several routers (wired) on the same network subnet error.

Similar Questions

• Connect 2 routers on the same network? !!

  Hello

  I can't get this to work...

  I have a modem connected to the ground floor for internet cable.

  I needed an extra blanket so I bought a linksys wrt120n to put on the floor.

  It is connected directly to the modem downstairs via ethernet.

  However I can't get them on the same network (or my clients at least)

  I gave the same SSID and tried various things, but when it is connected to the linksys, sometimes I don't see the pc down and sometimes I can't! ???

  Please, can someone give clear and easy to follow steps on how to get everything on the same network?

  Thank you...

  Here's how to connect several routers in your network. You need a LAN - LAN configuration so check all the computers together. If you use Internet-LAN, the network from the router won't be available outside of the unit.

• several versions of the Variables shared on the same network

  I have 2 separate reactors working on the same network each variable deployment shared ~ 50 (different names on each process) contacting LV 8.5RT running on hardware of the FP.  One of the reactors is asked for new features and upgrade.  It is possible the Heve 2 different shared variable engine (8.5 and 2010) and the versions on the same network, and the client computer, or I'm in trouble.

  Oh boy I think you ask in trouble here!

• Several ESX 3.5 farms on the same network

  I'm in transition my system to a domain with a battery of ESX 3.5 servers current (EMC SAN attached). I have a similar setup... are there problems I need to be concerned with two farms ESX on the same network?

  N ° other than the obvious (do not use IP addresses for example). Your current virtual Center managing the cluster that moves and the existing cluster?

• Two Macs can connect to a URL, another on the same network may not

  So far, I can connect this behavior to a unique URL only - but of course, it's an I need to get in order to save some software on this particular machine.

  I emptied the cache, flushed the DNS cache and checked that I use valid DNS servers. It isn't Safari, chrome this brings. Two Macs reached the URL without any problem, but this new model Mac Pro simply will not reach it and traceroute expires after a few jumps. All three machines are on the same network, all three use the same DNS servers. I rebooted several times.

  All three Mac running the latest El Capitan. The two reach the URL are a MacBook Pro and a Mac Mini Server.

  I'm puzzled.

  Please note that a traceroute on all three machines reveals the slowdown even at the same jump in the chain, but only the Mac Pro seems to have trouble with it.

• The Switch configuration and Wi - fi router in the same network

  Hi team,

  I have here is the configuration currently as below in the image. To describe the same internet cable is connected to a Cisco switch, which is connected to the PC in LAN (wired). A switch output is connected to the entrance of the wireless router Netgear Nighthawk AC 1900 Smart model of WiFi router # R6900. Wireless devices (laptop) are connected by the router.

  Each device has internet access. However, I am unable to run software LAN or unable to share any file of devices connected to the switch to the connected wireless devices. I can't ping any device the device wireless wired.

  Can anyone suggest what are the settings that I should do or what are the steps I should follow that will make wireless and wired devices in the same network.

  PS Plus early I tried the internet connection to the wireless router and then out of the router to pass, which has solved this problem. But slowing down my internet speed in wired devices. So, is it possible to have all devices in the network even with the current configuration?

  

  Thanks in advance.

  Best,

  Hardik

  I made wi - fi router reset hardware and configured in Access Point mode, that solved my problem.

• 2605dn will not print from a computer, but another computer on the same network print very well.

  The two machines running Win 7 64 bit, both on the same network (such as a printer) all with cable connection to the local network. A single machine prints fine, but since a few days, my PC will not be printed on the printer. PING and TRACERT it is correct, and I tried removing/reinstalling the printer several times. Using the PCL6 driver, as well as a specific driver for printer have same results.  Anyone else having this problem?

  After almost 12 hours of continuous hair-pulling, finally ran across the solution on a Microsoft forum site: it turns out that the problem was a recent update of anti-virus software (McAfee, specifically) who changed the firewall settings.  Can't seem to get the AV software allow constantly to the printer, but temporarily disable the firewall in the AV software has solved the problem.  (the other machine running another AV software package)  I have to just be careful during this 15 minute period.

  Anyway, if you have a similar problem, make sure to check the firewall settings.

• How can I register several OCX files at the same time

  How can I register several OCX files at the same time. OCX depending on the application files are stored in a network location, IE. R:\HR\whatever\whatever\*. OCX instead of manually record each ocx file, I would be with a simple batch file or an automated script. Anyone have any good ideas?

  Hi James,

  The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in following the link MSDN forum

  http://social.msdn.Microsoft.com/forums/en-us/categories

• BEFSR81 with WRT54GS to the same network?

  I currently have a LinkSys BEFSR81 connected to a cable modem that I need at least 6 ports wired to my home network.  I also have a WRT54GS which is currently unused, but I want to add to the network so I can have both wireless connectivity.

  Assuming that it is possible, what is the best way to combine the two units in the same network?  The simply connectable WRT54GS downstream of the BEFSR81 via one of the ports open?  I guess I'll have to change the IP address of the wireless device for individually accessible for configuration, check status, etc.  All the other things I have to do?

  Please notify / thank you!

  I found the solution in a previous post, sort of.  Here's what worked for me:

  (1) connect direct PC to WRT54GS

  (2) turn off DHCP and change the WRT54GS IP to 192.168.1.2 (192.168.1.1 for the 'master' BEFSR81 vs).

  (3) save changes

  4) activate wireless, configure security, get access, etc. on the WRT54GS code

  (5) save changes

  (6) re - connect the PC to the original port BEFSR81

  (7) connect the ethernet on BEFSR81 port to a port ethernet on the WRT54GS (NOT the Internet port)

  (8) to enter the code in the WiFi device and make the connection...

• Installation of Oracle 11 g on a client in the same network as another implementation may cause problems?

  Hi, I have a system running Oracle 11 g r2 running.  Same network, another subnet.  I want to install 11 GR 2 for dev/test on another computer not connected somehow to the other system, they are on the same network (different subnet).

  Is that all that happens on the network that something can screw up?  I don't want to interfere with my existing implementation in production.

  Nothing will happen on its own. If you want to be safe, remove entries from your tnsnames.ora file production databases.

• Configure DHCP (get guest and host on the same network)

  First of all, I want to thank everyone for all the help that has given me so far.  I apologize that I'm such a newbie to virtualization, but I learn fast!

  I'll have set up a printer (HP OfficeJet J4860) wireless.  Here is my configuration:

  Computer: Dell computer Inspiron 1318 laptop

  VMPlayer Version: 3.0.0 build-203739

  Host o/s: Fedora 12 Linux 64-bit (2.6.31.12 kernel - 174.2.3.fc12.x86_64)

  Comments o/s: Windows 7 Home Premium

  Guest network settings: NAT (using DHCP)

  The problem I have is that the configuration of HP printer utility complains that the IP address of the printer (192.168.0.102) is not on the same network as the client (172.16.79.1).  So, in order to install the printer, I need to configure the VMware DHCP server to use IP addresses in the range 192.168.0. *.  I tried manually editing /etc/vmware/vmnet1/dhcpd/dhcpd.conf and /etc/vmware/vmnet8/dhcpd/dhcpd.conf (Yes, I know, the files that you are not supposed to change these, but I tried anyway).  Who broke everything (guest couldn't access anything whatsoever!), so I put the original files of dhcpd.conf.  I also tried to change the settings of the VM guest network to bridged and assigned a static IP to the map in Win7, but that does not work either.  (I did not try to use the Host parameter only because I don't have any idea what this means?)

  Could someone guide me please you through the configuration process of the range of IP addresses to the DHCP server on VM or manually assign IP addresses bridged network or host-only?  I have attached copies of my config output files and the vmnet1 and vmnet8 ifconfig in the case where it is useful.

  Thank you, in advance, for any help.

  Best regards, Chris

  P.S. If this question has already been answered, I'm sorry for the redundancy.  I'm looking through the forum, but I am come with has been set to the "NAT" VM network and map comments to "Using DHCP".  So, if this has been answered before, please point me to the thread.

  According to the ifconfig_output.txt IP address of the host is 10.41.1.111, and you say the IP address of the HP printer is 192.168.0.102 if the host cannot yet access the printer on this subnet so neither will be the guest who is on the 172.16.79.x subnet.

  How the host receives its IP address?

  Is there a router in the game?

  If so you can assign the guest Bridged to so it will then get an IP address from the router and then the host and the guest will be put on the same subnet and then you configure the HP printer to have an IP address that is on the same subnet but make it a static address that is outside the scope of the Pool of addresses IP DHCP servers as it better to have the printer to use a static address and not a single one in the range that would be affected through DHCP.

• Two VLANs in the same network bubble?

  Hi all!

  I do not know very well of networking, and don't know my VMware network guy, so I hope that someone here might be able to answer my question. Thank you!

  I'm testing the conversion of some of our production servers. Since they have the same name, they are all in a bubble of network on the same host. So I have a vSwitch called "Bubble Network Test" which has several virtual machines, but who doesn't have an uplink (no associated physical map). So far, this has worked very well. So that users to test, I also have two XP machines to also live in this bubble. However, we will have performance issues. In our test of D/R one a few months ago, we found that the application performed very bad when the customer was in the same VLAN as the server; change the client to a VLAN different fixed performance.

  So, I would do it here in the hope that it will improve performance. However, I do not know how to do it. Can anyone offer any tips/advice on how to have more than one VLAN in the same network bubble? I have to make two vSwitches and then connect them somehow?

  Thank you!

  As long as you stay internal to the ESX Server then Yes you will need virtual switches - you will have then a virtual machine that will span two switches, acting as a router routing traffic between VLANS.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• MBA on the same network arrested in connection and iMac

  I got an iMac and MBA on the same network more than 5 years. Today, he ceased to recognize each other. The MBA, the iMac is listed in the Finder window, but when I click it, window is empty and I have no Conneded. I click on connect as, again and again, and nothing happens. On the iMac, the Finder window list also the MBA and unrelated. Connect as > enter the name and the password. I copied the name of iMac on name and entered the password (even, 10 years), and I get a stirring display.

  That is what it is? Thank you

  Hello ArmandoWyo,

  Thank you for using communities Support from Apple. I know have a problem using your computers Mac 2 together, it's not what you expect. These computers have worked together on the network before, good news as this should be as easy as some basic troubleshooting or setting up sharing on the network again. The following articles will help to solve your problem:

  OS X El Capitan: connect to shared computers and servers for files on a network

  OS X El Capitan: If you do not find the computer you want to connect to

  See you soon!

• I need a few files to restore from a time machine backup to a different MacBook Pro that is connected to the same network

  Hi, I recently "lost" my MacBook Pro because of water damage.  Fortunately, I've been using time Machine\Capsule and I have a MacBook Pro that is connected to the same network/device.  I need to restore a few files in the backup TM of the computer 'lost' on computer 'work '.  I was able to 'Browse' the other TM backup (click the icon TM plus the button 'Alt').  The Web browsing is extremely slow (took about an hour to break down / find the file on the network).  However, I tried to copy the file and I get errors of the alias.   Please advise me on what I am doing wrong.

  Thank you

  ggnpeter

  PS My OS is 10.9.5

  Visit Time Machine FAQ of Pondini helps with Time Machine.

• Can I use a Gen 4 and Gen 3 ATV on the same network?

  Can I use a Gen 4 and Gen 3 ATV on the same network?

  Yes.