shared network folder error

Similar Questions

• I need to put in place a banner with a warning of safety or warning, to open whenever the shared network folder is accessible.

  I need to put in place a banner with a warning of safety or warning, to open whenever the shared network folder is accessible.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums

  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

• How can I lock a shared network folder.

  I want to know about the network folder, how can I lock a shared network folder.
  Actually I'm under small network at home and I want to share some files, but I also want to protect files, no body, no go without my permission.

  Waiting for your response.

  Thank you
  Tauseef Ahmed

  Hello

  Adding futher to Wunders his Adviser.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  
  

• ScanJet Enterprise 8500 - impossible access to a shared network folder

  Hello all,.

  It is my first post, so be nice.  We just purchased and installed a HP Scanjet Enterprise 8500 fn1 and immediately updated the firmware to the last, and we are able to connect to the scanner via the http interface.  We can ping it as well, so it is clearly on the same subnet.

  We have a very small private network of workstations Windows 7 64 bit and no central server, and that is why we do NOT use a real domain, only a working group.

  I tried many permutations using the name of working group (in the domain area) or leave it empty and I know that my name of user and password are accurate, but quite simply, the scanner does NOT connect to the shared folder.

  In addition, although the path of the folder seems correct, that there is a 'space' in the name of the folder, whatever?  for example, the name of \\workstationA\folder (there is a space between the file and the name), however, because I don't get any error message I don't know what to attribute this fiasco to.

  Any ideas on why this is happening and that we can use this scanner without a DC on a real Windows Server?

  See you soon,.

  SOLVED

  I finally could get the HP Scanjet to work with a shared folder by following these steps...

  • -Firstly, I gave up the idea of using a specific user who has accessed and created a shared folder, and EVERYONE has read/write access.  Since it is a small private network, and it's only for this particular file, I was ok with that.  In addition, if you opt for that route as well, just know that the you MUST fill in the domain, the username, and the password, even if the input data are bogus.
  • Second-, I have completely abandoned using the user-friendly name of the UNC path folder and opted for simply using the IP address, which has accelerated the process.  \\192.168.1.123\FolderName
  • Third - I made sure that my folder name had no spaces inside.  I don't know if this has no effect on the problem, but I decided to not play with names that had spaces because HP does not give usable error messages.

  I might have to open another thread to address WHY the software on the HP Scanjet 8500 is so incredible slow.  After that it scans a document she spends literally 4-5 minutes in "editing" mode before you send the file to the server.

  Anyone has any ideas on this part?  Also, who can mark this topic as RESOLVED?

  See you soon,.

• Shared network folder is not updated to display files, network working group on Windows 7

  Hello

  We have a user of Windows 7 which is a shortcut to a shared folder is shared from another computer on Windows 7.  The record is "analyses" scalled and is distributed on several machines.

  When the customer scans a document with their network scanner, it writes in the form of pdf files in the folder of scans.  All users are able to access the files in this folder no problem except one analysis.  The user meeting the problem does not see the files, even after pressing F5 to refresh, but other users can see and open the files correctly.

  I don't know why on this laptop special that "scans" folder in network is not refreshing.

  Thank you for all the advice!

  Hello

  Is there a delay in the display of the files in the folder "scan" or it is not visible at all?

  Try to re-create the network shortcut and check.

  Please come back with more information so that we can help you better.

• I had problem with the server's shared network folder to my laptop

  I had connected to my laptop network but the problem is that ion for the shared folder server data network didn't show my laptop but show my office so can any one please help me

  Hello Maury,

  Welcome to the Microsoft Community Forum.

  To better understand the issue and to get to the root of the problem, I should be answering this question.

  These computers are connected to the domain network?

  If Yes, then the question you posted would be better suited in the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Windows Vista has not saved password for shared network folder

  Whenever I try to open any resource on our network, it always ask password click even RECORD on several times. I checked in the credentials manager, there is no password is saved and I tried to add the IP network to share resources, but also has not worked

  Hello
   
  1. who is the edition of Windows Vista installed on the computer?
  2 you get an error message when trying to access the network resource?
   
  Please, try the following steps and check the result.
  1. click on start, type control userpasswords2 and click on enter.
  2. on the window user accounts, on the users tab, click the Add button and add the details of the user.
  3. click on the Advanced tab on the window user accounts, and then click manage passwords.
  4. click on the Add button, add the details and select the type of credentials according to your requirement.
  5. apply the changes and check the result.
   
  Visit this link for more information on "Troubleshooting network connection problems":
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• HPOfficeJet Pro 8630: Scan to network folder fails

  I have recently reinstalled Windows 7 without password on my computer, although the previous installation did use a password. Now I can not scan to network folder (error message that the user name or password is incorrect), or save faxes on my computer. (error message that there is no communication between the computer and the printer). I checked the windows firewall, I restarted the router, printer and computer. I use an Ethernet connection to the router.

  Hello

  First of all ensure that protected by password sharing is disabled for your operating system, otherwise it will fail:

  From the Control Panel, under network and Internet open the network and sharing Center.

  Ensure that the network type is displayed as a home or work network, if it is listed as Public network click on it and select home or work.

  In the left pane click on change advanced network settings and select turn off password protected sharing.

  Search for now any change.

  If you have problems to right click on the Shared folder, and then select Properties.

  Ensure that the folder is shared as sharing.

  Click Advanced, and then click permissions and ensure that your users have all permissions to this folder.

  Hope that helps,

  Shlomi

• OfficeJet 8620: Error using scan to network folder - although the EWS test demonstrates the success

  I have configured the 8620 via the integrated Web server for scanning to \ \Scans < ip address of my macbook > the 'test' function's successful return.  However, when I run a scan to network folder in the control panel of the printer, I get the error: "cannot write in------< ip address > \Scans.» Destination folder is read-only, has the wrong permissions, or is no longer available. "I don't see how that's possible given the test of EWS.  I confirmed that the file is read-write for all.

  Hi @tfeeneytx

  I see that you have taken the lead and sent the scan to network folder problem you encounter as you mentioned that you on your previous post. I'd be happy to help you with this also.

  Please use the following document to ensure you have the analysis of the configuration of the network folder correctly; Scan from the control panel (including the Scan to Email, in PDF format, and to a network folder) for Printer series e-all-in-one HP Officejet Pro 8610, 8620, 8630, 8640, and 8660.

  Please also ensure you have the latest update of the firmware for the printer; Update of the Firmware 8620/8625 e-all-in-one printer Officejet Pro HP.

• Error messages HP 8600 Officejet Premium network folder Setup using Mac OS x 10.6.8 - HELP!

  I'll implement the Officejet HP8600 premium and I'll have hard set Setup of network for the folder. I'm following the steps, but to continue to get the message, it is an invalid part when you enter the IP address MacBook Pro. If I remove the IP address and then enter the name, I get a connection failure message. Is someone can you please help me understand this?

  I'm upgrading from HP8500 predecessor to the successor. Unfortunately I had problems with the network folder using the 8500 after I've had it for 2 years and HP suggested to upgrade to the newer model.

  HP Officejet Pro 8600 Plus e - AiO Printer N911g model CM750A

  Operating system: MAC OS x 10.6.8

  Hello

  If please try following the steps below and let me know if this is useful:

  1. Create a new folder on the desktop.
  2. Right click (or CTRL + left click on the Mac keyboard) the folder and select information.
  3. Under sharing & permissions, verify that your user name is listed with writing & privilleges.
  4. Click the Apple icon, and then click System Preferences.
  5. Click sharing,
  6. Check and select the file sharing service.
  7. Under shared folders, click the plus sign and select the folder.
  8. Under users, select your user name as read & write. If your username is not listed, click the plus sign and Add.
  9. Click the Options button.
  10. Check the option to share files and folders using SMB (Windows) .
  11. Check your username as on.
  12. Open Safari and click on the bookmark icon.
  13. In the left pane, click Hello and double-click the name of the printer.
  14. Under the configuration section, click Fax to Email/Network (for Fax) folder or configuration of a network (for scanning) folder. confirm an alert.
  15. Follow the steps by providing the user name and passowrd for your Mac OS user.
  16. Fill the Nwtwork path as \\IP Address\Sharename (the name of the folder).
      Note: For you can find the IP address of the Mac by clicking the Airport icon and then open network preferences.
      The IP address is listed under Ethernet (wired) or Airport (wireless), depanding on your Mac connection.
  17. After completing the wizard by your needs click on Save and test.

  Please let me know of any changes,

  Shlomi

• Error with deleting the PDF file opened in preview only pane on the shared network drives

  I have a problem within Windows Explorer, I file open with say dozens of PDFs I have the preview pane open so I can tell what was on the pdf file selected without fully open. After you have determined whether I need it or not, I'd go for delete the file. However, with the file selected and preview pane, you can not delete the file gives an error message saying: the file is already open and cannot be deleted.

  I found that this happens on users with Windows 8.1 and Windows 10 machines at my place of work with different versions of Adobe Reader and Acrobat. Main versions being Acrobat 9-10, drive DC 15. Also only on the product on shared network drives, local hard drives are not the issue.

  Also, I installed another PDF reader and do not have the same problem if I put it in the default PDF Viewer. Leads me to believe that the problem is with the Adobe programs and non-Windows. I want to continue to use Adobe since I have a lot of licenses of Acrobat. Turn off the preview pane is not an option for my end users, since the amount of PDF files that they go through in a day is quite high.

  Please notify.

  I'm sorry. I'm all out of suggestions. There may be others somewhere that I saw but patches are usually

  1 turn off the preview pane

  2. use shift-delete

  3. remove the drive and use another pdf reader

  Seems that MS and Adobe have a hard stop at this time. And as I mentioned earlier, we had this problem on our drives to network with other files. Even the products Ms.

• Cannot install "analysis to the configuration of the network folder.

  I have a HP Office Jet Pro 8600. I'm a network using a router and an ethernet cable. I am connected to a laptop running Windows 7 IBM. Printing works fine on the network. Scanning works fine on a USB device. My problem is when you try to configure the scanning of documents to a network folder. When I run 'save and test' I get the following error...

  Error. Your printer cannot connect to the server. Press 'Back' to correct the server name and address. Make sure that the network discovery and file sharing are turned on. These settings are in the network and sharing settings in the Windows Control Panel on your computer.

  The directory is not set to read only.

  The network discovery and file sharing are turned on.

  I'm not using Norton Antivirus.

  Can anyone help?

  NJU salvation,

  See pages 53 & 54 of the user guide.

  http://h10032.www1.HP.com/CTG/manual/c03026243.PDF

• OfficeJet pro 8600 + scan if there is no configuration for the network folder

  The printer is wireless to my router and I connect to a computer connected to the router with an ethernet cable.  The computer is running Windows 7SP1 Home Premium 64.

  During the original installation of the printer 3 days ago, I used the wizard set up 'scan to a network folder' a record 'scans public '.  He created the 'profile' correctly and worked well the first time I scanned (I scanned the 3 or 4 times with different tweaks to experiment).  However the next day it no longer worked error on the printer was, 'could not connect to \\Computername\Public scan. Check that the remote computer is on. "Obviously, the computer was on, some communication problems only happened from one day to the next day, he was sitting unattended.  Hmmmmm.  Note that the option "Scan to Computer" works very well, so communication is simply no "scan to network folder" option and I really want to scan to a network folder.

  I went in a private "Scans" folder on my account and created a share as 'DadsScans', creating permissions and following all the tips I've come across so far.  Then I tried many times with the wizard to create a new configuration in the profile and all have failed and yes I found the network and turned on file sharing.  Also remember that it worked fine the first night?

  I tried to enter the local path to the folder (C:\users\dad\My analysis) with a share name (DadsScans), but the error message after choosing the option "test and save" was, "error.  Your printer cannot connect to the server.  Press 'Back' to correct the address and the name of the server.  Setting is not saved. »

  I then tried to enter the share name directly in the path of the network folder, like "\\computername\DadsScans", but the error was "error.  Your printer cannot connect to the server.  Press 'Back' to correct the address and the name of the server.  Make sure that network discovery and file sharing are turned on... "Note, I also tried,"\\computer Address\DadsScans IP"and got the same error.

  Finally, I disabled my firewall and my anti-virus in real time and tried again and got the same error messages.

  Once again, my network discovery and file sharing are on and it worked fine the first time I've used suggesting that everything was fine.  What happened during the night, so that the printer and computer sitting idle?  I've changed NOTHING!  Any suggestions would be greatly appreciated!

  Well well, after several hours of attempts to solve the problem, the 'light bulb went on!  The night after that I configured the "scan to network folder" option, we had some difficulties with our network so I reset our modem and DSL router.  Who cleaned the problems of network with devices.  It is apparently broke something with the communications between the scanner and the computer.  A simple re-start the computer tonight and wa - la, the original public scan I configure worked again and I could create new profiles of "scanning to '!

• OfficeJet 8500 A909g: Installation problem scanning to the Officejet 8500 Wifi network folder

  Hello

  For hours, now I'm trying to get my printer to scan to network folder to work, but it won't be fair! The printer is connected wireless successfully.

  I'm in the menu of configuration (via the browser)-> Scan-Digital Filing-> Configuration of the network folder and informed all of the required fields:

  Network path: \\192.168.178.15\E:\Dropbox\Scans OR \\Maarten\E:\Dropbox\Scans HP printer HP

  Also tried in a shared folder on the network: \\MAARTEN\Users\Maarten

  Username: [my Windows user name]

  Password: [my login password]

  But I still get the message: username or password is incorrect. Make sure that the user account and password are valid.

  Can someone help me please? Thank you.

  Maarten

  Well, I guess I'll just answer to myself that HP is busy doing other things (fixing their crappy software and customer support maybe?).

  I fixed it myself afterwards, even if now I get this error scanner TWAIN or something. Not worth more, HP is at the door!

  Tip for HP: focus more on consumers and windows not only companies and do something for your software!

  Thanks for nothing! you want to fix people crap HP? It is best to throw it out the window!

• M277dw MFP: MFP M277-DW Scan to network folder

  In the settings of the printer - tab analysis - scan to network folder Option. I tried to capture the information of folder in smb and afp format. None is accepted by the printer. Can anyone help? Note that this is to connect the printer to a shared folder on a MAC

  Thank you

  Hey @Hopflys, welcome to the Forums of HP!

  If I understand correctly, you configure the scan to network folder and despite your efforts, shared folder information is brings not accepted. Please take a look at the following post, written by @Gemini02 , as well as the steps to configure the feature described and easy to follow: Re: configuration of scan of file.

  If you need assistance, I would like to know the results of your efforts and I will do my best to help. If this solves the problem you are experiencing, please be sure to click on the I accept as Solution button below so that others can see what has worked for you.

  Thank you.