Several worksheets in a workbook

Similar Questions

• Export tables to a (csv) several worksheets in a workbook

  Hello
  I have a script for users of the audit and parameters and so far I have exported arrays of different csv files.
  Is it possible to export, for example, two tables for two worksheet to a csv file?
  
  Thank you! :)

  Hello
  A CSV in not an excel document - it can be opened as is it it an Excel but there is no way to convert a .csv into a multi spreadsheet file.

  You need a tool that can wtire this natively do this or something or some vba within excel to extract the data and fill several sheets?

  Kind regards
  Harry

• Discoverer Web services slow down when workbook contains several worksheets

  Hi all
  We have a problem with our installation of discoverer (v. 10.1.2 web services patch: 5648158). We built an application that uses the discoverer web services to access the list of worksheet and obtain export xls, pdf, and xml and more defined reports. However, we discover that, as access us the worksheets in a specific workbook increases (more than 30 sheets), web service calls are taking too long to respond. Sometimes, the browser's point of view, the request is stuck (we waited for almost an hour and the page has always indicated he was loading).
  
  The reports will work perfectly, when we use more or spectator. Has anyone encountered a similar problem? Where can you check for newspapers to see if everything is ok? If we go to another workbook with spreadsheets 5 web service call turns quite quickly. The problem appears only when we open a workbook with more than 30 reports.
  
  Concerning

  Hello
  I'm not at all surprised. You are not supposed to have cabinets with this number of worksheets. These will cause serious problems, even without using the API.

  When a workbook is opened, the system must validate all the worksheets prior to it. Spreadsheets more it will take longer.

  Whenever I'm doing assessments of the system for Discoverer I always recommend you to have 6 or fewer sheets per workbook, split the biggest into more manageable pieces.

  Hope this helps
  Best wishes
  Michael

• After the restoration of my computer, I lost my Microsoft Excel and Word. How can I get that back. I have several worksheets that I can't access.

  Need help finding my Excel spreadsheets and my Word Forms.  I lost Microsoft Excel and Word, how to restore?

  Restoration, as in as long as the factory? That case you need to install Office from your office CD

• Workbook of analysis - several tabs of a cube type question?

  The workbooks are composed of worksheet, and a workbook can be associated with a type of analysis in IOP.
  
  In the demo of the IMP, the type of analysis workbook is linked to several cubes, one sheet per cube.
  
  Usually customers put in place one sheet per cube for their analyses in, but is there something that says they cannot have multiple worksheets for a cube?
  
  Is it possible to configure multiple worksheets, each showing a set of different measure, but have them connected to a single cube?
  
  Customer has an existing process requiring navigation to a specific intersection and has no desire to put all the measures they need on a spreadsheet, (they are used to a degree by spreadsheet and do not want to change what they do), while we're talking like a dozen sheets here.
  
  Bonus question: connecting the navigation so that if they choose a specific dimension member in a spreadsheet, the other worksheets in the same level go to this specific dimension member.
  
  Thank you.

  Usually customers put in place one sheet per cube for their analyses in, but is there something that says they cannot have multiple worksheets for a cube?

  You can have several spreadsheets attached to the same cube.

  Is it possible to configure multiple worksheets, each showing a set of different measure, but have them connected to a single cube?

  Yes.

  Bonus question: connecting the navigation so that if they choose a specific dimension member in a spreadsheet, the other worksheets in the same level go to this specific dimension member.

  Not currently. Each planning worksheet is independent. You can do more with VBA, but this will be a consultation activity.

• print a worksheet of an Excel workbook

  I can open a reference to an MS Excel (workbook), open a particular worksheet and fill cells. A macro cannot be magic and populates cells in another worksheet. What I have to do now is to print a particular spreadsheet. Is there an example autour for printing a single worksheet in a workbook. Guess I can copy worksheet in an interim report, print it out and then delete it - is there a better way?

  I enclose the code that I use to open and edit the workbook - probably besides the point but illustrate the approach that I use

  thanx

  lmd2

  If you have access to the report generation tool, you can use the following example, write it down other than Sheet1 of a spreadsheet Excel (report Gen) to print a specific worksheet.  Just add a print report after the excel spreadsheet and you should be all set.

  You try to do this without the help of the report generation tool?

• several text to an excel workbook files

  Hello

  I know this question has been asked and answered many times and I read a lot of posts about it.

  but none of the previous posts were really able to help me. so, here's my problem:

  I have to be able to prepare several text files and save the content of text files in a new file (text), and then paste this new text file into a new worksheet in an excel template.

  Here's what I did so far, I am able to read the 3 text file and concatenate all 3 files in a new text file, but when I transfer to Excel, it shows only a single file is pasted into the new worksheet in Excel.

  Alternatively, each of these text files spill in a new worksheet, or of several worksheets would be good too, if we do not have concatonate first text files.

  I hope someone can show me the way.

  Thank you all.

  Yes, do the different 'Start' cell each iteration. You can use the "next cell down to the left" If you want your data stacked vertically, or 'next cell up right' to get it stacked horizontally.

  

• Excel: Get the number of spreadsheets and each worksheet name

  Hello

  I need to read the total number of worksheets in a workbook and the name of each worksheet.
  Can someone please give me a pointer to the right features?

  Thank you
  Greg

  Hello

  the following code is used to retrieve the name of each sheet to a workbook given as string 'name '. It assumes that you are using the library ActiveX Excel (excel2000.fp) and displays only the code corresponding to this task: code to launch Excel and connect it to the worksheet is not displayed, you can take it from the Excel example installed with CVI.

  long	nSheets;
  
  int		i;
  
  char	* name = NULL;
  
  errChk (Excel_GetProperty (ExcelAppHandle, NULL, Excel_AppSheets, CAVT_OBJHANDLE, & ExcelSheetsHandle));
  
  errChk (Excel_GetProperty (ExcelSheetsHandle, NULL, Excel_SheetsCount, CAVT_LONG, & nSheets));
  
  <= nsheets;="" i++)="">
  
  	errChk (Excel_SheetsItem (ExcelSheetsHandle, NULL, CA_VariantInt (i), & ExcelWorksheetHandle));
  
  	errChk (Excel_GetProperty (ExcelWorksheetHandle, Excel_WorksheetName, NULL, CAVT_CSTRING, &name));))
  Add code to manage the content of 'name' here
  CA_FreeMemory (name);
  
  	errChk (ClearObjHandle (& ExcelWorksheetHandle));
  
  }

  When dealing with ActiveX, remember to dispose of all handles allocated before closing the application, otherwise a task Excel remain pending in the system and prevent the connection with it.

  macro errChk is taken from the Toolbox of the programming interface: you can he strip or add toolbox.fp to your project.

  I can't help you in case you intend to use ExcvelReport.fp because I do not use it in my business.

• Adding images in multiple worksheets in an excel file

  Hello!

  I would like to know how can I add images to different worksheets of the same excel file. I am currently using the report generation tool (add the image to the report VI). Using the MS Office cluster I can adjust the position of the image in the first worksheet of the excel file.

  However, I would add two images in the THIRD worksheet of the excel file.

  I'm generating a file of PDM first, where I sets different spreadsheets or tabs of the file, and then I became an excel file. How can I put the location of the images in a spreadsheet file concrete?

  Thank you very much in advance!

  Use Excel to Worksheet.vi (from General Excel palette) to select the worksheet of the workbook and Excel Insert Object.vi (Excel advance palette) to add an image.

  Ben64

• Read the names of back sheet in excel workbook

  I am trying to build a vi to organize my data in Excel workbooks.

  There are ActiveX controls that are available to communicate with MS Office, but I could not find any usable help and detailed explanation of the controls, properties, arguments, orders etc.

  For example, I want to do simple task-to open a workbook and reread the list of the names of worksheets.

  General - where can I find assistance for activeX controls? They are part of ASM excel activeX library (if so, where can I find info), or it is a version of library of NOR?

  Or I have to go and assume that all properties blindly until you find a questionable way >

  Hi Krsone,

  Once again, thank you for your example, I have attached my vi doing exactly this:

  Opening excel file and provides a list of the names of worksheet in the workbook.

  It can be used as a Subvi to open the spreadsheet workbook/search by name and edit/modify cells etc.

• In the worksheet, the hyperlinks do not work when converting to PDF

  I have an excel workbook that contains hyperlinks (in the worksheets in the workbook) but when I convert it to PDF format links lose their connectivity - please help!

  Hi nickir48946044,

  Open Acrobat, navigate to the Edit-> Preferences menu-> convert to PDF-> MS Excel-> the settings of-> tick "add links to Adobe PDF file.

  

  Click OK to confirm the changes, now, try to create a PDF file using Acrobat itself application.

  Let me know if it solves your problem.

  Kind regards
  Nicos

• Combine 2 discoverer workbooks

  It is a simple question, but I can't understand it. I separated 2 discover reports. How to combine them into 1 workbook?

  Hello
  You can follow the steps as described in the following thread:

  Re: copy worksheets from one workbook to another

  Tamir

• Copy sheets from one workbook to another

  Hello
  Is it possible to copy sheets from one workbook to another in the same sector of activity? (discoverer more 10g v 10.1.2.55.26)
  Thank you
  Select this option.

  Hello
  It is not possible to use the most.
  It is possible to do so using the Discoverer Desktop edition.

  with office, follow these steps:
  1. connect to the discoverer desktop computer and open the workbook you want to copy from.
  2. open the workbook you want to copy.
  3. While both are open, press the "Restore down" button in the upper right area of the worksheet. (the Center button of the 3 to minimize, restore down, and close).
  4. now change the size of windows so that you will be able to see two worksheets side by side 1.
  5. place the mouse on the name of the new worksheet, press left click and drag the worksheet in the second workbook.

  You move the worksheet from one to the other, if you copy the worksheet to another workbook, and then before you start duplicate the worksheet and accomplish the foregoing on the duplicated worksheet.

  Tamir

• Microsoft works spreadsheet program

  Can you have multiple worksheets in a single document in the spreadsheet works just like you in excel?

  These tend to confirm the response as a resounding "no".

  "NOTE: Excel workbooks were usually several pages, called worksheets." "Works Spreadsheet can open only one Excel worksheet at a time, so you will be asked what to open spreadsheet.

  Microsoft Works and Microsoft® Office
  http://www.Microsoft.com/products/works/more/worktogether.mspx

  «The Works Spreadsheet allows you to create a spreadsheet, use basic formulas and create and view graphs.» Sorting works as well as I can tell. Also in this case you did not change, macros, AutoShapes, WordArt, and other features to Microsoft Excel. A big difference compared to Excel is the spreadsheet Microsoft Works 9.0 allows only a Works spreadsheet. If you open a Microsoft Excel document with several worksheets, you'll get a dialog box asking you to choose which piece of work you want to load. Another difference is that in Excel, you can select several sections not connected to the document, but in a worksheet Microsoft Works 9.0, you can do that. The Microsoft Works 9.0 spreadsheet also allows only of 16 384 rows and 256 columns. I tried to open a number of sheets Excel spread to work and it did not work very well. First of all, I had to choose a worksheet. Then the Works spreadsheet cannot load many of the formulas and the names of symbol and in the end, I had nothing but nonsense. »

  Great potential sloppy by Microsoft (on purpose?)
  http://www.Epinions.com/review/Microsoft_Works_9_PC_882224268370/content_472853352068

• Why the report designer opens all of my excel files?

  My application uses vi in the report generator toolkit to continually save data to an excel spreadsheet (in fact, several worksheets in the same file). It works fine, however, the problem comes when we try to open/view all log XL files previously created (or _any_ other file XL by the way), because it is basically impossible to read the file due to the constant blinking/flashing XL writes in the log file. If you make the mistake of close open files, the firm application of logging (may be able to intercept this error, but didn't think of it yet). Also, when you start closing records in XL, it seems that he opened to all (or almost all) of files in at least the log folder, but in other (some) places as well. The bottom line which is the only way we found to process view, all the files of log XL is to stop the application - which is not really acceptable.

  I'm under LabView 2011, in development (OS Win7) and executable mode distributed (Win Server 2008 R2 OS) and see the same thing. I searched the internet and OR support site hi/lo for clues, but if none of them worked (XLSTARTUP, etc.).

  I have several other applications that use log files, and in all cases we can open/close the files of active log (read-only) with no problems. Does anyone have an idea of what could happen here and how to fix it?

  Thank you

  Mark-san

  Charlie,

  Well, I thought to use scripture to the SS... but I have not seen an easy way to manage multiple worksheets. Would need a separate file for each worksheet?

  Although I love the .csv format since it is essentially text (readable), I think the TDMS format may be better suited due to the structure of the channel - think I can use one channel for each worksheet (?). But can I open a TDMS (read-only) file then it is written to, and then create the desired output of Excel (snapshot) from there?

  Mark