Should we stop BPEL process off carbohydrate to maintain a global operations

Similar Questions

• In the bpel process one-way transaction management

  Hello
  
  I created a one-way bpel process with oneWayDeliveryPolicy property - property Sync and transaction - required. When I exposed this service as a SOAP service, I see well The Participation of Transaction in the Web Service adapter in the way of exposed Services configured as EVER. Is this to say that BPELCallee would not participate in the same transaction as the appellant BPEL?
  
  Aditya

  Hello

  Properties refer to the support of different transactions "contexts", as you can see in the documents below. The bpel.config.transaction refers to the semantics of Transaction BPEL Process Manager, while the 'Participation of the operation' refers to WS-AT , which provides interoperability of transaction between Oracle WebLogic Server and transaction of other providers services... I've never tested it myself, but I guess that if you process BPEL transactions, the bpel.config.transaction will prevail...

  http://docs.Oracle.com/CD/E23943_01/dev.1111/e10224/soa_transactions.htm#CHDEHCFE
  http://docs.Oracle.com/CD/E23943_01/dev.1111/e10224/sca_bindingcomps.htm#SOASE86071

  See you soon,.
  Vlad

• Synchronous and asynchronous BPEl process

  Hi all
  
  1. when we can create a synchronous bpel process
  
  2. when we create a synchronous bpel process
  
  3. when we can create empty bpel processes
  
  4. how to deploy a project using a script? with the example.
  
  Thanks in advance...

  4. how to deploy a project using a script?
  http://jianmingli.com/WP/?p=2584

  1. when we can create a synchronous bpel process
  Synchronous process must create in case if you expect the answer immediately.
  e.g. it is useful in case if you use a card database as partner link in the BPEL process. Because the data base of operation of the adapter used to give the answer immediately.

  2. when we can create asynchronous bpel process
  Asynchronous process must create in case if you when will come answer are not have limitation in time.
  Example:-assume that if you have a single loan process in which we are citing some of the webservices (ex-United Star ready, loan HDFC) who will send interest charges in its response, but in this case the answer can come at any time. Until that time there need to wait an indeterminate BPEL process. If the BPEL Sync process will be used in the above case, then the BPEL process will expire and which will report to the failed State.

  3. when we can create bpel processes empty
  Define the Service later: Select this option to create an empty BPEL process service component without activities.

• SE Error (38): "Exec" should not not while implementiong Java Embedding in BPEL process

  Hi gurus,

  try to use Java Embedding function in BPEL process but could not import the Jar file in the BPEL process. Get "Error (38):"exec"should not. not " at compile time.

  I imported the appropriate java classes (placed after the < process > tag but before the < partnerLinks > tag in the process.bpel):

  < bpelx:exec import="java.util.*"/ >

  < bpelx:exec import="java.lang.*"/ >

  < bpelx:exec import="oracle.soa.common.util.*"/ >

  I use Jdev 11.1.1.7.0 and BPEL 2.0.

  Can someone help me on this, how to solve the problem?

  Thanks in advance

  SG_SOA

  Don't see the BPEL version you are using.
  S. Ananth is right. The syntax to import BPEL 2.0 differs from BPEL 1.1.
  To import a java class into BPEL 2.0, we need to use the following syntax:

  importType ="http://schemas.oracle.com/bpel/extension/java" / > ".

  Antonis

• Stop and start the bpel process in 10g

  Hello
  
  How can I stop and start a process bpel to automatically set time (say to Saturday 9 pm et we shud stop the bpel process and Sunday 9 HE we shud it again). Pls let me know.
  
  ADI

  Oh... I'm sorry. I have been misunderstood.

  I never did, but you can try with the java code (whether in another bpel process or just another application):

  API to disable the process BPEL (State = stop) in Oracle soa suite 10 g

  Tell me if it works for you.

  Arik

• BPEL process stopped polling after the displaced Table

  Hello
  
  Oracle 10.1.2
  SOA Suite 10.1.3.4
  
  We have a process BPEL has been deployed and working for a while. This process is defined to query a table in every 5 seconds and set the State on BPEL_POLLED once found. It was working fine until I dropped and re - recreates the table that was questioned. (No changes have been made to the structure of the table - I was mearly testing a build script).
  
  This table was recreated, the BPEL process stopped polling. I have re-deployed service, stopped and started the server and it is not the voting table.
  
  May I take it that drop and recreate the table being queried have an impact on the electoral process and I looked through the forums, but I don't really know what I'm looking for?
  
  I'm not a developer, BPEL, however I was left the task of working through this, any help would be appreciated.
  
  Concerning
  
  JB

  Hi James,
  This is an expected default behavior (in 10.1.3.4 MLR #7 from at least). The State of the process is set to 'stop' if the vote fails with a SQL error. If you look at the log file, after you turn on debugging, you'd be able to see an explicit message that indicates that the process is currently disabled.

  If you simply change the status of the process to 'On' even once, it would begin returning.
  Or to be on the safer side, if you want to change the structure etc. of the voting table, its best to withdraw from the process, modify the table and then activate the process.

  Hope this helps,
  Kind regards
  Yohanna.
  http://www.prshanmu.com/articles

• How many times should I stop my MacBook Air

  I have a MacBook Air (early 2014), with a processor i5 and 4 GB of RAM. It will be 2 years from November 2016. Summer's going hard for me for a while now and works very well without any problems. I use applications like Final Cut, Motion 5 and Xcode and I am satisfied with the performance of such a light machine.

  Apart from the information on my Mac, I have a question about proper use to optimize the performance and life of it. How many times have I stopped him? I use my Mac a day should I allow to sleep when I do not use as it has little effect on the battery and allows me to pick up where I left off. Should I only stopped when loading or is it okay to sleep by loading too? Should I stopped him every month or so or just during the software updates as I prefer to leave is majority of sleep of the time it won't have a long amount of time without me using it.

  Thank you.

  If you do not meet the pigs of RAM, there is really no reason to close it. If you don't see the warnings of memory, a simple reboot menu Apple fade issue.

• How can I fix my windows vista stops the process?

  When I run normal stops the process, the system seems to want to close normally, but then was hindered in the phase "forest operations off the coast. I let the computer take its course at night, only to find tht the next morning, he is always "logout".

  Hi Beachdubber,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to check and clean the boot if the problem persists.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• 2610 suddenly stopped to turn off ink

  Hello

  My 2610 all in one suddenly stopped to turn off ink.  The day before, it was working fine, then when I turned on the next day, he goes through the same motions, but no ink comes out.  I print in black only.

  Thanks for any help

  HI - go ahead and try following the steps described in this document.  It guides you through printing the diagnostic page should help pinpoint the problem.  If you see no black on the diagnostic page, it could be that the cartridge is empty or the nozzles are clogged.  To try to solve the problem with clogged nozzles, try the procedure described in this document.  If this does not resolve the problem, you will probably have to replace the cartridge (this is of course assuming you see no black on the diagnostic page.

  Hope that helps.

• The security token cannot be authenticated to exposed SOAP BPEL process

  Hi all

  I have a BPEL process that I'm outlining like SOAP web service that conducting a policy of oracle/wss_username_token_over_ssl_service_policy . The BPEL process does nothing with the identifying information that is passed (in fact, I stripped everything out of him so that there is no anything). When I test the web service using soapUI I get the following error message: FailedAuthentication: the security token cannot be authenticated. Anyone have any ideas why?

  This is the payload sent to the service:

  " < = xmlns:bpel soapenv:Envelope ' http://xmlns.Oracle.com/TestBPEL/project/BPELProcess "xmlns:soapenv =" http://schemas.xmlsoap.org/soap/envelope/ ">

  < soapenv:Header >

  " < xmlns:wsse wsse: Security = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd "xmlns:wsu =" " http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd "soapenv:mustUnderstand ="1"> "

  < wsu:Timestamp WSU: ID = "TS - 10" >

  < wsu: created > 2013 - 10 - 07T 21: 16:16Z < / wsu: created >

  < wsu: expires > 2013 - 10 - 07T 21: 16:48Z < / wsu: expires >

  < / wsu:Timestamp >

  < wsse: UsernameToken WSU: ID = "UsernameToken-9" >

  WJR < wsse:Username > < / wsse:Username >

  " < wsse:Password Type = ' http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText "> CBA < / wsse:Password > .

  " < wsse:Nonce EncodingType =" http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-SOAP-message-security-1.0#base64Binary "> 2460zn8mTqCxdB6XS65Ixg == < / wsse:Nonce > .

  < wsu: created > 2013 - 10 - 07T 21: 16:16.577Z < / wsu: created >

  < / wsse: UsernameToken >

  < / wsse: Security >

  < / soapenv:Header >

  < soapenv:Body >

  < bpel:process >

  " < = xmlns:bpel bpel:input ' http://xmlns.Oracle.com/TestBPEL/project/BPELProcess ">? < / bpel:input >

  < / bpel:process >

  < / soapenv:Body >

  < / soapenv:Envelope >

  Hi Bill,

  The message is pretty clear "FailedAuthentication: the security token cannot be authenticated. There should be something wrong with your security configuration... The fact that your code doesn't do anything with the credentials doesn't mean anything, as long as you have politics, you must pass a valid authentication...

  See you soon,.

  Vlad

• Reading file and dump the data into the database using BPEL process

  I have to read the CSV file and insert data into the database... To do this, I created some asynchronous bpel process. Adapter filed added and associated with the receive activity... Adapter DB has added and associated with the Invoke activity. Receive two total activity are available in the process when trying to Test em, receive only the first activity is complete and awaits the second receive activity. Please suggest how to proceed with...

  Thanks, Maury.

  Hi Maury,

  There is no need in step 2 that u mentioned above. I donot find useless a webservice?

  The process will be launched by the CSV file, then using the processing activity, you can put it in the DB.

  There should be no way where you can manually test it by giving an entry. All you can do to test is to put the file in the folder you mentioned when configuring the file adapter.

  You just need to have the composite as below:

  ReadCSVFile---> BPEL--> DB adapter

  And in your BPEL process:

  Recieve--> Transformation activity--> call activity

  Try to work on some samples listed on the oracle site and go through the below URL:

  The playback of the file adapter feature using

  Thank you

  Deepak.

• Political fault does not (BPEL process-Async)

  Hi gurus,
  
  I want to use the framework of fault management in BPEL process
  
  Scenario 1
  =====================================================
  I have an asynchronous BPEL process that calls a Web service and I created a loophole - policies.xml and fault - bindings.xml and put both of them in the same directory of Composite.xml structure.
  
  I want to take the 'remoteFault' so, while running, I shutdowned this particular Web service. So, asynchronous BPEL process is able to throw the fault of the system, but the fault policy does not work. As a message is to show that "* BPELFault" has not been taken by a catch block * "."
  
  
  * Flaw - policies.xml: *.
  *==========*
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < faultPolicies xmlns = "http://schemas.oracle.com/bpel/faultpolicy" >
  < faultPolicy version = "2.0.1" id = "ErrorHandlingModel1".
  xmlns:env = "http://schemas.xmlsoap.org/soap/envelope/".
  xmlns: XS = "http://www.w3.org/2001/XMLSchema".
  xmlns = "http://schemas.oracle.com/bpel/faultpolicy."
  xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" >
  < condition >
  < faultName xmlns:bpelx = "http://schemas.oracle.com/bpel/extension".
  name = "bpelx:remoteFault" >
  < condition >
  < Ref action = "ora-retry" / >
  < / condition >
  < / faultName >
  < / conditions >
  < action >
  < Code action = "ora-retry" >
  < retry >
  < retryCount > 5 < / retryCount >
  < retryInterval > 2 < / retryInterval >
  < exponentialBackoff / >
  < retryFailureAction ref = "ora-abort" / >
  < / re >
  < / action >
  < Code action = 'ora-abort' >
  < abort / >
  < / action >
  < / actions >
  < / faultPolicy >
  < / faultPolicies >
  
  
  * Flaw - bindings.xml: *.
  *===========*
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < faultPolicyBindings version = "2.0.1".
  xmlns = "http://schemas.oracle.com/bpel/faultpolicy."
  xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" >
  < item faultPolicy = "ErrorHandlingModel1" >
  < name > TestBPEL < / name >
  < / component >
  < / faultPolicyBindings >
  
  
  
  Are there steps are necessary to achieve appropriate results.
  
  Help, please.
  
  Thanks in advance

  No need to change all the properties in the composite.xml file, when you place the two files in the project directory where the composite.xml file, it should work.

  See the sample files I posted here, it should work, please check the syntax. Also in the file fault - bindings.xml, apply the policy the fault for the composite.

  See my post in the thread below.

  fault-links and sample files of strategy of fault for 11g

  Hope this helps
  N

• Insert SOAP headers into BPEL process

  My requirement is to insert information from the header to the request parameter, the header information consists of the user name & password.
  
  Header is given below.
  ====
  < soap: Header >
  < wsse: Security SOAP: mustUnderstand = "1" xmlns:wsse = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
  < wsse:Username > ClientDev < / wsse:Username >
  < wsse:Password Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" > ClientDev123 < / wsse:Password >
  < / wsse: Security >
  < / soap: Header >
  ======
  My request message is given below after extraction of wsdl. (header information are not in the wsdl part) but it will add to each request in the section header when sending to the application target using the SOAP request.
  ======
  < xmlns:soap: envelope soap "http://schemas.xmlsoap.org/soap/envelope/" = >
  < soapenv:Header / >
  < soap: Body >
  < GetTaxCodes xmlns = "nvsos.gov" >
  < EntityTypeCode > 10 < / EntityTypeCode >
  < / GetTaxCodes >
  < / soap: Body >
  < / envelope soap: >
  ======
  the requirement, inserting the soap request: header in the request parameter and send it to the target system, it is a failure without inserting the header information in the query.
  ====
  
  the following steps created...
  
  Created a 'SOAPheaders.XSD' file with the next item.
  
  <? XML version = "1.0" encoding = "windows-1252"? >
  < xsd: Schema container = "http://www.w3.org/2001/XMLSchema".
  xmlns = "http://www.example.org/SOAPheaders."
  targetNamespace = "http://www.example.org/SOAPheaders."
  elementFormDefault = "qualified" >
  < xsd: complexType name = "SΘcuritΘ" >
  < xsd: SEQUENCE >
  < xsd: element name = "User name" type = "xsd: String" / >
  < xsd: element name = "Password" type = "xsd: String" / >
  < / xsd: SEQUENCE >
  < / xsd: complexType >
  < xsd: element name = "SOAPHeader" type = "SΘcuritΘ" / >
  < / xsd: Schema >
  
  In .bpel file added the following variable (username and password)
  < variables >
  <! - referring to the message as input during the initiation - >
  < variable name = messageType "variableentree" = "client: BPELProcessRequestMessage" / >
  < variable name = "Username" element = "client: username" / >
  < variable name = "Password" element = "customer: password" / >
  < / variables >
  
  and added the variable in the invoke method above using bpelx:inputHeaderVariable.
  < name = "receiveInput" = "bpelprocess_client" = portType partnerLink ' client: BPELProcess "operation = 'process '.
  variable = createInstance "variableentree" = "yes" bpelx:headerVariable = "Username, password" / >
  
  but getting undefined variable error.
  Error (48): Message WSDL Type "{http://www.example.org/SOAPheaders} username" of the variable "Username" is not defined in the WSDL files
  Is this a good approach, or any other approach is here...
  
  Any help.
  SK

  Hello:

  Try to create a variable like this:
  

  Ns2:SoapHeader is and element of http://www.example.org/SOAPheaders

  and your invoke should look like this:

  
  partnerLink = "Service1" portType = "ns1:BPEL_TEST."
  operation = "process" bpelx:inputHeaderVariable = "customhead" / >

  in your process, simply create an entitlement to fill both the username and pwd elements.

  I hope this helps.

  The best

  Published by: Rolando Carrasco on March 1, 2012 19:24

• BPEL process times out after 5 minutes

  Hello
  
  I created an asynchronous BPEL process that calls a view that takes time to give all of the records; While the process is invoking this database adapter, my process ends abruptly with the following error after 5 minutes
  
  Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run operations reference 'CAMPAIGN_BATCH_COUPONS_VSelect' have to: DBReadInteractionSpec Execute Failed Exception." Name of the query: [CAMPAIGN_BATCH_COUPONS_VSelect], the descriptor name: [CAMPAIGN_BATCH_COUPONS_V.WcCampaignBatchCouponsV]. Caused by java.sql.SQLTimeoutException: ORA-01013: user has requested cancellation of the pending operation. See the first exception for the specific exception. This exception is considered as reproducible, probably due to a communication failure. Because the overall transaction is reversing the invoke should be retried in a new transaction, restart from the place of the last committed transaction. To be classified as not reproducible instead, add nonRetriableErrorCodes property to "1013" deployment descriptor (i.e. weblogic - RA.Xml). ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution.
  
  It seems that my approach is expired. Can I do for her to not expire like that?
  
  
  Can someone help me on this please?
  
  Thanks in advance.
  
  Published by: user1165407 on Sep 6, 2011 16:19

  Try to increase the JTA timeout in Admin Console... keep this value according to your business needs...

  Take a look at this...

  http://sudhakarsoa.blogspot.com/2011/03/How-do-you-configure-transaction.html

• Working with its imperfections - how to stop BPEL after failure

  Hi, all ~
  
  I'm a bit confused... After spending time as a java programmer in a previous life, I tend to think that, unless a try-catch is around a block of code, if an exception is produced, my code will stop the treatment at this time.
  
  In SOA 11.1.1.4, I have a BPEL process that sometimes throws an exception of binding when you try to run a procedure stored in a DB Oracle (I'll post probably a second thread on this).
  
  The part which is strange to me is that the BPEL process continues the procedure if this failure... so I'll get a fault of my 'getData' stored procedure and then the BPEL process will continue and attempt to publish the data (zero) in the subscription process (which naturally translates additional errors).
  
  .. is this normal behavior? I would have thought a BPEL process would be an anomaly of State (or mitigated) when an error occurs, but maybe not...?
  
  Thanks in advance,
  
  -Nathan

  Hi Nathan,

  You can catch the error that occur in the BPEL and Terminate activity lets you stop the BPEL process.

  Kind regards
  Neeraj Sehgal