Should I wipe before sending it to Orange?

My camera has developed a fault (speaker of the inner ear does not), so I must refer to Orange, they said to keep the SIM card, battery, charger etc and I am having a new phone tomorrow. But if I remove my SIM card and switch on the phone can always access and send emails etc. Infact, just a connection and you have full access to my phone outside phone calls.

Should I be wiping the phone before that I send this back or what? Orange doesn't seem to know.

On another note, I have a few apps that I paid for. Where are they located on the memory card? I well there could be a simple way of cooking Apps, but I can't find them. They be saved in memory of phones?

I've now had to return my phone TWICE to orange. Whenever I have not wiped the phone and had no problems.

Regarding your question about paid apps, they are linked to your google account, but not the specific phone so when you get the new phone just connect you and your applications will be ready to re - download

Tags: Motorola Phones

Similar Questions

  • HP Deskjet 3720: Reshape the photo on the document of the iPhone 6 before sending it to the printer with the Remote AIO app.

    I have yet to adapt a picture with AIO HP application form document before sending it to the printer.

    Harvest funtion works on the next screen, but I don't get a reduced version of the original photo when moving the adjustment screen to another, despite the reorganization of the Blues and lines points (that capture the doc OK outline)

    I have one using IoS iPhone6 9.3.5

    Any ideas please?

    Hello

    Try to use the fit to the screen options in conjunction with cropping - because of differences in proportions between your phone photo and paper size, it will be very difficult to get in, but with the help of cultures and adjust to page, you should achieve something close to what you are after.

  • How to get the XML from the Request of Java object before sending. SOAP Web services

    I'm building Java request to Online Web Services and we'll call it application A . I got the WSDL forms the second part of the file in order to communicate with their application and we'll call it application B .

    Of the WSDL file generate the Java required classes that are Requests and Responses . classes Application A will send some request object after setting the parameters required and with the exception of response object of application B .

    The connection is established and the two applications A and B communicate with each other.

    Question:

    Of application A How can I get the xml data (or text file) for the request object before sending it to application B ?

    As described the connection is passing Java object such as request and I know that in some point this request will be converted to xml file. How to get it?

    -EDIT-

    Missing important information which can be confusing.

    I'm generated the Java rating were generated using the Axis framework

    The problem is solved by, add the following statements in the bindingStub class that was automatically generated from the WSDL file to the web-services you are trying to access.

       String request = _call.getMessageContext().getRequestMessage().getSOAPPartAsString(); 
     String response = _call.getMessageContext().getResponseMessage().getSOAPPartAsString();
    

    These statements should be placed after the following method call _call.invoke otherwise you will get NullPointerException .

    _callis a variable of type org.apache.axis.client.Cal and it is automatically generated byAxis

  • all I have to do with the ID files before sending the draft to the Publisher?

    Hello

    I am now very close to sending my Adobe InDesign files to Publisher/printer that will turn digital files into a paper copy hardback book.

    The printer asked the project Adobe InDesign file and photo/graphic/etc. files accompanying it.  This particular file is very large, because I took hundreds of pictures and whatnot, I used only some of them, of course, but others are still in the folder.  I'd hate to have to go through everything to winnow it down to ensure that the files that I used, because it would take some time... But do I have to?

    When I open my project .indd file, everything connects perfectly in the large data file (I know there is a better name for this, but I can't think of it right now) on my computer.  But it will work the same way if I send to the printer the two files on a 64 GB USB?

    (we both use Mac, which could help).

    I thought I should check before sending anything off the power.  I fear the idea of getting a call, saying that when they throw my .indd file, they get 266 errors (or even an errow).

    The printer is in a different city, which makes things a bit more complicated.

    Thanks for the advice, as always.

    Malcolm

    Use the Package feature (file > Package) to create a new folder that contains the InDesign file and only the link images you have actually used and do not forget to include a PDF file.

  • F & G Committee < ' F & G Committee' > is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message.

    Out with the new v.31.1.0, the: 2 September 2014 version of Thunderbird, I can email is no longer a list of recipients, getting the error msg: F & G Committee < ' F & G Committee' > is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message. In earlier versions, the addresses of individual e-mail in the list (F & G Committee in this case) are automatically placed in as the e-mail is sent. Is there a solution to this problem?

    Read this.
    https://support.Mozilla.org/en-us/questions/1019019

  • What should I do before selling iwatch?

    My Apple Watch was linked to an iPhone.then I reset the iPhone and sell it to another.

    now what should I do before selling the iWatch now?

    Hello

    Before selling your watch:

    • Pair it with your iPhone (if you bought another);
    • Disable iPhone pairing using the application of the watch.

    This will erase your watch and is also a reliable way to remove Activation lock him (so that a buyer will be able to pair the watch with their own iPhone).

    More information:

    Set up your Apple Watch - Apple Support

    Cancel the twinning of your iPhone - Apple and Apple Watch Support

    On the lock of Activation on Apple Watch - Apple Support

    https://help.Apple.com/watch/#/apdd3f9d7bc6

  • iPhone 6 have been saved to the icloud before sending it for repair but now cannot find relief in icloud to restore

    My screen iphone6 cracked this week before sending for repair, so I made a backup to icloud.  But now that I have the new phone (they replaced instead of repaired) I can't find the backup on the phone or through my iTunes account.  I'm looking for the backup?  It had all my contacts, music... everything!

    Thank you.

    The replacement phone may be necessary to update before it will see your backup. You cannot restore a backup made with a new version of the iOS on a device that is running an earlier version. Set up as new, updated to iOS, then delete it and try to restore the backup again.

    FYI: Music is NOT part of the backup.

  • Wait signal generator complete the scan list before sending the next command

    I am writing a program for Agilent E4421B signal generator scan to list between a range of frequencies (ramp up to the maximum frequency and then back down to the original frequency) specified. The signal generator has only a list of 401 points, which is a problem when I want to wash over a wide frequency range. To work around this problem, I would like to perform several scans of list in a row. However, I can't figure out an effective way to "say" the program to wait until the previous scan has finished before sending a new order of scanning for the signal generator. Any ideas? For reference, I use Agilent ESG drivers series LabVIEW.

    Thank you!

    If you use standard VISA calls, I would say just that send the scan command, but add; * mutual fund? (operation ends?) make a query.  Then, run a VISA to read what's coming.  This indicates to the device to send a 1 to the output buffer when the scan is complete (or just about any other operation, also).  As you are waiting for a response, your computer will wait the amount of time to wait so he could see a response, it is not less, your way with the exact amount of time - no more - to be actually taken.

    A few warnings:

    (1) make sure that the time-out is longer than the length of most slow scan.

    (2) there are variants of the '1' being returned.  I saw '1', '01', and even "1.00E + 3" therefore to allocate more than one byte to read."

  • Enter the characters before sending your message... What does that mean? What are the characters?

    That actually means "enter characters before sending your message?  What are the characters?

    Then I suggest that transfer you your question in the APPROPRIATE forum. This forum is NOTHING to do with Hotmail - as the title might suggest.

    Here are the HOTMAIL forum:

    http://windowslivehelp.com/product.aspx?ProductID=1&WA=wsignin1.0

  • When I click on before sending a message, I get a screen 'Silverlight.Configuration.exe' with an allow / do not allow permission.

    Silverlight.Configuration.exe

    When I click on before sending a message, I get a screen 'Silverlight.Configuration.exe' with an allow / do not allow permission.  I am also warned that it is outside

    My protection.  Recently started to receive emails of some of my address book to stop sending advertisements.  (which I did anyway)

    What is happening and is involved with Silverlight, you have an idea?

    Hello

    . What mail client do you use?

    . When was the last time it was working fine?

    . What antivirus software you use in your system?

    . Did you do recent changes with the hardware or the software before the show?

    Method 1: A clean boot helps eliminate software conflicts. Visit the link to learn how to perform a clean boot: http://support.microsoft.com/kb/929135

    Note: once the troubleshooting is complete, reset the computer to start as usual.

    Method 2: Also uninstall and reinstall Silverlight and check if it helps:

    http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

  • "Relay denied, must check email before sending. Help

    n Outlook I sometimes can't send e-mail. I get the message "relay denied, must check email before sending. I checked it all first... it's very frustrating.

    Relay attempts to send an e-mail through your ISP when you are not connected via your service provider (if you are in an Internet café or similar).  In this case, your ISP blocks the message sent, as some have used to spam people in the past.  So if you are connected to the Internet via another source as your ISP, you cannot send messages.  You can try to contact your ISP and telling them the question and see if they have a resolution for you (some have special settings, you can use).  Or maybe it's just a little problem on the ISP side, so it's a good idea to contact them in any case.

    Steve

  • What type of eloqua email send should I use to send an email more than once to the same beneficiary?

    What type of eloqua email send should I use to send an email more than once to the same beneficiary?

    In the canvas on the box email, there is a parameter that must be checked in order to send the same e-mail several times for the same contact. Enable 'Allow emails to be retransmitted to previous winners' and you're ready.

  • Edit the document before sending

    Is it possible for me to download a template and edit the document before sending it to a customer? I want to be able to keep my formatting, but also having the freedom to make adjustments to the wording of the contracts before you send them.

    Hi Jae,

    If you use a template, then I would recommend using "layer of reusable form field" and this is the same documentation:

    https://helpx.Adobe.com/document-cloud/help/reusable-form-field-layer.html

    Before that, you need to create by going to the dashboard-> add a template to the library and check the second option 'Create as a layer of reusable form field' and save it.

    Kind regards

    -Usman

  • Should I uninstall before installing PS CC Photoshop CS5?

    Should I uninstall before installing PS CC Photoshop CS5?

    It is not necessary.

    in general, you should leave it installed. you might need some plugin/device which is not compatible with the cc ps.  It's not likely, but you can wait and if you have no use for cs5 in a month or two, disable if (help > disable) and then uninstall it.

    and to be sure, you must secure your cs5 serial number in case you cancel cc a day and you want to reinstall your program cs5.

  • I just bought 12 elements. Should I uninstall before installing the elements 12 Elements 6?

    I just bought 12 elements. Should I uninstall before installing the elements 12 Elements 6?

    Hi Dm606,

    You don't need to uninstall Photoshop Element 6 before installing

    Photoshop SetupUpdates12.

    However, it's totally your voluntary decision to uninstall PSE6 but he won't give you any

    problem if the versions coexist.

    I hope this helps.

    Please let me know if you have any further questions.

    Kind regards

    Sumit Singh

Maybe you are looking for

  • Purchase of an iPad Pro with cell phone

    I'm looking on Ebay and find a number of iPad Pro which are unable to activate the cell, but can be used in wifi mode, because the IMEI was bad. I thought that all the iPad Pro had an Apple SIM and have been unlocked. Even if it were purchased from V

  • You can change the processor on a series of 2450?

    Hello The processor in a 420 2450 can evolve from a P4 2.56 to say, a P4 3.6? Thank you

  • How to turn off the lights under speaker on Satellite P100?

    I need to know if it is possible to TURN OFF the blue led underlight. (under the harman/kardon repro)laptop SATELLITE P100-387I dod not find it in Control Panel. Help, please

  • Vista system restore problem

    There is a version of system restore in Vista that doesn't seem to have the ability to allow me to choose a restore date. There is no radio button. How to restore to an earlier date without this feature?

  • 7 wireless printer problems

    HP Photosmart D110 all-in-one.  Stopped printing and copy, any blank pages.  Diagnosis shows all green checks.  Work was fine and just stopped