Short Circuit on the inductor

Hello.. I have a simple request. How is Multisim includes a short circuit? I take a DC source connected to a coil. When I do short, it is to show me a msg like "the driver gets burned" or something like that. Instead, it shows a straignt line in an oscilloscope. I can't prove this thory in Multisim, "a short circuit is a connection of small accidental resistance between two nodes of an electrical circuit that are supposed to be at different voltages. This translates into excessive electric current (overcurrent) limited only by the equivalent resistance of Thevenin from the rest of the network and potentially causes circuit damage, overheating, fire or explosion. "I will be happy to receive the exact solution.

Hi, Mr. Gil,.

Multisim is ideal and it will tell you if there is a short circuit.

Tags: NI Software

Similar Questions

  • short circuit in power CC connect Pavilion dv5-1002nr

    I bought my son a Pavilion dv5-1002nr in August 2008. The battery started to not hold a charge. It seems that there is a short circuit in the DC power connect. The Geek Squad at Best Buy (where I bought the laptop) says that to fix it, the motherboard must be replaced - about $ 500. Really? It is the only solution? Can anyone confirm? I would be grateful for information. If it is true, I won't buy another HP if they will only last less than 2 years. Help!

    OK, the only way to get this d/c Jack is to buy all cases of lower integer.  This is the info for the hp part store. I hope this helps.

    486790-001 in stock 
    Base chassis includes mounting housing - cable and power supply DC connector
     
    80,75 0.00 80,75
  • USB disabled after the update of the Sierra (a short circuit and a work)

    Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

    If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

    Hi Supermene,

    Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.

    macOS Sierra: If a USB device does not work

    Reset the management system (SCM) controller on your Mac.

    See you soon.

  • Lenovo T61 cannot turn on after short circuit

    Dear Sir/Madam

    I saw a low battery warning displayed on my lenovo t61, quickly, I plugged an ac cable while the power was on. As a result short circuit, no longer works.

    I tried the trick after pressing 10 times on the power switch. He worked, prompted me to bios settings. Once restarted in windows screen, the battery icon showed very low before he past.

    I can't charge my battery even, I used a newly purchased AC adapter. Using an ac adapter without battery inserted also fail to power on. Please help me.

    Hi bert958,

    Sounds like a motherboard, probably a dead fuse problem.

    But because the fuses are soldered, you will need a new motherboard unless you can fix it yourself.

    Vince.

  • Sansa Clip + short circuit

    My sansa clip + stops or crashes whenever the slightest Pressure is applied to the front. I'm relatively sure that there is a short circuit somewhere in the unit. This makes using it almost impossible and incredibly infuriating that it accepts several tries to get to what I want to hear without freezing. Whenever it freezes and if off, it resets to where it was when I turned it on, which is also irritating. I tried to restart it and I'm relatively sure that it is not a software problem. I had the player for about two years, although I him have not used exclusively as I had a phone that played music (I lost this phone last week). This problem has been present for several months and I'm not very eager to buy a new player, as the clip has been very useful and well done before this problem.

    Looks like it's a Goner. Fortunately, they are relatively expensive. It's not as if you replace a Cowon for $250 - $ 300.

  • G60-120us: triggered and crashed (short-circuit)?

    I really made a simple mistake, the screen was not reciving power so I unplugged my power cord and I forgot to take my battery or powerdown before starting to work on my laptop. The card mother screen plugin (main cord) was not entirely bluged in one side, I noticed, it was a folded internal thread (female end of motherboard) and I got a safety to straiten pin it and separate the son of ajesent, AND IT STARTED when I hit the 2 wires at the same time. The comp crashed when the spark occurred. I proceed to taking the battery and ended up straightening wire and re assembled. Now when I turn on it tries to start (lights happened) BUT stops 1.5 seconds later. I have FRY (fuse or the motherboard chip?) when he unleashed / short circuit?

    Hi, I do not understand what exact componet was damaged, but when I replaced my motherboard, it has not fixed the problem. Whitch is much cheeper than to replace the whole PC.

  • HP Pavilion G6 2005ax: laptop card mother short circuit?

    Hey everybody. My laptop does not charge and I am also unable to turn the laptop on the power chord. Power adapter works fine (tested on another laptop). The laptop works fine on battery. I took it to a service center (not an authorized) and the guy told me the motherboard has a short circuit and needs to be replaced.

    I want to know if it is correct because the laptop works fine when using the battery. Unfortunately, the battery is dead so I can't use the laptop more. Would it be a problem with the DC Jack or a motherboard problem?

    Thank you.

    Yes, it is likely to be the CC which is a separate replaceable part much cheaper than a motherboard. I would certainly try a new plug before as I have assumed that it is the motherboard. Our links are low right now, but check in a day or two for the part number and advice where to buy it.

  • When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "

    original title: xvidcore.dll not found.

    Nice day

    When I click on a video file in Windows Explorer, I get the message "not found xvidcore.dll', shortly followed by the message" Windows explorer has encountered a problem and needs to close. "  The screen becomes blue white.  I am operating Windows XP SP3.  Any advice much appreciated

    Thank you, Brian Newman

    No guarantee, but it might be interesting to try to download
    and install the XviD Codec:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    XviD Codec
    http://www.xvidmovies.com/codec/
    (name of the file to download: Xvid - 1.3.2 - 20110601.exe)

    Good luck...

  • short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

    short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

    There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964

    Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)

  • My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

    My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

    Found an answer online. Here it is:

    I also want to mention that if you disable your GPU acceleration and use the software only mode the question should stop. It seems to affect only when the GPU acceleration is turned on.

    Go to file > project settings > General and only software switch.

  • Can I save clips short, renowned for the active project folder in 14 elements?

    Hello!  I have a ton of renowned, short clips in a project I'm working on that.  Problem is, I have change the longer movie clips go ziping up to the far right (off the monitor), which causes a lot of blue air here because I get what I need.

    And a lot of my audio clips (narration) took off for the hinterland law-neighborhood, lost of the workspace until I go through the laborious search for them.  Seems to me that it wastes a LOT of time.

    Can anyone help?

    I'm not sure of your narration. I think that we need to solve the problems that as a separate issue.

    But here's how you create small clips of a longer clip:

    (1) define the components panel of project for the display of the list by selecting it in the Panel Options in the upper right corner of the Panel.

    2) double-click your videos in the active project (before placing on your timeline).

    (3) in the monitor of the Clip, the points value and exit to set your short clip.

    (4) drag this short clip from the Clip monitor into the active panel. It appears as if it were something new, shorter.

    You can do as many segments of this clip for as long as you want.

    There are also automatically that can work for you. Once more, make sure that you are in list view. It works as well in grid mode.

    Right-click on a clip in the active panel of the project, and then select Execute Auto Analyzer. This will create a new folder in your project assets with the longest clip automatically cut to shorter clips, based on changes in the content.

  • Short name of the CAW application and Modules of the CMO?

    Hello

    What is the short name of the application of CAW and CMO modules in Oracle EBS 11.5.10.2?

    Thank you

    Again, I think it's just part of the AR. There is no separate name module under the the 11.5.10 same patterns if it has its own responsibilities, workflows and D & B Punch out. It uses only two summary tables on AR balances and transactions for BI disclosure of credit information. If you haven't done so already, take a look at the 436341.1 Note on MOS.

  • Help in the creation of the schema Script in order to short-circuit

    Dear Sir
    As I have two similar patterns (with the same objects) and I need to create scripts for the two schemas for objects like (procedures, packages, functions, views, triggers) of these two diagrams (what I'm doing with the help of Toad (DBA > > generate the schema Script), now my problem is that the sequence of object in the scripts are different in the two scripts) , so is there a way I can get fixed a short sequence (probably in alphabetical order) .then my complementary process can be simplified



    Thanks and greetings
    Ashish Mishra

    If you don't want a specific product solutions, do not post in a specific forum of the product.

    I suggest that ask you in the forum SQL and PL/SQL.

  • Short films through the lines of output of NI USB-6509

    Hello

    I use the NI USB-6509 Board and on the manual of the device it says that external voltage sources must not be connected to any line output, it will be the damaged aircraft if they exist in short in all configured output lines (a line of output (1 or 0) is connected to another line (s) to exit. I want to isolate all lines output configured by connecting a diode in series and a 47 ohms limiting resistance far lines of output, that will help.

    Rgds

    Paul

    Paul,

    If the lines are shorted together briefly he probably will not damage the device because there are protection circuits.  However, it is not recommended to connect two lines.  Why do want to connect in this way?

    -Christina

  • iMac very slow and short HOT.  the fan runs almost constantly

    My iMac 2011 short middle slow and often gets "the ball" of the computer runs hot (uncomfortable keep the hand on top) and the fan is almost always running.  Activity monitor shows the low CPU usage. Any ideas?

    EntreCheck report is due to:

    EtreCheck release: 2.9.4 (254)

    Report generated 2016-02-18 12:04:46

    Download EtreCheck from http://etrecheck.com

    Time 03:31

    Performance: good

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Another problem

    Description:

    iMac computer is slow, get the beach ball often enough and the fan runs almost constantly because the computer heats

    Hardware Information:

    iMac (27 inch, mid 2011)

    [Data sheet] - [User Guide] - [Warranty & Service]

    iMac - model: iMac12, 2

    1 2.7 GHz Intel Core i5 CPU: 4 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1333 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1333 MHz

    0/DIMM1 BANK

    Vacuum

    BANK 1/DIMM1

    Vacuum

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Video information:

    AMD Radeon HD 6770M - VRAM: 512 MB

    iMac 2560 x 1440

    Software:

    OS X Yosemite 10.10.5 (14F1605) - since the start time: about 5 days

    Disc information:

    WDC WD1001FALS-403AA0 disk0: (1 TB) (rotation)

    EFI (disk0s1) : 210 MB

    Macintosh HD (disk0s2) /: 999,35 go-go (577,56 free)

    HD (disk0s3) [recovery] recovery: 650 MB

    HL-DT-STDVDRW GA32N)

    USB information:

    Apple Inc. FaceTime HD camera (built-in)

    HP Photosmart 8400 series

    Apple Inc. BRCM2046 hub.

    Apple Inc. Bluetooth USB host controller.

    Hub keyboard Apple, Inc.

    Apple Inc. Apple Keyboard

    Apple internal memory card reader

    Computer, Inc. Apple IR receiver.

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / System/Library/Extensions

    com [loading]. Cycling74.driver.Soundflower (1.5.1 - 2016-02-09) [Support]

    com.seagate.driver.PowSecDriverCore [no charge] (5.2.4 - 10.4 SDK - 2016-02-09) [Support]

    / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

    com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

    com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.4 - SDK 10.5 - 2014-01-27) [Support]

    com.seagate.driver.SeagateDriveIcons [no charge] (5.2.4 - 10.4 SDK - 2014-01-27) [Support]

    Startup items:

    HP USB EWS Gateway: Path: Library/StartupItems/HP USB EWS Gateway

    Startup items are obsolete in OS X Yosemite

    Launch system officers:

    com.apple.AirPlayUIAgent.plist [killed]

    com.apple.CallHistoryPluginHelper.plist [killed]

    com.apple.CallHistorySyncHelper.plist [killed]

    com.apple.EscrowSecurityAlert.plist [killed]

    com.Apple.cloudphotosd.plist [killed]

    com.Apple.cmfsyncagent.plist [killed]

    com.Apple.CoreServices.appleid.authentication.plist [killed]

    com.Apple.gamed.plist [killed]

    com.Apple.photolibraryd.plist [killed]

    com.Apple.printuitool.agent.plist [killed]

    com.Apple.RCD.plist [killed]

    com.Apple.SBD.plist [killed]

    com.Apple.telephonyutilities.callservicesd.plist [killed]

    [loading] 141 tasks Apple

    [operation] 58 tasks Apple

    13 killed process lack of RAM

    Launch system demons:

    com.Apple.awdd.plist [killed]

    com.Apple.ctkd.plist [killed]

    com.Apple.Emond.aslmanager.plist [killed]

    com.Apple.icloud.findmydeviced.plist [killed]

    com.Apple.ifdreader.plist [killed]

    com.Apple.nehelper.plist [killed]

    [killed] com.apple.periodic - daily.plist

    [killed] com.apple.periodic - weekly.plist

    com.Apple.wdhelper.plist [killed]

    [loading] 173 tasks Apple

    [operation] 80 tasks Apple

    9 killed process lack of RAM

    Launch officers:

    [loading] com.maintain.CocktailPurgeInactiveMemory.plist (2013-11-21) [Support]

    [failure] com.maintain.CocktailSystemEvents.plist (2012-07-08) [Support]

    [loading] com.maintain.LogOut.plist (2014-02-17) [Support]

    [loading] com.maintain.Restart.plist (2014-02-17) [Support]

    [loading] com.maintain.ShutDown.plist (2014-02-17) [Support]

    [loading] com.maintain.Sleep.plist (2014-02-17) [Support]

    [operation] com.maintain.SystemEvents.plist (2014-02-17) [Support]

    Launch demons:

    [loading] com.adobe.fpsaud.plist (2016-01-28) [Support]

    [loading] com.maintain.CocktailScheduler.plist (2016-02-18) [Support]

    [operation] com.memeo.WDMemeod.plist (2007-07-30) [Support]

    [loading] com.rogueamoeba.hermes.plist (2010-09-28) [Support]

    User launch officers:

    com.apple.MobileMeSyncClientAgent.plist [failure]

    com.apple.SafariBookmarksSyncer.plist [failure]

    [loading] com.google.keystone.agent.plist (2015-12-14) [Support]

    [operation] ws.agile.1PasswordAgent.plist (2013-12-07) [Support]

    Items in user login:

    iTunesHelper UNKNOWN (missing value)

    HP Photosmart Menu Application (/ Applications/Hewlett-Packard/Photosmart/HP Photosmart Menu.app) (2006-10-22)

    Airport demand of basic Station Agent (/ System/Library/CoreServices/AirPort Base Station Agent.app) (2014-10-07)

    Request for SmileboxTray (/ Applications/Smilebox.app/Contents/Resources/SmileboxTray.app) (2016-02-12)

    The messages application (/ Applications/Messages.app) (2015-08-19)

    WDMemeoAgent Application (/ Library/Application Support/Memeo/WD anywhere Backup/Agents/WDMemeoAgent.app) (2009-06-24)

    HP Scheduler application (/ Library/Application Support/Hewlett Packard/Software Update/HP Scheduler.app) (2010-09-17)

    Director Docker Application (/ Applications/Hewlett-Packard/HP Photo & imaging software/HP Photo and imaging Director/Director Docker.app) (2006-10-22)

    Other applications:

    [operation] 2BUA8C4S2C.com.agilebits.onepassword4 - helper (2016-02-09)

    com [running]. Growl.GrowlHelperApp.89492 (2006-12-30)

    com [running]. Memeo.WDAnywhereAgent.87504 (2009-06-24)

    [operation] com.apple.xpc.launchd.oneshot.0x1000000a.EtreCheck (2016-02-14)

    [operation] com.smilebox.Tray.61376 (2016-02-12)

    [operation] jp.co.canon.cijscannerregister.17640 (2011-05-04)

    Plug-ins Internet:

    Flip4Mac WMV Plugin: 2.3.0.14 (2009-09-28) [Support]

    FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    QuickTime Plugin: 7.7.3 (2016-02-09)

    Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    AdobePDFViewer: Unknown (2010-04-23)

    Default browser: 600 - SDK 10.10 (2015-07-16)

    Web of Google Earth plugin: 6.1 (2011-10-17) [Support]

    Silverlight: 5.1.40728.0 - SDK 10.6 (2015-11-04) [Support]

    DirectorShockwave: 12.1.7r157 - SDK 10.6 (2015-02-05) [Support]

    iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-18)

    User Plug-ins internet:

    RealPlayer Plugin: unknown

    Safari extensions:

    1Password (2016-01-25)

    3rd party preference panes:

    Flash Player (2016-01-28) [Support]

    Flip4Mac WMV (2009-09-28) [Support]

    Growl (2006-12-30) [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 999,35 GB disc used: 421,79 GB

    Destinations:

    Time Capsul of Alan W. Voges [network]

    Total size: 2.00 TB

    Total number of backups: 65

    An older backup: 08/29/15, 06:56

    Last backup: 18/02/16, 11:39

    Size of backup drive: adequate

    Backup TB 2.00 size > (disc 421,79 GB X 3)

    Top of page process CPU:

    4% WindowServer

    2% fontd

    2% safari

    1% kernel_task

    1% sysmond

    Top of page process of memory:

    633 MB kernel_task

    Com.apple.WebKit.WebContent (4) 299 MB

    172MO Mail

    Safari of 147 MB

    Overview of 78 MB

    Virtual memory information:

    504 MB of free RAM

    3.50 used GB RAM (1.12 GB being cached)

    174 MB used Swap

    Diagnostic information:

    February 16, 2016, 12:31:30 Library/Logs/DiagnosticReports/Mail_2016-02-16-123130_[redacted].cpu_resource. diag [details]

    /Applications/mail.app/Contents/MacOS/mail

    February 16, 2016, 08:15:06 /Library/Logs/DiagnosticReports/Inkjet6_2016-02-16-081506_[redacted].crash

    /Library/printers/HP/cups/Inkjet6.driver/Contents/MacOS/Inkjet6

    Ways to help make a slow Mac faster

    17 reasons why your Mac runs slower than expected

    Slow performance of Mac? This Article addresses!

    Difficulty of slow start in OS X | MacFixIt - CNET Reviews

    How to fix the slow down time and start. | MacTip.net

    6 easy tips to speed up OS X Yosemite on your Mac.

    Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

    Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

    Before Mavericks

    Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Mavericks and later versions

    Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    The ultimate solution

    Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

Maybe you are looking for

  • P10: ICC-profile-color?

    HelloI Don t know if I had a color profile for my p10 but now I do feel and need one. Can someone please tell me where and how to get a colorprofile for my laptop? I already looked in the drivers/download section, but there was nothing avaiable! Than

  • update my graphics card on a HP Pavillion 23 AIO

    product number: H3Z61AA #ABA model: 23-d034 OS: Windows 8 A6 AMD vision can I update the graphics card on this subject? can help you guys? thacks for answer

  • HPLaserjet 100 color MFP M175a: hp laserjet 100 color mfp m175a suddenly very slow

    I have a printer HP LaserJet 100 color MFP M175a, which has always worked well (except when in cooling mode). All of a sudden he started printing very slowly: for example, last night I sent a document of 20 pages to print at about 21:00 and was still

  • Need help with the installer of widows

    Hello, I need help please. I've been downlading an update for my Kodak 5000 series printer. In the middle of the installation, my power went out due to a storm. When I got back to complete the update, the update will not settle. The installer gave me

  • HP Officejet Pro 8600 and Windows 8.1

    Vietnamese to 8.1 Windows installation, my printer worked fine.  I installed Windows 8.1 and came across the message - the printer error - before you can perform printer - related tasks...  I deleted and reinstalled the printer and it worked.  I prin