Logging of user interface actions

Similar Questions

• JTable.java where the user interface actions are registered?

  I'm a component out of a strongly modified JTable. I have gone through the source code of JTable (as well as BasicTableUI a a few others) and have been unable to locate where mouse click and drag and other mouse actions are recorded. I need to completely rewrite all these for my component updated the and instead of blocking or these I want to rewrite the function where they are added for the unregistering ActionMap. In addition to this, I need to do the same for several key actions. Currently, I do the following, but again, I would replace these actions with my own rather than let the actions of the default JTable.
  

  protected  boolean      processKeyBinding(KeyStroke ks, KeyEvent e, int condition, boolean pressed)
       {
            
            // Block on Ctrl + Z, and Ctrl + Y, Tab, ctrl/shift Tab, and Arrow Keys
            if(          ks == KeyStroke.getKeyStroke("ctrl pressed Z")          ||
                      ks == KeyStroke.getKeyStroke("ctrl pressed Y")          ||
                      ks == KeyStroke.getKeyStroke("pressed LEFT")          ||
                      ks == KeyStroke.getKeyStroke("ctrl pressed LEFT")     ||
                      ks == KeyStroke.getKeyStroke("shift pressed LEFT")     ||
                      ks == KeyStroke.getKeyStroke("pressed RIGHT")          ||
                      ks == KeyStroke.getKeyStroke("ctrl pressed RIGHT")     ||
                      ks == KeyStroke.getKeyStroke("shift pressed RIGHT")     ||
                      ks == KeyStroke.getKeyStroke("pressed UP")               ||
                      ks == KeyStroke.getKeyStroke("ctrl pressed UP")          ||
                      ks == KeyStroke.getKeyStroke("shift pressed UP")     ||
                      ks == KeyStroke.getKeyStroke("pressed DOWN")          ||
                      ks == KeyStroke.getKeyStroke("ctrl pressed DOWN")     ||
                      ks == KeyStroke.getKeyStroke("shift pressed DOWN")     ||
                      ks == KeyStroke.getKeyStroke("pressed ENTER")            ||
                      ks == KeyStroke.getKeyStroke("ctrl pressed ENTER")  ||
                      ks == KeyStroke.getKeyStroke("shift pressed ENTER") ||
                      ks == KeyStroke.getKeyStroke("pressed TAB")               ||
                      ks == KeyStroke.getKeyStroke("ctrl pressed TAB")       ||
                      ks == KeyStroke.getKeyStroke("shift pressed TAB")      ||
                      ks == KeyStroke.getKeyStroke("DELETE")                    ||
                      ks == KeyStroke.getKeyStroke("pressed TAB")               ||
                      ks == KeyStroke.getKeyStroke("released TAB")          )
            {               
                 return true;
            }
            else
            {
                 return super.processKeyBinding(ks, e, condition, pressed);
            }
       }

  To clarify, JTable currently Selects cells when you click and drag, I want to disable this (in order to provide my own implementation of selection).
  
  If someone could just point me to the file, class, and the function name (s) that these actions/events are registered, I would be very grateful.
  
  Thank you for your time,
  Brandon

  Hmmm... do not understand how it is possible to browse BasicTableUI and overlook methods such as installListeners, installKeyboardActions, createMouseListener createLazyActionMap... ;-)

  I forgot: the keys are not in such an obvious place - they are listed in the XXLookAndFeel

  CU
  Jeanette

• How can I keep the workstation user interface log after the closure of the workstation?

  Hello

  On a Windows host, the newspaper of the UI for desktop is called vmware - < user name > - < PID > .log and is stored in the user's TEMP directory. Now, I got a problem that occurs during the closing of the workstation. I want to check the log to see what's happening, but the user interface log is deleted automatically after the closure of the workstation.

  Is there a way to tell the workstation no do not remove the log of the user interface? Thank you.

  Well, can you try this?

  %AppData%\VMware\config.ini to edit and add:

  UI.log.FileName = "C:\some\path\to\logfile\vmui.log".
  UI.log.Keep = 'TRUE '.

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Shell of the user interface: generate a new TAB within the area with the help of a binding element.

  Hello Oracle Community:

  I work with an application based on the model of Shell user interface design.

  My use case is

  #1: start a tab Dynamics from the Navigation pane.

  #2: tab loads in the local area. (this works as expected, pictured below)

  #3: launch of the additional tabs in the page loading in the step #2.  They are triggered by simple links on the .jsff page.  (this does not work - please help.  This should work?  If so, what missing am me?)

  Question : Can I launch a new tab from a link component in the local area (page .jsff)?

  As you can see I have links on my dashboard and I want that they engage in new tabs when you click.  Please test before responding "in theory".

  

  Here's how this link is setup.

  

  

  

  Here is my error logs.

  [15: 05:23] Application deployed successfully.

  [15: 05:23] the constriction of context following URLS have been defined and can be used as a starting point for testing your application:

  [15: 05:23] http://192.168.1.154:7001 / MyAST

  [15: 05:23] for deployment time: 18 seconds

  [15: 05:23]-deployment is complete.  ----

  Run start time: 18394 ms.

  [MyAst12cUpgrade of the application currently running on IntegratedWebLogicServer]

  URL - target Http://127.0.0.1:7001 / MyAST/faces/Login

  15:05:23.891 [ExecuteThread [ASSET]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.utils.MySessionListener DEBUG - # present Session created: xP0oqsMzARHojfj6kJ-MJGW53jzYWYI2swzTPA_zyG6yHi30HJZb! 1821648284! 1439496323891 on Thu Aug 13 15:05:23 CDT 2015

  < org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl > < ViewHandlerImpl > < _checkTimestamp > < TIMESTAMP_CHECKING_ENABLED_SHOULDNOT_IN_PRODUCTION >

  < org.apache.myfaces.trinidadinternal.skin.SkinStyleSheetParserUtils > < SkinStyleSheetParserUtils > < _createStyleNode > < ALIAS_DEFINITION_NOT_STARTING_WITH_DOT >

  < 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,456 during the inactive configured timeout of 5 seconds. >

  < 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,460 during the inactive configured timeout of 5 seconds. >

  < 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,459 during the inactive configured timeout of 5 seconds. >

  < 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,457 during the inactive configured timeout of 5 seconds. >

  < 13 August 2015 3:05:28 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,458 during the inactive configured timeout of 5 seconds. >

  < oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl > < DiagnosticsDataExtractorImpl > < createADRIncident > < incident created 317 to key problem "DFW-99998 [java.lang.ClassNotFoundException] [oracle.jbo.pool.ResourcePoolMonitor.setLoader] [myAst12cUpgrade]" >

  e-mail matched expression

  15:06:17.305 [ExecuteThread [ASSET]: '5' for queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.beans.LoginBean DEBUG [email protected]

  CustomAuthenticatorProviderV2.getConfiguration

  CustomAuthenticatorProviderV2.getConfiguration options {}

  Username CustomAuthenticatorHelper.login [email protected] password *

  AstCustomSecurityProviderPlugin within the connection method VER #2, user name:[email protected] | newPwdEncryptFlg #N

  loginSucceeded #true

  CustomAuthenticatorHelper.lookupUserGroups for the [email protected] user

  AstCustomSecurityProviderPlugin getUserRoles for user [email protected]

  < 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,535 during the inactive configured timeout of 5 seconds. >

  < 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,533 during the inactive configured timeout of 5 seconds. >

  < 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,531 during the inactive configured timeout of 5 seconds. >

  < 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,532 during the inactive configured timeout of 5 seconds. >

  < 13 August 2015 3:06:23 PM CDT > < WARNING > < Socket > < BEA-000449 > < close the socket, as no data read on 127.0.0.1:57,534 during the inactive configured timeout of 5 seconds. >

  15:06:26.343 [ExecuteThread [ASSET]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.beans.ResetPassword DEBUG - result = ##Y

  < oracle.adf.view > < TreeRendererUtils > < renderDefaultContextMenu > < context menu child isn't a RichMenu >

  < oracle.adf.view > < CellGatherCallback > < processComponent > < PANEL_GRID_LAYOUT_CELL_CANNOT_STRETCH_MULTIPLE_CHILDREN >

  < oracle.adf.view > < CellGatherCallback > < processComponent > < PANEL_GRID_LAYOUT_CELL_CANNOT_STRETCH_MULTIPLE_CHILDREN >

  < oracle.adf.view > < PanelGridLayoutRenderer > < _encodeAllOrVisitChildrenForEncodingImpl > < PANEL_GRID_LAYOUT_CIRCULAR_HEIGHT_DEFINITION_1 >

  < oracle.adf.view > < PanelGridLayoutRenderer > < _encodeAllOrVisitChildrenForEncodingImpl > < PANEL_GRID_LAYOUT_CIRCULAR_HEIGHT_DEFINITION_2 >

  < oracle.adf.view > < RichRenderer > < decodeUnknownKey > < ATTEMPT_SYNC_UNKNOWN_KEY >

  15:06:37.902 [ExecuteThread [ASSET]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.beans.HomePageBean DEBUG -.

  Here is the call of the navigation pane to create tab of the surroundings.  It is successful.
  

  # HomePageBean.invokeTaskFlow on the inside.  About to fire with Params ActivityLauncher = Title: EDGE TaskFlowID table: /flows/homeTab.xml#homeTab NewTab: true

  # Launcher._launchActivity () activity inside.

  # Declaration of activity Launcher._launchActivity () - try inside

  # Launcher._launchActivity () - newTab = true activity inside.  Call for TabContext...

  < oracle.adf.view > < TreeRendererUtils > < renderDefaultContextMenu > < context menu child isn't a RichMenu >

  < oracle.adf.view > < CellGatherCallback > < processComponent > < PANEL_GRID_LAYOUT_CELL_CANNOT_STRETCH_MULTIPLE_CHILDREN >

  < oracle.adf.view > < CellGatherCallback > < processComponent > < PANEL_GRID_LAYOUT_CELL_CANNOT_STRETCH_MULTIPLE_CHILDREN >

  < oracle.adf.view > < PanelGridLayoutRenderer > < _encodeAllOrVisitChildrenForEncodingImpl > < PANEL_GRID_LAYOUT_CIRCULAR_HEIGHT_DEFINITION_1 >

  < oracle.adf.view > < PanelGridLayoutRenderer > < _encodeAllOrVisitChildrenForEncodingImpl > < PANEL_GRID_LAYOUT_CIRCULAR_HEIGHT_DEFINITION_2 >

  < oracle.adf.view > < RichRenderer > < decodeUnknownKey > < ATTEMPT_SYNC_UNKNOWN_KEY >

  15:06:40.949 [ExecuteThread [ASSET]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] c.a.view.beans.HomePageBean DEBUG -.

  
  

  Here's the same call from the local area.  It fails without a throwing an exception.

  # HomePageBean.invokeTaskFlow on the inside.  About to fire with Params ActivityLauncher = Title: EOTM TaskFlowID: /flows/EOTM.xml#EOTM NewTab: true

  # Launcher._launchActivity () activity inside.

  # Declaration of activity Launcher._launchActivity () - try inside

  # Launcher._launchActivity () - newTab = true activity inside.  Call for TabContext...

  
  

  < oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl > < DiagnosticsDataExtractorImpl > < createADRIncident > < incident created 318 to issue key "ADFC-00032 [ADFc]" >

  < oracle.adf.view > < RichExceptionHandler > < _logUnhandledException > < ADF_FACES - 60098:Faces life cycle receives exceptions that are unhandled in phase INVOKE_APPLICATION 5 >

  javax.faces.FacesException: #{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}: //C:/Users/tstrepek/AppData/Roaming/JDeveloper/system12.1.3.0.41.140521.1008/o.j2ee/drs/myAst12cUpgrade/ViewControllerWebApp.war/fragments/homeTab.jsff @25,111 action = "#{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}": java.lang.NullPointerException "

  at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:118)

  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:189)

  at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:281)

  at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:100)

  at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:121)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:170)

  at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:281)

  at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:100)

  at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:125)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at oracle.adf.view.rich.event.ProxyEvent.broadcastWrappedEvent(ProxyEvent.java:72)

  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:124)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:111)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:168)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:510)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:171)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:115)

  at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:794)

  at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:1259)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:1074)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:402)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:280)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:254)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:346)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:105)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:327)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:229)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:202)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:137)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:220)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3436)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3402)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)

  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2285)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2201)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1572)

  to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:255)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)

  Caused by: javax.faces.el.EvaluationException: //C:/Users/tstrepek/AppData/Roaming/JDeveloper/system12.1.3.0.41.140521.1008/o.j2ee/drs/myAst12cUpgrade/ViewControllerWebApp.war/fragments/homeTab.jsff @25,111 action = "#{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}": java.lang.NullPointerException "

  at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)

  at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)

  ... more than 73

  Caused by: java.lang.NullPointerException

  at com.astcorporation.view.beans.ActivityLauncher._launchActivity(ActivityLauncher.java:54)

  at com.astcorporation.view.beans.HomePageBean.invokeTaskFlow(HomePageBean.java:417)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at javax.el.BeanELResolver.invokeMethod(BeanELResolver.java:780)

  at javax.el.BeanELResolver.invoke(BeanELResolver.java:529)

  at javax.el.CompositeELResolver.invoke(CompositeELResolver.java:257)

  at com.sun.el.parser.AstValue.invoke(AstValue.java:248)

  at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:302)

  at com.sun.faces.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:105)

  at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)

  ... more than 74

  < oracle.adf.view > < PartialResponseUtils > < handleError > < ADF_FACES - 60096:Server Exception during the PPR, #1 >

  javax.servlet.ServletException: //C:/Users/tstrepek/AppData/Roaming/JDeveloper/system12.1.3.0.41.140521.1008/o.j2ee/drs/myAst12cUpgrade/ViewControllerWebApp.war/fragments/homeTab.jsff @25,111 action = "#{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}": java.lang.NullPointerException "

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:606)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:280)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:254)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:346)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:105)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:327)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:229)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:202)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:137)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:220)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3436)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3402)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)

  at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2285)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2201)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1572)

  to weblogic.servlet.provider.ContainerSupportProviderImpl$ WlsRequestExecutor.run (ContainerSupportProviderImpl.java:255)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:311)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:263)

  Caused by: javax.faces.el.EvaluationException: //C:/Users/tstrepek/AppData/Roaming/JDeveloper/system12.1.3.0.41.140521.1008/o.j2ee/drs/myAst12cUpgrade/ViewControllerWebApp.war/fragments/homeTab.jsff @25,111 action = "#{homePageBean.invokeTaskFlow ('EOTM', 'EOTM_TASKFLOW')}": java.lang.NullPointerException "

  at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)

  at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)

  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:189)

  at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:281)

  at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:100)

  at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:121)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:170)

  at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:281)

  at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:100)

  at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:125)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at oracle.adf.view.rich.event.ProxyEvent.broadcastWrappedEvent(ProxyEvent.java:72)

  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:124)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:111)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:168)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:510)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:171)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:115)

  at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:794)

  at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:1259)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:1074)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:402)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)

  ... more than 42

  Caused by: java.lang.NullPointerException

  at com.astcorporation.view.beans.ActivityLauncher._launchActivity(ActivityLauncher.java:54)

  at com.astcorporation.view.beans.HomePageBean.invokeTaskFlow(HomePageBean.java:417)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at javax.el.BeanELResolver.invokeMethod(BeanELResolver.java:780)

  at javax.el.BeanELResolver.invoke(BeanELResolver.java:529)

  at javax.el.CompositeELResolver.invoke(CompositeELResolver.java:257)

  at com.sun.el.parser.AstValue.invoke(AstValue.java:248)

  at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:302)

  at com.sun.faces.facelets.el.TagMethodExpression.invoke(TagMethodExpression.java:105)

  at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)

  ... more than 74

  3 mods are needed

  1.) change managed bean to "session."

  2.) implement the following class of activity Launcher

  3.) implement the following methods of the managed bean

  -----------

  ManagedBean

  -----------

  public String invokeTaskFlow (String Title, String taskFlowPropertyName) {}

  String taskflowId = PropertiesLoader.getProp (taskFlowPropertyName);

  AL ActivityLauncher = new ActivityLauncher();

  If (TabContext.getCurrentInstance ()! = null) {}

  setTabContext (TabContext.getCurrentInstance ());

  Al._launchActivity (title, taskflowId, getTabContext(), null, true);

  }

  else {}

  setNewTabContext (getTabContext ());

  Al._launchActivity (title, taskflowId, getNewTabContext(), null, true);

  }

  Returns a null value.

  }

  -----------

  ActivityLauncher._launchActivity

  -----------

  5 arguments: title taskFlow newTab, paramsMap, tabContext

  public void _launchActivity (String title, String taskflowId, boolean newTab, card parametersMap, TabContext tab_context) {}

  If (tab_context! = null) {}

  setTabContext (tab_context);

  }

  try {}

  TabContext currentTabContext = TabContext.getCurrentInstance ();

  If (currentTabContext == null & tab_context! = null) {}

  currentTabContext = getTabContext(); tabContext Set to validate

  If {(newTab)

  currentTabContext.addTab (title, taskflowId, parametersMap);

  } else {}

  currentTabContext.addOrSelectTab (title, taskflowId, parametersMap);

  }

  } else {}

  setTabContext (currentTabContext);

  If {(newTab)

  currentTabContext.addTab (title, taskflowId, parametersMap);

  } else {}

  currentTabContext.addOrSelectTab (title, taskflowId, parametersMap);

  }

  }

  } catch (TabContext.TabOverflowException feet) {}

  System.out.println ("###Exception occurred in launchActivity");

  toe.handleDefault ();

  }

  }

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• Why me disables the user interface click on another button, while it performs a scan?

  Hello

  When I run the user interface and click on a button that is sweeping the voltage for a period of time, I can't press any other button that sits on my Panel, lets say the Abort button that would prevent the action.

  So when I take the data and I realize that I should stop him before he finishes the scan, I can't and it's a really bad drawback.

  How can I improve this problem?

  Thank you

  Hi m.s.taba,

  It seems to me that your code runs the function leave but does not exit the loop you are, then the program stops at the end of the loop.

  To avoid this, you can:

  • use a global variable to the time your long recall and the recall of quit smoking
  • Call ProcessSytemEvents in the loop
  • reminder for the button leave defines the global variable
  • inside the loop, immediately after ProcessSystemEvents, you should test the value of the variable, and if the value you must break out of the loop
  • only after the exit of the loop, you can complete your program

• UIMsg_BreakOnRunTimeError of completely custom user interface management

  I develop a completely custom user interface for TestStand 2012 SP1 operator (without ActiveX / ApplicationMgr etc.;) "I know, I know...).  I'm trying UIMsg_BreakOnRunTimeError to deal appropriately and need advice.

  (1) my first question is what I call DisplayRunTimeErrorDialogEx() with the appropriate SequenceContext, but the dialog box disables many of the options. Under manage common error, recovery, ignore and abandon immediately (without cleaning) are grayed out (disabled) as well as the box jump of. With the same sequence SequenceEditor and the po sample UI display correctly this dialog box.  Any ideas on what is the cause?

  

  (2) Secondly, the best way to manage the selections to the user?  dontShowAgainForExecution, dontShowAgainForBatchand suspendExecution seem quite simple documentation.  i.e.

  If (dontShowAgainForExecution)
  
      execution. RTEOptionForThisExecution = RTEOptions.RTEOption_Continue;
  
  If (dontShowAgainForBatch)
  
      thread. SetBatchRTEOption (RTEOptions.RTEOption_Continue);
  If (suspendExecution is false)
  
      execution. RESUME(); Fix? Execution seems already paused. What to do if this value is true?

  Now what about the runTimeErrorAction?  I guess for RTEOption_Abort the word execution of . Abort().  What are the appropriate steps to RTEOption_Continue, RTEOption_Ignore, RTEOption_Retry, & RTEOption_ShowDialog?

  (3) Finally, once the dialog box is closed, my execution ends with the result success rather than error state.  What happens here?

  Your help is appreciated as always,

  -Terrence Jones

  (1) this is probably the user privileges, you may either not connected with user at all or the user has privileges to debug. If you do not use the users, you can disable the privilege check in the options of the station.

  (2) something like this:

  void ApplyRTESetting (TS:equenceContextPtr sequenceContext, TS::RTEOptions rteOption, bool breakExecution)
  {
  Thread TS::ThreadPtr = sequenceContext-> thread;
  Execution TS::ExecutionPtr = sequenceContext-> run;

  Switch (rteOption)
  {
  case TS::RTEOption_ShowDialog:
  case TS::RTEOption_Continue:
  case TS::RTEOption_Abort:
  wire-> ClearTemporaryBreakpoint();
  break;
  by default:
  break;
  }
      
  do action according to the selected option
  Switch (rteOption)
  {
  case TS::RTEOption_Retry:
  sequenceContext-> NextStepIndex is sequenceContext-> StepIndex;.
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Continue:
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Ignore:
  wire-> ClearCurrentRTE();
  If (! breakExecution)
  execution-> Resume();
  break;
  case TS::RTEOption_Abort:
  execution-> Abort();
  break;
  }
  }

  Also for the two other parameters we generally use the rteoption of the dialog rather than continue to hardcode, but you can do this job, how you want if you prefer different behavior:

  Example:

  If (dontShowAgainForExecution)
  context-> run-> RTEOptionForThisExecution = rteOption;
          
  If (dontShowAgainForBatch)
  context-> thread-> SetBatchRTEOption (rteOption);

  (3) maybe you call ClearCurrentRTE() to ignore alternatives.

  Hope this helps,

  -Doug

• Your comments on my cRIOs with user interface architecture

  I'm designing a system to measure different signals. I use at least 3 cRIOs 9074 to acquire data and optionally a temperature control. I am required to create a user interface for all 3 cRIOs, even when they control the various processes. In addition, I need to use a Yokogawa data acquisition system as an extension of the cRIO channels. That's what I expect:

  -Have 3 cRIOs, acquisition of data at a high sampling rate.

  -Have the cRIOs sends the data over the network using the network shared FIFO variables.

  -Ask the user to interface on a PC grabing than the 3 cRIOS data over the network and present it to the user, allowing it to send commands to the cRIOs via shared network network variables.

  -Have the PC running the user interface handle all data logging and reporting.

  -Program a cRIO to interface with the DAQ Yokogawa directly and have the cRIO data on the network, just as he did for other data.

  I would appreciate any thoughts on this topic.

  Thank you

  It depends on your sampling rate. Usually with samples of thermocouple you would sample relatively slowly, so you can use the analysis engine to take samples from FPGA would be an exaggeration. If you do not need much greater sampling rate, then you can use the FPGA. Here are a few points of reference for the Scan Interface Mode.

• The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Restart

  I created a ghost of a 32-bit 2003 server image and tried to restore the image on the same server of model\type. I got an error message with the following.

  The user interface of logon C:\windwos\system32\msgina.dll DLL could not load or restart the original DLL. Turn it back on.

  Tried to fix the server with the operating system and can not find the disk driver. I found the driver load it on a floppy disk, f6 entry, insert the diskette. I have a message with the following text.

  Type EXIT to exit the consul of recovery and restart the computer.

  1 C:\Windows

  which windows installation would you like to log on

  (to cancel, press enter)?

  Hi MichelZelensky,

  The question you posted would be better suited in the Windows Server Forums. I would recommend posting your query in the TechNet Forums (Windows Server).

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• User Interface failure

  My Acer Aspire One is running Windows XP Home Edition.  The error message is titled "Failure of User Interface" and the message "The Logon User Interface Dllmsgina.dll failed to load.  I tried to restart with "last known good configuration" and it does not work.  Help, please!

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  I hope this helps.  Good luck.

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creating an application without a head without a user interface

  I use the NDK for about 2 weeks now and I can't seem to find any resource on the following blackberry Web site.

  I am creating an application without a head that would run every 24 hours on my blackberry.  I have the app created with Momentics headless and it does what I need it to do. But right now I need to have a button in a user interface to call him.

  What I'm trying to do is,

  1. Have created enforcement wihtout the need of a user interface for packing it or deployment using our company BES.

  If you can point me to a tutorial or an example that would be great.  Of course if you have a response to these two that is too !

  Thank you

  Lothus.

  Watch the timer shutter release for app without head, code snippets and explanations can be found here:
  https://developer.BlackBerry.com/native/documentation/device_platform/headless_apps/triggers.html#TI...

  If you need a more complete example, I can create one, but I don't know when I'll have the time to do it, he could be close to mid-January. But honestly, all the necessary code is already in the docs.

  Don't forget to register action TIMER_FIRED in your bar - descriptor.xml under your app without a head part, I think it is also covered in the docs.

• Number of user interface

  Hi all! I'm developing an application where there is a bar on top, it has a few buttons and must always be present in all screens.

  I develop my user interface entirely in the PRC, is there something like a custom control that I can use RPC?

  Yep, sounds to me like the OP is perhaps trying to reproduce the provision of an Android version of their Putting buttons approx. above as this is a violation of user BB10 interface instructions and is strongly discouraged. If nothing else, it would make the application built for BlackBerry certification from the outset.

  PBernhardt wrote:

  Why do you think these buttons on the top? In general, the buttons in BlackBerry should be in action on the bottom bar, to make it easy to do what they gave.

• Problem with the receiver of messages in Backgroundlisterner Application user interface Thread

  Hi all

  I have a UI application with earpiece in the background with MessageListener interface and I'm regestering it to receive Notification of incoming text Messages on a particular port.

  But the notifyIncomingMessage() is never called and sms always comes in the Inbox.

  If using port 8855, and

  _mc = (MessageConnection)Connector.open("sms://:8855");
  _mc.setMessageListener (this);

  Detail of my code.

  I have one user interface application with the other point of entry, in the background I register mylistener, so he notifys me message inbound, and then I can launch my application with user interface.

  Code:

  My Application user interface.

  public static void main(String[] args)
      {
  
          if(args != null && args.length > 0 && args[0].endsWith("gui"))
          {
  
              MyUiApplication mb = new MyUiApplication();
              mb.enterEventDispatcher();
          }
          else
          {
              //Entered through the alternate application entry point
                  BackgroundListener.waitForSingleton();
          }
  
      }
  

  And my bottom Lisnter looks to...

  public class BackgroundListener implements PIMListListener, javax.wireless.messaging.MessageListener
  
  public BackgroundListener()
      {
          try
          {
              System.out.println("Adding the Message Listner");
              //Implementing the Message Listner:
              _mc = (MessageConnection)Connector.open("sms://:8855");
              _mc.setMessageListener(this);
  
          }
          catch(Exception e)
          {
          }
      }
  
  public void notifyIncomingMessage(MessageConnection conn)
      {
          System.out.println("BBBBBBB Received the SMS,Read Message Thread Start BBBBBBBBBB");
          Logger.log(DEBUG, "BBBBBBB Received the SMS,Read Message Thread Start BBBBBBBBBB");
          //startMessageReadThread();
  
          new Thread()
          {
              MessageConnection connection;
              Thread set (MessageConnection con)
              {
                  this.connection = con;
                  return (this);
              }
              public void run()
              {
                  try
                  {
                      Message m = connection.receive();
                      String msg = null;
  
                      if (m instanceof TextMessage)
                      {
                          TextMessage tm = (TextMessage)m ;
                          msg =tm.getPayloadText();
                      }
                      if (msg.equals(CBConstants.SMS_CMD_SYNC))
                      {
  
                      }
                      //if ()
                  }catch(Exception error)
                  {
                      System.out.println(error.getMessage());
                  }
              }
          }.set(conn).start();
  
      }
  
  public static BackgroundListener waitForSingleton()
      {
          //Ensure this is a singleton instance.
          //Open RuntimeStore and obtain the reference of BackgroundListener
          Logger.log(DEBUG, "In the Listener class");
          RuntimeStore store = RuntimeStore.getRuntimeStore();
          Object obj = store.get(RTSID_LISTENER_ID);
  
          //If obj is null, there is no current reference to BackgroundListener
          //Start a new instance of BackgroundLIstener if one is not running
          if(obj == null)
          {
              Logger.log(DEBUG, "In the Listener class obj is null so newBackgroundlistener");
              store.put(RTSID_LISTENER_ID, new BackgroundListener());
              return (BackgroundListener)store.get(RTSID_LISTENER_ID);
          }
          else
          {
              Logger.log(DEBUG, "In the Listener class, already a instance so will return the obj");
              return(BackgroundListener)obj;
          }
      }
  

  Can someone please suggest me where I am doing wrong.

  I also saw all the methods for sms listening, with the datagram and messagelistener.

  As this will be contineously run in the background, I thought about MessageListener.

  Any help appreciated.

  Thank you

  Anne Laure

  I received the demand for labour,

  I changed the port to '0', although it is in the Inbox. But now its okay for me, because the unit does not receive it IDE oucederomsurlesecondport 8855.

  Thank you

  Anne Laure