SFC/scannow vs DiskCheck... What's the diff?

Similar Questions

• What is the diff between a 32 and 64 bit, Windows version.

  Original title: is win 7 has also a 32 and 64 bit...

  1. What is the diff between a 32 and 64 bit, Windows version.

  2.i have a computer laptop 64 bit. so I install win 7 32 bit...

  3 - is the application and games from 32-bit to 64-bit media...

  1. What is the diff between a 32 and 64 bit, Windows version.
  32-bit Windows uses 32-bit programs. 64-bit Windows uses 32 and 64-bit programs.

  2.i have a computer laptop 64 bit. so I install win 7 32 bit...
  Only if you opt for a multiboot configuration.

  3 - is the application and games from 32-bit to 64-bit media...
  Yes.

• What is the Diff between the definition of legal entity of GL and human resources?

  Dear Sir

  What is the diff between the definition of legal person of the GL = > Accounting Setup and then set it to HR organization > Structure of work?

  When I set it to GL, I couldn't find it in HR.

  
  Ahmad Hamdan,

  Kind regards

  I found the answer

  R12: FAQ: Configurator of the legal entity (Doc ID 1381359.1)

  [MOS content removed by moderator - this is a violation of the terms of support and Conditions other than MOS content in the public domain]

• What is the diff bet. helmet has a gold plated 3.5 mm taken and headphones with a normal socket?

  What is the difference between a pair of headphones has a gold plated 3.5 mm jack and a headphone output with a normal socket?

  Thank you

  SR

  Bling... and possibly a few milliOhms.

• What is the diff b/w JDK and JDE

  What is the difference main b & w ang JDE JDK?

  Java JDK = SDK

  Here is a good list of what's in the JDK http://en.wikipedia.org/wiki/JDK

  In short, it is the collection of tools for compiling and running java based applications and libraries

  JDE = java development environment

  It's the environment and development, as well as the collection of development tools used to create BlackBerry applications, the JDE invokes and uses the tools included in the JDK

• What is the Diff between extract data and analytics

  Hello
  
  I'm new to HFM.
  What is the difference between the extract data and extended Analytics?
  
  Thank you
  Fri

  Extract data will create a flat file of entity currency only on folders - to simplify, there basically entry level data with the exception of the entity dimension and account where higher level data can also be extracted.

  EA has the ability to turn a star schema or a flat file that contains the data to any level of any dimension.

• What is the diff between backupset and element of RMAN backup

  Hello
  
  Please help me understand the diff backupset with RMAN backup element
  
  Thank you

  Hello

  Are you can, use the BACKUP AS BACKUPSET command, you can have a multiple backupsets.

  Kind regards
  Delphine K

• F4V OR FLV - what's the diff?

  Hello

  I just spent the last two hours trawling through my CS4 docs and file formats different forums in a vain effort to find out what the difference is between F4V and FLV. So far, I have all I can get is a lot of detail about the codecs but zip on these file formats. I think F4V is a file format later that FLV and perhaps it contains a codec more recent such as On2 VP6-S am I right?

  Can anyone help?

  Thank you.

  http://www.Adobe.com/devnet/FLV/PDF/video_file_format_spec_v9.PDF

• Two version of on my updates, PP Pro CC PP and PP Pro CC (2014) why two? What is the diff?

  I seem to have two version of PP Pro and don't know why. He is Premier Pro CC and first Pro CC (2014) are different versions? If they are lined to the top? Should I get rid of one? I'm trying to clean up my computer anyway and streamline everything so I don't want foreign programs.

  I also CC InDesign options (2014) installation and update of InDesign CS6. Are they different? If I install (2014) it will replace CS6 so I don't have one of these?

  Using a Mac, the latest version of Yosemite 10.10.1

  Thank you!

  When Adobe came out with the cloud, the intention was to have an updated version of such developments.  They could not achieve this goal and eventually produced the CC 2014 version which adds to the original CC.  If you do not want the original CC you can remove it.  If you have InDesign CC 2014 and that you know you pay a subscription for that you can get rid of the CS6 version.  Some people prefer if hang on to older versions in case they need create an older version to return to their customers (who do not have the most recent version).

• What is the diff between replication and streams

  Hello
  Can someone tell me the difference between replication and Oracle streams, when I look in the documentation, it says to use the Console of EM Oracle to set up the Replication.But I'm not sure how, I download the EM Console of Oracle.
  
  Thanks to anyone who responds to this.

  Technically there is no relationship between the so-called "Advanced" replication and water courses. They were built by different development using totally different technologies teams. AR is materialized views and triggers... Watercourse is AQ, LogMiner and RMAN.

• PROTECTION OF FILES WINDOWS WITH THE SFC / SCANNOW

  What I received for the initial mistake of the window File Protection:

  uninstalled also 2 programs McAfee that had been installed earlier.

  I did exactly what was suggested. I ran sfc / scannow using RUN with my running w SP2 cd, but as scannow was running, he kept asking:

  Files that are required for Windows to run correctly must be copied into the DLL Cache.

  Insert your Windows XP Professional Service Pack 3 disc now.

  Choices: Retry more information Cancel

  PROBLEM: Service Pack 3 has been a WINDOWS UPDATE DOWNLOAD.

  What should I do now?

  Do not answer my own question, but that should I or can I just uninstall Service Pack 3, which was an update of Windows and then run sfc/scannow with my original cd.

  and also I saw this posted.  Should I worry about the warning below?

  To uninstall SP3

  1. Click Start and then click Control Panel.

  2. Click on Add / Remove Programs, click Windows XP Service Pack 3, and then click on remove.

  3. Follow the instructions that appear on your screen.

  Warning

  If you choose to uninstall SP3, a dialog box displays a list of programs you installed after you installed the SP3. If you continue, it may be that these programs do not work correctly.

  SHOULD I WORRY ABOUT THIS WARNING? STEP BY STEP SUGGESTIONS WOULD BE HELPFUL.

  Do not uninstall the service pack 3.

  Do not follow the instructions to use sfc/scannow.  99.999% of the time, it is a waste of time and will probably result just to generate accurate error you saw.

  Are these error messages generated spontaneously or only when you run sfc/scannow?

  Why do you run sfc/scannow in the first place?

  If you receive these errors without running sfc/scannow, follow the instructions given by Jose Ibarra in your original post.  In other words, look in the event viewer and see what file is being complained about.  Display the names of files in your response.

  "Slipstreaming" - that Jose correctly tells you to do so - is the process of combining a downloaded XP service pack 3 with your original XP SP2 CD to get service XP pack 3 CD - what sfc/scannow will like better.

  You must have access to a CD burner.  All the necessary software can be obtained free of charge on the Internet.   If you have a CD burner, there are many sites with directions.  These are just two of them:
  http://www.ZDNet.com/blog/hardware/creating-an-XP-SP3-slipstreamed-ISO-file/1848 (do the actual burning of the ISO file that is created by using ImgBurn)
  http://www.winsupersite.com/article/product-review/slipstreaming-Windows-XP-with-Service-Pack-3-SP3

• has ran sfc/scannow __message: req for Win to run successfully the files must be copied into the DLL cache. Insert the win xp pro sp3 cd. I do not have a CD. How to fix?

  Having problems starting and IE7 display problems (missing buttons on web pages or text overlay and cannot respond to the answers in this forum. AE)  has ran scannow and received the message in my question.  How can I fix?

  If you are interested, you can see my other problems that I posted another question about 'black screen at startup... '. »

  Windows xp media center SP3

  Gateway FX400XL

  NVIDIA Geforce display

  IE7

  It is unlikely for sfc/scannow to run slowly unless the Service Pack to your real XP bootable installation CD matches the Service Pack installed on the computer.  This usually isn't the way things are in the real world.

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Sfc/scannow will not help running.  You can not worry it run in the future.

  Let's see what you have right now.

  Please provide additional information on your system:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  It seems that the video drivers were considered suspects and since you have NVIDIA, I let NVIDIA look at your system and see what their online scanner has to say about your system.

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the DRIVERS GRAPHICS button to start scan and see what they have to say about your graphics card and if you need to update your video drivers.

  If you have an NVIDIA card installed, you might think to replace it too (later).

  You can also consider ditching Norton - at least for now...  Maybe just uninstall Norton temporarily using their special uninstall program and get your system stabilized and then when things are stable, reinstall your Norton again if you are forced to keep.   If you have installed Norton 'out of the box' it really installs a bunch of stuff that can thwart the troubleshooting.  You can save time by simplifying your configuration by getting rid of Norton and do it out of the picture entirely until things settle down.

  Let's see what that your msinfo32 and NVIDIA has to say first.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use the sfc/scannow utility?

  I tried to enter sfc/scannow command prompt, but says my command prompt: you must be an administrator running a console session in order to use the sfc utulity.  It is not necessary to enter an administrator password or log in.  So can not run it.  I logged as an administrator at the start of my pc.

  Hello

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Usually a good idea to run checkdisk afterward.

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• sfc/scannow foud the corrupted files after upgrade from Vista Home Premium 32 bit

  Hello

  It is an event that I went through:

  (1) recently I received a bunch of updates to Vista Home Premium 32 bit, after I did the update I decided to perform sfc/scannow task and this is the error message I got the "Windows Resource Protection found corrupt files and managed to fix them." Details are provided in the CBS.log windir\logs\CBS.log newspaper. For example c:\windows\logs\CBS\CBS.log

  Repair of system files change will take effect after the next reboot.

  (2) so I did restart and then try to run the sfc/scannow task once again, but I still got the same message I described in step 1 again. So basically sfc/scannow function did not repair the corrupted files.

  (3) the next step, I decided to perform a repair Installation of visa which took me 10 hours to complete the task, once the task of upgrading of repair has been made and before the windows update, I ran sfc/scannow task and this time he finds any corrupted files, but after I updated windows sfc/scannow result was the same as step 1.

  It is obvious to me that one of the updates of the origin of this problem, but find it me hard to pinpoint that one. So I am writing this e-mail to help and I hope that the problem will soon be solved. Please let me know if you need me to submit the CBS.log file for you to review thanks in advance.

  Kind regards

  Jdec9

  Hello

  Sorry to hear that you are facing a problem due to the update of Windows. I'll certainly do my best and get the issue resolved.

  I suggest you to view update history to see which update might be causing the problem.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  (c) to display more information about an update, double-click it.

  Once you know Update KB number, provide us with the same for later analysis. You can also try the steps in the article and see if it helps.

  You can also download the files of cbs to Skydrive.

  Use SkyDrive download collected files and post screen shot/image

  Hope this helps and let us know if you need more assistance. We will be happy to help you.