Should which partition I format it?

Similar Questions

• I tried to import my vcard to icloud, which is in format .vcf. It is projection 300 contacts could not be imported because there was a problem to read. What should I do to import them.

  I tried to import my vcard to icloud, which is in format .vcf. It is projection 300 contacts could not be imported because there was a problem to read. What should I do to import them.

  You could try to export your contacts into smaller groups

• If I want to keep the quality of the original captured images (from tape), which is the format that I should?

  I captured canon hv20 in FireWire to my computer with adobe first elements 11. After the capture, I cut clip three times. Then I want to export my computer due to watching on my 46 inch lcd TV full hd. If I want to keep the quality of the original captured images (from tape), which is the format that I should? I chose mpeg 1440x1080i 24, TI alerts for error. Or I premise avchd 1920 x 1080 p, then it is also more scenes captured. I think it's 20000 MB, scened (without cutting) but captured only 11.2 GB. Please help me. Thank you very much.

  I would firstly like to thank you for answering my question. My camcorder is canon hv20 PAL. When I look at the setting of the project, it's HDV 1080i 25 frames per second anamorphic. Duration of the timeline is 56 minutes. I'm sorry about misinformation in an adobe forum. Yes you are right this is not MPEG 1440x1080i 24. I chose MPEG and choose MPEG2 1440x1080i 25 and it convert .m2v file. I couldn't see because Windows media player does not open the m2v files, but I didn't do anything about in order to open the file. I want to learn: my initial project captured is 11.2 GB. But shows on screen m2v files is about 21000 MB. This means that 20 GB! It is same quality my project captured MPEG) and Cup project m2v? What is another way to export? I'm sorry that even once it does not error message about the m2v files. I think I got confused, I think when I chose MPEG, 25 HDTV high quality, I saw the error message but I don't know what is the error message.

• Impossible to delete the partitions or format C

  I have a mobile shadow Smart Power (a special Aldi 2004), which comes with no hidden restore disc, but it has a much utility and disk etc. drive OEM drive.  I need to reformat C and reinstall XP Home... nothing seems to work - after surfing several hours for a reply and try to all the ones I found!  I can not get an option to format using disk management, because it is grayed out, and if I use the disc provided as a boot disk, I can't delete the partition as it says that it is in use / mounted.  Can anyone help please... as I suspect that the XP disc resembles C and just by looking at him, he believes that it is in use, so it will not let me delete the partition or format C.  I don't know how to get around this problem with the discs that I have... and experience tells me that shadow are desperate for assistance to the user, so there is probably no point of contact with them.

  All I can understand about shadow is that it was an Austrian company which has since been bought by a Taiwanese company and has almost no information available online support (although there seems to be quite expensive telephone support lines).

  You cannot remove or format the system partition (the one where Windows) of Windows.  This is why there are bootable CD installation/restoration of the system, the idea being that if you run with an operating system on the CD, you can do what you like on the hard drive.

  Your drive "OEM", is supposed to be a system restore disk or just a collection of software and drivers?

  If it is a restore disk, when you start from it, it should just restore the computer to its original state, or at least give you an option to do so.

  Can you describe the screens that appear when you start from your OEM drive?

• How to recover pictures on SD SanDisk card 512 MB, which was quick formatted?

  How to recover pictures on SD SanDisk card 512 MB, which was quick formatted under Windows XP SP3?

  The SD card has been affected through SanDisk Imagemate 12 in 1 model number: SDDR - 89 V4.

  The camera was a digital pocket old KODAK cam 4 years... (Sorry that's all I know for the camera)

  Thank you

  P.S. I think remember that names of index files are changed? Is there an easy Undo?

  I haven't used any of them personally, but there is a certain utilities - free - many who claim to be able to recover pictures from SD cards and similar media, even after a format.

  Recuva, which is free, should be able to recover the images from your SD card after a quick format.  Or try this: http://lmgtfy.com/?q=recover+files+from+sd+card

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• Photos saving disk space to share images with your iPhoto or Aperture libraries.  Should which library I use to remove old photos?  If I delete old photos in iPhotos appear in pictures and vice versa?

  Should which library I use to remove old photos?  iPhoto or Photos?

  If you migrated a library iPhoto to Photos and you want to release the storage, you should remove the pictures of these two libraries.

  Related photos storage only comes out, after that the last linked file has been deleted.  If you do not use more of the iPhoto library, move it to a backup drive. Then simply delete the photos of your new photo library.

• Satellite L655-178 - which partition will be available to start?

  Hello

  My Satellite L655-178 comes with active EFI Insyde H2O Bios. Apparently this BIOS needs to access the HARD disk before starting Windows. Nobody knows in which partition occurs this pre-start HARD drive access?

  My laptop has 3 partitions on a 500 GB HARD drive
  -400 MB Hidden Partition (without drive letter assigned)
  -C: Windows Partition
  D: a Partition of data (with HDD recovery)

  My guess is the Insyde H2O Bios to access the Pre-boot 400 MB hidden partition?

  Am I wrong?

  Thanks :)

  Hey,.

  Your question is interesting, but may I ask why is it important? Serious errors on your laptop?

  Well, first of all, you know that the 400 MB hidden partition is not the boot partition. It contains only the files of Windows recovery environment and cannot be accessed during boot I think. Just read this article:
  http://en.Wikipedia.org/wiki/Windows_Recovery_Environment

  As you can see, it s a Windows feature and has nothing to do with Toshiba.

  In any case, the start player C: partition will be accessible for on this Windows partition is installed. All that s!

  But until Windows starts, the BIOS HARD drive search internal, but it doesn't have access to all data of it. The BIOS simply check if an internal HARD drive is installed and it is indifferent to what you have on it of the partitions.

• should which driver I download? Help me

  Hello

  probook HP 4540 s base model

  my product number: A5S82AV

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  should which driver I download?

  me the direct download link.

  Thank you

  Hi 14saba14

  MediaTek (Ralink) 802.11 b/g/n wireless network (WLAN) card

  Windows 7/8 (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66089.exe

  8.1 for Windows (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63302.exe

• LabVIEW 8.0 works with IMAQ USB? If so, should which version I install?

  Hi, guys.

  LabVIEW 8.0 works with IMAQ USB? If so, should which version I install?

  Thank you very much!

  Have you seen this.

  Years for your questions, I guess it will be better for you if you stick to a single thread.

• I can do a second partition without formatting drive c: on win98se

  Hello! I have a partition with windows 98se currently installed on it. Is there a utility diskpart for win98se? Or do I need to use a third-party software such as magical separation. I would like to make a second partition on the same physical drive without losing all my data and programs installed especially.

  The second hard drive for a clean install of windows xp, I would keep the fat32 for file system.

  Thank you

  Hello

  Download iso and burn to disc cd, GParted live cd link below, GParted works RAM need min 128 MB of ram installed.

  http://sourceforge.NET/projects/gparted/

  Back up important data and Win 98 Defrag, and then restart the computer and boot from a cd of GParted and reduce the hard disk partition and format in fat32 and then follow the info in my first post

  Slan go foill, Paul

• XP to Win 7 set at level OK. A 80 GB with 20 GB C and D Partitions 60 GB drive. Which Partition is active? Can remove Win subdir on another Partition?

  I have a Dell 745 with XP to Win 7 installed OK. The 80 GB hard drive has a partition C of 20 GB and 60 GB D partitions. The two partitions have a Windows subdirectory. If D is the active partition, can I remove the Windows subdirectory on the partitiion C? How can I find out which partition is active?

  Personally I start from scratch by booting from the cd win7 to install, early in the process when it locates the partitions, delete them both, and then continue the installation to utalise all the space

  http://winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media-128512

• Why not save a file HOST Unicode or any other format beside ANSI format? Either way, which is Unicode format?

  Why not save a file HOST Unicode or any other format beside ANSI format? Either way, which is Unicode format?

  You would normally use unicode when you want to a text file that contains those outside of the normally the ASCII value... accentuated characters and others. They are rarely used in the definition of host names.

• Hello, I need to know how to buy video editor adobe first pro? should which card I use? Live ARGENTINA and VISA rejects me. Please answer, thank you!

  Hello, I need to know how to buy video editor adobe first pro? should which card I use? Live ARGENTINA and VISA rejects me. Please answer, thank you!

  The country store & the Adobe ID, payment details must be same.

  If your Adobe ID is associated with the wrong country, please see this link:

  Change the country associated with your Adobe ID

  You can see the locations that creative cloud is available here:

  http://www.Adobe.com/content/dam/Adobe/en/products/creativecloud/CC/PDFs/CC-availability-m atrix.pdf

• How can I retrieve a Partition and its data, which has been formatted and remove, HELP

  THIS TOPIC IS CURRENTLY: [RESOLVED]

  can I recover a partition that has been formatted and deleted... I had some very important images on a new partition I created. I went to format the partition that my windows was on and I accidentally formatted and deleted the wrong partition, Please HELP

  THIS TOPIC IS CURRENTLY: [RESOLVED]

  Thank you for helping

  Well, I return it illuminates... I got it on the C drive and I got it on the disc that I formatted and deleted