OfficeJet 8500 A909g: Installation problem scanning to the Officejet 8500 Wifi network folder

Similar Questions

• Installation problems after upgrade the HDD on Satellite Pro A120 (PSAC1E)

  Hello

  I've recently updated my Satellite Pro A120 with more memory and a larger hard drive. The memory I installed is 2 x 1 GB Module (DDR2-667) and the product number of the hard drive is MK2035GSS.

  My computer recognizes both of these upgradges, but since their installation I was able to install all applications (for example Norton Security etc) on my laptop - they seem to spend 1/2 to 3/4 of the way in which the installation process and then just quit smoking and become insensitive or an error message appears. I even tried to put the product recovery disc to try and erase everything and start over but even that does not load in entirely. Any ideas of what could be the cause? Also, I get messages of constant error on the screen and it blue screens and restarts frequently.

  If anyone has any ideas on what could be the cause, I would be extremely grateful for any help!

  Thank you very much

  Cblack

  Post edited by: cblack

  Hello

  just a question, than to the manufacturer that are the memory modules? And similar modules? Or do you have that you have installed other modules later.
  We can exclude the HARD drive because it doesn´t HARD drive installed. they do not cause bluescreens or similar. In very rare cases, the disk HARD COULD cause errors, but then the pladder or BSOD´s must be REALLY damaged and in your case, the HARD drive is brand new.

  It might be, that memory modules are not compatible with your machine. To avoid these incompatibility issues, you must use the modules of well-known such as kingston and toshiba brands. (I'd rather kingston, they work like a charm in my A100 Sat :))

  Would appreciate comments on your part.

  See you soon

• IOM installation problem: configuration of the Bootstrap area

  I get the following error message during domain created using the config.sh file:

  Domain bootstrap configuration:

  Creation of domain: error creating cause domain: error error wlst.

  I found the following message in the log file:

  _ [2013 10-24 T 20: 06:11.996 - 05:00] [as] [PATH] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000K7h9Pm2Fw000jzwkno1IQSD6000003, 0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM EVENT CONFIG] onConfigurationError-> configGUID cd1b93d2-c6f1-472b-b734-f7a0aa113977 [2013-10 - 24 T 20: 06:11.996 - 05:00] [as] [PATH] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000K7h9Pm2Fw000jzwkno1IQSD6000003, 0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM EVENT CONFIG] ErrorID: 35082 [2013-10 - 24 T 20: 06:11.997 - 05:00] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000K7h9Pm2Fw000jzwkno1IQSD6000003, 0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD [: onConfigurationError] [OOB IDM EVENT CONFIG] Description: [[error created/u01/app/oracle/mw_home/inventory/user_projects/domains/IDMDomain. Cause: A WLST error has occurred. Action: Check the logs for more details. ]]

  ____

  Can someone help me please?

  WebLogic version is 12 c (wls_121200) and IM version idm_linux_11 - 1.1.1.7.0_64. 6.4 Linux

  Connection 12 c oracle WebLogic Console Administrationduserveurdu Logo works very well. http://weboid.localdomain:7001 / console (Server Admin). Now I try to install IM and got the above mentioned error message. Kindly help me.

  I solved the problem after unconfigure and set up the domain. Thank you all for your response.

• ESX 4i + installation problem [crashes during the spin of stage.tgz?]

  Hey,.

  I have a HP DL580 G2, and I have some weird problems during the start-up phase of the cd. It follows the usual sequence of decompression .tgz various events? files and then stops on one and hangs... I left for about 2 hours and nothing. The dvd is ok boot on my laptop, and I exchanged the disc in the machine with an another dvd - rom. The machine was running 3.5 previously without problems. Is there a switch I missed like noacpi or as I write at startup?

  I'll take the exact file it hangs on tonight, I just wanted to see if anyone had a suggestion in the meantime?

  Thank you

  Jonathan

  You can check it out here - http://processorfinder.intel.com/

• Installation problem after replacing the motherboard

  Hi all

  After downloading and installing PremierePro through the creative cloud using ADM, I had to change the motherboard of the computer.

  At it again - Photoshop and illustrator are working well but PremierePro is nowhere to be seen.

  ADM, said the program is installed and so allow me not to repair or re - download.

  I found AdobePremierePro.exe, which I assume to be the launch of application program but when run I get system error - the program cannot start because exrces - c_3.0.dll is missing on your computer.

  Any ideas on how should I proceed?

  Thank you

  Mike

  See if the following can help:

  http://pcsupport.about.com/od/findbyerrormessage/a/libgdk-Win32-20-0-DLL-not-found-missing - error.htm

  If this is not the case, try Google search using terms that you identified ("lack of exrces - c_3.0.dll") and see what remains is available about this error.

• I had problem with the server's shared network folder to my laptop

  I had connected to my laptop network but the problem is that ion for the shared folder server data network didn't show my laptop but show my office so can any one please help me

  Hello Maury,

  Welcome to the Microsoft Community Forum.

  To better understand the issue and to get to the root of the problem, I should be answering this question.

  These computers are connected to the domain network?

  If Yes, then the question you posted would be better suited in the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• problem by sending the image (.jpg) in the regions of wifi network

  
  

  no response from the body, okay, I got solution my self.

• HP Deskjet 3055A: connection Deskjet HP 3055 has to the University (eduroam) wifi network

  Hi, I tried to connect the printer with the wifi of the University network. But on the results of the diagnosis, it is said that more than one access point/router wireless was found which corresponds to wireless network (SSID). The results of the diagnosis, it says "no filtering" FAIL. And the IP address, configuration source are "not applicable".

  I can't even add "wireless printer" of the "control panel".

  Could someone help me solve the problem please?

  Kind regards

  Ze

  Hello

  First the first place you need to talk to is the it Department at your Uni. And secondly I would normally not connect my printer to this environment, I'm not asking people to use my printer. You can try to connect directly or use USB.

  http://WWW8.HP.com/au/en/ads/mobility/wireless-direct-printing.html

  Kind regards.

• LaserJet MFP M177fw Pro: M177fw can scan over the network

  Hello

  I would like to know if the printer permissions 'M177fw' to use the scanner to a pc connected via LAN. (based on analysis of the computer or send the scan from the printer to a network folder)

  I found this information on the manual.

  Thank you

  Hey @mariwf,

  Yes, if you have the printer connected to your wireless network, you can scan all the same that you would be using a USB connection. You don't have to use the built-in Web server, you can open and use the HP scanning software.

• Update the offsets of wifi driver WiFi Ralink 802.11 adapter problem b/g/n after Windows 8

  Hello

  I recently experience this terrible problem with my Wifi, everything used to work fine until a recent Windows 8 update (I don't remember which exactly) because I thought that the problem is related to my antivirus or I need to reinstall my windows because its gets lag

  The problem is that the Dungeon of Wifi that come and go, which causes terrible lag and crashes when I try to play games online such as Dota2 or other

  Please check this picture: http://i.imgur.com/U0Ns0Yw.png

  the photo shows the behavior of the Wifi during an online game, it continues to go up, then down to ZERO (here when he lags behind in the game) then reassemble and so on

  I tried several versions of the driver already installed later did nothing, installed the older... still nothing works.

  Notes:

  -the problem is not due to my router, I checked with my other PC and it work perfectly without delay whether

  -my laptop is a HP Pavilion 2212ek g6

  -Currently, I installed the latest version of Ralink 802.11 b/g/n WiFi adapt Driver 2013-04-27, Version5.0.25.0

  -My wireless card is: Ralink RT3290 802.11bgn wifi adapter

  anyone with the same problem as me? anything to solve this problem? Help, please!

  Thank you very much

  Hello

  I think that I sloved the problem, after a morning of messing around with drivers and reboots

  the trick is to go to the

  1 - Control Panel

  2 - Click on hardware and sound

  3. in the devices and printers click on 'Device Manager '.

  4. in the "Device Manager" click on "network adapters" then right-click on the ralink 802.1bgn wireless adapter, then click 'properties '.

  5 - go to advanced

  6 choose the sensitivity of homelessness

  7 - change the Disable value

  that worked for me, hopefully it do the same for you

• HP laserjet MFP CP3530, I can't get this baby to scan to a server or workstation a folder

  I have a HP Color LaserJet CM3530 MFP and so I can scan her machine, I installed a network folder. The Wizard indicates that the folder has been set up and the computer and the printer have been configured.  When I try to scan, the printer cannot find the path to the file and I get the error in the subject of this message.  I rebooted and tried everything I can think of. any advice out there? Wish some instructions... Thank you...

  David-

  P.S. This thread has been moved from Laserjet multifunction and all-in-one. -Hp moderator of the Forum

  Don't know what you mean by subject of this message. Generally, you must use the syntax \\computername\drive\folder. In other words, you need to share the drive and the folder that you use. Example, if you have a wealth of computer name and a folder called scans on the root directory of drive c, then the syntax would be \\mine\c\scans

• BlackBerry Torch 9800 smartphones does not detect the wireless Ad Hoc network

  I try to connect my Torch 9800 for the ad-hoc WiFi network, I put in place on my Windows 7 PC with Internet sharing.  However, the torch does not list even the SSID in the list of detected networks.  I confirmed that the network Ad - Hoc on Windows 7 is in mode ' Waiting for Users ' and the torch can detect other networks nearby.  I tried clicking on "Other ways to connect" and manually enter the SSID, but it still doesn't work.  I've also confirmed that other devices (an another laptop Win7 and an iPad) have no problem connecting to the Ad Hoc network and Internet connection sharing.  Any ideas?

  * AT & T wireless

  * Bundle version 6.0 267

  Hi and welcome to the forums.

  I'm sorry to say that for safety reasons RIM disabled their devices to connect to ad hoc networks

  I know that his frustration... Sorry

  Good luck

• OfficeJet 7612 - scanning in the Yosemite Mac problem

  Hello

  A few days ago, I bought an all-in-one OfficeJet 7612 and from the beginning I am not be able to scan to the computer (only to emails or usb).

  It's what I've tried and I get:

  1. Install the drivers and full software from the CD provided with the product: It appears to turn on the option scan to the computer . But whenever I try to do, a message in the iMac says: could not establish a connection with the printer.
  2. Download the last update on the HP driver support site: He always says that to computer scan cannot be enabled, and that I should download and install the latest driver.
  3. Installation using AirPrint printer: It recognizes the printer and even the fax feature, but never the scanner.

  I don't no what to do, it looks like there is no full support for my 7612 in Yosemite.

  Can anyone help me?, I'm doing something wrong?

  OK, I managed to do this work, that's what I did:

  1. Uninstall the HP driver through the uninstall program that comes with it.
  2. I deleted these two files from the: < youruserhere > /Users//Library/Preferences
  • com.apple.print.custompresets.forprinter.Officejet_7610_series.plist
  • com HP. DeviceMonitor.plist
  1. Restart the iMac (I don't know if that helped, but I did anyway).
  2. Install the printer using AirPrint.

  I deeply thank RnRMusicMan who was helping me through all this time trying to make this work.

  I hope this can help someone who found this problem too.

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• OfficeJet 8500 activate the scan of the computer

  Just installed this on a Windows 7, x 64 computer. I find no 'enable Scan to Computer'. He is not on any menu. I can actually find the .exe that would do the job, but it must be called with the correct settings. It is not a GUI program.

  I did the installation with the CD that came with the pritner, versions both network and usb. Scanning the computer works, but I wan the Scan from the printer to the computer to run.

  Hi broosth,

  OK, after testing this scenario, I found that you must double click on actions to scan, and then you'll see the option to activate scan of the computer. Let me know if this solve your problem?