SG100D - 08 p - how much power per port?

Similar Questions

• How much power for AMD - A - 3670K, 1 TB 7200 HDD and a Samsung EVO 120 G SSD?

  I have a HP P6-2376 with a Holly2 MoBo and it came with a 300W power supply.

  I want to install a Samsung SSD of EVO to run WIN8 OS and also have a 1 TB 7200 RPM HARD drive.

  I have a 8 G or DDR3 1600 memory and currently have the AMD APU A4-3420, but am upgrading to the A6 - 3670 K.

  My current diet is adequate, from a 65W APU to an APU 100W so the new SSD?

  Thank you.

  Warhorse99, welcome to the forum.

  If it was me, I do the upgrades and see if an upgrade of the power supply is necessary.  It does not simply there is not enough power, but one thing is not custom.

  I just installed a Samsung EVO 840 500 GB, SSD.  I was given advice on installing it.  Connect the SSD to one of the other SATA connectors on the motherboard.  Let your HARD drive connected at the moment.  Then download and run the Samsung Data Migration tool.  Clone of the legacy of the SSD drive.  It was extremely easy.  When the migration is unplug the HARD drive and start.  My SSD started without a change in the BIOS.  Once the SSD is installed, you can also use "Samsung magician" to optimize for.  It is on the disc that came with the SSD drive.  The Migration of data from Samsung tool instructions are on the same page.  Make sure that the amount of data on the HARD drive is more than the amount that fits on the SSD.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.

• Hi, my iphone 5 have some problem in its port .i want to replace it, can someone tell me how much I spent on this iphone?

  Hi, my iphone 5 have some problem in its port .i want to replace it, can someone tell me how much I spent on this iphone?

  Apple will usually provide a replacement

  You can check the cost here

• Best practices ISCSI VMK? How much per physical nic?

  Hi guys,.

  I have a practical question best.

  I have an ISCSI unit with two controllers. Each controller has two ports. The configuration is the following:

  A: controller

  P1: 192.168.7.1/24

  P2: 192.168.8.1/24

  Controller b:

  P1: 192.168.7.2/24

  P2: 192.168.8.2/24

  Each controller is connected to two switches. P1-> P2-> SW2, SW1.

  Each server has two network adapters, dedicated to ISCSI traffic. The question is: VMKs how do I run a physical NIC? One? Or two?

  I've set up so be it, but I'm not sure how it should be done. Currently, all guests have a VMK by NIC my argument is despite VMKs how I, the flow is still limited to 1 GB/s per port of the server (unity of ISCSI is 10 Gbps per port).

  Option 1:

  Server A:

  • MI 3
    • VMK1: 192.168.7.20/24
    • VMK2: 192.168.8.20/24
  • NIC4:
    • VMK3: 192.168.7.21/24
    • VMK4: 192.168.8.21/24

  Option 2:

  Server A:

  • NIC3:
    • VMK1: 192.168.7.20/24
  • NIC4:
    • VMK2: 192.168.8.20/24

  Is it not wise to have a physical NETWORK card with two VMKs? I'm not sure if two VMKs physical NIC is "good" because it could lead to performance?

  TIA!

  A VMK by NIC is the supported configuration. If you do differently, you may not be able to properly configure the iSCSI.

  André

• Why membership to cc fees upward of $20 per month in July? how much I would save if I paid annually instead of monthly?

  Why membership to cc fees upward of $20 per month in July? how much I would save if I paid annually instead of monthly?

  citizenpayne wrote:

  Why membership to cc fees upward of $20 per month in July?

  Probably because what you be hired for the promotional contract of $29.99 / month (for the first 12 months) and your 12 months expires soon. You will be renewed at full price $49.99 / month.

  Membership plans: pricing and subscriptions | Adobe Creative Cloud

  citizenpayne wrote:

  how much I would save if I paid annually instead of monthly?

  Membership plans: pricing and subscriptions | Adobe Creative Cloud

  monthly payments of $49.99 x 12 = $599,88 per year, paid in monthly installments

  12 months paid in advance from the start = $599,88 (no difference)

• I don't have a warranty, how much does it cost to fix iphone 6 charger port

  My Iphone 6 was difficult to use because I can't even charge my phone I have to put the cable in a really odd position in order for me to load that I need to know how much it would cost if I took it to a local store Apple to fix it

  Apple is not repair iPhones except the replacement of the batteries and the (few) cracked screens.  Otherwise, you can get an output of replacement under warranty with a refurbished unit of the same model, color and quality, price varies by country.  Take it to Apple for review.

• I already bought lightroom 5. I now want to buy photoshop. How much will it cost per month? I need to download it today

  I already bought lightroom 5. Now I need to buy photoshop. How much will it cost? The only one I see includes lightroom, if I've already paid to do I get ohotoshop itself for less than the package for both together?

  No matter that you already bought Lightroom, the cheapest route for you would be to get the package of Photoshop Lightroom.

• How much slowing down video of slow mo?

  Hey everybody,

  I'm trying to understand the function of slow-mo of the iPad 2 a little better.

  I see that he shoots at 120FPS from the apple site:

  http://www.Apple.com/UK/iPad-air-2/specs/

  Anyone know what rate it plays back videos in? I'm figuring how much it slows the video so if you know that, it would also be useful.

  Thank you

  Joseph

  The user guide. Normal is 30 images/s, slo - mo is 120 FPS so I would say it's the quarter speed.

  "Shoot video.

  With camera, you can record videos, including videos of idle and accelerated.

  Record a video. Select the video, and then press the save or press a volume button, to start and stop recording. You can choose to capture 720 p or 1080 p at 30 fps (frames will Flash). You can also capture 1080 p at 60 frames per second and 4K video at 30 frames per second video on iPad Pro (9.7 inches). To change the settings for video recording, go to settings > camera & photo > video recording.

  Take it slow. (Pro, iPad 2 Air, mini iPad iPad 4) Choose the Slo - mo to capture video of idle at 120 frames per second. Later, when you change the video, you can simply set a part of it to read at idle, and the rest reads at normal speed. On iPad Pro (9.7 inches), you can choose between 120 fps and 240 frames per second. To change the settings of Slo - mo, go to settings > camera & photo > recording Slo - mo. »

  From: Apple Inc. "iPad for iOS 10 user's Guide." Apple Inc., 2016. iBooks.

  These documents can be protected by copyright.

  Find this book on the iBook Store: https://itun.es/us/Cf0Odb.l

• How much does it cost for a replacement battery for an iPhone 5

  How much does it cost for a replacement battery for an iPhone 5

  In the United States, $79,00.

  IPhone battery & Power - official Apple Support

• Equium A100 died, how much will it cost to repair?

  Equium A100 - 02L
  Model PSAAQE-00P00KAV number
  OS - Vista

  I just got this laptop borrowed a few weeks ago because my computer is dead.
  I don't think he left on warranty.

  It worked well until one night he refused to turn on, it has not been abandoned or whatever it is spilled on it, she had perfectly good antivirus (AVG Internet Security) and was working perfectly before this.
  It lights up just, the fan is on full speed and the processor light in front comes on for a few seconds and then turns off. Nothing comes on the screen, he's just dead so there is no hope to get into the BIOS.
  I tried to re-seating the RAM and that you can't find an easy way to access the CPU so I left alone. I don't think that there is nothing wrong with the HD or BIOS would continue to operate, I'm guessing that something is wrong with the main card.

  So any ideas how to fix this problem or how much it would cost to get it fixed?

  Hello

  You can try to remove the battery and the power adapter for several hours as described here:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  In the worst case it s really a hardware malfunction and I assume that this has something to do with the motherboard, but I think that this should be verified to an authorized service because they have professional tools to check it.

  I doubt it s something wrong with the HARD drive or the BIOS. To me, it looks like a serious hardware problem, but that s my personal opinion

• How much energy is consumed Equium P200D

  Please can someone tell me how much energy consumes a laptop Toshiba Satellite P200D?

  I know that his writings on the adapter in volts and amp but I want to know how much it actually consumes in watts, as a power of 100 watts can be consume 130 watts to produce.

  Thank you

  Hello

  I think you could find it if you would link it to the meter of watt like this:

  [Wattmeter | http://ecx.images-amazon.com/images/I/31IPAYeOvzL._SL500_SL150_.jpg]

  Welcome them

• How much it might cost to fix an NI Elvis II

  Nevermind, I ordered an NI Elvis II + on eBay without power and when I got the power supply (today), the eddd Board does not work.  Well, the best thing I could do was to contact the vendor for the return but the seller did not allow that so I opened the case, hopefully, eBay will be on my side.  I would have had because it wasn't that why the seller has not sold it with food.

  For the worst cases, in general how much can it cost to fix a hardware with National Instruments Repair Services?  My genius sense let me know that the Board of Directors has been damaged to the input power no power indicator. Without doubt, the seller or the supplier of the seller used power invalid to test because they did not have the right type of power.

  Thank you very much.

  Hi muahuang1234,

  Yes, the cost is fixed on a base by revision.  Inspection technician does not affect the price.  If nothing is found wrong with the device, a fee no problem found (or NTF) is evaluated.  You should discuss with the RMA Coordinator when you call a more specific pricing.

  Kind regards

• How much does it cost to upgrade old compac windows 98?

  I have an old conpac which has windows 98 on it.  How much would it cost to upgradt it for Windows7?

  I have an old conpac which has windows 98 on it.  How much would it cost to upgradt it for Windows7?

  Three points:

  1. it is not possible to upgrade from Windows 98 to Windows 7. The only way to get Windows 7 is to do a clean install.

  2. your old Compaq is almost certainly * way * low power for Windows 7. Windows 7 installs probably not at all and it if does, it runs very slowly. I recommend strongy * against * trying to do this. If you want to run Windows 7, you need a new computer.

  3. If you want to do this, you will need to purchase a full copy of Windows 7. How much it costs depends on which edition you buy (Home Premium, professional or ultimate edition) and where you buyoit. Go to web sites like newegg.com and check prices.

• How much battery is used while you sleep?

  Laptop Toshiba, Win7.

  Unofficial tests on a Lenovo ThinkPad T61p (Windows 7) d MacBook

  http://Lifehacker.com/5526542/how-much-battery-life-does-sleep-mode-really-drain

  FYI - Windows Vista power management

  Standby mode consumes battery power, although much less than normal on the State. If the computer is in "sleep" while being powered by the battery and the battery charge runs out, the computer turns completely off and lose the open programs and documents in memory. In this case, any changes to documents which were not yet recorded on the disc would be lost.

  Hybrid sleep provides an extra measure of convenience. If the battery of the computer becomes completely discharged when the computer is in hybrid sleep mode, the state saved in the computer's memory will be lost, but Windows will be able to recover the state saved from HDD - although a little more slowly.

• The switch SLM224G does support VLAN per port?

  I'm looking for a simple solution create two LAN. One for my own and the other for my clients, who will be able to use the desktop computer with internet access. I only have one internet connection (ADSL over ISDN) and wil not get another just for my clients.

  My own network should not be accessible or visible to users who use the PC clients. The other way around is authorized, but not really necessary. My setup requires me to connect to the switch to the (ISP) router, and the router has a LAN port not able to do anything related to VIRTUAL networks.

  I read on the VLAN port to put here, where it is stated that creating separate LAN is just the ports in VLANS on the switch, nothing else to do... However, they used a NetGear smart switch.

  I checked SLM224G of Cisco because it is affordable, has 24 ports (instead of 8 for the NetGear) and must support of VLAN. I read a lot about VIRTUAL networks, including:

  «- Means the VLAN per port that you can reconfigure the ports to be in different VLANS.» VLAN per port does not confirm the 802. 1 q supported VLANS.

  -802. 1 q VLAN means you can mark the VLANS with 802. 1 q headers to create a trunk between two devices carrying frames for several VLAN. 802 1 q VLAN confirms that there are also supported VLAN per Port. »

  I knew by the sheets that the SLM224G supports 802. 1 q (tagged) trunking. So it should be, given the text above, also supports VLAN per port.

  My question is if it indeed will support VLAN per port?

  I am able to use it directly behind the router of my ISP and create two separate LAN?

  If so, a supplementary question: how are the PC behind the switch (inside the two VLAN) removes the ISP router IP addresses? It will serve only of the two LAN or do I have to install a DHCP server in the other LAN?

  Any information is welcome!

  Thank you.

  Mr. Bertrand,

  
  

  I read what you posted and I don't think the slm224g will do what your configuration you want to.  The reason behind all this, if you have installed 2 VLAN you will need 2 gateways for each network.  Since then just the ISP router and a network.  I'd get a router capable of VLANs and plug it into the router of the Internet service provider and then you can have up to 4 networks behind your router.  The rvs4000 is a router excellent gigabits, which supports up to 4 VLANS.  So if you need additional ports, you can get unmanaged switches and plug it into the router for added ports.