

  This causes problems for the project in terms of links in the project, clickboxes, etc.

  Because when I open a captivate project 4 who has had several clickboxes with a jump of X or slide setting the project in captivate 6, all the joints of mailboxes got click related to slide 1 of the project.

  Am I likely to face such questions when I'm working on a project in captivate 6 on several computers and consolidate them in the end?

  Future prospects for the answer

  Thank you

  My recommendation is that if your 'project' is the creation of a course or a number of course, then you should be modularising it so that there will be a CPTX file for each module.  No two authors can work on the same file CPTX at the same time. But if you have all of the project files saved in a repository check-in-check-out of a certain type, then you can control access as you wish.  Each author will have to check the project file, that they work, download it to the hard drive of their own PC and check it after registration and closing of Captivate.  Under no circumstances try to have authors working or access project on the network files. It's asking for trouble with file corruption.

  Another precaution to take is to have all authors use the same directory for the working files structure on their PC.  These files should be ideally NOT in their own profile folders My Documents because then the paths may not be the same.

• Pages Unathorizzed and allowed in the same application

  Hello! This may seem a strange question, but I'll post it anyway.
  
  I have an application that allows users to enter data (which are care for example). I want only certain people to be able to access these pages. In the same application, I have several reports, I want anyone to be able to access it, not need to login. For now, I have divided the 2 functions in separate applications, but it is very laid back and forth between switching applications. Is it possible to do this in a single application? I don't want to duplicate reports in 2 separate applications... it would be a maintenance nightmare. Or do I need a generic connection that allows anyone to view specific pages? The 'public' users do not have to log in to view this information now, and I wouldn't have to do with this new application.
  
  Any other ideas how can I accomplish this?
  
  Thank you!
  Jodie

  Not a weird question at all. Just do a current appropriate authentication scheme and set the security attribute of each page to Page public is public.

  Scott