end of time delay with stop button

Similar Questions

• Faced with a problem when writing to a txt file with stop button start

  Hello

  I am trying to use this stop start program that I found while surfing around this great discussion. actually I want to

  to write data to a text file when I press start button and it should stop writing when you press the stop button and

  After that whenever I press the button start again he should invite me for the new file name. now, even if I change the

  name of the file in the path dialog box it gives me error when I try to stop the program by pressing the stop button.

  need help to solve this problem. VI is attached with this post.

  Thank you

  with impatience... Hussn

  Hello Hussain,

  Sorry about that!  A bad tie.

  You can go there.

  Kind regards

• How GOLD error on terminal with stop button

  Please someone tell me how to connect the wire error with / gate. Actually Im trying to stop GOLD button and error status to stop execution of a while loop. Don't know how to get the terminal as boolean error status because it is a cluster and I can't connect directly with door or.

  Use the unbundle or unbundle by function "name" in the palette of cluster.

• How d code a PDF form to merge/add a second PDF form at the end of the existing with a button or a link that a user can click?

  I have a few forms developed for different types of application. There is a form of basic that must be met and on 4 or 5 others that can be added to him according to what all needs to be asked. I would like to have a button or a link at the bottom of the base form that a user can click on to right after it.

  You must add the other PDF pages and use these pages as templates.

• Stop the loops with a button

  I have an infinite loop is and display of data. How can I end the loop with a button or a keypress?

  Periodically perform a ProcessSystemEvents() call inside the loop. In a reminder of the STOP button, set a flag to indicate your loop to stop.

  stop unsigned int = 0;

  While (! stop) {}

  data getmeasured

  display the data

  ProcessSytemEvents()

  Sleep (250);   to be polite: it is impolite to spinlock, since you will monopolize the CPU and other threads can get hungry

  }

  then, in the reminder for a STOP button

  STOP the button callback routine

  stop = 1;

• How to stop and restart a .vi with a button front?

  Hey guys, a newbie here.

  I have a .vi with a stacked sequence. First frames are few parameters (LIN master node) and initialization of hardware and hardware data should pass on (the frame response table). In the next section, there is a loop in which the data of sends and receives material (LIN monitor). If I want to change the initialization, settings, or data values, I need to stop the .vi and restart it. I was wondering if there is a simple way to do this with a single click (a button on the front panel).

  An alternative would be to put another loop outiside all stacked sequence, then run it once with a push of a button (the inner loop should leave the reboot on the outside), is it possible?

  I hope I made any sense. Thanks for your suggestions.

  Tomaz

  Ideally, redo the code with a state machine would be the best way to go, if this is so you can add this powerful tool to your Toolbox. That being said, wrapping your existing code in a while work loop, with its own stop button to stop the program, if the execution of the entire sequence is ok. Where you might encounter problems with this, is if there is a step in the sequence that should not be run again, there should be the encapsulation of code from the image of this sequence in a case statement that only runs the first time through. If you have the time, learn how to use a state machine would be a real advantage, really take your LabVIEW knowledge to the next step, if you pardon the pun.

• Lost the STOP button with upgrade for FF9

  I can not get the STOP button on the Navigation toolbar since I upgraded to FF9. Where at - it go?

  He was a combined button by default at the end of the bar of address for awhile now.

  Loading a page it's a stop button, because that's when you can stop it, and once it is loaded it becomes a button reload, because you can then reload the page.

  It can be customized by dragging the end of the address bar and to reverse the order buttons, you then get to see two separate buttons:

  • Customize controls, buttons, and Firefox toolbars
  • Frequently asked questions after updating to Firefox 3.6_what-happened-to-the-back-refresh-and-home-buttons

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• A VI with two stop buttons

  I have a single VI which shows the two stop on the front panel buttons. My scheme is quite simple with 2 while loops and the other for loop. Whence the second stop button? Why is the second button here? How can I remove the second stop button?

  Brijesh says:

  Hello

  When you put two while loop. Stop button automatically two will come.

  Not always true. It all depends on what part of the palette that you select while a loop from. I can't, however, don't forget the name of the part of the pallet where it automatically to the stop button. There are also better ways to stop the parallel loops as the queues or the authors of the notifications if you have more than 2. Or, the action engines (I always throw this to save Ben from having to post!)

• While loop with stop unwired FPGA button?

  I've seen examples FPGA with a while loop where nothing is plugged to the stop button. On a target PC, it would throw an error. What it means?

  I think you are talking about "Timed loops" that are "single-Cycle timed loops" on FPGA.

  FPGA is intended to be run until it is powered, a 'Stop' software does not much sense.

  Norbert

• Stop the timer and a link button to stop the timer

  the problem is the timer will work kick to the end every time I turn the knob and how could I stop time and the timer control. Also, how would I link the operational (Wash, Rinse, Spin, Soak) and the water level to set the timer?

  In your code, pause feature does not include the implementation of the timer.

  Try the timer attached, I did while practicing in the review of the CLD, it's PAUSE feature.

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• Z820 - button Power LED blinks 4 times (red) with beep... bad card (Quadro 4000) graphics?

  Hello

  My Z820 at the office is suddenly having a few hardware malfunction.

  When I turn on my machine, the PSU/system fans don't rev and the Power LED button flashes red with a beep 4 times.

  According to this page of troubleshooting, this indicates a faulty PSU on the new UEFI computers:

  HP desktop - computer does not start and emits a LED or a beep Code

  Section "code beep and LED descriptions.

  Get the exact model of LED as the example of "power failure".

  Then, I got a new power supply replacement. I still have the exact same model LED and beeps...

  So, I have drawn deeper and found that when I removed the Quadro 4000 card graphics and then put on my machine, the power button LED is lit in blue (led code ' computer-S0 (normal operation) "") and all the normal spin fans.

  The Quadro card seems to be the culprit...

  Unfortunately, I have no alternative graphic card laying to verify this around, I'm waiting for a replacement of the graphics card (via HP service) to arrive tomorrow.

  Is it possible that the power LED button code (4 times red with beep...) has nothing to do with a bad power supply and that my Quadro is bad?

  Dries

  Dry... that Z820 has been giving you headaches.

  Many fault codes have not changed since the previous workstatons.  I hit this series of beeps of error in the past, and often doesn't mean that the power supply itself is the cause.  It can be a hardware device to the bottom of the chain causing a power surge to power, triggering his "crowbar circuit: fault protection

  http://en.Wikipedia.org/wiki/crowbar _ (circuit)

  Here are the instructions to deal with this series of beeps of a previous HP xw technical and repair.  Note the number 2 in the troubleshooting instructions... usually you don't have to go down to 3, in my experience.  I think that you have already found the faulty unit:

  Loss of power.
  1. open the access panel and make sure that the power cable is properly
  connected to the system board.
  2. Locate the faulty device by removing all devices and then reinstalling one at a time
  until the workstation fails. Replace the device at the origin of the failure. Continue to add
  devices to make sure that everything works correctly.
  3. check the power supply feature.
  a. turn off the AC power.
  b. remove all cables internal power on the system board.
  c. connect the power supply.
  ● If the power supply fan turns and the BIST LED lights, then the
  power supply is good. Replace the motherboard.
  ● If the power supply fan does not turn or the BIST LED does not
  light up, replace the power supply.

• My stop button for Windows 7 has always a shield orange with one! indicating that an upgrade is required, but it is never done. Why?

  My stop button for Windows 7 has always a shield orange with one! indicating that an upgrade is required, but it is never done.  Why?

  Check for an update that fails in Windows Update-> View Update History - maybe tring to install and fail to each start cycle. If so, please post the details of the update (including KB only, & error codes). Error codes can be found in law clciking on the update failed and select details.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Is it possible to play or pause a video by clicking on the video itself than with a set of the command bar and stop buttons?

  Is it possible to play or pause a video by clicking on the video itself than with a set of the command bar and stop buttons? If Yes, how can we do?

  When you set the video object, just add a listener for events such as:

  myVideo.addEventListener (MouseEvent.CLICK, toggleVideoPlayback);

  private void toggleVideoPlayback(e:MouseEvent):void {}

  If play, pause

  If in pause, play

  }