Should I replace an AMD Radeon HD 7770 with Quadro FX Pro 3800 graphics card?

Hello world

I'm an entry level editor that makes internal company videos.  Here's the situation (I hope that's not too basic a question):

I just buy Adobe Master Collection for a newly purchased Dell XPS 8500, with an i7 processor, 24Gbs of Ram, a 1 TB drive and an entry-level Radeon graphics card.   I intend (ed) to replace the AMD with the FX 3800, but looking at the specifications, the AMD card seems to be powerful enough: two GB of GDDR5 memory and PCI Express 3.0 16 buses with a maximum resolution of 4096 x 3112 x.  The FX 3800 was bought a year ago, it has 1 GB memory GDDR3 and PCI Express 2.0 x 16 bus interface, but has certification for GPU acceleation Adobe. The FX3800 display two ports and a Dual Link DVI port with a resolution of 2560 x 1600.

I'm shooting AVCHD on a NEX - 5N.

Appreciate any ideas you may have.

You want a Nvidia card for MPE support material. AMD cards are not supported now on the side PC with Open CL. There is the possibility to get a Geforce card of 600 series rather that to use the Quadro which gives you the same or better specs as card AMD.

Eric

ADK

Tags: Premiere

Similar Questions

  • Need help with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics

    I recently bought the 15z-j000 ENVY and updated with the AMD Radeon HD M 8750 + HD 8000 Series Dual Graphics. I wanted the dedicated HD 8750 M for games and whatnot. When I opened first to the top of my new laptop, I did a clean install of Windows 8 from a USB key. This completely erased all of the HP preinstalld drivers, software, etc.

    I installed the beta drivers for my laptop from the site Web of AMD.  Here's my problem. How will I know that my dedicated video card working properly? I ran a few games and they seemed to do as well. But when I checked my system with CPUz and dxdialog it says that I was running the graphics card integrated. How does the dual graphics and how can I make sure I take advantage of my dedicated card. An explanation of the depth and how for the use of the AMD solution dual graphics card would be apprechiated.

    I'm no expert on the switchable graphics, but you find the answers to your questions in the Overview of the switchable graphics or Dual GPU or switchable on portable graphics equipped with double GPUS and AMD.  Be forewarned however, documents were written for the HP PC using the appropriate HP, drivers if you use the Beta from AMD drivers, then documents may not match what you see on your system.

    R

  • What graphics card to replace my AMD Radeon HD 7570?

    I had a series of system "blocks" over the past two weeks.  I get a warning that the display driver is followed almost immediately by the screen goes black and white and then a blue screen saying something on pilot display and system shutdown to protect themselves.  I've seen several posts on noisy fans on the AMD Radeon HD 7570...   Here is the config of the system:

    HP Pavilion HPE h8 x 1300 PC desktop

    Processor AMD FX-8150 eight (3.6 GHz, L2/8 MB of L3 Cache 8MP)

    1 TB SATA hard drive 7200 RPM

    1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]

    Power supply 300W

    DVD SuperMulti burner

    DVD SuperMulti burner

    Card Wireless Lan N Premium

    memory card reader 12 in 1, 4 USB 2.0, 2 USB 3.0 ports

    Audio beats

    Premium HP keyboard and optical mouse

    There seems to be several versions/sizes of the Radion HD AMD 7570.  How to know what exact card on the agenda.

    My system is about 3 months out of warranty.

    Is there a better more reliable card that I use for replacement?

    I saw a few comments in the Forum HP re the problem with fans on the AMD Radeon HD 7570 map.

    All advice appreciated!

    Hello

    HP has several listed for the h8-1300z HPE graphics cards.  The top graph card will require the top end of HP power.  Look at these specifications.

  • AMD Radeon HD 7770 giraffe FH PCIe 2 GB

    I need complete Specifications for this baby, as well as compatibility with the other cards so I can cross the fire both of them.

    Thank you.

    Hello

    HP does not publish specifications for video cards used in HP computers and the specifications may be different compared to retail businesses on the video card to the counter.  Look here on this site for more information on the video card.

    Download GPU-Z and see if this tool will help you.

    While HD 7770 2 GB video card is a great mid-range graphics card. Look at the comparison of performance on the above referenced site. I use a NVIDIA 460 in one of my PC, which is enough to run some games to high to ultra.  PassMark has also some video card benchmarks.

    In general video cards minus 9.5 "must fit in your PC but it is always good to measure before you buy. Consult this publication documentfor more information.

  • GPU AMD RADEON 7470HD 1 GB GDDR5 vs INTEL HD GRAPHICS 3000

    I just don't understand why the intel 3000 much more better than my discrete graphic card graphic AMD Radeon HD 7470, I use a dynamic mode here and I can simply compare the quality vs high performance thing. A good example is I open and play NBA 2 k 12 and it seems that the Intel HD graphics card gave a lot more 'PERFORMANCE' and 'QUALITY' of the game when I changed my GPU to save energy, even if I change the settings of the graphics card Intel for its 3D preference by fully optimizing the 'QUALITY' to 0% Performance It gives even more performance + QUALITY in my NBA 2 k 12 compared to my Radeon 7470HD I've also changed the 3D settings to much higher Performance of 80% and 20% of quality. I always found kind of GALs of the graph + giving poor quality makes me inconvinient to use.

    Another thing that was when I tried to change my GPU fixed dynamic mode, and this passage from the high-level sport gives less total aprrox. memory of the "dxdiag", he gives only 786 MB when it is in the type of energy-saving, it gives more its total 1 600 MB memory Aprrox.

    IS THIS A PROBLEM FOR MY GPU CARD? I'LL BE HAPPY TO ACCOMMODATE ALL OF YOUR OPNION OF THESE. Thank you!

    Why is your memory Intel more your AMD brief, who knows, I can tell you that in the information---> components---> display system, is my HD 6770 m ~ RAM 1.00 GB (1 073 741 824 bytes) and Intel adapter is ~ bytes of RAM adapter (1,335,959,552), maybe you should check there.

    You can believe me or not (you can take a horse to water, but you can force it to drink) why I believe you get better performance with processors intel compared to the Radeon, this is because the software beast of switching does not work, be said. You don't believe me search this forum you will find enough post where the owners of laptops with switchable graphics are looking for help with graphics there.

    Man, I do not see why you just don't try by yourself, if it doesn't work for some reason, or you still believe that the graphics card intel play better change it back, it's not permanent, there is no reason for you to procrastinate.

    You say that you want to use Intel to play a game and AMD to play another, what's the problem, what you need to do is right click on the desktop and switch from one to the other and vice versa if necessary or is it too difficult for you to understand. You can't play two games together, so I really don't know why you would even mention it.

    FYI the only time where I never use power saving mode is when I am on battery, I have my bet on high performance, really how much money will save you in a year of use of a laptop computer if you switch from high-performance, energy savings depend on what you use your laptop for a little money, not even enough to buy a Merry feast at Mcdonalds?

    Man, I'll tell you once and I'm outside here, being able to save those who the game is crazy, those who build platforms of games can spend hundreds of dollars to purchase blocks of power to get as much power as they can in their computers, because it takes a lot of good gaming power, and energy saving are you talking

  • G505s not start after AMD Radeon HD 7640 G + R5 M200 double put graphic updated

    Hi, I have a Lenovo G505s currently running on 10 to win. This weekend, the computer received an automatic update (Windows update) for the AMD Radeon HD 7640 G + R5 M200 Dual Graphics. After this update, the computer does not, with the result a blue screen. I start safe mode, install a driver, and on the next reboot, the system starts. But then, to start the automatic update of windows install the new driver again and the computer stops and cannot be started. A hint anyone?

    Thanks in advance.

    Good day and welcome to the community.

    Sorry, you have any questions.
    In your case, you may need to disable the ability of Windows 10 update the drivers for hardware devices.

    If you want to explore this, see: http://winsupersite.com/windows-10/stop-automatic-driver-updates-windows-10

    The dialog box has changed a bit after update 1511 (10586), but the process of getting it remains the same, and updates the driver through WU Win10 are stuck for me. I've updated one of my Win10 machines for the update of the anniversary and it apears that things are maintained.

    I hope this helps.

    Kind regards.

  • HP Pavilion 15-p259ng: graphics AMD Radeon R7 M260 with Win7: Error Code 43

    Hello
    I bought a laptop 'HP Pavilion 15-p259ng"without windows. I installed Windows 7
    64 bit on it. Then I istalled the downloaded "sp69351.exe" AMD graphics driver
    on the HP support site. Since then, the video card AMD Radeon R7 M260 is
    reports "driver arrested because the error has occurred (code 43)" on an ongoing basis.

    I tried to also update the other GPU (AMD Radeon R6 integrated on the main processor)
    with the same driver. This GPU is called "standard VGA video card" in the device
    Manager and there initially a Microsoft driver mounted, but the update was
    not possible, because on triing update by setting the path of the new
    driver (inluding subfolders) in the option "Update driver" in the Device Manager
    He sent the message "driver is up to date" and didn t accept the update
    (curiously, because used the Microsoft driver date is much older
    (06.21.2006) that of the AMD driver I tried to install (06.05.2014).

    Well that to uninstall the old Microsoft driver is possible, the problem with him
    Is that uninstalling requires a reboot and restart the older driver will be
    be installed again automatically without asking the user for confirmation.
    So I get back to my starting point.

    Besides that I see a PCI device without driver in the group "Other devices" in the
    Device Manager.I do not know if it can be related to the problem, but I
    do not either know where I could get the suitable driver for it.
    The hardware ID if it is the following:
    PCI\VEN_10EC & DEV_5229 & SUBSYS_2263103C & REV_01

    Anyone have an idea how the driver for the Radeon R6 onchip could be updated or
    any other idea to solve the problem?

    Thank you very much
    Fouad

    Hi @Fodi

    Welcome to the Forums of HP Support!

    OK, I understand you are trying to install drivers for your graphics card and integrated to your cpu.

    Actually you don't need to install separate drivers. It is covered by the main driver for your graphic card, when there are two an integrated and discrete gpu.

    As the error 43 - see this page: expand Code 43: Windows has stopped this device because it has reported problems

    Given that you have tried many times you may need to remove the two drivers and restart the system and allow the operating system to find the graphics integrated, before you install the driver for the device of AMD.

    All the different drivers for this laptop which was custom HP can be found here:

    HP Pavilion Notebook-15 p259ng - software & drivers

  • Satellite Pro 6100 Graphics Card upgrade/replacement

    I have a Satellite Pro 6100 p4 - m 2.0 30 GB and the graphics card is dead. I love this laptop.

    He had a NVidia GeForce4 420 Go 16 MB card

    I can replace it with a GeForce4 420 Go 32 MB of the same model.

    Is there something more powerful on the market that works without any problem for the 6100? That is to say. GeForce4 440 Go 64 MB?

    See you soon

    Usually didn t of toshiba offers an update of the separate graphics card but he had different graphics cards installed in your computer, and, THEORETICALLY, you can use each of these cards in your machine. I can't promise it but they should all work in this machine.

    The problem is to disassemble the machine completely and if you do something wrong then you know that it is useless to come back because your machine is no longer in warranty. It would be wise to give the machine a technician to exchange the graphics card.

    Unfortunately, I can't tell you what graphics cards in your machine or which partnumbers are needed. In this case you´re on your own.

    Good luck

  • Can I replace my graphic chipset with an integrated PCI Express graphics card?

    I am looking to update my graphics card. I did some research and learned that my motherboard is a N-Alvorix-RS880-Μatx (Yes, it has a PCI Express slot) and my current graphics card is an ATI Radeon HD 4200 (Chipset). Product information on my computer on the HP site said that "integrated into the graphics card or the card PCI Express x 16 slot are usable at once; they are not usable at the same time. "I don't know exactly what this means.

    Is it possible for me to get a new graphics card and use it on my computer? If so, what would I do with the current chipset graphic card? Or am I condemned to have to use my current lame graphics forever card?

    Thank you very much for the help.

    Hi Scott,.

    Please send the product code of HP to the exact address for your PC.

    When a video card is installed in the PCI-E x 16 slot, the bios will recognize this situation and will subsequently disable the motherboard integrated video processor.  It's one or the other but not both.

    Yes, you can put a discrete video card in your PC, but we need to know more information about your PC such as the size of the power supply etc.

  • Should I replace logic board or cable hard drive? MacBook Pro 13 mid 2012

    Hello guys I suffer for the last two weeks of my Macbook Pro would be grateful if you help me.

    Summary:

    A few months ago my mac has been slow and when I restart or stop it would take a minute or two, what has not happened in 2012-2014. In 2015, I decided to upgrade my SSHD HDD - Seagate 1 TB (that I'd need more space and a better performance). After that the upgrade of SSHD everything went well, my mac has been rapid, the battery has now 8 hours of battery life (440 + cycles). Overall it was a great experience! However during the night my frozen Mac even the mouse cursor, so I closed my Mac and it set in motion this time he showed me an icon of the slash. I disassembled my Mac and handed the stock HARD drive. This time, he showed the white screen without the disks. I tried several boards of various sites and one from the tip which has been WORKED safe mode! When I restarted, he returned to square one... I used the same trick but it didn't work. Now I see that a white screen on both discs, sometimes the issue icon flashes. Just for you find the hard disk turns but does not recognize... Although she acknowledged on my other Mac.

    I just remembered something just before this incident happened, I was cleaning up my Macbook with a small wet towel size (including the liquid soup inside) and then I cleaned the screen, the trackpad and keyboard (some liquid went inside the thing black screen and some of them inside the edges of the trackpad) but I them rinsed quickly. After 2 days, the slash screen appeared, and that's how it started.

    I removed the battery to see if there is any corrosion or something unusual about this, I also checked the trackpad, and it wasn't any dry liquid or dust, etc.

    Get to the point:

    Currently, I use my Mac through an external SSHD and everything works fine, but I want to stop using this method and thus solve the problem.

    Issues related to the:

    What exactly is the problem? Is my logic damaged Board and keep my HARD drive to recognize?

    Do you think that my card is fine, but I just need to replace the cable from the hard drive (821-1480) to a new?

    What happens if the hard disk thing stuck on the logic board or is damaged?

    Please help me and I'm sure that others are also facing a similar question. Another note, why some users claiming that their disk cable hard is to failure after replacing several times?


    We do not know "What exactly is the problem?". Get out your computer to an authorized for assessment service center. I suspect that you have caused water damage when the water and soup entered into your computer. Be prepared for a fix expensive since the water, not the soup ir and electronic works well together.

  • AMD A8 - 4500M APU with Radeon HD-overheating graphics card?

    Hello, I have a laptop HP ProBook 455 G1

    AMD Quad - Core A8 elite - 4500 M 1.90 GHz

    AMD Radeon HD 7640 G + Dual 8750 M HD graphics card

    Why are we in this program shows that the CPU temperature is high? And if it's possible.

    The computer does not reboot, works normally.

    http://prntscr.com/2f7858

    http://prntscr.com/2f7909

    http://prntscr.com/2f78gl

    And here's the temperature does nothing on their computers

    http://prntscr.com/2f78km

    Even if this program detects not only the high temperatures

    http://prntscr.com/2f7a9w

    I am from Serbia, and because the computer is under warranty, I sent it to an authorized HP service.

    http://h41191.www4.HP.com/SERVISI/

    I sent in

    NET Computer Engineering
    Novi Sad, elbow Ribnikar 52
    Tel: + 381 (21) 421 111

    They return my computer back and said everything was fine.

    I have to worry to the subject and with what program can accurately read the temperature?

    Hi Maxi69:

    Welcome to the forum!

    I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .



    I hope this helps.

  • AMD Radeon R5 M335 graphics card does not work in Lightroom CC

    Hello

    I have a laptop Windows 10 with 16 GB Ram and AMD Radeon R5 M355 graphics.

    When you use Lightroom, Develop displays blue screen until I have turn off the graphics card.

    Possible to use this map for lightroom?

    Hi nasre,

    AMD Radeon R5 is not among the list of graphics cards offered in accordance with this article: using Adobe Photoshop Lightroom | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom
    However, you can try to update the graphics card drivers and check if that helps.

  • HP 8200 elite CMT: can I use an external power supply for AMD Radeon HD graphics card 7770?

    I have HP 8200 elite CMT CPU in which 320 watts PSU is installed. I want to use AMD Radeon HD 7770 requiring more power (minimum 400 watts power supply) for maximum performance. But the fact is, the higher Watt PSU is not available for my cpu because its cables do not match that. So I ask if I can use the external power supply to power my GPU instead of the CPU power. Will be this harm to my PC?

    Kindly help me to solve this problem.

    Thank you

    Thank you for the information, @haseebkhan7310.

    I'm not a fan of using a separate power supply to power a video card.  It can cause problems.  However, here is a video that will show you how it can be done:

  • Update AMD Radeon 6770 13.1 m

    Hello, I'm sorry if this question is cliché, but I need the most up-to-date driver AMD Radeon 6770 m (I'm sure that most recent is 13.3) for my HP Pavilion dv7t - b 6, 00 CTO. I, like some of the other applicants, have this problem when I try to update my graphics driver from AMD, he argues that my card is incompatible and get my drivers at HP, who are overwhelmed by the years. Now, my driver is stable enough, but still crashes randomly during common tasks such as watching videos, etc.

    If it is not too complicated, I would greatly appreciate it if someone were to help him find my computer the driver proper.  Again, I am unable to use the AMD drivers from their site, and I can also use out-of-date drivers of HP.

    Thank you!

    You have a few options, but you must know a few things. You need to install .net Framework 4 before installation of the AMD Mobility drivers current after carefully read:

    http://Forum.NotebookReview.com/HP-drivers-software-Forum/556469-drivers-HP-DV6-4xxx-DV6-6xxx-dv7-5xxx-dv7-6xxx-envy-14-2xxx-envy-17-2xxx-Intel.html basically gives you the said link of 12.10 AMD mobility driver and you install it on top of HP driver.

    In any case before that you nothing creates a point of restoration if something is wrong. Things that you may experience with this pilot is dynamic switchable graphics may not work, but if you're like me propably you fixed mode from BIOS, fixed mode it works well.

    If you want to try AMD Mobility 13.1 also install .net Framework 4 pre-installed http://www2.ati.com/DriverS/mobile/13-1_mobility_vista_win7_win8_64_dd_ccc_whql.exe the installation procedure is the same as above.

    Things you can meet except the problematic dynamic mode is the question of the brightness. (You cannot adjust the brightness of the screen - the workaround is enable and disable card amd since the Device Manager or switch to Intel graphics card, then again to AMD.)

    And finally you can try leshcat, but the procedure is more complicated and they are third-party drivers, but if you want to try here:http://leshcatlabs.net/

    The current official driver is 13.1, 13.3 is beta in order to better stay away from beta versions.

  • Intel hd graphics with ATI Radeon graphics card replacement

    Hi, I use a computer hp laptop G62 b51SI with a processor intel hd graphics card. However, thinking about changing or supplementing with a graphics card ATI Radeon for gamiing increased performance. Is it possible to do?

    Hello:

    It is not possible without having to replace the motherboard together.

    There is no removable graphics 'cards' in your laptop.  The GPU is soldered to the motherboard.

    You will need to find a mother supported listed in the service manual for your model is equipped with better graphics and then try to find out where you can purchase a because it is unlikely that HP has more of them.

Maybe you are looking for