Replace the value of the parameter selected with something else

Similar Questions

• Why the firefox profile is messed up and does not restore the tabs when you replace the Windows shell with something like bbLean

  I use Windows 8.1 x 64 but I can replace the Explorer bblean shell and when I do that firefox has issues with the profile such that cancel last closed tab or not to restore the tabs at startup.
  I was able to use the replacement of shell of bblean for years in previous versions of Windows, but he always had a weird behavior with firefox. Of course, I am currently in contact with bbLean developers working on the problem, but I would also like to hear what may be the cause of this.
  Thank you in advance.

  @guigs2
  Thanks for responding but I solved it somehow.
  'Replace the shell' means that I have deliberately change value in HKCU NT\CurrentVersion\Winlogon\Shell so it does not point explorer.exe but blackbox.exe.
  After the reset of my installation of windows and get rid of all programs, including firefox now I use firefox portable (not installation of vanilla from the original site) and found, I have no problem with profiles so far.

• Is it possible to replace the hard drive with an SSD? or would it be too expensive?

  Is it possible to replace the hard drive with an SSD?

  or would it be too expensive?

  Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

  Re: This win to install a SSD drive in a PowerBook G4?

  Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

  FYI - I have used the adapter is even cheaper now

  https://www.Amazon.com/GP/product/B009BA8V4M

• Re: Tecra A9 - 11M - replace the HARD drive with a larger

  I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

  Any suggestions on recommended records say 500 MB?

  Difficulties to install Windows 7 on this model?

  Hey,.

  > Any suggestions on recommended records say 500 MB?
  I assume you mean 500 GB and not 500MB, right? ;)

  Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

  You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

• Qosmio X 500 - 10W - can I replace the HARD drive with another?

  Hello

  I have a Qosmio X 500 - 10W with two drive HARD Toshiba MK5055GSX 500 GB 5400 RPM 8 MB? SATA II but is one of the hs so I'm wondering if I can be replaced by a more powerful style, drive HARD 750 GB 7200 RPM / min 16 MB Toshiba courses?

  Thank you

  Hey,.

  Your question is a bit hard to understand, but I think you want to replace the HARD drive with another (faster) model, right?

  Well, that s no problem. 7200 RPM hard drives works, they are a little stronger, but they're faster so if you need more performance without problem.
  750 GB or more are also no problem because the SATA interface is not the limited capacity. Theoretically 1 TB or more should also work.

  Anyway, you can buy the 750Go you mentioned that it will work. :)
  ?

• I have the network wireless with an extreme airport using my base station that dessert 4 Airport expresses. I want to replace the base station with a time capsule from apple.  Are there specific instructions other that connect the new time capsule

  I have a wired to the internet using my base station for 4 expresses the hard extreme airport.  I want to replace the base station with a time capsule.

  It is also easy to replace the existing base station and adding the name of the network and the password?

  You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:

  ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.

  -one-airport-extreme-or-time-capsule-to-http://www.iclarified.com/31189/How-to-Transfer-Your-configuration-settings-fromanother

• ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?

  Hey, Lenovo,.

  I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?

  Kind regards

  Mikael

  
  

• How can I replace the big picture with the poplet image and add an internal focus on the big picture?

  I need to replace the enlarged image with poplet image when you click on & also need a zoom internal on the big picture. It doesn't seem to be a simple way to do this. Js is available for this please?

  Just drag brett [at] prettydigital.com email Glenn.

  I think that your after...

  -Wide product displayed by default, click left and right you have a cursor of all images of poplet

  -Hover over the big picture without clicking, it's a zoom of the image or (which I think would be better) you click that or one of the poplet images and you have a model coming with a larger image.

• Automatically replace the jpg files with the same file name TIFF.

  Is there a a way to automatically link the files by replacing the jpg files with the same exact file name TIFF?

  Thank you!

  Click on the link in the links Panel and open the Panel menu. Choose repeat the link extension.

• I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  I downloaded red CS6 plugin and added to the contents of the package, replaced the existing files with the new without saving, now my thumbnails images RED and the color correction do not WORK! How to bring back my old file importerRed! ?? Help!

  Try asking in the forum Premiere Pro seems to be an Adobe first Pro Lab

• Replace the 100 pages with Lorem Ipsum?

  OK really puzzled

  I have 100 pages in Word of the text, and I need to replace the Lorem Ipsum text.

  Plan was to import text into InDesign, keep the styles, so forth and so

  But how would we go about replacing all the Lorem Ipsum text, while retaining the text, character for character, line for line, Word for Word, style?

  (this plan is to export the text to RTF to word and copy and paste the copy into Word)

  An operation what strange

  You can not easily replace the text character by character. Word by Word, however, was quite fun exercise.

  This script retains the original formatting, but replace the frame selected by your standard Lorem text (threaded) content. As a side effect, all signs of punctuation is also retained - which is caused by the replacement of words objects. Perhaps you meant, maybe it isn't.

  (Save it as "ScrambleTextToLorum.jsx" in your scripts folder; select the first block of text to loremize, double-click the script is running.) Wait a little.)

  if (app.selection.length != 1 || app.selection[0].constructor.name != "TextFrame")
  {
   alert ("Ground. Pull up. Ground. Pull up."); exit(0);
  }
  // Save selection
  targetStory = app.selection[0].parentStory.texts[0];
  // Make a Lorem frame
  loremFrame = app.activeDocument.textFrames.add();
  loremFrame.geometricBounds = [ "0mm","0mm", "200mm", "200mm" ];
  loremFrame.insertionPoints[0].appliedFont = "Times New Roman";
  loremFrame.insertionPoints[0].pointSize = 8;
  loremFrame.contents = TextFrameContents.PLACEHOLDER_TEXT;
  sourceStory = loremFrame.texts[0];
  // Grab its words
  sourceWords = sourceStory.words.everyItem().contents;
  // .. and kill the placeholder
  loremFrame.remove(0);
  // Replace one word at a time. Start at the end.
  sourceWord = 0;
  destWord = 0;
  while (destWord < targetStory.words.length)
  {
   targetStory.words[destWord].contents = sourceWords[sourceWord];
   destWord++;
   sourceWord++;
   if (sourceWord >= sourceWords.length)
    sourceWord = 0;
  }
  alert ("Safe landing. Have a nice day.");
  

• Replace the Oracle Logo with the logo of the customer

  Oracle Forms Wizard has created a form with "Oracle" logo in the upper right.
  How to replace the 'Oracle' logo with another logo?

  create your own menu in forms, save it under lety tell MYMENU.mmb, build, and then to assign MYMENU in the property of your form module menu (the mmx-file of the menu must be in your path of forms)

• My iPhone6s pairs with ONE single device (phone link2cell). will pair with something else, and "bicycle wheel" changes all the time! Any suggestions?

  My iPhone6s pairs with ONE single device (phone link2cell). will pair with something else. At the opening of the Bluetooth window "bicycle wheel" next to "Other devices" is always running as if the search! Any suggestions?

  When you open the Bluetooth section in the settings, you can still see the spinning wheel, because it is in discovery mode and is actually looking for other devices in the range. Other devices must be in discovery/torque for the device mode to find them. However, I'm not sure you can be associated with multiple devices at the same time with the iPhone. You can have multiple devices matched on the phone, but you can always not more than one partner at the same time. It depends on what it is you are trying to pair.

• I have a laptop 214dx CQ60. I want to upgrade the processor in it something else.

  I have a laptop 214dx CQ60. I want to upgrade the processor in it something else. I read on the Internet it is possible to replace the processor too long you will find the right socket, power, processor etc. Is there a list out there which is compatible with the laptop I have? I was hoping to find a processor that will consider a dual-core to a core2duo machine computer. Thanks for any info you can give me!

  Thank you for your help. I'm looking to an improvement in the operating system memory/too, so that the processor could do the trick. Was probably go Windows 7 64 bit at the same time. Thanks again.

• Unable to [out] the value of the parameter put_line with single quotes (apostrophe)

  Hello
  
  I want to store a common code in a sql file and where the different clauses as a parameter, so the structure is:
  
  Main.SQL Script:
  set m_sWhere = ' owner = "SCOTT" ';
  @MyReport.sql '& m_sWhere '.
  
  MyReport.sql
  OK: SELECT * FROM MyTable WHERE & 1
  ERR: dbms_output.put_line ('MyWhere: & 1');
  
  I am not able to print the where the clause. I already tried to set the where clause with other delimiters (e.g. #SCOTT #) and replace # by ' in the MyReport but failed as well.
  
  All advice welcome.
  
  Published by: netaktiv on 11.02.2012 08:35

  Hello

  netaktiv wrote:
  Hello

  I want to store a common code in a sql file and where the different clauses as a parameter, so the structure is:

  Main.SQL Script:
  set m_sWhere = ' owner = "SCOTT" ';
  @MyReport.sql '& m_sWhere '.

  Sorry; It is unclear what you are trying to do, and what you're doing.
  I think the only single-quoptes in m_swhere are those before and after SCOTT:

  DEFINE  m_sWhere = owner='SCOTT'
  

  That's what you need to be able to use this variable in an SQL statement. SQL * more will replace & 1 with its value. If you were typing the statement directly, just type a single before and after SCOTT quote, if you want only a single quote before and after SCOTT in m_swhere. You use 2 single quotes in a row inside string literals, but the string literal only you need here is the literal 5 characters 'SCOTT', containing sound ", a 'C', 'o', two ' t and single quotes to zero."

  MyReport.sql
  OK: SELECT * FROM MyTable WHERE & 1
  ERR: dbms_output.put_line ('MyWhere: &1');)

  I am not able to print the where the clause. I already tried to set the where clause with other delimiters (e.g. #SCOTT #) and replace # by ' in the MyReport but failed as well.

  You do not want channels OK: or ERR: in the script.
  Dmbs_output.put_line, like any procedure, only works in PL/SQL.
  If you want to display text in a SQL * more script, use the SQL * FASTER command, like this:

  PROMPT  MyWhere: &1
  

  If you really must use dbms_output.put_line, then you will need to use a string literal, and single quotes can be tricky.
  In Oracle 10 (and more) use Q-rating:

  BEGIN
      dbms_output.put_line ( Q'{MyWhere: &1}' );
  END;
  /
  

  {Quotes will not be a problem unless they occur immediately after a right '}'.