Several Signatures and text editing

Similar Questions

• Change the size of the font, lines and text editing

  Hello

  Am new suite adobe, but with some problems to adapt very well.

  Could someone help me please with a manual step by step how I can change the size of the font, line thickness and editing text in adobe illustrator.

  Your help is quite appresiated.

  Paul,

  Some tips that can be difficult to find through the help:

  Type:

  When you want to change the overall size of the Type (text), make sure you only select the integer object; You can do it with the selection tool (Direct) (one of the arrows).

  When you want to change the size of the specific characters/parties of Type, make sure that you select (only) the relevant part with the text tool (T).

  If you do the opposite, you'll regret.

  Weight of the race:

  That's what you call in the op line weight.  It's in the stroke palette/Panel.

  
  

  Both:

  You can use the menu drop-down and select the values or insert; both have pt for points as a default value, but you can use other units by adding their abbreviation (mm for mm, cm, cm, inches, px for pixel (which is basically the same as pt), and you don't want to know about picas.)

  If you need or want to, you can also change the units generally, edit > Preferences > units & Undo; any change persists until changed again, through documents.

• Outlook 2007 not responding - usually happens when creating an email and text editing

  Run the sp2 of Vista with MS Outlook 2007 (12.0.6504.5000) SP2 MSO (12.0.6425.1000).  Sporadic term problem that has become almost repeatable long and that occur so often it is largely to prevent creation of emails.  Problem seems to be reproducible when the use of deleting characters in a partially typed message causing Outlook to freeze and brings up the topic not responding.  You can let Outlook and wait, but invariably you must close Outlook either right-click in the window and selecting close or using ctrl alt del and selecting Start Manager tasks then close Outlook which is presented as does not not in the Task Manager.  Tried to move the .pst, compression, the removal of component files including windows search snap.  According to technical forums there are a lot of problems of this kind (not responding) but it's hard to find anything on Microsft site that provides all the answers.  Any help is appreciated as I am currently having to consider rusing another e-mail program.  My other computer uses XP and Outlook 2002 and it works very well!

  Hello havenst & SteveAnston,.

  Thank you for your response back!

  For the best support with Microsoft Outlook and all it's versions I suggest you go to the link below.  From the link, you can scroll down and select communities to post a question and looking for answers.  Good luck!

  Help for Outlook 2007:
  http://Office.Microsoft.com/en-us/Outlook/FX100647191033.aspx
  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot save styles with Text Edit ver 1.10

  I read the book Missing Manual and also help online Text Edit topics, but I can't do styles work for me in editing text.

  When I click on the Styles button on the rule and select 'Show Styles' nothing happens. Same thing under Format > police > Styles menu. I have no way to save or set a style.

  Any ideas?

  I use a Mac Book Pro with Yosemite and Text Edit 1.10.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.TextEdit

  A right click or Ctrl-click on the line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Quit the application runs. Move selected item to the trash. Restart the application and test.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• Signatures - cannot have .jpg and text; Why not?

  I just downloaded 38.0.1

  Please don't tell me this - it does not solve my problem. https://support.Mozilla.org/en-us/KB/signatures

  I want this: http://www.freisco.com/zig2015.htm
  I created the file using FrontPage2000 as a html editor and posted online. Files and photos are in the same directory on my laptop. Files and photos also reside in the same directory on Freisco.com.

  After passing through ACCOUNT - TOOLS SETTINGS options Signature text (using html) and attach the signature of a file options; the results of best (and only) I realize is a box/photos with no photo with desired 4 lines of text under. I'm particularly angry at the "file attachment" I can specify the path to C:\ and he is not taking the photo. and when I try to use the http://www. path, it does not work either? More specifically, when I specify the path of http://www.freisco.com/zig2015.htm TOOLS to close then reopen the tools accounts settings; the http data are gone and the most recent C. ------is in its place. Frankly, I do not why - but it is just an issue.

  Whereas that, no matter which option I choose; the html editor (with the contents of zig2015.htm glued directly on the box) or a file attachment. It seems that I can not just to nail a picture of me in the signature; but it always captures the 4 lines of text.

  What I am doing wrong? An email would be very welcome at [email protected].

  Thank you.

  Thanks for all the criticism of what I should use vs that I shouldn't use although I didn't ask for a little of that. Rather than trying to show that you know everything about Web pages, html editors, the photo, bloat, sizes of signature and similar articles; Why don't focus you on just trying to help someone solve their problem?
  I continued to search the forums for an answer, and believe it or not, you had offered a couple of months.

  Here is the solution. Tools-Account Settings: remove all the signature options, uncheck all the boxes and all paths of code and files. Close tools.

  Go to 'write' and open a new email for the construction, which will be completely blank. Write lines of text in the desired signature. Go to the INSERT picture menu and select the photo of your choice. Be sure to include an alternative text. Click OK.

  Then select FILE-SAVE AS - and save them in a file; not a model or a project.

  Then, go to TOOLS - ACCOUNT SETTINGS, select "Attach a file signature" box and will find the file you have just to register and use this file. Click OK.

  Problem solved!

  It is a direct solution, without judgment, to my problem. When I need ADVICE I'll ask for it; When I ask explicitly for a SOLUTION, this is what I want.

• Text editable and readable after scanning...

  Hello

  Found the site for "HP Deskjet full feature software and drivers" for my 3050 all-in-in-one, had problems downloading and not all downloaded successfully... Uninstall and try again... smile... the question I have is with the scanning of text... will I need to download other software OCR in addition to software clearly mentioned in order to scan a text editable and readable? any help would be appreciated...

  Larry Wöller

  Hello

  Printers only more expensive software on the CD or download the software itself because can be expensive. Please try the following free software;

  http://www.MakeUseOf.com/tag/top-5-free-OCR-software-tools-to-convert-your-images-into-text-NB/

  Kind regards.

• field label and text field editing in vertical field Manager

  Hi, am new to the blackberry development. Developing an application in which I placed the field label and modify the field in the Manger of two vertical field and place them in a horizontal field Manager, but when run the present I don't see the label text field I see am doin BB 4.7, following is my code

  LabelField name = new LabelField ("first name :")
  {
  public void paint (Graphics g)
  {
  Super.Paint (g);
  g.setColor (Color.BLACK);
  Do police = this.getFont (.derive(Font.DROP_SHADOW_RIGHT_EFFECT |)) Font.ENGRAVED_EFFECT, h);
  this.setFont (do);
  }
  };
   
  FirstName = new EditField ("Name", "", 25, EditField.FILTER_DEFAULT |) FIELD_RIGHT) {}
  {} public void paint (Graphics g)
  getManager () .invalidate ();
  Do police = this.getFont () .derive (Font.DROP_SHADOW_RIGHT_EFFECT |) Font.ENGRAVED_EFFECT, h);
  this.setFont (do);
  g.drawRect (6, 0, (int) (Display.getWidth()/1.8), getHeight());
  Super.Paint (g);
  }
  };
  HorizontalFieldManager hrMgr = new HorizontalFieldManager();
  final VerticalFieldManager vfMgr2 = new VerticalFieldManager();
  VerticalFieldManager vfMgr1 = new VerticalFieldManager()
  {
  protected void sublayout (int width, int height)
  {
  int w = (int) (Display.getWidth () - vfMgr2.getPreferredWidth () - 20);
  Field field;
  int fieldCount;
  int x = 0;
  int y = 0;

  fieldCount = getFieldCount();
  int d = (int) ((Display.getWidth()/4.5));
  for (int i = 0; i)< fieldcount;="">
  {
  field = getField (i);
  setPositionChild (field, x, y);
  layoutChild (field, w, height);
  y += field.getContentHeight ();
  }
  setExtent (d, a);
  }
  };
  vfMgr1.add (Name);
  vfMgr2.add (FirstName);
  hrMgr.add (vfMgr1);
  hrMgr.add (vfMgr2);
  Add (hrMgr);

  The same a s job well if put a choice field of object instead of text edit field is I see the field and choice of subject field in a single line, but is not in the case of text editing field, please help me on this point, Thanhs beforehand.

  Thanks for your valuable reply Mr.simon,

  But I have reached my goal by adjusting the width of vertical field nursery and got a solution... These are the changes I made in my sublayout...

  protected void sublayout (int width, int height)
  {
                  int w = (int) (Display.getWidth()/1.3);
  Field field;
  int fieldCount;
  int x = 10;
  int y = 0;

  fieldCount = getFieldCount();
                int d = (int) ((Display.getWidth () / 3));
  for (int i = 0; i)< fieldcount;="">
  {
  field = getField (i);
  setPositionChild (field, x, y);
  layoutChild (field, w, height);
  y += field.getContentHeight ();
  }
  setExtent (d, a);
  }
  };

• I think I bought the wrong to adobe. I was hoping to edit PDFS and make arrangements for the signature and I get to do it with my current plan. Can I ask to sign up for the correct adobe?  I don't know what the creative cloud is all about

  I think I bought the wrong to adobe. I was hoping to edit PDFS and make arrangements for the signature and I get to do it with my current plan. Can I ask to sign up for the correct adobe?  I don't know what the creative cloud is all about

  Look at desktop applications Adobe Creative Cloud | Adobe Creative Cloud to see what is in the cloud and click on the names to find out what each

  Acrobat is what you use to create and edit a PDF file

  If that's all you want to do, you cancel your current subscription and then buy the correct subscription

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I'm trying to sign several documents and I have my saved signature under "fill &amp; sign" the organization that generated the forms highlighted the signature lines and when I try to put my signature, it is pushed outside the signature.

  I'm trying to sign several documents and I have my saved signature under "fill & sign" the organization that generated the forms highlighted the signature lines and when I try to put my signature, it is pushed outside the signature.

  Hi katepell,

  You can simply drag the signature to the desired place by holding it with the mouse.

  Thank you

  Abhishek

• I need to create a PDf form with specific editable fields, including the ability to insert an electronic signature and to be able to save the completed form. What version of adobe supports this?

  I need to create a PDF form with specific editable fields, including the ability to insert an electronic signature and to be able to save the completed form. What version of adobe supports this?

  subscription dc Acrobat or purchase, Plans and prices | Adobe Acrobat DC

• I have acrobat 9 pro and I do not see the text edit tool, or in any case to change the spelling of the words, I have version 9.0.0

  I have acrobat 9 pro and I see no way to change the spelling of the text.  I know the search for instructions to do this it is assumed to be a right pane, but I have no right pane and I don't see how to get one to appear.  Thanks for any help.

  In Acrobat 9 the tool is called the "Text editor" tool It is included in the "Advanced editing" toolbar, so just with the right button of the toolbar area and select it from the list of available tools. Or you can select: Tools > advanced editing > text editing tool

• Synchronized text and client edition with Muse

  I put us text synchronized between the Desktop version and the version of the iPad.  That works very well since within the Muse.  When my client is in the site in the edition browser, they cannot change the synchronized text.  What can I do to make text editable by my clients to Sync?  I have the latest version of Muse.

  Kevin

  By default this feature is always if you publish to Adobe Business Catalyst. If you download to your own accommodation, this feature is enabled by default but can be disabled in the Site Properties. If you're uploading to non Adobe of accommodation that you want to check "Activate for synchronized text" is correctly defined.

  

  If it still does not respond, is - it possible that a transparent object is above any point your client wishes to change? This would prevent mouse clicks to achieve the editable element.

  What is the URL of a page that shows the problem, and what specific text on the page illustrates the problem?

• My client wants ot edit photos and text on its Web site. the site will not be hosted by BusinessCatalyst. Is it possible, and it is possible for me to synchronize the changes with my data?

  My client wants ot edit photos and text on its Web site. the site will not be hosted by BusinessCatalyst. Is it possible, and it is possible for me to synchronize the changes with my data?

  Hello

  Update June 2014 to Muse allows In-Browser editing for Muse sites hosted with third-party providers (not Adobe).

  See https://helpx.adobe.com/muse/using/whats-new.html#In-browser%20Editing%20enhancements for more details.

  Abhishek

• When you have several layers, move pictures and text from background layer

  Greetings

  I have an image that has about 24 layers, many of them are text.  When you try to move the images and text on the same layer yesterday, I ran into problems, but finally fixed by moving these elements from the bottom layer, using Ctrl\Move.

  It worked well so I thought I'd show my fellow learners at our regular session of Friday on 11 items to SeniorNet.  However when I went to show them I could move easily and freely on the background layer - without using Ctrl, just the move tool.  Elements simply very quickly leave the background layer for the relevant layer with the image or the text (as before?).

  Does not include why I couldn't do that in the first place at home, but I had a lot of testing there.  What circumstances might have been different?

  Jim, in the Interface of PSE11/12 "Auto select Layer" is displayed in the background Tool Options Panel

  

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.