Should what type of data store I use in VSphere Hypervisor

Similar Questions

• Re: Should what type of HARD drive I use to replace the 20 GB on Satellite 1400-103?

  Dear Sirs:

  After many years, my S1400/103 still offers me a great service.
  I wander if I change the hard drive with a larger and possibly faster compatible unit.
  You will be please so kind and remind me of the motherboard/bios card limits, if any, about HD drive geometry?

  Any limitation applies to the speed of rotation of HD?

  My BIOS version is 1.30 (02/07/2002)
  Model number is PS140E-03CSQ-IT

  Thank you for your attention

  Usually, the BIOS on different computers Toshiba Notebook doesn t recognize and support all HARD drive sizes. The laptop supports hard disks from 20GB. So, in my opinion you might also try to insert a 60 GB IDE (ATA - 4) HARD drive.

  The rotation is not very important. I think that the laptop should support 4 200 rpm and 5400 RPM hard drives too.

  concerning

• How to specify what data store for use with OVFtool

  It drives me crazy! Way that you specify what data store to use when there are several?

  I ran exactly the same command on a box that had a data store and it worked fine (as expected). He created the folder of the virtual machine to the root of the SD and then pulled on the virtual machine of the FVO. However, with multiple it just says not: no datstore target specified. I tried 1 million combinations of?-ds = with hooks, without. It is said to be sometimes found in the inventory. I guess that's looking for a folder. But this cannot be so difficult?

  C:\Program VMware OVF tool & gt; ovftool P:\Downloads\PanoManagerVM-2.8.0

  -ovf\panomanager.ovf ' vi: / / [email protected].

  Source OVF opening: P:\Downloads\PanoManagerVM-2.8.0-ovf\panomanager.ovf

  ATTENTION: No manifest file

  Please enter the login information for the target vi://192.168.1.5/

  User name: root

  Password: *.

  Target of opening VI: vi: / / [email protected]/

  Error: No data store target specified

  Data warehouses is on target:

  SAN storage

  storage1

  something like

  OVFTool - ds = "SAN Storage" source target

  should work

  If you write ovftool - help you can see the full syntax.

  Eske

• VSA data store to use?

  I finished installing the VSA trial on a 2 host cluster. It works well, but I didn't know that there are 2 different available data warehouses. Does it matter that it used during the passage of my test virtual machines to the ASB? I usually tried keeping the VM with what I suppose is the host local esxi (1 host 2 host uses uses VSADs-1, VSADs-0).

  In addition, these data stores can be filled up completely and still be functional as a HA system?

  Thank you

  Hello

  It does not matter what VSA data store you use to move your virtual machines to the cluster of VSA, and HA should work even when the two VSADs are "almost completely filled" (if there is literally no space left then VMs can not not restart/market, which is true for any data store not only VSA-data warehouses).

• What type of DVD can I use for backup of Windows?

  I'm wanting to make my backup of Windows and I was wondering what type of DVD media I use. Is it better to use a RW or one R type DVD.

  I have a HP Omni 220-1180qd, A5W89AV #ABA, Win7 64 bit running.

  I thought I read it can use CD, DVD, but I want to know which would be the best choice.

  Thanks for any help and any help is appreciated.

  Honestly, an external hard drive would be a better choice. The difference between-R and + R/W is only + R is "Writable" and + R/W is "Re-Writable. If you intend to do periodic backups, go with an external hard drive... If you intend to make backups very little, consider DVD + R discs.

• Can I use VMware vSphere Hypervisor™ with vSphere Client?

  It's the question next poped upward.

  -Can I freely use for my business need VMware vSphere Hypervisor™, and what will be the difference with VMware vSphere Starter Kit?

  and

  -Can I use VMware vSphere Hypervisor™ with vSphere Client software for free?

  Yes - it is freely permitted, but he he has limits and lack of features compared to the vSphere Essentials kits. Another thing to note is the absence of vCenter Server to manage multiple ESXi hypervisors with the free version. The backup API are, in my opinion, one of the main obstacles to the use of this.

• Should what type of disc I use to copy pictures on a disc?

  Original title: what type of disc should I use to copy pictures on a disc. I tried memorex cd - r 40 x and also cd - r 52 x, and they do not work

  copy pictures to a disc

  Hi stv2741,

  1. you use any DVD burning software?

  You can use any type of recordable disc to burn images. You can check the following links for more information:

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn pictures or videos to a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Should what type of license for Windows I use for a company that will have a Web site?

  Hello

  Could you tell me please what type of license for Windows should I buy for a company that will have a Web site (without space)?

  I mentioned that I'll keep maintaining for her by a CMS, and I bought the hosting and domain.

  Forward to your response.

  Best regards

  F.

  • client Windows (for example, 7, 8, 8.1, 10) Limited has somewhere around 5 concurrent connections. and costs up to $300.
  • Server cost $1000-$1200 and comes with 5 licenses client [connection] or however any extra you pay.
  • You can configure a web server using this (local, apache already sets up LISTENING to hang on to all of the network adapters using the *-http://jesusnjim.com/web-design/setup-test-server.html)

• Should what type of destination I use

  We have a client who's concerned about damage to the physical system during shipping. As a precaution, I was invited to P2V server for import into their ESX 3.5 environment.

  I got several different answers support so, I wanted to try here. I'll be the choices of others, but what type of machine should I choose if the image will be imported into ESX 3.5. The choices are:

  • Workstation 6.x, VMware Fusion 1.x, 2.x, 2.x ACE player

  • Workstation 5.x, VMware Sercer 1.x, player 1.x

  • Workstation 4.5 x, AX 1.x, GSX Server 3.X

  I think I got 3 different answers of 3 different engineers?

  No one who will work - the closest match is compatible Workstation 5

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Cancellation of the assignment and reassign the data store by using different LUNS that datastore has not appeared.

  Hi all

  I have a data store after vdisk1 I have not assigned the vdisk to data store and reread the esxserver, the data store has disappeared.

  Again, I assigned the vdisk using the same number of logical unit as before and reread the esxserver, datastore appeared again return.

  But if I use a different assignment vdisk lun and on a new analysis of data store does not appear.

  Can someone tell me if the LUN must be even to see the store of data back again.

  If so why. ?

  Is there a vmware documentation to substantiate this claim.

  concerning

  Neela

  What do you mean by vdisk1?  The data store are stored as metadata on the LUN, when is formatted VMFS.  If you remove the LUN the VMFS is sitting on, then Yes, the data store will disappear.  If you only remove the vmdk who lives on this data store, then no, the data store must remain as it is, and you should be able to move the vmdk on the data store as needed.

  -KjB

  VMware vExpert

• Can what type of 3D glases I use with my Toshiba 58L7363D?

  Hi @ all.

  IAM new here.

  IAM 33y old, married and has two children.

  I bought a Toshiba 58L7363D (no DG) last year.

  Now my kids want to start with BlueRay´s 3d.

  I have a 3D BlueRay Player.

  Now my question... What type of 3d Glases should?
  Shutter? Or just the passive?

  I can't rly find the right answer here or on Thosiba Homepage.

  I hope you understand me... my English is not rly the best... :(

  Thx for the answers and have a nice day.

  CU Funameise

  Post edited by: funameise

  In the manuals of the user to the page 29 s, I found the info you need active 3D glasses with the FPT-AG03 part number.
  To be honest I m wondering really none of them came with yor TV.

  In any case, use this part number and you can separately order 3D glasses.

  Good luck and enjoy your 3D TV.

• What type of file to be used as accessory jpg or pdf?

  I scan documents and then these attachments to different companies.  I have a new printer and it allows me to choose what type of file I want to download: jpg or pdf.  Can you tell me what the file is the most common most businesses to view documents?

  Friday, June 22, 2012 17:00:05 + 0000, plpsp wrote:

  I scan documents and then these attachments to different companies.  I have a new printer and it allows me to choose what type of file I want to download: jpg or pdf.  Can you tell me what the file is the most common most businesses to view documents?

  Companies can almost certainly view or the other guy, but a pdf file
  should be better for documents. A jpg file is almost never used
  for anything except the photos.

  Ken Blake, Microsoft MVP

• vCenter showing this vm in two data stores (a used display 0.00 B of 12.66 GB space)

  I have a couple of VMs that according to vCenter are present in multiple data stores. In all cases a data store would be showing 0.00 B of xx.xx GB used space.

  

  Is there a way to fix this? All I can think is that at some point the virtual machine could have migrated from one to another data store. It's never been renamed; Among the stores of data has no file like below...

  vCenter 5.5.0 2183111

  ESXi 5.5.0 2456374

  last vm compatibility of equipment and tools.

  What is visible on the page summary for the virtual machine:

  

  But if you look at the two warehouses of data - the virtual machine is present in the data store 4:

  ~ # ls - the/vmfs/volumes/ESXi1-datastore4/dc1

  Total 13286440

  drwxr-xr-x 1 root root 4480 25 Mar 08:34.

  drwxr-xr-t 1 root root Mar 23 1820 10:17...

  -rw - 1 root root 134344704 6 March 18:42 dc1-000001 - delta.vmdk

  -rw - 1 root root 310 6 Mar 18:38 dc1 - 000001.vmdk

  -rw - 1 root root 1895952384 24 March 15:16 dc1-000002 - delta.vmdk

  -rw - 1 root root 343 24 March 15:03 dc1 - 000002.vmdk

  -rw - 1 root root 50458624 25 March 09:14 dc1-000003 - delta.vmdk

  -rw - 1 root root 317 25 Mar 08:34 dc1 - 000003.vmdk

  -rw - 1 root root 16904192 24 March 15:17 dc1-000004 - delta.vmdk

  -rw - 1 root root 317 24 March 15:17 dc1 - 000004.vmdk

  -rw - 1 root root 28969 6 Mar 12:35 dc1 - Snapshot1.vmsn

  -rw - 1 root root 29000 6 Mar 18:47 dc1 - Snapshot2.vmsn

  -rw - 1 root root 32015 24 March 15:17 dc1 - Snapshot3.vmsn

  -rw - r - r - 1 root root 120 24 March 15:17 dc1 - to the .xml

  -rw - 1 root root 2147483648 25 Mar 08:34 dc1 - bbbf052e.vswp

  -rw - 1 root root 64424509440 6 March 12:35 dc1 - flat hard

  -rwx - 1 root root 290136 24 March 15:17 dc1 - vss_manifests3.zip

  -rw - 1 root root 8684 Mar 25 08:35 dc1.nvram

  -rw - 1 root root 540 6 Mar 11:01 dc1.vmdk

  -rw - r - r - 1 root root 24 Mar 1245 15:17 dc1.vmsd

  -rwxr-xr-x 1 root root 3536 25 Mar 08:34 dc1.vmx

  -rw - 1 root root 0 25 Mar 08:34 dc1.vmx.lck

  -rw - r - r - 1 root root 3258 24 March 15:17 dc1.vmxf

  -rwxr-xr-x 1 root root 3535 25 Mar 08:34 dc1.vmx ~.

  -rw - r - r - 1 root root 554141 6 March 12:35 vmware - 3.log

  -rw - r - r - 1 root root 225262 6 March 18:36 4.log - vmware

  -rw - r - r - 1 root root 160708 6 Mar 18:42 vmware - 5.log

  -rw - r - r - 1 root root 219307 Mar 16 11:21 6.log - vmware

  -rw - r - r - 1 root root 245326 24 March 15:17 7.log - vmware

  -rw - r - r - 1 root root 214032 24 March 16:19 vmware - 8.log

  -rw - r - r - 1 root root 192487 Mar 25 08:35 vmware.log

  -rw - 1 root root 114294784 25 March 08:34 vmx-dc1-3149858094 - 1.vswp

  data store 3 has nothing and I am sure that this virtual machine was never renamed etc.

  ~ # ls - the/vmfs/volumes/ESXi1-datastore3/dc1

  LS: / vmfs/volumes/ESXi1-datastore3/dc1: no such file or directory

  Your virtual machine based on the list of files, runs from snapshot and maybe the State of the virtual machine before taking the snapshot has been using the ISO on the old data store. If you can, try to remove the snapshot and the reference to the old data store will be deleted.

• Data store space used not maching between VMWare and 3PAR

  Hello world

  I have a strange behavior between our environment VMWare and 3PAR storage system.

  I checked each data store of our cluster and for each of them, the space used in vSphere Client does not match the size of the user 'used' their volume associated with 3PAR.  The value displayed in VMware is higher.

  For example, our data store named DS03 has space around 1 TB in VMWare.  And when I checked in the Console of 3PAR, I see that the volume created for this data store has a size of the user 'used' 722 GB.

  While doing some research, I came across this post: ability to store data about the free space is not the same thing in VMware and 3PAR

  But the problem I encounter is quiet different. It's the opposite. I do not understand why the displayed value is higher in VMWare...  We are also running vSphere Server version 5.1.0

  Any advice? Ideas?

  Thank you very much.

  It's the ASIC 3PAR inline zero detection function stripping zeros of incoming data until they land on the disc. Www.3parug.com try this happens a lot.

• Using synonym as data store can use Incremental update IKM

  Hello
  
  can we use synonymous as the target data store, if yes can we use incremental update IKM on it.
  
  Please let me know.
  
  Thank you

  Yes, you can use.
  Thank you