sharing folders HomeGroup falls after the addition of another folder to the Group

Similar Questions

• How to reset the shared folders, showing network after modified/deleted folder

  System: Windows Vista 64-bit

  Problem: after files moved or modified, they persist in network folder, for example:\\my-pc\

  It seems that their ghosts never die. Even when I put the file back to what was before, they are not accessible, and read error message, "you might not have permission to use this network resource...". »

  They are listed under ' computer management > shared folders > actions ", but I can't delete them or change them.

  Why there is no easy way I can change the shared folders?

  answer: * e-mail address is removed from the privacy *.

  The only way I found to clean these entries is to use Regedit to edit the registry.  First the standard warning from Microsoft:

  ----------------
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
  ----------------
  To resolve this issue, on the server, start Regedit (start-> Run-> 'regedit'), and then navigate to the following key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\Shares
  Can find stocks that no longer exist in the right window. One at a time click once above and press 'delete '.
  Close Regedit
  Restart the computer.
  HTH,
  JW

• shared members disappear automatically after the deployment of the ASO cube

  Hello

  What we were doing as below:

  
  the memerbers dimension are loaded by source for epma odi, and then, we deploy the aso and epma bso cubes.

  and the process type in the profile to load dimension members is defined as "merge as primary.

  
  

  the question as below:

  (1) initially, the hierarchy of the dimension as it:

  size AA:

  A

  A1

  A2

  A3

  This dimension is aso and aso cube deployed successfully.

  (2) the users change the hierarchy of the source table.

  changed to below: (just add a parent for A1 and A2 under A initial parent.

  A

  A'

  A1

  A2

  A3

  AFTE, this changes, and members are responsible for epma once again, the hierarhy of dimension in epma is as below:

  A

  A'

  A1

  A2

  A1 (Shared)

  A2 (Shared)

  A3

  and this process of loading and applications deploy processes run automatically overnight pocess.

  I thought that I delete the A1 A2 shared hierarchy and deploy the cube again after overnight charge and deploy processes.

  But what I saw in the structure of the aso cube after the party deployed the process is also that:

  There no common A2 A1 in the sketch, but just below members in the cube hierarchy in essbase.

  A

  A'

  A1

  A2

  A3

  It's really weird, why shared members disappear automatically after deploy and make different hierarchy between epma an essbase outline

  can you help me?

  I have no idea...

  EPMA is ASO-> size is set to "multiple hierarchies enabled" otherwise please turn on and then try to deploy.

  Thank you

  ~ KKT ~.

• Do not see the shared folders under one of the guests of WinXP

  I host with Windows XP 32-bit and VMPlayer 3.1.2.

  There are two comments the two Windows XP machines with the same version of VMWARE tools. All guests parameters are the same. But we shared the host and second file access does not work.

  Any ideas?

  TIA,

  Vitaly

  Have you already tried to uninstall/reinstall the VMware tools?

  Maybe the HFGS (VMware Shared Folders) service is not installed properly. What do you see in the registry under

  'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order '?

  André

• Shared Object skip intro after the first visit

  I hope that you guys can see something that I am missing. I want to skip the intro of the film flash after the first visit, so that the user does not see the intro to main site.

  I have the code on frame 1, an flv on frame 2 intro below and the main site on frame 3. Code seems perfect and straight forward, why it does not work for me. I have a stop(); on image 2 and 3, but I removed them to see if that would fix it, but no luck.

  _so = SharedObject.getLocal ("skipIntro");

  _introcheck = 0;

  If (_so.data.introcheck! = _introcheck) {}

  _so. Data.introcheck = 0;

  _so. Flush();

  Intro was not played

  gotoAndStop (2)

  } else {}

  Intro was played

  gotoAndStop (3)

  }

  Test your swf file by using the following twice.  Copy and paste the text in the output panel:

  _so = SharedObject.getLocal ("skipIntro");

  _introcheck = 1;

  If (_so.data.introcheck! = _introcheck) {}

  trace ("the game intro")

  _so. Data.introcheck = 1;

  _so. Flush();

  Intro was not played

  gotoAndStop (2)

  } else {}

  trace ("fried intro");

  Intro was played

  gotoAndStop (3)

  }

• How to activate the shared folders in the VMware tools

  I'm running a Windows 2003 Server EE guest x 64 OS in a virtual machine hosted by ESXi 3.5 u4 build 199239. VMware tools have been updated to the latest version for this build ESX.  In the VMware Tools Properties GUI the shared folders tab says "shared folders are currently disabled on the host computer.  Please see VMware documentation to find out how to activate it. "I searched all the VMware Documentation and have not found the answer to this question.

  Also, when folders are enabled it is my understanding that an addition is made to the guest OS network providers.  What is the impact of the network provider of shared folders moving further towards the bottom of the list of purchase orders (network connections, advanced, advanced settings, purchase order).

  As far as I KNOW, this is not possible if it running ESX (i)

  KB http://kb.vmware.com/kb/1317 tire

  The shared folders functionality is not supported by the ESX Server or GSX server, but is enabled when you install VMware Tools with the complete option. The feature is not enabled when you install VMware Tools with the typical option in respect of these products.

• to access shared folders on the cmd line?

  Hi, I'm trying to copy files to the shared folders on the command line. some research I found a few references to use the net use command to associate files with a virtual drive:

  NET use z:
  . host\y (where there is the shared folder)

  or

  NET use z:
  . host\shared folders\y

  However, the syntax is wrong, or this is the wrong approach entirely. pointers would be much appreciated

  Thank you!

  Either you use:

  "NET use."
  VMware-host\Shared files.

  This will be the map a network drive that contains folders in it...

  ... or you use the deep link:

  "NET use."
  VMware-host\Shared Folders\vmware»

  to directly map a shared folder as a network drive.

  BTW: The best way to know what you need on the command line is to map the "Shared Folders" in law by clicking on it in Windows Explorer and then run "net use" to see how it has been mapped.

  André

• Shared folders - upgrade Windows 10 of 15.11.

  Hello

  yesterday has been saved by Microsoft Windows Update 10.

  as I can no longer change le shard records as network drive.
  it is the host vmware "'' is no longer found () net use z:" ","\ vmware host\Shared Folders'). ""
  
  Anyone has a solution for this?
  
  my computer:
  Apple Mac mini with el captiain, VMware Fusion 08:02 with windos 10 pro 64-bit

  
  

  Eckhard

  Hello

  I'm the developer for the VMware Shared Folders feature.

  The problem is caused by the Microsoft updates, destroying the registry settings.

  After the upgrade, you just need to check and restore the registry setting below and everything should start working (for folders).

  (No need to uninstall and install again, as this will also restore the registry, but takes significantly more time.)

  All you have to do is to change the registry

  HKEY_LOCAL_MACHINE\ SYSTEM\CurrentControlSet\Control\NetworkProvider\Order

  Name: ProviderOrder

  Type: REG_SZ

  Data: "RDPNP, LanmanWorkstation, webclient.

  Change it to:

  Data: "vmhgfs, RDPNP, LanmanWorkstation, webclient.

  Exit the registry application

  Then you'll then readers of shared folders and the UNC paths accessible once more. No need to reboot or log off. No need to uninstall and reinstall the tools.

  It has also been noted in wire Re: support Windows 10

  Hope this saves time to users.

  Also when I was at Microsoft earlier this year test Win 10 and shared folders, I and others (for redirectors) says the guys from the migration of this question and they promised it would be fixed.

  Steve

• Cannot access shared folders

  Using Fusion 5.0.2 and Windows 8 Professional, I repeatedly tried to download and install Windows programs (for example, Stamps.com) stopped with the message: "could not access network location \\vmware-host\sharedfolders\desktop.

  I have shared folders is enabled in the merger.

  How can I fix?

  Sounds like an installation problem that can not handle when mirrored folders are enabled then... temporarily disable mirrored folders and try to reinstall.

• Sharing folders hidden in VMware Fusion

  Hello

  A that someone managed to share a hidden folder (ie. a directory starting with a '. ') in VMware Fusion? For example, I want to share my directory ~/.ssh with my vm linux client.

  When I try to add a folder in the GUI, it appears a search dialog box but does not display hidden folders. I can't find any option to display these files. If this is not the case, is there a command line tool that I have will allow me to do?

  See you soon,.

  Dave

  Even if you expose files hidden in Finder that will allow you to see them in Virtual Machine > settings... > sharing or you will be able to see displayed by default in the operating system invited via '\\vmware-host\Shared' files , unless you change the settings to view the folders hidden with the hosts control however operating systems here is a workaround.

  Using your need to see the hidden file ~/.ssh here, that's what I did.

  The following has been done with the Virtual Machine to stop target of in the guest operating system, not suspended by VMware Fusion.

  In my case, I made a folder named temporarily: dotssh

  In my Virtual Machine under sharing settings I added a folder by selecting the dotssh file and then closed VMware Fusion and then deleted the folder ~/dotssh .

  Then I edited the configuration of the Virtual Machine's .vmx file.

  When I added the dotssh shared folder it added several lines of parameters to the configuration of the Virtual Machine's .vmx file, and two in particular that I edited then manually.

  sharedFolder0.hostPath = "~/dotssh"
  sharedFolder0.guestName = "dotssh"
  

  I then changed to:

  sharedFolder0.hostPath = "~/.ssh"
  sharedFolder0.guestName = ".ssh"
  

  Next I opened VMware Fusion and started Virtual Machine and once at the level of the Windows desktop, I double-clicked the shortcut "VMware shared folders" and he opened the Windows Explorer "\\vmware-host\Shared records" and of course this folder appears empty as I had no other normal folders shared nor was the guest operating system configured to display hidden however folders add "\.ssh" to the "\\vmware-host\Shared records" in the address bar has allowed me to see the content of the .ssh my Home on Mac folder.

  Then I made a new desktop shortcut pointing to "\\vmware-host\Shared.ssh" to use instead of the shortcut to "VMware Shared Folders" by default, but I could also see hidden folders of the guest operating system and then would the .ssh folder without having to type in the address bar or create a new shortcut It's your choice.

• Sharing folders works does not in 3.0

  I upgraded to 2.0.6 to 3.0 without any apparent problem (OS X 10.5.8, MacBook Pro Core 2 Duo 2.33 GHZ, 3 GB RAM, XP Pro SP3) image of Parallels.

  However, when I try to access my shared folders in my network places, I get the message ".
  . Host/shared files is not accessible. You might not have permission to use this network resource. The system cannot find the specified file. »

  As suggested in another thread, I tried to uninstall and then install VMWare Tools, with the accompaniment of restarting the virtual machine and OS X, but nothing helped. I also tried to add a new shared folder in the Virtual Machine & gt; Settings & gt; Sharing and have checked to make sure that I am connected to XP as an administrator (as in OS X).

  I'll be very grateful for any help-

  Thank you

  David

  If the Explorer window opens the shared folder and your Mac files are here, so folders are working properly.  Is this not your topic (shared folders does not)?

  If you want to fix your Favorites shared folders network icon, click the old .host icon and delete it, then click on the link 'Add network place' under the networking and follow the wizard to replace your place to network for shared folders.  Copy the address in the Windows Explorer window and paste it into the section "address network or the Internet.  This will complete replacing the old obsolete icon by the new.

• How to skip a line after the calculation of subtotals in SQLPlus listing reports?

  Hi guys,.
  I have a SQL * Plus list report and I would like to break after calculating subtotals after a group (on which I take a break on). Currently, I am to be able to make a jump after the Group of not after the subtotal line.
  
  
  Here's what the output is supposed to look like. I want that back after the Subtotal line distribution. Currently, sound not to do so.
  
  Any help would be appreciated.
  

                                           
   YEAR  DESCRIPTION  TYPE        AMOUNT     ID        PURPOSE              DATE        Allocated      Used   Not Allocated           
  ----- -----------  ----------- ---------- --------- -------------------- ----------  --------- ---------   -------------           
   2010 XXXXXXXXXXX  XXX         9,999.00   99999     XXXXXXXXXXXXXXXXXXXX 2010/01/01      13.50      3.50            0.00           
                                                                                                                                      
                                 ********** *********                                  --------- ---------   -------------           
                                 Sub-total:                                                13.50      3.50            0.00           
  
                     XXX         9,999.00   99999     XXXXXXXXXXXXXXXXXXXX 2010/01/01     108.50     80.50           28.00           
                                            99999     XXXXXXXXXXXXXXXXXXXX 2010/01/01      42.00     28.00           14.00           
                                            99999     XXXXXXXXXXXXXXXXXXXX 2010/01/01       1.00      1.00            0.00           
                                                                                                                                     
                                 ********** *********                                  --------- ---------   -------------           
                                 Sub-total:                                               151.50    109.50           42.00           
  
                     XXX         9,999.00   99999     XXXXXXXXXXXXXXXXXXXX 2010/01/01       4.00      4.00            0.00           
                                           99999      XXXXXXXXXXXXXXXXXXXX 2010/01/01       3.00      1.00            0.00           
                                           99999      XXXXXXXXXXXXXXXXXXXX 2010/01/01       6.00      6.00            0.00           
                                           99999      XXXXXXXXXXXXXXXXXXXX 2010/01/01       3.00      3.00            0.00           
                                                                                                                                     
                                 ********** *********                                  --------- ---------   -------------           
                                 Sub-total:                                                16.00     14.00            0.00           
  
  ***** **** ******* ************                                                      --------- ---------   -------------           
  Total                                                                                   181.00    127.00           42.00           
                                                                                                                                      
                                                                                                                                      

  Hello

  Add "SKIP 1" to the PAUSE command:

  BREAK   ON  amount      SKIP    1
  

• ID of the Group of hotfixes

  Hello
  
  I just want to confirm if the patch set ID 4547809 is good to install 9.2.0.8 group of patches on Linux 64-bit platform.

  I meant if you have invalid objects prior to the Group of hotfixes, and if they are valid, it's good for you.
  If you had invalid objects before the Group of hotfixes, and if they are not still valid after the Group of hotfixes so I do not, you can do a lot.
  If you had all the objects that were valid before the Group of hotfixes, and if they become invalid after the Group of hotfixes and then we must look at why he becomes disabled and try to make it valid.

  Concerning
  Anurag

• A question about the analytical function used with the GROUP BY clause in SHORT

  Hi all
  
  I created the following table named myenterprise
  

  CITY       STOREID    MONTH_NAME TOTAL_SALES            
  ---------- ---------- ---------- ---------------------- 
  paris      id1        January    1000                   
  paris      id1        March      7000                   
  paris      id1        April      2000                   
  paris      id2        November   2000                   
  paris      id3        January    5000                   
  london     id4        Janaury    3000                   
  london     id4        August     6000                   
  london     id5        September  500                    
  london     id5        November   1000

  If I want to find which is the total sales by city? I'll run the following query

  SELECT city, SUM(total_sales) AS TOTAL_SALES_PER_CITY
  FROM myenterprise
  GROUP BY city
  ORDER BY city, TOTAL_SALES_PER_CITY;

  that works very well and produces the expected result, i.e.

  CITY       TOTAL_SALES_PER_CITY   
  ---------- ---------------------- 
  london     10500                  
  paris      17000            

  Now in one of my books SQL (Mastering Oracle SQL) I found another method by using the SUM, but this time as an analytic function. Here's what the method of the book suggests as an alternative to the problem:

  SELECT city, 
         SUM(SUM(total_sales)) OVER (PARTITION BY city) AS TOTAL_SALES_PER_CITY
  FROM myenterprise
  GROUP BY city
  ORDER BY city, TOTAL_SALES_PER_CITY;

  I know that the analytic functions are executed after the GROUP BY clause has been transformed completely and Unlike regular aggregate functions, they return their result for each line belonging to the partitions specified in the partition clause (if there is a defined partition clause).
  
  Now my problem is that I do not understand what we have to use two functions SUM? If we only use one only, i.e.

  SELECT city, 
         SUM(total_sales) OVER (PARTITION BY city) AS TOTAL_SALES_PER_CITY
  FROM myenterprise
  GROUP BY city
  ORDER BY city, TOTAL_SALES_PER_CITY;

  This generates the following error:

  Error starting at line 2 in command:
  SELECT city, 
         SUM(total_sales) OVER (PARTITION BY city) AS TOTAL_SALES_PER_CITY
  FROM myenterprise
  GROUP BY city
  ORDER BY city, TOTAL_SALES_PER_CITY
  Error at Command Line:2 Column:11
  Error report:
  SQL Error: ORA-00979: not a GROUP BY expression
  00979. 00000 -  "not a GROUP BY expression"
  *Cause:    
  *Action:

  The error is generated for the line 2 column 11 which is, for the expression SUM (total_sales), well it's true that total_sales does not appear in the GROUP BY clause, but this should not be a problem, it has been used in an analytical function, so it is evaluated after the GROUP BY clause.
  
  So here's my question:
  
  Why use SUM (SUM (total_sales)) instead of SUM (total_sales)?
  
  
  Thanks in advance!
  :)
  
  
  
  
  
  In case you are interested, that's my definition of the table:

  DROP TABLE myenterprise;
  CREATE TABLE myenterprise(
  city VARCHAR2(10), 
  storeid VARCHAR2(10),
  month_name VARCHAR2(10),
  total_sales NUMBER);
  
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id1', 'January', 1000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id1', 'March', 7000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id1', 'April', 2000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id2', 'November', 2000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('paris', 'id3', 'January', 5000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('london', 'id4', 'Janaury', 3000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('london', 'id4', 'August', 6000);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('london', 'id5', 'September', 500);
  INSERT INTO myenterprise(city, storeid, month_name, total_sales)
    VALUES ('london', 'id5', 'November', 1000);

  Edited by: dariyoosh on April 9, 2009 04:51

  It is clear that thet Analytics is reduntant here...
  You can even use AVG or any analytic function...

  SQL> SELECT city,
    2         avg(SUM(total_sales)) OVER (PARTITION BY city) AS TOTAL_SALES_PER_CITY
    3  FROM myenterprise
    4  GROUP BY city
    5  ORDER BY city, TOTAL_SALES_PER_CITY;
  
  CITY       TOTAL_SALES_PER_CITY
  ---------- --------------------
  london                    10500
  paris                     17000
  

• The library view display is not the content of the folder after the opening by computer shared in the homegroup

  Months ago, I shared the "My pictures" folder with my homegroup.  At some point, my son has opened one of its computer records & used an image.  Today, I tried to get a picture of this same folder through the 'Pictures' library & it tells me that the folder is empty.  The thought of losing all my photos made my heart sink.  It turns out that... all original photos are visible when my son is in the folder from your computer via the network AND I drilled down on my C drive & found there as well... Thank God!  I use Carbonite to keep a backup, but if Windows is going to "Empty" a folder & then Carbonite back up this empty folder... I have no backup & will have lost my photos!  What is going on?

  Hi Giddens,
   
  What is the error message you get when you try to access the folder that contains the images?
   
  I suggest that you do the following.
   
  Step 1:
   
  For any question of shared folders in the homegroup, run the resolution of the problems of shared folders to automatically find and fix some common problems.
   
  Follow these steps to run the troubleshooter.
  
  a. Click Start, type troubleshooting and press ENTER.
  b. click the view all link in the left panel.
  c. click on Shared Folders to run the troubleshooter.
   
  In addition, take a look if you have file sharing set up properly.

   

  Check out the articles below

   

  File sharing essentials

  Share files with anyone

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]