Should I get the 13 "MacBook Pro

Similar Questions

• Should I get the base Macbook Air 11 inches, the 4 GB of ram?

  My use of the computer is basically writing, internet, surfing, streaming videos and music and the occasional simple recording with Audacity (and, eventually, once Garage Band that am I on Mac). I am looking to buy a Mac to last me through my last year of undergraduate and perhaps a few years of graduate studies.

  Here are my concerns:

  -4 GB of ram is not enough for the future of the development of software and upgrades of Apple.

  -Apple updates their current models in a few months and my timing for purchase is bad.

  -I'm on a budget, and even if I can afford the upgrade ram or 13 "MBA, same base MB Pro if I really want to stretch myself, I don't want to pay more, the difference will be extremely useful for me later.

  I like the size and feel of the MBA 11 ". But I also like that the 13 '' comes with 8 GB of ram standard, although I honestly don't even know if I need it. But I am attracted by the greater autonomy of the 13 "as well.  I'm not all that warned that with the hardware and software, so I want to just a few balanced opinion.

  Thank you

  Your question is a bit like asking what type of car you should buy.  Much of it is your personal preference.

  With a budget, however, one thing I can say is that your money would be better spent on additional RAM.  This should be the first place where you spend discretionary funds.

  For the rest, for example, 11 "and 13" models, visit an Apple Store and try them both for yourself.

• Need advice. Weather a small wacom tablet will be adequate for photography photoshop, or should I buy way. I want to use with the 13 "macbook pro

  Need advice. Weather a small wacom tablet will be adequate for photography using photoshop, or should I buy way. I want to use with the 13 "macbook pro

  If you carry your computer in a bag that is made for a 13 "laptop, the small tablet will fit as well. I have done this and found the small tablet to work properly. However, I found a screen 13 inches of being terribly cramped for using Photoshop.

• trying to install from the disc image on the new macbook pro, I get a' configuration error: 6

  Hello, I created a disk image that includes an installed version of Adobe CS5, trying to install from the disc image on the new macbook pro, I get a' configuration error: 6 ". Is it possible to correct the error and install cs5?

  Thank you

  Dominique

  Adobe applications must be installed using files of facilities.  Uninstall, use the cleaning tool, and then reinstall.  If you need a download link is provided below.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  Quickly find your serial number

• The latest Macbook Pro supports final Cut Pro 7?

  think of the upgrade, but cannot find anywhere that will tell me if you can run Final Cut Pro 7 on the latest Macbook Pro or iMac.  Thank you

  Http://roaringapps.com/apps?platform=osx , you can display the software compatibility with the version of Mac OS X. According to their announcements, Final Cut Pro 7 and Final Cut Pro X will run on El Capitan, which is the latest official version of Mac OS X. The latest MBP runs the latest version of the software.

  Your answer is Yes.

  HTH

  Leo

• Problems with the new Macbook pro 15' maxed out

  Here's a quick post about my experience so far with the new macbook pro. I just got a brand new fully maxed out in spec macbook pro 15 inch 1 to SSD 16 GB RAM AMD R9 370 m GPU (set to automatic switching is not always) and a 2.8 to 4 GHz i7. I turned on and set it up which was nice and took 2 minutes. Then experience decreased a little when I saw an EST 05:36 hours of battery life remaining to 94%. So I loaded 100% and it is still 60% of battery life announced and no program running that I literally just signed a brand new machine.

  Then I tried to use the migration wizard to import a backup of my iMac 5 k so I can do everything on this clone for my laptop. After having successfully connected (he told me if my password for time machine was incorrect or not) it froze and did nothing, continue did nothing.

  Then place had to call support, was a guy on the phone in 30 seconds and I unplug and restart the machine time, always that same question so I transferred to a guy with "more training". The new guy I could say knew a little more and knew that I knew how to set my password or if I walked in their properly for a bit but they all have been set for the same password just for this. I created a second admin account called "test" under his leadership, and when the migration assist froze on this account, he was surprised and proceeded to transfer me off.

  I preceded to restore fully the machine into thinking that my account setup is causing trouble with the migration assistant, and it turns out that the closure of that laptop it can only continue to 'download additional components', while that connected for 30 minutes so all last night was wasted, and now I guess he's got 5 left 12 hours to download original 'things '. Keep in mind that I can download 5 GB in one hour... After he wake up this morning and ending up where I left it last night :/ he says 84 hours go, now 72 and 51 and it is not updated even once in seconds, it took 20 minutes to 84 minutes to 51, it's literally a day 2 reset extravagance or what? Just to download it I can only imagine the actual plant until I can install my programs.

  The cost of the laptop was about $3600 but paid ~ $2900 after headphones were included and $250 off for delivery to students and other issues on the agenda of the process itself that is not my complaint, what happens, but sitting with a new camera and support useless just to ask me if I can use actually tomorrow at this price are unacceptable.

  I would like to continue using it for a while.

  You can try to reset the SMC http://support.apple.com/kb/ht3964

• should I get the 32 gig and increase storage icloud or get the 128 gig?

  Should I get the 32 gig and increase storage icloud or get the 128 gig?

  iCloud can't complete really the iPads of storage on board. You can't have apps to run from iCloud, you can't the films played to iCloud, etc...

  If you plan to use more than the 32GBs go for bigger sizes.

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• I have elements 9 Prime Minister, now have the new macbook pro with no disk drive, can I download the software?

  I have elements 9 Prime Minister. I now have the new macbook pro with no disk drive. can I download the software on the net, carry serial numbers?

  Hi Annie p.

  Please use the link below to download first elements 9

  http://prodesigntools.com/Photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  Please be sure to complete the section very important before you click on the download link.

  Thank you

• When Lightroom 4 will get an update for the new Macbook Pro with Retina display?

  I just ordered a new macbook pro with the retina display, and I know that photoshop is already compatible with it, 90% of my work is done in Lightroom. So I was wondering when or if there will be an update for the new screen high resolution?

  Thank you

  Eric

  The RC of 4.3 Lightroom offers HiDPI (retina) support in the develop module.

• iMessage unable connect the new Macbook Pro

  Hello

  I just bought a new Macbook Pro today.

  I already have a Macbook air with imessage and FaceTime.

  But when I want to connect to my iMessage on my Macbook Pro to nog I still get the same error: "an error occurred while verifying identity.

  Can someone help me?

  If it comes with OS X 10.11.4 it is a problem with iMessage and Face Time prevents a user connection. There should be a solution soon...

• Advice please: Photoshop (Camera Raw) run slow the new Macbook Pro

  Hi, last week my old Macbook 2012 Pro 13 "(8 GB of Ram, 2.9 GHz, 750 GB of storage) is dead so 2 days ago I replaced it with a new Macbook (2015) Pro 13" (8 GB of Ram, 128 GB of storage).

  I had heard that this computer would be the same if not faster to run Photoshop for me edit my photos (photography being my work part-time). The computer seems to work fine, until I opened about 100 photos Raw in Photoshop CS6 (Adobe Camera Raw), while when zooming with emphasis on my photos to check there was a significant (up to 4 seconds) lag between pressing the shortcut keys to perform a zoom and zoom that really happens. In addition, there was noticeable delay when changing the balance of whites by the sliders. I had none of these problems on my previous Macbook Pro, photoshop just seemed instantaneous. Then I was sure my CS6 has been fully updated, had the same problem, including the offsets when you use the sliders (white balance, exposure, etc.). Then I uninstalled and reinstalled my photoshop CS6, nothing has changed. I then downloaded a 7 day trial of CC in Photoshop to see if the last "photoshop" had the same problem, which was the case.  Finally, I took the computer to the store and they wiped and re installed my CS6 on it, nothing had changed.

  Sorry for the story back for a long time, but I was wondering if anyone else had similar problems, or if it seems you good? I'm just afraid that this new laptop should be the same, if not more quickly on photoshop, but he is underperforming compared to a Macbook which is 4 years older. I understand that it may not seem like a big deal, but when you work with as many photos as I do, such as small lag like this can add hours on my time of the edict.

  I'm pretty convinced that it is the new laptop is defective, but nothing has yet come with diagnosis, so it would be good to know if it is something that I should wait when photoshop is put on a new Macbook Pro like mine. Thanks a lot for your help

  Kind regards.

  You should check the amount of free space your player

  Apple > about this Mac > storage

  128 GB is the total size of the ssd drive

  A few general tips to get the most from photoshop performance

  https://helpx.Adobe.com/Photoshop/KB/optimize-Photoshop-CC-performance.html

• RAM Preview plays is not in real time on the new Macbook Pro

  Hello world

  I have problems getting after effects to play the video in real time in AE CS6. I use a brand-new Macbook 2015 Pro 13 "retina with a dual core 3.1 GHz processor Intel Core i7 and 16 GB of RAM. I just made sure my copy of AE CS6 is up-to-date with the latest updates (11.0.4.2), and yet I am unable to read the video or animation in real time using the RAM Preview to any size greater than 25% in the Viewer.  If I try to play a video clip of 29,976 fps, the framerate tops out at about 17-18 frames per second. When I press 0 for the RAM Preview, it starts caching the images such as normal, but even after a loop continuous cadence comes not near real-time. The audio plays fine, but the video starts immediately behind. I can't even a scene of simple great test of a form of retouching layer move on the playback screen in the real time RAM Preview.

  That said, I can get it to play in real time if I reduce the viewer up to 25%. But obviously, I won't be limited to work in quarter resolution on a new laptop. My last Macbook pro from 2008 and completely across the well treated RAM previews, being able to cache images and play them back in real time without problem.  I have to assume that there may be a function that I'm missing or something goes wrong, unless I just grossly overestimated the capabilities of my new laptop.  But surely, it should be able to manage simple video playback. I had no problem using first on this computer, then it can of course deal with the video.  Any help you can offer would be much appreciated, because this problem becomes really frustrating!

  Just for fun, try the trial of CC 2015 and see if it behaves correctly.

• Install the Mavericks Macbook Pro mid 2015

  Hello people.

  I work with music and my 10 tools Pro works perfectly well on Mavericks... I can't use it with Yosemite, the OS X my mac came with.

  I'm having a hard time trying to get the Mavericks installed on my Macbook Pro 15 retina. Mid 2015.

  It is even impossible to run the installer from USB.

  I used to run the Mavericks perfectly on my Macbook Pro 13 of retina mi 2014...

  I don't know if my mac is having problems to run the facility because of the same format DDD... or if a program mid 2015 totally mac cannot run Mavericks.

  advice?

  Thank you!

  Your firmware of the machine is too new to run the older version of Mac OS X.

• FCP7 will not migrate to the new Macbook Pro

  I am running FCP7 on a Macbook Pro OS 10.10.5 Yosemite. Recently my GPU Macbook died, if I swapped my hard drive in a new machine. All my programs and preferences and settings appear to have migrated EXCEPT fine, FCP. When I try to open it, I get a prompt for the serial No. I put in the serial and message 777 n. "'I don't have the original disks so cannot do a re-install, just write down the series.

  I just try to open the program in order to convert the project files in XML format and open them in first.

  Any tips?

  Wait... did you install the drive in another computer and try to boot from this drive? Or did you mount it and try to migrate applications off of it?

  FCP 7 do not migrate. He moved around the library and file system, those who are not returned when migrate you, so many critical parts of the PCF are not reduced.  The only solution is that you can not do... install the installer DVD.

  Sorry man.

  I've migrated to a new laptop, now FCP Studio 3 will not take my serial - unknown error 777