Sharing a CF pool among the guests: how? GFS, something else?

Similar Questions

• I have a laptop 214dx CQ60. I want to upgrade the processor in it something else.

  I have a laptop 214dx CQ60. I want to upgrade the processor in it something else. I read on the Internet it is possible to replace the processor too long you will find the right socket, power, processor etc. Is there a list out there which is compatible with the laptop I have? I was hoping to find a processor that will consider a dual-core to a core2duo machine computer. Thanks for any info you can give me!

  Thank you for your help. I'm looking to an improvement in the operating system memory/too, so that the processor could do the trick. Was probably go Windows 7 64 bit at the same time. Thanks again.

• Do not see the shared folders under one of the guests of WinXP

  I host with Windows XP 32-bit and VMPlayer 3.1.2.

  There are two comments the two Windows XP machines with the same version of VMWARE tools. All guests parameters are the same. But we shared the host and second file access does not work.

  Any ideas?

  TIA,

  Vitaly

  Have you already tried to uninstall/reinstall the VMware tools?

  Maybe the HFGS (VMware Shared Folders) service is not installed properly. What do you see in the registry under

  'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order '?

  André

• How to replace the 'lock' button in the menu start into something else, for example, the button 'restart '?

  I don't use is the "lock" button because I use my computer only for home. However, I also have the button 'restart' for show because my programs freeze sometimes and I need to save data in this way. I need to show instead of the "lock" button Is this possible to do?

  Here is the tutorial to remove the option of locking, unfortunately it will also remove the option to switch user:
  http://www.Vistax64.com/tutorials/120510-lock-switch-user-add-remove.html

  I'm not sure the option "restart". I have Vista Home Premium SP2 and restart option is present in the start menu.
  What operating system do you use?

  t-4-2

• Change the Expression out to something else

  Hi all you clever friends!

  How can I go on "swopper" the result of an expression so he substitutes the result in a friendlier response:

  Example:

  @{N = 'Tools version status'; E={$_. ExtensionData.Guest.ToolsVersionStatus}}

  The above will display a response like: ToolsCurrent or something like that...

  I want to say 'OK' (my own friendly name)

  I saw somewhere that you can replace the output with your own 'response' based on this out. I don't know the syntax on how to do

  Any help is (as always) VERY much appreciated! Sorry if I have not made absolutely no sense at all :-)

  Thank you all.

  You can change the output to the scriptblock after 'E ='. For example:

  Get-VM | Select-Object Name,@{Name="Tools version status";Expression={
    Switch -Expression ($_.ExtensionData.Guest.ToolsVersionStatus) {
      "guestToolsCurrent"      { "OK" }
      "guestToolsNeedUpgrade"  { "Not OK" }
      "guestToolsNotInstalled" { "Not OK" }
      "guestToolsUnmanaged"    { "Not OK" }
      ""                       { "Not OK" }
      default                  { "Not OK" }
    }
  }}
  

  Best regards, Robert

  Post edited by: RvdNieuwendijk has added the default line to the Switch statement in the script.

• Brand new Veer does not update the app Catalog or something else

  Hello

  Got a new at & t Veer (it was already unlocked), after have logged you in my existing profile, the phone came, but the App Catalog, has not been able to update itself as well as other applications.  Some of the suggestions in the forum to change the date to July 1 and force the update via the App Catalog, but it did not.  Clear and reset the phone, still didn't work.

  WEBosdoctor'ed the phone and it still has not installed the update (failed).

  Call in the experts to see if there are any other technique not too complicated to solve the problem.  WebOS is 2.1.2.

  I have seen one that required some hacking of level intermediate directories for reset the certificate, but a bit too risky for my basic skill level.

  Thank you!

  After scouring the forums looking for similar problems, I put on one track
  what I was living for:
  - http://forums.webosnation.com/hp-touchpad/325422-app-catalog-certificate-update-failed-2.html
  
  Thanks to the efforts of SideshowBob84, we have a solution to this problem.
  
  Despite the solution published HP to change the system date to 1 July 2013 and
  Download the update from the App catalog and install it, it still doesn't work.  It may have previously
  worked, as others have pointed out, however, since September, it appears something has
  changed and this solution is no longer valid.  Perhaps the server certificate has been
  compromised regarding WebOS and not corrected since.  HP may not be up-to-date
  of the problem.
  
  However clever mind in the WebOS community have a solution.
  
  When an update or installation of the App Catalog is requested, that a ".ipk" is downloaded.
  and then installed on your device, then the international prototype of the kilogram is deleted in your download folder.
  Very clean and hygienic when it works correctly.  When it's not as here all the
  evidence is erased, and we do not know what happened.
  
  GMMan, created a process and a patch that comes in the installation process and
  keeps ipk so that it can be installed by PreWare.  In this case, we want to download the
  Update Catalog App, but when he moved, we use PreWare to the action.  Times
  the update has been installed, you should be able to use the App Catalog without
  incident.  The following link leads to the solution of GMMan:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  Its a bit technical and a white knuckler couldn't for some.
  
  I'm not a neophyte, but I don't know where near technical competence are the guru.
  But I'll try and simplify the process in an easy to understand the document.  Before entering
  started, here is an inventory of the software solutions you need:
  
  Also when you download these solutions, remember to give what you can!
  These people put out there for the benefit of all.
  
  WebOSDoctor - this tool will reset your Veer to the conditions of the factory, he must get
  messed up.  An indispensable tool for any owner of WebOS.
  - http://www.webos-internals.org/wiki/WebOS_Doctor_Versions
  
  WebOSQuickInstall (WOSQI) - Gift of Jason Robitaille to the WebOS community for
  install PreWare, Homebrew applications and patches on WebOS devices.
  Absolutely essential and easy to use.
  - http://forums.webosnation.com/canuck-coding/274461-webos-quick-install-v4-5-0-a.html
  
  PreWare and Internalz Pro - Tools used for research of the ipk and patches loaded on
  a device.  PreWare will apply the patches on your device.  No need to download
  as WOSQI can find these ipk for you and install them.
  
  NODELETEIPK. PATCH - this patch when applied to your device will be downloaded
  the IPK is not deleted if they are properly installed.  Note: when this
  patch is applied all downloaded ipk is kept, you should not use Internalz Pro
  delete installed and no more need ipk.  A small price to pay to get your App
  Catalogue working again.
  A link to download NODELETEIPK. PATCH is found in this thread:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  
  Java 1.6 - minimum for WOSQI to work.
  In your search engine, search for 'Java 1.6' or 'Java 1.6 jre"to download Java
  the Oracle company.
  
  Your PC or laptop - WOSQI works on Windows, Linux and Mac.  I personally found
  that it does not work on PowerPC Mac, it's that you can't get Java 1.6 for these computers.
  And on PC Windows 8.1, I don't think that pilots Novacomd works on this version.
  
  -----------------------
  
  Now, the real work begins.
  
  1. install Java on your workstation.
  
  2. If your Veer is messed up, restore it back to factory using WebOSDoctor condition.  Good
  on screen instructions.
  
  3. launch your device and complete the activation and the Palm profile process.
  The AppCatalog update will fail, but it's OK, we'll fix it later.
  Once your device is running, put in Developer Mode.  To make this entry
  the Konami code on the home screen.
  Type the code as shown: "upupdowndownleftrightleftrightbastart". It's a bit geeky,
  but it works.
  Alternatively, you can type in, "webos20090606".
  You'll be put in the screen in developer mode, slide the switch to on to activate
  Developer mode.
  You can disable it later once you have applied the update to the App catalog,
  using the same codes.
  
  4. start WebOSQuickInstall (webosquickinstall.jar).
  
  5. attach your device to your workstation.  Once the workstation is aware of your
  device WOSQI will also recognize your device. You should see the name of
  your device in a drop-down list in the WOSQI.  Your device will also ask you
  If you want to connect with a USB device or charge your device.
  Select, load your device.
  
  6. There will be an icon on the right side of the WOSQI window that looks to the world
  attached to a hose.  Click on this icon and it will open a new window with
  several tabs.  Click the Applications tab if it is not already active.
  Search for Preware and Internalz Pro.  Install these two ipks.
  When these ipks are being installed, it might want to install other required
  packages.  Allow installation of other packages.  Once completed,
  Close the window and you will be current with the main window.
  
  7. now, look for an icon to sign more.  Click on it and it will open a finder window.
  Locate the NODELETEIPK. PATCH file that you downloaded previously.
  Let WOSQI install and apply the patch.  After that WOSQI applied the patch,
  the sheer can restarted.  YMMV.
  Then, for the update, set the date of your system on July 1, 2013
  via the application Date and hour.
  
  8. you are now finished with the steps in the workstation.  Remember to well to eject the
  device before you disconnect it from the computer.
  
  9. When you look at the menu of your device, you should see PreWare and Internalz Pro.
  
  10. then open the App Catalog.  Search for 'App Catalog Update.  Install the
  Update. It will probably fail, and it's OK.
  
  11. open Internalz Pro and navigate to the following folder location,.
  / Media/Internal/downloads.  You will probably see a called ipk,
  com Palm.app.appcatalogupdate_2.0.0.IPK.  Open the ipk.
  When you open this ipk, it automatically calls Preware
  to install the ipk.  When this is done, the App Catalog should be
  fully functional.  A restart of the swing may be required.
  
  12. reset the date system is automatic.  You should now be able to download
  the App Catalog programs.
  
  13. Notes, with the patch in place, you need to occasionally clean the download
  folder for managing storage.
  
  14. you're now back to a functional State of WebOS!
  
  15. you can uninstall the NODELETEIPK. Your device to help PATCH
  WOSQI, using tool/Device Management.  I had not done that, so if you are
  success, let us know!

• Cannot change the tab page to something else than the mozilla home page

  Used to have the newtab defined for my tabs page. After you have installed a program took bing-over. I removed bing, but not the tabs are only the start page of mozilla. When I change at all: config, no matter what I put the same page keeps coming back.

  Any ideas?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• Question: when a key hold do something, when the exit key do something else

  Hello, I would like my code to do the following:

  When you press a specific key on and press and hold {}

  do something;

  ...................

  }

  When the released specific key {}

  do something;

  ...........................

  }

  Any ideas? Thank you!

  When you return true, it means that you have consumed the event key if you returned false, it means that you consume the key event. Usually when you do something and you don't want the parent class to do anything else that you would return true. If you add a feature and always want the parent class to run you would return false. I do not see a difference because the parent class is not implemented for this function or is a parent class.

• If the current image == 'closedDoor' go on the position "opening, to" something else, go to "closeDoor".

  Edge Animate: I want to have a if else condition and can't.

  If you click on door_btn ...

  If (currentframe == "closedDoor") {}

  gotoAndPlay ("openDoor");

  }

  (other)

  gotoAndPlay ("closeDoor");

  );

  Can someone please help me to write the proper syntax? Thank you!!!

  Use:

  currentframe var = sym.getPosition ();

  var closedPosition = sym.getLabelPosition ("closedDoor");

  If (currentframe == closedPosition) {}

  SYM. Play ("openDoor");

  }

  else {}

  SYM. Play ("closeDoor");

  }

  HTH,

  Vivkeuma

• Replace the value of the parameter selected with something else

  Hello
  
  I have a feeling that this scenario is not possible, but I hope that someone on the forum can clarify the issue:
  
  I was asked to create a parameter that displays a list of values for the company names. However, by choosing a company name in the list, a business identifier would be used for the underlying request generated by Scout.
  
  Kind regards
  
  Kevin.
  
  p.s. I am aware that it is possible set the parameter identifier name and company but the preference is not to do this if it can be avoided.

  Hello

  When you create the item for the CompanyID class there are a number of options, you can check. You don't want the item class displayed then uncheck display article class. The sort element class is also not necessary.

  When you create the parameter to CompanyName you created the setting in the normal way, you don't have to tell Scout that there is an indexed LOV, everything happens in the background.

  Rod West

• Dashboard of the guests and stored procedures

  Hello
  
  I have 7 guests - 2 which are necessary and others are optional. I created guests from Dashboard and grouped 2 those required in a dashboard command prompt and more optional 5 in an another guest of dashboard. All the guests are assigned to the variables and used in calling a stored procedure in SQL Server. Because I have 2 groups there are 2 go buttons on the page. I found that the order in which I enter data and click on the questions of buttons and will disrupt the call to the proc (i.e. sometimes it brings back data but sometimes she will be not based on recorded fast values).
  
  I have 2 questions:
  1. is it possible to separate the optional and mandatory guests so I can put them in separate the dashboard sections, but to have only 1 'Go' button to send the data?
  
  2. among the guests, I would like to be a multiple selection. Is it possible to send the options of multiple selections in a stored procedure? I use the variables to other values, but I've read using a variable for multiple selection is not possible.
  
  Any help would be appreciated
  Thank you
  UNA

  Issues related to the:
  1. not in the standard, but with a bit of javascript, it is possible
  http://sranka.WordPress.com/2008/11/09/how-to-replace-multi-go-button-prompt-by-one/
  2. it is not possible in 10 g but possible normally as promised to 11 g. You must create camps prompt or a command prompt with the different possibilities to pass a string instead of an array or a list.

  Success
  Nico

• White Watch where video distortion effects shot image back from the edge, how it black?

  Hi all!

  I applied "Lens distortion" of the "Deformation" Video Effects to a clip, the tire corners image distortion, revealing white. I would like this to be white not, infact I wish it were 'Black' as when there is no image or video on certain parts of the screen in the sequence in question. The same thing happens when using other effects as "Point of view camera" folder "Transform" (uh, Ben?).

  My apologies in advance for what I have or have not done to win with impatience anyones

  Peter

  www.Pictures-of-Paradise.com

  Change the "fill color" in the effect black or something else...

• HP printer does not print the document I try to print, it prints something else.

  Original title: problem in printing a doc.

  Whenever I print a document from my HP printer it does not print the data of the actual document but it prints the file information
  For example,.
  I have printed a document named as G-Life, I wrote a letter to the company in but print the following things in the doc
  File name: G-Life
  Directory: C:\Users\kartik\documents
  Model: C:\kartik\AppData\Roaming\Microsoft\Templates\Normal.dotm
  Title:
  Object:
  Author: kitenge
  Keywords:
  Comments:
  Creation date: 28/05/2013 12:53
  Change number: 3
  Last saved on: 28/05/2013-16:45
  Last saved by: kitenge
  Total editing time: 25Minutes
  from the last full print
  Number of Pages: 1
  Number of words: 65 (approx.)
  Number of characters: 373 (approx.)
  These got printed on my printer, while the actual document is something else.
  If anyone can help me to get rid of it, I'll be very grateful.
  Thank you

  You don't mention the Word version

  In Word 2010, for this doc, file > Options > display

  Highlight print options

  Uncheck "print doc properties.

  If it occurs for all documents, with Word closed, locate and remove the normal.dotm template, it will be re-created the next time that you start Word

• Can I use the awesome < s:AnimateTransitionShader in something else that changes of State

  Is it possible to use the < s:AnimateTransitionShader in something else the state changes as theres pb cool stuff you can do like here: http://www.justsuppose.com/getting-fancy-with-Flex-4/

  < s:transitions >
  < s:Transition fromState = "" * "toState = 'log_in' >"
  < s:AnimateTransitionShader target = "{}" duration = "1000".
  shaderByteCode="@Embed (source =" nikos/pixelBlender/HexCells.pbj ', ")
  mimeType = ' application/octet-stream') "/ >"
  < / s:Transition >
  < s:Transition fromState = "" * "toState =" * ">"
  < s:AnimateTransitionShader target duration = "{logo}" = "3000".
  shaderByteCode="@Embed (source =" nikos/pixelBlender/Twist.pbj ', ")
  mimeType = ' application/octet-stream') "/ >"
  < / s:Transition >
  
  < / s:transitions >

  Hello

  If you just want to use pixelbender filters you create a task of shader and use any animation you want...

  http://gumbo.flashhub.NET/menu/ this example uses a filter for the melted cross effect

  http://gumbo.flashhub.NET/reflect/ that uses a pixelbender filter in a skin to create a reflection effect

  David.

• How to communicate between the host and the guest in a stand-alone PC

  I have a professional Standalone XP (host) that is not connected to a network. I created a host (XP Professional) using vmware. Pls know me how to communicate and transfer files between the guest and the host.

  Pls post the procedure or send it to [email protected]

  Thanks and greetings

  Ganesh.

  Use "NAT" or "Host-Only' networking for your virtual machine, NOT bridged.

  Activate a shared folder on your virtual computer configuration, map as a network of virtual machine of your shared folder on the host drive.

  Good bye

  Riccardo Riva

  VCP, RHCE, FCNSA

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '. Thank you!