Update the reference in the structure of the event

Similar Questions

• References to cluster in the structures of the event?

  Hello

  I'm building a front panel with, say, a bunch of buttons/indicators in both groups. Inside a while loop, I had a structure of the event with two cases, one for each cluster, waiting for a change in the value of each cluster. I know which button has been activated by comparing OldVal, NewVal.

  Now, I want to generalize a Subvi comparison since I will soon add loads of button clusters. The Subvi I have managed to get to now me returns a string containing the name of the control that has changed its value.

  However my Subvi accepts only one type of clusters only and is not generalizable. I understand that this cannot even be done directly and I have to use control references to move inside my Subvi. But I can't create references of control for the two OldVal and NewVal clusters, only for the control on the front panel.

  So, how to create a Subvi, which returns me a string containing the name of the control with a different value between two identical groups of any type within a structure of the event?

  My LV version is 7.0 and I can't open most attachments on this forum, so I would appreciate your screenshot solutions.

  Here, you can code like this so that you will come to know what button was pressed.

  

• I have updated the references of the bank card and still get notifications of information with countdown, is this normal?

  I have updated the references of the bank card and still get notifications of information with countdown, is this normal?

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  https://forums.Adobe.com/thread/1962238

  To contact support - for the link below click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Update the Variable by ODI reference Variable MSSQL

  Hello

  I am currently trying to get the return code that returns an executable JAR file.  This jar file is successfully using the ODIOsCommand.  The problem I have is that when fails it JAR file I try to get the return code for control of flow after the process.  I can see the correct return code (10) when I check the ODI Agent after that that it executes:

  ODI-1217: TestJarExectution Session (304501) fails with return code 7000.

  ODI-1226: OdiOSCommand step 1 fails after 1 attempt.

  ODI-1241: Oracle Data Integrator tool execution fails.

  Caused by: com.sunopsis.dwg.function.SnpsFunctionBaseException: ODI-30038: OS command has returned 10

  My approach was to create a variable, and then have it refresh with the variable reference ODI - < % = odiRef.getPrevStepLog ("RC") % >.  I'm getting an invalid token ' < ' found when I try and update this variable.

  During this research, I came across discussion where someone against a SQL query an Oracle are - select < % = odiRef.getPrevStepLog ("RC") % > FROM DUAL.  The problem here is that we have no instance Oracle and MSSQL Server 2008.  ODI is also configured on a database of MSSQL Server 2008.  Is there anyway to properly update the variable with the getPrevStepLog using Microsoft SQL?

  Any help would be appreciated.

  Thank you

  Tom

  Hi Tom,

  Try the same approach but eliminate the FROM clause. For example, "SELECT <%=odiRef.getPrevStepLog("RC")%>". ». It should work under SQL Server.

  Kind regards

  Michael Rainey

• What is the best way to update the references to file after a move?

  I have a Photoshop Elements catalog picture with about 25 k images all pointing to a network share I call \\thehive. I moved, or sync'd if you want, all the files in the network share \\thehive on a drive of local storage for better performance, which is now located on P:\ drive. I intend to treat the P drive as my main drive that reads the catalog and use \\thehive network simply as a clone of the P drive that I intend to keep in sync with SyncToy. I have already all this configuration in place, the files are sync'd on the drive P and \\thehive, everything works as expected so far. But how to do to update the catalog so that it starts from the P drive instead of the \\thehive? A photo today points to \\thehive\2008\somepicture.jpg, and I need to point to P:\2008\somepicture.jpg.

  I'm a very advanced computer user, I could edit an XML file or do some advanced operations not supported if I had to. Would appreciate your thoughts and suggestions.

  The fastest way is to directly edit the values in the catalog.pse9db database.  The database is a database SQL Lite, so if you know (or know someone who knows) how to run SQL queries against a database, you have the chance because Adobe has done a great job of a highly normalized database schema design.

  I highly recommend this tent first on a copy of your database.  In general, the procedure goes like this:

  1. Add one of your images on the P: drive in the catalog.  This establishes a list for the P: drive and its identification in the volume_table table.
  2. Run a SQL query on the table of volume_table to see a list of all the lines.
  3. Note that the values in the column 'id' for your volume "the thehive" and one "P:".
  4. Run a SQL query on the media_table table to update the value of the id_volume column, replace all instances of the id number "the thehive' with the identification number of the reader"P: ". The SQL query will look something like this:

  Update media_table

  Set volume_id = "."

  where volume_id = "."

  I tested with PSE9.0.3 on Win7, changing the location of a CD on my E: drive on a USB on my F: drive.

  Good luck!

  Ken

• Iteration in a structure of the event on the subset of elements of control

  I have an array of boxes that I want to live inputs switch indicators.  I have two tables which cell values feed indicators.  The checkboxes indicate which table is routed.

  My options are:

  1. Make a giant list of nodes of property with the switches (30 + switch, subset, property of update)
  2. make a loop that repeats against a ring (or cluster), where the iteratable enumerates objects to watch ring + loop + 1Passez pressing sur-sous-ensemble-update

  The second options seems so much more elegant than the first.

  I think that the references will need to be more channels.  I can make chains in a cluster and iterate on the cluster.  I don't know if I can do a mass of object references.

  Issues related to the:

  • How a list of references to the inidcators that a loop is ready to go and change the values?
  • Is there any value (for the rest of the system) for me to set a delay time delay in the events of the while loop + structure?  Is it CPU free for other things if he timed it delays for the control of the event?

  Artem.SPb wrote:

  What is the Ref out of problem in table?

  

  In the case of all Boolean controls as you, it is fine.  You will have an array of Boolean references.

  If you had some Boolean references, some numerical values, strings, and built a table of these references, the table will be an array of more generic references.  So when you use the properties on them, they will simply say "control".  You will be able to work on properties that all of these controls have in common (e.g. activate or visible), but you wanted to do something more specific, such as the display of a digital format, you will need to know that your ctrlref is to a digital, then casting that make reference to a class more specific to a digital for more specific class properties.

  If it is to group references in a cluster, each item in this group will always be most specific type.

• Update the controls on the front panel producer consumer

  Hello

  I wanted to ask you a few tips.

  Usually, when I implemented a consumer producer I use producer to create items from queue whose state of the enum and pack all the necessary data in the process of the event in a Variant.

  Then the consumer does all the work.

  There are two areas where I feel that I could not be using the best approaches...

  (1) when I need to update a control on front panel I Pack a reference to this control on front panel in the variant in order to access the property nodes in the consumer and to update.

  I have attached photos with an example. It's simplified code where the user must perform a task of data acquisition in the analysis of certain parameters. The code increases the setting of a fixed amount to each race to help the user in its sweep.

  Is there a best way to do this?

  (2) when events require the same control to be plugged into the variant for the handling of the loop of consumer I create local variables or references to this control to other events. Would it be better to have a registry change that crosses the loop producer which gets updated values of façade at each time the loop iteration?

  Thank you.

  Because you use a loop of events such as the producer, I would use user events to update your controls.  This way you are not circulate references just to set/update a control.  You can make a user event and handle this event with the structure of your event.  Your client sends just the event with all the necessary data.  I found this configuration really useful since it retains all the GUI code centralized in a single loop.

• Add the occurrence to a structure of the event by using scripts

  Hello

  IAM trying to (using scripts) updating a structure of the event (the case of the event add) on a vi is not on memory.

  I get error 1054 the specified object was not found.

  Here's a picture of him.

  any help in this will greatly be apreaciated.

  The error comes from the open air, because looking for structure in the wrong place. While it is perfectly logical that the owner would be the loop in practice yet script is not that friendly - you need to get the reference of the schema of the loop and use it as an owner.

• Can I detect and handle an event already within a structure of the event?

  I have a VI that would do what I want, if I could detect and handle an event of second mouse click while I'm already handling a previous event (selection from popup menu).

  I hope that the picture is clear, but in words what I want is the following: I have first right-click on a chart and select a context menu item, which specifies a graphic manipulation of properties.  Often, this manipulation requires clicking on a second graph to get a reference (for example if I want to copy some of the properties of the first chart on the chart of the target).  It is, it means I'm trying to detect a second event already within a structure of the event.

  I think I could do with a state machine and some registers at offset, and if it's the easiest way, I'll do it.  I would be interested to know whether, if there is a way to detect and manage events 'nested' as I suggested.

  Thank you!

  Your code is not really that complicated.

  Yet, the problem is that confuse you it upward with the main state machine. I would use it in a small parallel loop that only manages events associated with the menu shortcuts. All this should be able to run in parallel in any event, even if the main loop updates the data in the chart at the same time, for example.

  I don't like the dialog box, it hampers the flow of work, but if you use it, use two button dialog so that the user can also cancel if necessary. Instead of the dialog box, you should just temporarily move the cursor on. I also do little to check before operating on the second graph of reason and give a time limit for the second operation.

  Here is a quick project to a more atomic shortcuts Manager. Modify if needed. There are probably bugs.

• I can't get the page numbers in my table of contents to update when I update the book.

  
  I use Framemaker 11 and I have two tables of contents in my book: one in English and French. Each table of contents to links to various documents in the same book. The reference page for each table of contents is defined and properly displays the positions 1 and 2, I said that it appears, but numbers not updated when the contents of my document files change to another page. I checked the settings of conditional text in my document files; they are correct. When I update the book, I choose to update the numbers, all the cross-references, all text inserts, OLE links, generate a Table of contents, lists, and indexes. What I am doing wrong? Thank you.

  If they are not knocked down, then they are certainly not generated files. See the example in the help of FM11: http://help.adobe.com/en_US/FrameMaker/11.0/Using/images/bk_hier_books.png

  The 'K' is a TOC file that FM recognizes a generated file.

  Because you have created your table of the contents of the French with the help of another structure of the book, you could import reference this TOC file in another file of FM (for example to create an inset text) in the main book you want. However, you need to make updates in two steps. First update the French book to revise the table of contents. Then update the main book to get the rest of the correct pages (and given that the table of french contents are imported by reference, FM always uses the most recent version).

• OBIEE 11g Patch. We need to update the RPD?

  I have a question. There are a lot of articles to patch OBIEE 11 g to the latest version. A few articles describe only patching process and I forgot the important step. This step is the upgrade catalog after patched and we can found in the documentation. But I can't find any reference for the upgrade of the repository.
  I guess if the BI server files then changes it may be the structure for the RPD file changes. We need to update the client tools for corresponding to the current version. So I think that we need to upgrade the repository file.
  Does anyone know how to do?
  Maybe patch process in automatic mode?

  When you apply a patch, it used upgrate the RPD.

  The upgrade of the RPD to ex: 11.1.1.5 to 11.1.1.6.2 is very simple open the RPD 11.1.1.5 using 11.1.1.6.2 Admin tool Client and save with Save as option, it does it automatically.

  Thank you
  Saleem.

• Update the BIOS on the Satellite 1900-803

  I just tried to update my bios on the recommendation of Microsoft because of reported serious CPU/bios conflicts.

  The routine bios flash downloaded seems to work well from the disk for about two minutes then suddenly shut the computer laptop everything without warning. The machine has restarted but only with a screen empty and not yet start either from floppy disks or hard drives.

  The front panel LED screen display the infrared icon in solid red without any Flash (there is no reference in the instruction booklet).
  I tried several keystrokes on re - boot from information obtained via google searches on the internet. None of them seem to make any difference. Supplied with the machine recovery CD does not work either re-boot when it is used with the recommended C more switch button power switch.
  I thought you are trying to reset the password using one of these parallel port fixers described on the net?
  Other ideas on a way forward?
  I guess that Toshiba offers no guarantee with their routines in the bios even if I lost a considerable amount of important data?

  Kind regards
  James

  Hello

  You are right. The guarantee only if no coverage of this misfortune.
  It seems that the laptop does not start because you have updated the BIOS with the wrong version or the wrong update procedure.

  Most of the time it's not easy to estimate what might be the problem.
  Maybe you are a lucky man and the BIOS chip be flashed only once again using a special procedure.
  In the worst cases, the jury is dead and you need a new

  Seems so you will have to contact the service technicians in your country.
  Ask guys for details and handling plus good luck

• using the structure of the event in the LabVIEW classes

  Hello

  I'm new in the use of LabVIEW classes, so don't know much how I can use them.

  In my main program, I have clusters with five elements in each. The elements are controls two States and in some groups, there are three States controls. The user will press the buttons (controls), and different things will happen. In my first program were I not using classes, I had a structure of the event and the controls were cases of event in the structure.

  Is it possible to somehow use an event of cases in one of the methods that is created in the classes, so that say, that's not in the main program?

  I have attached two photos: I wanted to have a structure of the event in servoTouchEvent (in left.tri.lvclass) who is a child.

  Let me know if my explanation is not clear.

  Grateful for the help!

  Hello

  Yes, you can have a structure of the event in a Subvi rather in your main VI of top-level UI. The trick is to use the 'Save for events' and passing in references to orders that you want to have the event trigger structure for. The refnum output since the function is entered in the terminal of dynamic event of the structure of the event who could live in a Subvi. You can add instances of event where you will see these control events as dynamic events then you can do something with. These excerpts from shows all the code in a simple diagram, but the stuff in the structure of disable diagram could easily transformed into a Subvi:

   

  All this can be done without classes. What will buy classes you include the ability to encapsulate your screws and also perform different code based on what object on the hierarchy of the parent-child classes is on a wire. If the behavior of your code is different between 2-3 State and controls (which I do not know what state controls 3 you are referring), you can take advantage of the classes.

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• How to merge the event structures?

  I have a program of VI script that reads a text file of records and displays a structure of the event.  It works very well because it creates all the controls and indicators I need associated with the defined registry and code backend (i.e. the structure of the event).

  After I generated all this code, I copy and paste in the main VI I develop.  Everything works very well.  The only problem is that there are 100 text files from separate registry.  This means that I end up with 100 separate event structures.  Although it works, it takes a lot of space and I prefer to combine them.  However, each event structure has anywhere from 15 to 75 entries, so to do this manually is not an option.

  Is it possible to selectively merge the event automatically structures?

  I guess I could write a labview scripting routine that could get a reference to the structure of the event in VI, then merge... but part of the problem there is that there are a handful of structures of event I want to separate them just because they are not associated with the set of registers, that I mentioned.