should I be connected to the internet

Similar Questions

• If I buy a 12 month subscription, how often should I be connected to the internet?

  I've read conflicting reports.

  99 days?
  180 days?
  I have to check in every 30 days?

  If I'm off the grid when I'm prompted to renew my license I lose my apps?

  I searched the net for hours looking for a clear answer.

  Own Adobe's FAQ says:

  An Internet connection is required the first time you install and your applications to license, but you can use applications offline with a valid license. Desktop applications will try to validate your software licenses every 30 days.

  Annual members can use applications up to 99 days in offline mode. Months of members may use the software for 30 days in offline mode.

  that seems somewhat ambiguous. If I'm offline for 99 days and Adobe continually tries to contact me to validate my apps and can not my apps will still work?

  Thanks a lot for any clarity regarding that.

  with an annual subscription, you must be connected to turn on (to first install) and then at least once every 99 days.

  with a monthly subscription, you must be connected to turn on (to first install) and then at least once every 30 days.

  If you have an annual subscription, select and then disconnect from the internet, you can use your software for 99 days.  day 100 when you try to use your software, you will see a message saying that you must connect to the internet to continue using your subscription applications.  This prompt will give you the possibility to log in and connect to adobe.

  If you close this window without a signature, your cc app will not open.  If you sign in, you can then disconnect for another 99 days etc.

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• Fable III PC Retail - cannot activate the game. Windows-live should check the release date of your game make sure that your computer is connected to the internet.

  I just purchased Fable III PC Retail today and I installed and you get the following message:

  Games for Windows - LIVE should check the release date of your game. Please make sure that your computer is connected to the internet.

  No personal information will be sent to Microsoft. A LIVE ID is not necessary.

  As you can see I have an internet connection because I am writing this post. There is no button to push or anything to continue the activation process.

  The game was released in 2011 and 2012 is beyond the release date.

  What is the problem here?

  Using Windows 7 Ultimate Service Pack 1

  I7 2670qm processor

  16 GB of Ram

  NVIDIA Geforce GTX 560M / 3GB

  I found the answer myself. There is a bug in the commercial version of this game. In the pop up menu it is supposed to be a button that says "enter", but it does not appear then press just enter on the keyboard and all is well.

• Bought LR6 DVD but the installer does not connect to the internet for I can register it.  I downloaded the trial version to work around this problem, but I can't get the program to start.  I get the same message that I should connect to the internet and c

  Purchase DVD LR6 Adorama, but Setup does not connect to the internet so that I can record.  Internet works fine.   I have Adobe account.

  I went to Safari to Chrome and downloaded the trial version in the hope to bypass the DVD version, but I can't get the program to start.    I get the same message that I should connect to the internet and connect.  It seems impossible after 3 hours.  Spent an hour chatting with the support of the India.

  Also remove the cookie file and reg Lightroom then enter the serial number and check.

  Windows:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  programdata %

  It will open the ProgramData folder. inside locate Adobe folder.

  Go to Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

  Mac:

  (1) right-click on the icon in the Finder, then select the 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

• I have a Dell Inspiron N4110 and it says im connected to the internet, but I can't actually open things, what should I do?

  I have a Dell Inspiron N4110 and it tells me im connected to the inernet but I can't go online and for some programs, like steam for example, says that I have to connect to the internet. the only thing that I can open is Windows 64 bit, but I can't really do anything. When I try to do a syestem restore it tells me disk error C. Then I do a check disk. but that tells me error and do a system restore. Please help me boy Im only A 14 year HELP!

  -Thank you

  Cam

  Hello Cam,

  Welcome to the Microsoft community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  ·         What is the exact error message you get on the computer?

  ·         Were there any changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  Step 1:

  Check if you have the similar problem in safe mode with network, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem step 3 follow-up to reset the computer to start as usual.

  Method 2:

  I suggest you to optimize Windows 7 for better performance and check if it helps

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-in/Windows7/optimize-Windows-7-for-better-performance

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Presario a900: unable to connect to the Internet

  Greetings,

  Just do a system restore on my wife's cell phone. Internet worked before. Now, I can not connect to the internet. I can connect to my wireless network, it shows as connected, but on the network share, it shows as connected page. Not connect Internet using my browser or email program. Watch as 'unidentified network '. I had my computer tech look at his store. He was able to connect to its network. At home, connected to my wireless network and it shows as no link.

  Only has the "ipconfig release" and renewed ipconfig ". Nothing has worked. I can't see my other computers on the network, which is strange. Network discovery is turned on.

  I tried also simply plug a cable between the router and the computer. Still no Internet connection. Using a Lynksys EA6400 router.

  It's very confusing. Something that should just be a plug-and-play. Any help would be greatly appreciated before all my hair out.

  Thank you.

  Ted

  Ideal for ask. I wanted to post it. In fact, the link is on this site. Wish I had seen several days ago. Could have saved me probably 10 + hours of searching for the answer. In fact, it was Linksys at the second session of cat that told me what was the will. They wanted to change the security on the router to a lesser degree. But then it would have led to problems of connectivity with my other wireless devices. Some useful information.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/Atheros-WLAN-driver-fixes-connection-issues-with-many-new/TD-p/701407

  I am pleased to have this problem behind me. Hope that someone with the same issue find it useful.

  Ted

• Connection to the Internet by Satellite C650-110

  Hello

  I'm no computer expert, but I thought kind of that set up internet on my new laptop would not be a problem... I have the Satellite C650-110. My NET connection is a connection broadband Virgin hard wire Medis and currently, I connect to the internet vis USB as my old office does not have an ethernet port. I tried to plug the USB into the laptop and it does not work. I also tried the ethernet port screw.

  I tried to set up new connections in the Panel, I downloaded the driver from this site, I phoned Virgin who say that the bandwidth is fine but there is no network LAN on the PC. Is it possible to buy a new PC without a network lan installed?

  Anyone have any suggestions?

  Thank you

  Your laptop's LAN and WLAN cards inside, so it shouldn't be any problem on the Internet connection.

  To check first if it please the Device Manager and make sure that the LAN and WLAN cards are listed under network adapters. Can you confirm this?

  I put t really understand what you do but the connection to the local network is simple. Take the LAN cable and connect your computer laptop o the router. After a few seconds, you should be able to access the internet.

• HP Touchpad: touchpad is no longer connect to the internet

  My Touchpad is more connected to the internet. I can't connet through the world icon no more applications that require access to the internet (which is Shaking, weather apps) will work. In ADDITION, I can no longer pull my photos or music on the touchpad. Will not turn off the power of the touchpad. I was able to use the touchpad last week.

  I tried to reset the touchpad, but it does not work.

  I know we lost support in 2015, but all applications still worked - just not able to download new applications.

  Any ideas? I can't play Angry Birds for so long...

  Hello and welcome to the HP support community!

  What did you do to reset?  Normally, it's an easy task to hold down the power button and the button home for 10-15 seconds until you see the HP logo.  Release them.

  It forces a soft reboot - no file should be lost.

  WyreNut

• All in a single 228 MS cannot find my router/modem to connect to the internet

  I just replaced the hard drive on my desktop MS 228 All In One. I installed windows 7 Home Edition premium and everything seems ok. The computer displays any internet connection included, even though we have a laptop computer and two tablets
  Connected wireless to our router / modem box. I got this computer connected wireless, until the hard disk is dead. I do not understand why it cannot locate the internet now. I get the message to connect to the computer with a cable, but I need a Wi - Fi connection because the internet area is some 3 meters across the room!
  What should I do for a wireless connection? I must have done a few years ago, when I first installed this computer... but
  Do not remember how I did it... Help please...

  Thank you very much Dunibar, all this work after having followed your instructions... your a star.

  Very much appreciated. What ABOUT James... Maxiboy.

• iOS9.3 failed verification because you are no longer connected to the internet

  I try to install iOS9.3 but the phone says I am not connected to the internet.  My internet and wifi is on and running, what should I do?

  According to this user, Apple holds the real version of 9.3 and will come out soon a new:

  Cannot check iOS 9.3 during the upgrade process. When there is a good connection internet, says no internet.

• 9.3 IOS cannot be verified.  Says the Iphone 5 is not connected to the internet when it is.

  My Iphone 5 will check the IOS 9.3 update.  The message says that the phone is not connected to the internet when I know that it is.  What is the problem?

  There are widespread reports that older devices have problems with activation after the update. Your question is before the update.

  This seems to be a different problem, but I suspect it's really Apple prevents you from installing the update, you already downloaded, until they solve the problem of activation with the update.

  For those who connect via iTunes, you would see that you are already using the latest version, because this is now the latest version that you can download. Your phone has already downloaded, if Apple blocks you install.

  Wait for the update of the update. I bet that you should remove the 9.3-same already downloaded install file to your storage management settings.

• Equium M50: 2200BG WLan - unable to connect to the internet

  Equium M50 / wireless 2200BG Pro / Wireless eircomNETOPIA router 1642 4640 eircom

  Hello

  I have Aproblem with my wireless connection

  When I go to network connection I have 3 parts:

  1-broadband: inside there is a connection to broadband in disconnected state

  2 - LAN or high speed internet: inside there are 3 parts:
  in connected state (wireless 2200 BG) wireless network connection
  connection to the local network in connected state (marvell yukon)
  connection 1394 (1394 network adapter) connected status

  3 - Assistant

  So, normally the wireless connection works. But when I unplug the ethernet cable the part with the LAN connection is not connected and I can't connect to the internet, even though the wireless is connected.

  Can someone help me?
  Thank you in advance

  Generally, it should be possible to set up the broadband connection data in the configuration of the router.
  This must be done to connect to internet.

  So if you have disconnected the LAN cable please check if the WLan switch lights and check the FN F8 key combination.
  Then check if you can see the SSID in the Wlan network connections.

• Unable to connect to the internet via a modem router - Satellite A200

  Thanks to Xardas, I was able to successfully install Windows XP Pro, but not everything is working as it should. Of immediate concern is my inability to connect to the internet (DSL) through the installation of the existing modem router that I use. How can I check that the ethernet drivers work? … My Satellite A200 does not - connect the appropriate port light does not illuminate.

  Oh yeh. I noticed that whenever I start (boot) a "Wizard" pane appears informing me that new hardware was found and that the drivers have not been installed but it doesn't tell me what the new material is! At the same time, there is a separate pane that announces that the drivers have not been installed correctly.

  Of course, I can use the computer as it is, but before letting my wife loose on this subject, I would like to get rid of anything that can give her cause to panic.

  Where are you Xardas?

  Check please the Device Manager and all the entries listed under network adapters. LAN card is listed there?

  Have you installed driver LAN?
  What A200 you exactly (A200-xxx)?