Share the dashboard without login

Similar Questions

• Unable to share the custom dashboard

  Hello

  I have the Version 5.8.2, build 1885282 od VCOPS company.

  It's the update from version 5.8.1.

  I created several dashboards customized in the version 5.8.1 I was able to share them between groups.

  But now in version 5.8.2 I don't see / have the share for dashboards customized button. All I see is:

  Dashboard tools: MODIFY REMOVE CLONE INTERACTIONS CREATE TEMPLATE EXPORT and IMPORT

  I'm in the band directors with all active access right.

  No idea what happened?

  Thank you

  Problem solved.

  The problem is connected to the web browser. Firefox and Chrome do not allow to share custom dashboards. Either a sharing option as there is no problem at all. Share - is the only one missing out of the entire line, and it became very confused to me. Login as administrator, Member of the Admin group, does not. The time I had to go to IE (which is very rarely as you can see) I was able to share the dashboard.

  Thank you very much for the help.

• Permanently remove the company from the dashboard

  What is the procedure to remove permanently to a company from the dashboard?

  The data manager has been removed for the deleted site and collection sections.

  I want to delete these quotas, not to hide them. Thanks,-Jeff

  Most of the time, I just saying make sure the collector has been disabled on site and then hide the assessment.  Something like this has been asked before:

  http://communities.VMware.com/message/1147651

  You can't really delete stuff from the dashboard without a ticket, and we don't really suggest it.

  See also the following kb:

  Put an end to an evaluation in Capacity Planner

  http://KB.VMware.com/kb/1007597/

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• SX20 without dual display capable to share the presentation?

  Hello

  I would just clear my doubt

  SX20 is without option of dual display capable to share the presentation.

  If I understand correctly the SX20 installation sheet

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/quick-set-SX20/installation_guide/sx20_quick_set_installation_sheet_for_web.PDF

  Connect your main display on the HDMI color blue.

  With the dual display option, connect the second screen to the other HDMI output.

  It means that I can still share presentation even without dual display option

  Best regards

  Titebiket

  Hello

  Yes, you need not dual display of the presentation.

  Marius

• I have 5 html pages that share a common header, footer and sidebar. How to use my navigation bar to change the content of the body without duplicating a lot of code?

  I have 5 html pages that share a common header, footer and sidebar. How to use my navigation bar to change the content of the body without duplicating a lot of code? Thank you!

  Read the help section of DW on models.

  Using Dreamweaver | Creating a Dreamweaver template

  Or use Server-Side Includes

  Nancy O.

• Delete the e-mail without login account

  Is there a way to remove the application Mail in Windows 8 email accounts, if I cannot connect to the e-mail account?

  As I understand it, the usual process to do this by going to the Mail application, by using the bar of charms, outputs represent, opens the account I want to delete and then remove them downstairs. However, I can not connect to a couple of e-mail accounts more and have the opportunity to request new passwords or access it again.

  With this in mind, am I could simply remove them from the application without logging in them? When I try to choose accounts, he invites currently connect with each other.

  Frustrating.  I said if you are in offline mode it will not be able to send this message, you see.  After hearing what I wish I told you to try this first.

  1. Close the Mail app W8.
  2. Disconnect from the internet (turn off WiFi, or unplug your network cable.)
  3. Open mail app.
  4. Click Services in the bar of charms.
  5. Click accounts
  6. Click on gMail ACCT.
  7. Menu should open as usual, make changes or delete acct, as you wish.
  8. If acct tries to always connect when you do this, start/stop and go back to step 3.
  9. Fact.

• Helps the copy of a cloning of a dashboard and adding columns to new dashboard without affecting the previous dashboard

  Hi all

  I am new to OBIEE and need help with the cloning of a dashboard so I can add more columns to the new cloned dashboard. I just want some assurance how to do this, because I don't want to spoil the previous dashboard because users still use it. I have looked everywhere for advice and could not find anything on this. It doesn't seem to be as simple as copy and paste it into a different folder...

  Thank you in advance!

  Hello

  It doesn't seem to be as simple as copy and paste it in a different folder

  Why not?

  It's just a copy/paste

  (the dashboard of course, not only the page you want to change).

  Of course if you links/actions in your dashboard they still link to the original as OBIEE use full paths and relative paths, so these will require to be edited and modified to your new copy dashboard where you have.

• Why change the background image of the dashboard of data crash the app?

  I'm changing the background image of my dashboard (on a third generation iPad).  Whenever I try to make the change, the data dashobard app breaks down just.  Even if I try to change to a color, the application crashes.  I can insert a picture without problem.  I guess it's just a bug or something but has anyone else seen this problem?

  I was able to reproduce this crash with the following steps:

  -Set up a background image of a page

  -Copy the dashboard somehow. You can reproduce the dashboard, share by email, export and re - import OR clouds, etc.

  -Open the copy of dashboard

  -From the copy, change the background image (for a solid color or another image)

  If you set a background image of a page, close and reopen your dashboard and then try to change the background to something else, you will encounter this error.

  Solution: If you have the original background image in your Camera Roll, you can fall as an image on the same page (Photo Palette, select in the library). Then you can remove this image and change the background also image.

  If you do not have the original image, you may need to start with a new dashboard. (For each page on the old dashboard, you can tap the bottom, select all, copy / paste on another dashboard).

  There is a similar problem with images removed, if you shared the dashboard and you work on a copy. In this case, the solution is to copy and paste the image before deleting. (Otherwise, you'll get a dialog error instead of an accident, but the image is not clear).

  I deposited cars for these issues internally. Sorry for the inconvenience.

• Cannot open the iMessage without wifi

  Strange situation. I have an iPhone and the iPad.

  I accidentally deleted some messages of iMessage for the iPhone.

  I have not turned on the iPad in several months, so I don't know the messages I deleted are always on the iPad. I want to recover the contents of these messages. The iPad has wifi turn off - it is in airplane mode, so it will not synchronize with iCloud and lose messages.

  However, when I turn on the iPad and go in iMessage, it appears a dialog box saying "sign in with your Apple ID to activate iMessage» But I can't go past it because the wifi is turned off. And if I turn it on, it will synchronize with ICloud and 'remove' these messages off the iPad also...

  Is there some way I can open iMessage without login or retrieve those deleted messages that are always on the iPad?

  FYI, messages are not synchronized with iCloud.

• Cannot share the SD as usb drive

  I'm under 1.1 on a fire of Alcatel filed. I enabled two options to share the sd card (which works fine) as a usb drive, but it does not recognize my computer (Debian). When I connect the phone, it creates an sdb entry in / dev, but without partition (sdb1).

  So far, the only way to achieve this is by issuing the command described here (http://yorik.uncreated.net/guestblog.php?2014=15), "Adding access usb to SD card" > step 5. I do whenever I plug in the phone, of course.

  Additional information:
  -The sd card works fine. I can use it on the computer with a microsd card.
  -The sd card works fine on the phone too.
  -J' have enabled usb drive and shared the sd card in the phone.
  -The page I linked indicates the partition should appear when I unlock the home screen, I have tried that but it still does not work.

  This has been resolved for me in rev version 1.1.0.0 01020.

• Two computers share the same wi - fi Modem. When A computer reads a message that is marked as read on two PCs, not allowing computer B see what needs to be read.

  Two computers share the same WI - fi Modem. When A computer reads a message that is marked as read on the two PC, not allowing the B to see what still needs to be read. Email is Thunderbird.
  Please help, thank you for this option online support

  I should add that if you operate the account using Pop then messages can be left on the server without any indication that they have been read. You define each customer to leave them on the server.

  However if you don't know what messages have been read, I know not how will you know which ones to delete and when to do it. Without active maintenance your server could quickly become full.

• Two tasks that share the same resource in sequence

  I'm the current exception "the specified resource is reserved.". I understand that you can not run two tasks that share the same resource at the same time. However, is it true that you can not run two tasks that share the same resource, one right after the other, without the eliminate completely from the first task?

  for example

  Task1 and task2 share the same resource
  
  Task1. Start();
  
  Task1. Stop();
  
  Task2. Start(); This will always throw an exception until you have a task1 (i.e. task1.) Dispose()?
  
  Task2. Stop();

  Hi cafarm,

  You're right, the fact to just stop at one task does not allow that run you another task with the same resources immediately after. That being said, you can start the next task without having to erase or dispose of the first by making use of the task status template DAQmx. As you can see on the next page, stop a task simply going to the State of "Clerks", which means that the material is still used by the task even if she does not actively.

  http://zone.NI.com/reference/en-XX/help/370466AC-01/mxcncpts/taskstatemodel/

  Instead, you can use the control functionality of task for the first task of transition to the status "verified" after stopping it, then start the second task. This keeps the parameters of the task without having to have the task, but it should free up resources to be used by other tasks.
  http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/verifycommitstartstopdaqtask/

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to share the Media Player library on a computer on the network

  Original title: network and sharing of library

  Hello!!  Why doesn´t my library of hole windows mediaplayer with music from my home computers appear on my networkcomputer I get only a tiny part of it

  Hi VivekaNelson,
   
  -What is the operating system that runs on the computer on the network?
  -What version of Media Player is running on your computer at home?
   
  If you use Windows Media Player 11 for Windows XP, follow the steps in the article below and check if you can share the library together without any problem.
  Share your multimedia files

• How to remove the user account from the connection Start Page (therefore restart goes directly to the desktop without the need for any clickthru)?

  On my Windows 7 Home Premium SP1 64-bit system, all I had to do was to remove all the accounts (other than 'administrator') in addition to my login information main user account and remove the password of the Admin account and I use a main user account, and then whenever I reboot, reboot goes all the way to the Windows desktop (i.e. through it does not stop with a cover page showing the user account).

  -It does not seem that this approach works for my Vista SP2 Business Edition 32 bit.  In fact - I get TWO accounts of user with the exact name even appear (my account "DougL12"), as well as the "Administrator" account  None of these accounts have passwords (I can just click on one of them, which brings up a screen to enter a password, then click again without entering any PW, and then I get thru on my desk).

  When I go to 'User accounts' control Panal and select 'Manage another account', windows displays a screen showing three accounts:

  (1) "Guest" (power off);

  (2) "DougL12" (hey I am running, whose B-T-W has privileges admin; also do not have a password); and

  (3) 'administrator' (which, if I choose only, is not an option 'disable', although it has not one)

  (password).

  NOTE: page does not display "" versions of the user account "DougL12", although the login screen that is telling.

  so:

  (1) what do I do to eliminate the appearance of user accounts / Login Screen (i.e., default to my main user

  Account, "DougL12" and should not click)?

  (2) any thoughts as to why the system could be displaying two Occurrences of the user account Login "DougL12" on the

  login screen?

  Hello
   
  I would like to suggst you follow link which can help you solve your problem below:
  Turn on automatic logon
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-on-automatic-logon
   

  See also:

  Enable and disable the built-in Administrator account
  http://TechNet.Microsoft.com/en-us/library/cc766343 (WS.10) .aspx