Several steps required for discoverer

Similar Questions

• Steps required for guest access / self-supply accounts

  I'm a little overwhelmed with the information concerning the establishment of users invited on the wireless network and have a few questions I was hoping that the community would respond.

  I use a WISN on the 4.2 version of the software, as well as a WC on the same version.

  1. is it possible to have accounts created by users themselves, once they join the wireless network? If so, what will do to put in place?

  2. a VLAN especially should be created for customers to use?

  For the first question, if you want more that putting an email address for tracking needs, users Fella5 is right.

  To answer the second question, it is unnecessary on the plan technique one VLAN special for guest users. In most cases, however, you should have one to better apply the security settings of your network clients. In our office, with 10 people, we use the same subnet for guests, voice and internal data. However, we use 3 different SSIDS with different policies and security strategies QoS applied to them. And the guest SSID has an ACL applied to limit traffic to the Internet only. When you are given a 27 subnet to use, do you :)

• Dreamweaver CS5 update of the steps required for CS6

  I had to reinstall Dreamweaver on my computer, but still update the CS6. I forgot the link/steps.

  
  

  Could someone guide me please? I have it on another computer, but cannot understand the transfer to the second computer.

  
  

  Thank you.

  Adobe applications must be installed using installation files - they may not be transferred between machines.

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  Find the serial number of your Adobe product quickly

• Several agents required for parallel (= asynchronous) execution of the script?

  Hi all
  
  We know how to simultaneously run multiple packages using scenarios and asynchronous execution mode. (See our wire [execution of multiple packages at the same time: http://forums.oracle.com/forums/thread.jspa?threadID=1045352 & tstart = 0])
  But when the choice of the agent in the properties panel, do we need to specify an exclusive agent for each scenario must be run simultaneously? Or we can use the same agent for all scenarios?
  
  Any help is appreciated.
  
  Kind regards
  Kai and Jan

  You can use the same agent, an agent must be able to handle multiple sessions.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What permissions are required for access to VMware Workstation?

  I need to provide access to a few virtual machines in our environment vSphere for a user through VMware Workstation 9.0.2 but questions.

  There are 3 virtual machines in a folder under models and virtual computers that this user needs access base (start, stop, console). I first tried assigning the role of user (sample) of the virtual machine to the user on the folder that contains these VMs (with spread), but trying to access one of them workstation as long as this user, I get the error was refused permission to perform this operation. I even tried to assign the role of administrator for this user on this issue and received the same error.

  Then, I assigned the user (sample) of the virtual machine and then later the role of the administrator directly to the virtual machines, but when you try to connect through my computer I get this error with or the other role (I have attached the log file, it refers):

  

  After clicking on OK, workstation breaks down, and then I get this error:

  

  The only way I could successfully get this user access is by adding the user to the local Administrators group vCenter Server, but after doing this, the user has full access to all virtual machines. I should also mention that Im able to access the virtual machine with the basic functions assigned via vSphere client to web without problem with permissions above affected as this user.

  Does anyone know what is required to provide access by workstation I'm looking for?

  Thank you!

  Figured it out!

  First, for each virtual machine that you want to grant access, to add the user/group with the assigned role, you want to give them. An additional step required for access to the workstation is, for each host you granted access to the virtual machines are on, you must also add the user/group and assign the read-only role, making sure to uncheck propagate to child objects.

  So it's similar to the thread above, but avoids having to explicitly revoke access to each another VM on the host. So now, when I log in as a user with that I was testing, I can connect to vCenter via my computer, only to see the VMs Ive applied custom roles to and, especially, can connect to them without problem!

  Also, it seems that even if work stations invite you to assign read-only permissions to the host is not actually do something.

  Thanks a bunch for all the help everyone... especially ShadyMalatawey. If I would not have seen this prompt in my computer to apply the permission he would have had much more time to understand.

• Card required for control special measures

  Hello!

  We have some NOR-DAQ cards (PCI-6221, 6251 and 6036E) but none of them seem to be capable of the following measure.

  There is a digital pulse train that must be received (practically with a meter). To measure the VOLTAGE to a channel of AI when a pulse is received. The frequency of the pulses can be 1 KHz, therefore generating events at each pulse for the PC is not viable. He must also know where the pulse OCCURRED (something as the card should have its own clock and should be able to put next to the measured voltage value).

  In addition, the map should give a sign of output (pulse change or line) of 1. the number of pulses reached a given amount or 2. the voltage is lower or exceeds a value given to a channel to HAVE. If an automatic output is not available at least we have an event to the PC.

  Will there be any card to fix this? In fact the card must have at least two meters since we have two trains of digital pulses, but only is active to a degree. Thank you very much for your suggestions!

  Could you clarify it please ", we have two trains of digital pulses, but alone is.
  Active to a degree.  You check in for a number of pulses on several lines?  You have more than one channel of Analog Input?

  Without taking into account the requirement for the 2nd train of digital pulses for the moment, to my understanding of the application the 6251 could do you need:

  1. the signal of AI must be connected to the 6251, since it is the only one of the three that supports analog trigger.

  You need to configure an analog reference trigger to allow comparison shipped.  You can use the line to HAVE it if you are sampling just one channel (or an APFI line if you're sampling from multiple channels).  Export event of analog comparison will tell you when the signal is outside a certain threshold (the graph presents 'Entering the window' but you can select "Exit" instead):

  

  2. connect the Digital pulse train to one of the PFI lines on the 6251.  It will be the sample for your task clock to HAVE.

  4. use the same PFI line as a source for a meter (pulse) output task.  Set the initial delay so that when the desired number of pulses have been counted you will produce a pulse on the output of the counter.

  5. you now have a line telling you what N pulses have been reached (from step 4) and a line telling you where I is outside a window (in step 1).

  6. If you want to timestamp pulses using the edge of the Office counter, you must use the counter 2nd as a county of edge stamped with the external pulse as your sample clock signal.  This will give you a very precise timestamp of your external impulses (compared to the beginning of the task).

  If you need for impulses of timestamp on multiple lines, you can look in the task configuration of change detection of DI on the 6251 and using change detection event as the sample for the task of counter clock.  You must implement logic in SW to determine which line has generated the actual event.

  You have also 4 other counters to play with on your other DAQ hardware two, so depending on what you want to do, you should have a little flexibility.

  Best regards

• SE error message: "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your provider staff or the support package 'after updating to iTunes

  Original title: after recent update, the installation software WONT work properly! Help!

  • I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.

    I get a message saying "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

    Anyone know what I need to do? Or how to fix it?

  Hi MxGurl,

  If this occurs after the installation of update Itunes, then go to the following link and check if it helps.

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.

  http://discussions.Apple.com/category.jspa?categoryID=149

  You can also check out the following link and try the steps by Suresh I Support Microsoft, moderator and Andre.Ziegler and check if this may help

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/11f4e2c0-0595-4c7f-8579-e52d2c4bf36c

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• How do go back (or forward) several steps without having to navigate in the history tree?

  Internet Explorer has a down arrow button (drop) next to the rear and the next button which allows to skip several steps back (or forward) in two clicks. How do I do that in Firefox? Navigation in the history for this simple task tree is much heavier.

  Use one of the following methods to open the tab history list:

  • Right-click on the back or next button
  • Press and hold the left button of the mouse on the active back or forward button until the list opens

  You can watch this extension:

  • Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

• There is a problem with this Windows Installer package. A program required for this install to complete could not be run Windows 10

  There is a problem with this Windows Installer package. A program required for this install to complete, could not be executed. This appears when trying to update

  Repair Apple Software Update of programs and features, Control Panel, and then try again.

  If not for general advice see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• UMI-7774 required for readers of nor?

  I'm a movement control system design using 3 stepper motors (or Nema 23) and therefore 3 or P70360 readers. Is a umi-7774 required to connect to the controller 4 card pci motion-axis?  (I'm confused as its description on the site nor said that it is necessary for the 3rd party readers BUT in discussions I've read a lot of people have used umi 7774 or readers)

  Hello aks.

  Yes, you will need to purchase and use our 7774 universal movement (UMI) Interface to connect the three engines of readers / motion controller card.

  He could have confused because it does not explicitly say that it is necessary for the 3rd party readers, but not necessarily required for our readers. That said, the vast majority of customers use the UMI Board, because it eliminates the need for custom cables and makes it much easier to connect to several axes.

  Here are some links that can provide more details and could be useful.

  [1] NI Stepper Motion System selection guide

  [2] of wiring for a movement with a Danaher drive system explained

• I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

  Original title: Windows File Protection Pop Up Message.

  I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?
  2. when exactly you receive popup?

  Run SFC scans the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• I get a message that says, "files required for Windows to run correctly have been replaced by unrecognized versions...» »

  Original title: Windows unrecognized files

  I get a message that says, "files required for Windows to run correctly have been replaced by unrecognized versions." To maintain stability, Windows must restore the original versions of these files. Insert your Windows XP Professional CD2 now. "I don't have this CD.  What can I do to fix the problem?

  Hi Kathy111,

  ·         Exactly when you receive this error message?

  I suggest you to perform the auditor of system files on the computer.

  You may consult:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.

• What does it mean when windows 7 can't copy the files required for installation?

  I tried to install windows 7 on my Dell.I have xp on it, but when I run the first step of copying the files it stops to 60% and says "windows cannot copy files required for installation. Make sure all files required for installation are available, and restart the installation. How can error code 0 x 80070001"I fix?

  See if this post is of no help: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/error-0x80070001-cannot-copy-files-needed-for/e2b51d33-adad-43a1-b37f-19537bdfee2a

  J W Stuart: http://www.pagestart.com