Sharing filters

Similar Questions

• Shared filters via Hyperion Services Migration

  HII, I have defined users on HSS 9.3.1 & I need to be updated to 9.3.3. I have a few defined filters on the user as well.
  When I move these users to 9.3.3 using CSSImportExportutility, I'm not able to migrate the filters defined on the applications...
  How will I be able to migrate these latest HSS filters.

  The filters are not actually stored in shared services, that they are still stored in essbase, so no matter if the security is outsourced and you can use the utility to migrate the filters, I agree, you can configure the users against the filters of shared services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to achieve is not equal with shared filters?

  I'm trying to set a filter shared in E10, containing Contacts who do not have a certain value in a certain area.  Essentially, we have a field yes / no value and we want to include the Contacts only when the field is not equal Yes (IE. That means that the Contacts that have a number or null/white value in this area would be included in the filter).

  Does anyone know how to get there?   I would use 'Does not contain' = 'Yes' or should I use something else like 'not exactly '?

  Any suggestions or advice on that would be appreciated.

  Hi Kurt,.

  In this example where the only values in the field would be 'Yes', 'No', or null - you can use 'Does not contain' or 'Not exactly' and get the desired result. Whatever it is, you'll be alone, including those whose value is 'no', or null.

  Where "Does not contain" becomes a little difficult is when you use a multiple selection field or if the data field is a mess of bad habits or bad CRM data. Of course, it may be useful for these exact reasons as well. My recommendation is if you use a filter on a single-selection list that has own data (i.e. only in white or the values in the selection list), then use 'not exactly '.

  But, anyway anyway you mention will work in this case!

  Hope that helps.

  Kim

• ELOQUA Insight report filters

  Hello

  I was wondering if there is a way to set the display filter criteria reports displayed as we do with the 'Shared filters' or segments.

  For example, to have the logic as something like filter 1 AND filter 2 AND 3 or 4 etc filter. I can see that we can have the RUP in displayed filters but I didn't always understand how to add supports for the displayed data.

  Thanks in advance!

  Hi Eva,

  If you have more than two filter conditions in relation to the various set operators among them, use the right shift key to report filter group together conditions. This is analogous to the addition of parentheses around two report filter conditions.

  Use the left SHIFT key to separate the report filter conditions. This is analogous to the removal of the brackets around two report filter conditions.

  Discover the Page 39 of the Eloqua Insight Reporter User Guide: the specified item was not found.

  Jaclyn

• Remove the shared filter

  Hello
  
  Can you please tell me how to remove a common filter responses of the Oracle.
  I know how to remove the stored reports in the Shared folder by accessing the presentation to manage, catalog but has not found a fromm place where to delete a shared filter.
  
  Thank you

  Jin
  We have a location in the catalog remove filtersI gives you the location of sale filters sample

  try to delete the contents of the folder and see whether you get shared filters

  samplesales\samplesales\root\shared\sample + sales\_filters

  Thank you
  Angelique

• File extension problem

  In the Folder Options/File Types, MS PictureIt Express is. DRW file ext. I can not open. MPEG or. JPG in Picture It.  XP

  How can I fix? Thank you.. .DW

  Hi d.w.wilson,

  Thanks for posting in the Microsoft Communities. The problem description, I understand that you are not able to open. MPEG or. File JPG in Picture It. provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         He has already worked?

  ·         You get the error message?

  This behavior can occur if the JPEG graphics filter is missing or damaged, or if the registry entries for the JPEG graphics filter is missing or damaged.

  To resolve this issue, remove Picture It! Express, rename the JPEG filter graph, delete the graphics filter registry entries JPEG and then reinstall Picture It! Express. Follow these steps:

  (a) click Start, point to settingsand then click Control Panel.

  (b) double click on Add/Remove Programs.

  (c) click on Picture It! Express check box to disable it, click Next, click Next again, click Finish, and then click OK.

  (d) click Start, point to find and then click files or folders.

  (e) in the named box, type "jpegim32.flt" (without the quotes), and then click Find now.

  (f) to rename all the files Jpegim32.flt Jpegim32.Old.

  (g) use the registry editor to remove the following registry keys JPEG value:

  -Tools/Graphic HKEY_LOCAL_MACHINE/Software/Microsoft/Shared filters / Export

  -Tools/Graphic HKEY_LOCAL_MACHINE/Software/Microsoft/Shared filters / Import

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Let us know if you need more assistance.

  Thank you.

• Means of marking contacts captured through the submission of a form?

  Hi guys,.

  I know that one of the ways of marking or tagging contact uses the field campaign hidden in forms ID so that we can identify contacts through a special form.

  Another option is that contains the contacts in a list shared in the stage of processing of the form?

  Want to know more ways we can do this? Hope to hear from you guys soon.

  I would like to point out that, according to your needs, it can actually useless to do anything whatsoever to tag contacts who have filled out a form. You can create segments and shared filters based on the condition that contacts have filled out a form or fill out a specific form. If you can always identify these contacts later by creating a segment.

  This is when you want information additional record you need to take additional measures to store data - for example, the campaign ID field you mention tells you not only the contact has completed the form, but also which campaign they were when they filled the (forms can be used in several campaigns). The query string method mentioned Mike McKinnon is used to capture additional information as a source of reference or campaign ID. You can also write specific values for the contact fields special during a processing step of forms using the processing stage of the forms 'Update Contacts - With Custom Values' - it's a good way to capture things like drive ID source and campaign if the form is used only for the source of a driver and the campaign. If you have a lot of additional information, you need to capture and send the form, you can use the steps of treatment of the "data object" custom update to store these data in a custom data object, assigned to the contact. This is excessive for most use cases, however.

• Divide the data in row in different columns

  Hi all
  I have a table with a column as below.
  col1
  ------------
  / shared
  / shared/dashboard invites you
  / shared/dashboard of the guests/statistics_from_to_p
  / Shared/Filters
  / Shared/Filters/_filters
  / shared/Summary Reports
  / shared/reports/age_gender_r summary
  / shared/TRC explore _portal/edge/DB tables / dashboard layout
  
  Here, I want to split these data delimited by "/" and the need to show as below. I tried with substr and instr functions, but I could not achieve.
  col1 Col2 col3 col4 col5 col
  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  / shared shared null null null null
  / shared/dashboard guest shared Dashboard prompt null null null
  / Shared/Dashboard Dashboard shared guests/statistics_from_to_p invites statistics_from_to_p null null
  / Shared/shared Filters filters null null null
  / Shared/Filters/_filters shared filters _filters null null
  / shared/Summary Reports shared null null null Summary Reports
  / Shared/Summary reports/shared age_gender_r null null age_gender_r summary reports
  Explore _portal/edge/DB tables layout / dashboard/Shared/TRC shared _portal TRC dashboard layout of dashboard Explorer tree
  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Appreciate your help.
  
  Thank you.
  

• Common shared lists & filters

  You can apply properties to the filters and shared lists so that they are only accessible to certain groups/users?

  It is possible for shared lists but not for filters. In the settings of the list (the train), click permissions and make any necessary adjustments.

  You also have the option to create a security group in the configuration of the primary user which excludes all the management of the contacts in this group. But then the members of the group cannot manage anything behind the Contacts tab.

• Apply filters to sharing lists?

  When you create a segment, is it possible to apply filters to a shared list? I can't do anything with a shared list except to include or exclude from the entire list.

  shared

  Create a new Segment

  Add a shared list

  Add filters

  * Right click and merge (you can also cut, or intersect)

  * You will need to register your segment before merging.

• Unable to see the filters in the Shared Services for Application Essbase

  Hi all
  
  I use Hyperion version 11.1.2. I created a filter in Essbase for a single Application. I gave you access to the server for the Essbase server in Shared Services. When I click on access control assign on Essbase server and after selecting the user, it does not display the filter I created in Essbase. Pls advice

  Hi, you must also assign the user access to the application of Essbase, e.g. of filters. When you assign an access control, right-click on the application, not the essbase server.
  If you have several database, then you select the database that you created the filter.

• Network and sharing Center (no answer)

  I have been using Vista Home Premium on a laptop Toshiba Satellite. I remember not exactly since when, but lately when I opened the icon ' currently logged in ': l to the taskbar and click on it and open CONNECTIONS current or CONNECT or DISCONNECT or NETWORK AND SHARING CENTER, it freezes: changement. t gave me a lot of problems... Please help... I tried Googling through and used commands like:

  1. net localgroup "Administrators'"NT Authority\Local Service"/ Add

  2. to turn off the automatic setting:
  Run as administrator command prompt.
  Type: "netsh interface tcp set global autotuninglevel = disabled" (without the quotes) and press ENTER.

  You may also need to run this command:
  netsh interface tcp set global rss = off

  To activate the auto adjustment:
  Type: "netsh interface tcp set global autotuninglevel = normal" (without the quotes) and press ENTER.

  To view the current TCP settings:
  Type: press and "netsh interface tcp show global" (without the quotes) to enter.

  I don't even know what they asked me to do, if it is correct or not, but I did and still no solution...: s: s: s

  Any yelp would be appreciated!

  Beppe!

  Nothing is perfect!... .but it should work!

  B3PPE,

  See that article following (http://support.microsoft.com/kb/929833) if it can help you to manually replace the files that SFC could not fix, it also gives you measurements on log file filtering so that only unsuccessful repairs of SFC are listed. Please note that the best source for replacement files would be a sound installation of vista with the functions you want to work.

  I will add to check your hard disk for errors, as corruption SFC could be linked to it. For details, see check your drive for errors .

  Our final recommended option for the problem that you encounter will be a Vista repair install:

  <><><><><><><><><><><><><><>

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or a level facility.

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  <><><><><><><><><><><><>

  It is always advisable to backup any and all important data before continuing with the major changes to your system. Please see: methods for backing up your files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><><><>

  Only a clean installation may shrink toward the low enough differences to isolate what causes this scenario. There are already has with your file system corruptions, we can't go until this is completely isolated. Please let us know if a reinstallation of your operating system is an option for you at this point.

  <><><><><><><><><><><><>

  Report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Support for the PatternRepository and filtering

  Hello. I am fairly new to the blackberry development.

  I am writing an application to extract data of the customers of our servers for our outside sales force. I retrieve a page dynamically formatted behind our firewall and display using basic procedures in the HTTP demo. My next step is to perform the filtering so that they could click on a phone number to call the customer or an e-mail address to send an email.  It works in bed in the messages application.

  I changed the _content of an ActiveRichTextField field and followed the ActiveTextFieldsDemo model to match a standard American phone number. However, when I run in the simulator of my phone number is not recognized, BUT it is picking up the address and offering to 'Add to Contacts', "View on Map" or "Navigate To Here."

  It seems the phone and e-mail patterns are probably already registered (since they work in Messages). In all cases, they lie.  Is it because the system will only match the first boss found in a field? (All data is in the area of the lone _content.)

  Any ideas would be greatly appreciated.

  I got it.  The ActiveTextFieldsDemo did some tests of the args to save the regex at the start of the device. I was never there happen. I did away with that and it works fine now.

  Public Shared Sub main (String [] args)
  {
  _menuItems [0] = phoneItem;
    
  ApplicationDescriptor appDesc = new ApplicationDescriptor (ApplicationDescriptor.currentApplicationDescriptor (), "Active text fields", new String() {"recognized cause"});
  PatternRepository.addPattern (appDesc,'\\(?\\d{3}\\)? [ -. ]? \\d{3}[-. ]? \\D{4} "(, PatternRepository.PATTERN_TYPE_REGULAR_EXPRESSION, _menuItems);"
    
  PAP MyAppMain = new MyAppMain();
  theApp.enterEventDispatcher ();
  }

• Windows 7; Windows firewall prevents the discovery network, files and printers, sharing, public folder sharing and streaming media

  Windows Home Premium SP1, completely up to date.  Windows Firewall is enabled.

  Try to keep the file sharing and printers on a home network.  Try changing the settings on the control panel; All Control Panel items: Center network and sharing; Advanced sharing settings.

  When I try to change the option buttons for sharing, then click on save changes at the bottom of the page, the screen jumps to the network and sharing Center.  Object entering the settings advanced, no parameters have been recorded.   The comoputer restarting does not help.  I checked that the following services are running and set to automatic according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4bff-4dd3-acec-ffc3524d44a4;

  The base filtering engine
  DNS client
  Function Discovery Provider Host
  Function Discovery Resource Publication
  HomeGroup listener
  HomeGroup provider
  Server
  SSDP Discovery
  UPnP device host
  Windows Firewall

  When I stop the Windows Firewall service, I can activate the sharing I want.  Of course the windows firewall prevents sharing I would do on my network.

  I'm uncomfortable with Miss having a firewall work on my computer.  How to configure my Win 7 machine windows firewall to allow communications with my homegroup?  I tried to restore the default values.  This did not allow the communication.  I tried to find the homegroup settings in the advanced settings of the windows firewall.  No luck there.

  What should I do to configure my windows firewall to allow network discovery and file sharing of printers and media streaming and sharing?

  Hi stephanie,.

  Thanks for joining us out on Microsoft Community Forums.

  Looks like the Windows firewall prevents the discovery network, files and printers, sharing, public sharing of files and streaming media. We will analyze and identify the cause of the problem.

  You have a third-party antivirus installed on the computer program?

  Method 1:

  To turn on network discovery
  
  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the left pane, click on change settings for sharing advanced.
  2. click on the chevron to expand the current network profile.
  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  The article below explains all about the network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  If any of these responses not solve the issue, let us then run the sfc scan and check if any file system is corrupt. I also recommend to perform a clean boot in order to find the root cause of the problem.

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  See also:

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/open-a-port-in-Windows-Firewall

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Hope this information helps. Get back to us if you have more queries about Windows.

• C410a - wireless not connect to the Verizon FIOS router - fails MAC filtering

  I just bought an all-in-one HP Photosmart Premium C410a printer.  It does not connect to the Verizon FIOS Actiontek MI424WR router, failed the test of MAC filtering.  Spent half an hour on the phone with Verizon (no resolution as they checked the filtering MAC is turned off in the router) and 3 hours with HP (no resolution).  Sharing the printer on a home network defeated the purpose wireless and is not acceptable because I don't want to have another PC switched on just to get to the printer.  Someone was able to resolve the failure "MAC filtering" wireless?

  Without the MAC address filtering test indicates the problem is inconsistent with other available error messages.

  There may not be a real problem of filtering.  I saw this message associated with WEP key mismatches secutiry and a host of other issues.

  To what extent do you have on the installation.  We can work from there.

  Host family

  P.S. I saw messages asking people to try to disconnect the router from the internet while doing the configuration of the printer.  Have you tried?  Sometimes the router check with the service provider before it will allow a device to join the network.  It bypasses this audit.