Outlook 2007 not responding - usually happens when creating an email and text editing

Similar Questions

• Is there a solution for outlook 2007 - not finishes indexing - from Microsoft?

  Is there a solution for outlook 2007 not finished indexing of Microsoft?

  Hello Emlyn John Powell, welcome.

  This could be caused by a number of things. I recommend to try this first:

  1. open Outlook
  2. go in (top) tools > Options > Search Options
  3. uncheck the box next to your mailbox name
  4. click 'OK', then 'apply '.
  5. close Outlook completely (restart the computer if you must)
  6. open Outlook and see what happens

  7. then go to tools > Options > menu of Search Options and re - activate Indexing
  8. click 'OK', then 'Apply', and then restart your computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I place the cursor over a link means that there not respond.for ex when I opened my email yahoo, I can't signout in that.when I hover over signout what it na no respond.but in another browser it answer.

  When I place the cursor over a link means that there not respond.for ex when I opened my email yahoo, I can't signout in that.when I hover over signout what it na no respond.but in another browser it answer.

  This problem may be caused by the Yahoo! toolbar as scopes as well down and covers the top of the browser window, allowing links in this part of the screen not clickable.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  You can keep an eye on this thread:

  • [707748/forums/contributors/707748]

• How to fix: Page Template styles do not respond to changes in CSS files in the text editor of 'Developing' Admin Console

  I bought a model site.  It has a css file, /styles/screen.css

  It also has a template page 'home' with the link to the style sheet within the < head > section:

  "< link href="/styles/screen.css "rel ="stylesheet"type =" text/css"media ="screen"> < / link >

  I am tempted to change screen.css, by editing the file in the 'Develop' administration Console and pressing the 'Save' button on the file when changes are made.

  However, the changes do not appear in the preview of the Page template.

  However, if I do a < style > section in the head <>of the page template and put the change, it displays correctly.

  It's like the Page template does not recognize changes to the screen.css.

  I press "Save draft" and "Update" before you press 'Preview' to check for changes.

  My question is how to fix the Page Template styles that do not respond to changes in CSS files in the text editor of 'Developing' administration Console.

  I am a new user of BC and I agree it is likely a result of not knowing how the css BC.

  Thanks in advance for any assistance with my issue!

  Hello

  I think that you too complicate the thinking problem that BC is a non-standard way of processing applications to a css file. This looks more like a cache or perhaps a code problem. However, I would be happy to take a look at your code and see if I can remember where is the problem. Try Skype me and screen-sharing and I'll see what I can do. It is probably fixed quickly :-) My ID:s 'noviumdesign '.

  Anton

• When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."

  When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."   And I also waited for a period of time as well very reasonable.  What can I do?

  original title: EMAILING A PHOTO OF "LIBRARIES/IMAGES".

  Hi BrianS.OR,

  1 are you referring to the client program webmail or email?

  2. what e-mail on the computer client program do you use? Is - this Windows Mail or Windows Live Mail?

  3. What size are the image files?

  4. did you of recent changes on the system?

  You can temporarily disable a security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• When I send an email from Outlook Express, it is sent several times, usually happens when sending electronic mail to the affiliate

  When I send email to the affiliate, it will send several times, fill their Inbox, and then the returned several e-mails to fill my Inbox. I have sent emails of the sample to my personal account, and that works well, except when I attach a pdf file, then it send twice. How can I fix?

  Tools | Accounts | Mail | Properties | Advanced. Uncheck the box: "Break apart messages...". ».
   
  If that does not she, you have corruption of dbx files.
   
  Create a new Outbox and sent items folder.
   
  Follow these steps for the Outbox and sent items after you move the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE.
   
   
   

• BlackBerry sync Outlook 2007 Notes with BlackBerry classic software

  On my old BlackBerry Curve I could synchronize Contacts, calendar and Notes with Outlook. Notes Sync seems not to be an option with the classics.

  Does anyone know if there is a workaround or process in order to obtain the classic notes and keep them in sync with my Windows 7 PC? Thank you.

  Update: I read another post regrding the same question on this forum and solved my problem, but not as I expected. The resolution is to install Evernote on the PC (Win 7) and re - install Evernote on the American (I had removed thinking I would never need it). I use Office 2007 and when I right click a note in Outlook I see an option to export to Evernote 5. I exported all my notes, and instantly they appeared on the BlackBerry.

  Notes are always available in Outloook but synchronization only is in Evernote. At least I have my notes available on the BlackBerry. Everything is good now and I'm still discovering all of the goodies on the new classic.

  Maybe someone knows somrthing I don't have and will answer, my question is what is so classic on a classic, the keyboard?

  Classic quid software to synchronize Notes, anyone can do except BB.

  Look at what this software has said: "our product restores the classic legacy USB come with BlackBerry devices sync feature.

  http://bb10outlooksync.com

• Synchronize Outlook 2007 Notes Smartphones blackBerry for Blackberry

  I have a Blackberry Curve 8530 I synchronize using the Desktop Manager to my calendar, tasks, etc.  I have several Notes in Outlook 2007 and I also want to synchronize.  I spent my sync options and selected I want to synchronize my Notes, but it doesn't seem to work.  I can't find the Notes on my Blackberry where they say it takes and I don't see any errors in my Logs.  How can I get these items to synchronize?

  I got it to work!  The synchronization domain was created to be not quite right.  Once I fixed, it works fine.  Thank you

• Not enough disk space when creating ISO from DVD image

  I use first elements 14.1.  I encountered a very strange problem when you try to create an ISO image DVD, editing content in the available space (space required is 4.35 GB 5.12 Mbps throughput).  I get the message ' not enough space for the engraving', even if the drive I use has more than 1.5 TB of free space!  All files work in Premiere Elements are on this drive.  I cleaned all the relevant elements of the first, work folders before attempting to create the ISO image.

  Here's the weird part... If I try to create an ISO image of a Blu - Ray disc, editing of content space (space required is 18,87 GB to 20.19 Mbps bitrate), I don't get the error message.  I can create the ISO image of Blu - Ray with no problem!

  I tried to reboot several times.  I completely uninstalled EP 14.1, rebooted and reinstalled with the same results.

  Someone at - it ideas?  Has anyone ever encountered this?

  The running time is 1 hour 50 minutes.  I chose "Insert the contents of the available space", just as I did when creating the ISO from Blu - Ray.  PE shows that seeks to create a 4.35 GB file, which should easily fit on a 4.7 GB DVD.  I just tried open the same project on another computer and the same generation of PE, with the same result.

  I think I discovered a bug freak EP Version 14.1 (20151208.daily.895401).  The exact length of the film is 1:50:16:08.  I discovered that if I increase or decrease the duration of the video of just 1 frame, I is no longer the mistake and am able to successfully create a picture ISO of DVD!  Go figure.

  I would be interested to know if anyone else can duplicate this fault!

• The Task Manager does not appear, nothing happens when you select it

  It is very difficult to get help. Now, I'm not sure if this is the right forum and place to be. I need help to get the Task Manager which has disappeared from my computer. I click right on the taskbar, and then click on task manager and nothing appeared. Please advise on how to find him.

  Hi disillusionedvery,

  If you're not, try to login as an administrator and see if that makes a difference.  If so, we still have a problem, but at least we know the Task Manager is here.  If you have any other user accounts on the computer, try connecting them and see if they all have the same problem or if it is limited to one account.  Your profile may be damaged and if this is the case, post back and I will provide procedures about how to fix it.

  Try pressing CTRL-ALT-DEL all at the same time and click Task Manager on the screen that appear and see if it works to access the Task Manager.

  If this does not work, let's try the following:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  If it does not, then thanks for posting error messages in the event viewer on the Task Manager (Start / Control Panel / administrative tools / Event Viewer).  Look in the system section.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  Do you know when this problem started?  If it has been reasonably recent, try a restore of the system to a point in time BEFORE the problem started. If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this does not work, you may be infected with malware.  Update and run a scan complete with any security software you use.  Then, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx.  If you find something, especially something you can't delete, then after return.

  That's enough for now.  One of these procedures will be hopefully resolved or at least identify the problem.  If this isn't the case, please post back with the answers to the above questions, results of the tests and procedures that you did (including copies of errors if any found), your version of Windows (for example, 32-bit Vista Business SP2) and anything else that you think may be useful.  We will then decide where to go was from there, armed with more information and know what and did not work.

  I hope this helps.

  Good luck!

• Error when creating a layer of text, when 2 + work plans are available in the document

  Hi, I met a weird error while trying to create a new text layer.

  When a single work plan is available in the document, the script works well and create a new empty text layer;

  When 2 or more work plans are available in the document, the script generates the layer, but she then gets stuck when trying to convert a text. The console says "the layer cannot contain text.

  Paste my code here with comments.

  #target photoshop
  
  
  //this script attempts to create a text layer above the selected layer contained into an artboard.
  //For some reason, it works on the first available artboard, but not on the other ones. The error is "The layer cannot contain text"
  
  
  //get active PS document
  var doc = activeDocument; 
  
  
  //get active artboard 
  var currentArtboard = getActiveArtboard();  
  
  
  //create new art layer in the current artboard
  var newLayer = currentArtboard.artLayers.add();
  
  
  //trying to convert to text layer. Fails when 2+ artboards are available int the document
  newLayer.name = "test";
  newLayer.kind = LayerKind.TEXT; 
    
    
  function getActiveArtboard() {  
      var key = false;
      var l   = doc.activeLayer;
      var p   = l.parent;
  
  
      try {  
          while (!key) {  
              doc.activeLayer = p;  
              var ref = new ActionReference();  
              ref.putEnumerated(charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt'));  
              key = executeActionGet(ref).getBoolean(stringIDToTypeID("artboardEnabled"));  
              if (key) {  
                  return p  
              }  
              p = p.parent;  
          } 
  
  
      } catch (e) {  
          alert('This layer is not contained within an artboard');  
          return undefined; 
      }  
  }  
  

  
  

  Any help is greatly appreciated. Thank you in advance!

  var doc = activeDocument;
  
  var currentArtboard = getActiveArtboard();
  
  function makeTextLayer() {
      var desc = new ActionDescriptor();
      var desc2 = new ActionDescriptor();
      var ref = new ActionReference();
      ref.putClass(app.charIDToTypeID('TxLr'));
      desc.putReference(app.charIDToTypeID('null'), ref);
      desc2.putString(app.charIDToTypeID('Txt '), "text");
      var list2 = new ActionList();
      desc2.putList(app.charIDToTypeID('Txtt'), list2);
      desc.putObject(app.charIDToTypeID('Usng'), app.charIDToTypeID('TxLr'), desc2);
      executeAction(app.charIDToTypeID('Mk  '), desc, DialogModes.NO);
      return doc.activeLayer
  }
  
  var newLayer = makeTextLayer();
  
  newLayer.move(currentArtboard, ElementPlacement.INSIDE);
  
  function getActiveArtboard() {
      var key = false;
      var l = doc.activeLayer;
      var p = l.parent;
      try {
          while (!key) {
              doc.activeLayer = p;
              var ref = new ActionReference();
              ref.putEnumerated(charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt'));
              key = executeActionGet(ref).getBoolean(stringIDToTypeID("artboardEnabled"));
              if (key) {
                  return p
              }
              p = p.parent;
          }
      } catch (e) {
          alert('This layer is not contained within an artboard');
          return doc
      }
  }
  

• Win 7 not recognizing active IPV6 when creating in homegroup

  Hello

  When I try to create a homegroup, Win 7 recognizes that IPV6 is enabled, even if the ownership of network adapter so that it is checked.  In other words, I keep getting an error message that tells me to enable IPV6, but it is already enabled.

  My Network (Realtek RTL8168c) drivers are up to date and my router (8855 DLink xtreme n duo) firmware is also updated.  I use a 12 GB Windstream DSL modem.

  Any ideas?

  This is a reply to another post that works:

  Here is that same procedure outlined more in detail by one of your customer support representatives:

  1. temporarily disable the firewall and third-party antivirus on the computer for a test.

  2. check that the competent services

  =========================

  a. click "Start", type "services.msc" (without the quotes) in the search bar and press ENTER.

  Note: If you are prompted for an administrator password or a confirmation, type your password, or click on continue.

  b. right click on "Peer Networking Grouping" service and choose Properties.

  c. check if the service is started; If this isn't the case, please click on the Start button and see if it works.

  d. you can also choose automatic next to startup type.

  e. click OK.

  f. Please repeat the above steps with another service: PNRP Machine Name Publication Service.

  3 modify the key to register IPv6 to enable IPV6

  ==========================

  a. Click Start, type regedit in the search bar and then click regedit in the list programs.

  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters

  c. check whether the "DisabledComponents" registry key exists. If so, move on the next steps.

  d. double-click "DisabledComponents" registry key and change the value to 0.

  (If the key does not exist, please create the above key and assign a value of 0)

  e. exit the registry editor and then restart the computer.

  Thank you
  Gloria

• I lost the power 01/25/10, and I lost my express__it outlook is not responding, and that's where my mail is set up

  I lost the power 25/01/10 and I lost outlook express, he says his does not.
  That's where my email is set up

  It is a forum for Microsoft Outlook. Outlook Express is part of Internet Explorer. You will get a response more expertise if you post in the appropriate forum:

  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/threads Kathleen Orland Microsoft Outlook MVP

• HDD USB not recognized as "physical1" when creating the new virtual machine

  Hi all

  I wanted to create a new virtual machine, and I wanted to use my USB as a physical drive.

  But Workstation shows me "physical0" which is of course my drive internal.

  I tried USB pen drives. They are not recognized either.

  This somehow is no longer supported? I would have that it would be possible to use USB external HDD as the physical drive to a new virtual machine.

  you have installed VirtualBox?

  If so, you can try to use the virtuaklbox command line tool to create a descriptor of rawdisk for this disc.

  say diskpart on this drive? -It is "online"?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• I use Microsoft Outlook 2007, Windows XP Pro version 2002, Service Pack 3, and Microsoft Office Word 2007 on a Dell Latitude. I am trying to merge my Outlook Contacts to create mailing labels. My old version of MS was very easy.

  I can't find it.  Any help would be appreciated.   Thank you.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Microsoft Outlook and would be better suited in the Groups of Discussion Outlook. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.