Fortran and Xcode

Similar Questions

• iPhone not recognized (no device found) in iTunes and Xcode

  Data sheet:

  1. MacBook Pro (13 inch, late 2011)
  2. OS X El Capitan (Version 10.11.4)
  3. iTunes (12.3.3.17)
  4. Xcode (Version 7.1.1)
  5. iPhone 4S (iOS 9.3.1)

  Problem statement:

  1. My iPhone doesn't appear in iTunes or Xcode whenever I have it plug it into my mac directly via the usb cable. The Photos app connects and clearly shows that the list of my iPhone photos.
  2. iPhone appears in information system under the USB section.
  3. I have the latest version of iOS and OS x and Xcode and iTunes.
  4. Strange, when I connect my iPhone to a Windows computer, the iTunes in this PC recognize and display devices, and I'm able to sync.
  5. I have been dealing with this problem for almost 3 days now.
  6. Of course, I'm confident the computer to the iPhone when the alert on the computer appears.
  7. When I connect my iPhone to another Mac, it is recognized and the synchronization works.
  8. When I put my iPhone in my device iTunes recovery mode displays and is recognized and I am asked to update or restore. I've done both but my iPhone restarts in the middle of the process and gets not even recognized because it comes out of the iPhone recovery mode.
  9. Wireless mouse connected to my mac via USB works in all ports.
  10. I have USB 2.0
  11. I encounter the error "Could not connect to the device", "Could not connect to this iPhone"iPhone"and"Operation timed"out from iTunes."
  12. It seems that this problem arises with El Capital because I'm able to connect to iTunes and Xcode with Maverics last few months. Only, I returned again a coding in Xcode after a few months break and noticed the problem when I'm about to deploy my application for iPhone.

  What I've done so far but did not work:

  1. Change usb port
  2. Restarted mac, iTunes, iPhone and Xcode.
  3. Downgraded to the lower version of iTunes (12.1). I put it to the later version on light that it did not work.
  4. Use different cables
  5. iPhone in Recovery Mode
  6. Reset the SMC, PRAM, NVRAM
  7. Reset the settings of my iPhone (reset all settings)
  8. Clear/var/db/lockdown folder content
  9. sudo kextload /System/Library/Extensions/AppleUSBEthernetHost.kext and uninstall and then install the latest version of iTunes
  10. sudo launchctl stop com.apple.usbmuxd out iTunes and open it again.
  11. sudo nvram boot-args = kext-dev-mode = 1
  12. Disable the system full protection
  13. Uninstall my antivirus
  14. Created another admin account in my mac and I tried to plug in the unit.
  15. Searched the net for different solutions.
  16. installed anti malware and scanned mac.

  Hoping that someone could enlighten and lead with this problem.

  Finally solved the problem in replacement of my old usb cable with a newly purchased on Apple Store.

• How to install Qt creator for the construction of projects in the sample first Pro or AE (which are projects VS and xcode)?

  Hello world

  I would like to install a Qt creator for Premiere Pro or AE files SDK projects. So far, I have not found any related topics and I was wondering what are the major steps or tips to set up the project.

  So far, all the samples I tested work perfectly on mac or windows using VS and xcode.

  THX in advance

  Sorry, I have no experience with QT Creator; you're the first developer to seek such intervention. If all goes well, you can create a QT Creator project around the existing samples of win/mac.

• Illustrator CS4 SDK on Apple OSX 10.6 Snowleopard and Xcode 3.2 howto

  I can't compile one of the samplecode since the course illustrator CS4 SDK

  ai_cs4_sdk_mac_367 on an Apple Mac with os x 10.6 snow leopard (SL) and Xcode 3.2

  (see a few posts error at the end)

  The documentation mentions Xcode 2.4.1.

  Is it possible at all to use this SDK 367 with snowleopard and Xcode 3.2?

  If not, then how do you plugin writers update your plug-ins for illustrator to work on Snowleopard?

  THX, j.

  ----

  some of the errors I during the samplecode "Tutorial" for the compilation "10.6 | Debug | i386"are:

  ----

  .. /.. /illustratorapi/Illustrator/AIRaster.h:221: error: conflict declaration ' typedef uint32 unsigned long int'

  /Developer/SDKs/MacOSX10.6.SDK/system/library/frameworks/security.framework/headers/cssmco nfig.h:69: error: 'uint32' has a previous statement as "uint32_t typedef uint32.

  ----

  AIPlatformFileDlgOpts:AIPlatformFileDlgOpts)

  .. /.. /illustratorapi/Illustrator/AIUser.h:381: error: additional qualification ' AIPlatformFileDlgOpts:' Member 'AIPlatformFileDlgOpts. '

  -----

  / Applications/ai_cs4_sdk_mac_367/Adobe Illustrator CS4 SDK/samplecode/Tutorial/Resources/Tutorial.r:20:0 SysError 0 during the opening of "TutorialID.h".

  ----

  Also, I came across the question of uint32 with AIRaster.h.  Right or wrong, I commented the typedef in AIRaster.h and went with the standard definition of Xcode to uint32.  I thought it was OK since a 32-bit data type unsigned was what the two headers were trying to define.  I decided to go with the standard Apple set.

  Try to fix this first and see what happens when you recompile tutorial.  It compiles fine for me.

  Mark

• default page is not showing up with wiki and Xcode services on

  Hello

  I have the site, wiki and the Xcode services turned on in my set - up OS X server.

  I want to display the default page (which has links with other services) by default not pages Xcode or wiki.

  I saw there is an order of priority article, but substitution was to change the order of file I tried to change the order of the index files, but it always happens with /xcode every time if Xcode is activated and the wiki when this service is enabled.

  Is there a fix for this race 5.1.5

  

  OK here's what I did, but this isn't an ideal solution.

  CD/Library/Server/Web/Config/apache2/other

  sudo mv COM. Apple. WEBAPP. WIKI.conf COM. Apple. WEBAPP. WIKI.conf.bak

  sudo mv COM. Apple. WEBAPP. XCODE.conf COM. Apple. WEBAPP. XCODE.conf.bak

  This allows the default page to display.

  It used to be that if xocde and wiki have been activated as Xcode are also in the wiki menu.

• Error after upgrade to iOS 9, code of return and Xcode 7: 65

  Hello

  I could deploy applications on iPhone before updating to 7 Xcode and iOS9 (automatically).

  I use Jdeveloper 12.1.3.

  Now, I get the error:

  [19: 02:19] run command line: xcodebuild-window Oracle_ADFmc_Container_Template archive archivePath - /Users/user/jdeveloper/mywork/ProductList/deploy/iOS2iTunes2iPhone/Destination_Root/ProductList.xcarchive - sdk iphoneos IPHONEOS_DEPLOYMENT_TARGET = 7.0 TARGETED_DEVICE_FAMILY = 1 ADD_SETTINGS_BUNDLE = No. PRODUCT_NAME = ProductList CODE_SIGN_IDENTITY = iPhone Developer: name V (12345XYZ)

  [19: 02:41] orders for next generation failed:

  [19: 02:41] command-line execution failed (return code: 65)

  [19: 02:41] undeployment.

  [19: 02:41] - incomplete deployment.

  [19: 02:41] could not build the iOS application pack.

  [19: 02:41] deployment failed due to one or more errors returned by 'xcodebuild.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 65)

  Orders for next generation failed:

  Ld /Users/user/Library/Developer/Xcode/DerivedData/Oracle_ADFmc_Container_Template-gwxjznarmoyczadsnbxmvfmebqni/ArchiveIntermediates/Oracle_ADFmc_Container_Template/IntermediateBuildFilesPath/Oracle_ADFmc_Container_Template.build/Release-iphoneos/Oracle_ADFmc_Container_Template.build/Objects-normal/armv7/ProductList normal armv7

  (1 failure)

  And in fact the ProductList file is missing in this way!

  What could be the reason?

  Someone at - it experience with deploying applications after upgrading to Xcode 7?

  Thanks for your help!

  Klemens

  Hello.

  XCode 7 don't is not supported with MAF for now. Our goal is to support in our next major release.

  Just rename your current installation of XCode to something else (XCode 7 would be nice), then download and install XCode Developer Center 6 Apple. You MAF should run without any problem on iOS 9 anyway.

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• Pages BSD system calls and functions in the C library is missing

  Commands like socket man 2 or 3 man printf say there is no such page manual. How do we install the corresponding manual pages?

  I'm on Mac OS Sierra and XCode 8.0 is installed.

  I use zsh if the shell is important somehow.

  You need your environment variable MANPATH set to.: / usr/share/man: in zsh, if it is not. I have 8 of Xcode and the command line tools installed and no problems with the man pages, including those that you mentioned. I use Bash, zsh not.

  You can optionally extend the MANPATH search by adding/usr/local/share/man order: and let you check out these pages added to this place by non-Apple software.

• Xcode is based, but does not work

  Hi people,

  I have a problem with Xcode

  When I try to launch a project, it generates correctly and then just says "running < name >: < name >»

  Some time previously, I have worked on some projects of iOS and at the time, everything worked fine.

  Not even that, they run more.

  I don't know why it stopped working in the simulator of the app is just a white screen.

  Mac OS projects with cocoa does not even launch the built application. Console applications do not work or the other.

  I had this behavior with XCode 7, then tried the beta version 8, which also had the problem.

  This morning, I decided to uninstall XCode and reinstalled version 8 of XCode from the App Store.

  The problem persists there.

  IM under OSX 10.11.6 and Xcode Version 8.0 (8A218a).

  Please help me, I'm getting desperate. I can't develop this way.

  Best regards

  Alex

  I would check to see if there is a modal dialog box, asking you to authenticate before running your application:

  

  If you don't authenticate you request probably will not work

• Failed to start service to Xcode because of the license agreement

  Since the upgrade to 5.0.15 server, I have met some problems trying to start the service of Xcode, which prevents good start:

  When I tried to select Xcode by clicking Choose Xcode in the server window, after I chose/Applications/Xcode, I saw the message 'preparation to set the server to Xcode' and Xcode was launched. Xcode then displays a message indicating "Xcode requires permission to use accessibility for the user interface controls. "Click on request access to open system preferences add Xcode to the list of allowed applications to control your computer." When I click on Request Access, nothing significant happened. I opened System Preferences > accessibility manually, but did not know where to add to the list of Xcode. I didn't see any list under Interacting > keyboard, mouse and Trackpad, or switch control. None of the other sections seems to contain a list of applications either. After some digging around, I noticed that there is an entry in System Preferences > Security & privacy > privacy for Xcode for assistance that has been disabled. Check the box seems to have accomplished the goal here (fingers crossed).

  Server, and then displays the message "you must accept the terms of the licenseXcode. Restart Xcode and accept the software license agreement or choose another version of Xcode'.» When I launched Xcode, however, he showed not the license agreement. Delivering the xcodebuild-license sudo and sudo xcodebuild-license accepts commands in a terminal window do not appear to do this in the right way, because the server continues to display this message every time I chose the Xcode application.

  There must be some reason Xcode does not display the license agreement when I run the application, any server insists I did not accept the agreement despite having accepted several times.

  Any ideas?

  Potentially a bug known, according to the affected versions.   (Look for the license in the Xcode release notes).

  If the approach in the release notes does not work and If this existing thread does not work...

  .. then see if the brute force approach works...

  Turn off of Xcode,.app services.    Xcode remove the system.  Reset.  Reinstall Xcode, a new download (current) or a (current) version stored on another local system, launch Xcode, accept the license.  Then configure Server.app and see if he's happy now.

• Xcode opens with 'ICloudSetupView.strings' at startup after a full stop. Xcode is disabled as a startup item, but there is a new startup item called "ICloudSetupView.strings" that has a "sort" of "Strings File". Is this a virus or spyware?

  MacBook Pro	(15-inch, mid 2010)
  OPERATING SYSTEM	OS X El Capitan (Version 10.11.2)
  Processor	Intel Core i7 2.66 GHz
  Memory	8 GB 1067 MHz DDR3
  Startup disk	Macintosh HD
  Graphics	Intel HD Graphics 288 MB

  The past several times I completely stopped my MacBook Pro and booted back up Xcode is the first thing to open, and it opens a window, I've never seen before called 'ICloudSetupView.strings '.

  I went to check if Xcode is checked as a startup item (I usually put off because I do not often use XCode) and Xcode is not even on my list of items that opens automatically when I boot.

  HOWEVER, there is a new startup item called "ICloudSetupView.strings" that has a "sort" of "Strings File".

  I traced the file in its location and found several others with the timestamp date same creation and now I'm worried.

  The path to the file is:

  System/Library/PrivateFrameworks/FinderKit.Framework/versions/A/Resources/SK. LP roj/ICloudSetupView.strings

  
  

  The file has only the following 2 lines of code (technically 1 with overflow) that you can see in the image:

  bplist00 "_uHD " Driveo-7F-8GX.title_H4f-Te-Tzu.title\iCloud

  3 @

  
  

  A screenshot of the Xcode file that opens and my preferences of start programme is attached.

  I'm quite worried about it, especially because it IS NOT defined as part of open automatically but it is.

  I searched online and found no something like this.

  Anyone know what it is?

  Or what the code does?

  Is this a virus or spyware?

  

  It is not spyware. Simply remove it from your login items.

• INTEL FORTRAN COMPILE / VISUAL STUDIO FOR THE ASPEN SIMULATION

  Hi all

  I have little knowledge about the use of FORTRAN with application of this on VISUAL STUDIO. In fact, I know about these software because of the obligation for them to rewrite some code I had to rewrite before running on ASPEN Plus.

  My problem is, I want to run a simulation Aspen Plus using the soft articles in question, but I honestly don't know how to go for them, as all this seems confusing. I have already installed the compiler FORTRAN and Visual Studio, but I don't know which platform to extract the entry codes I need to compile.

  The codes that I needed to re - compile in Intel FORTRAN, which is compatible with the Aspen has been compiled previously using Silver frost 95.But FORTRAN, after compilation by using this software in Silver frost, codes does not work on Plus.It of Aspen was a few days ago I learned this can never work on ASPEN Plus Hence the need to install the compatible software.

  (1) what it means to re - write a written code previously in Silver frost FORTRAN 95 or other FORTRAN codes in Intel FORTRAN compiler code and what is the procedure for that?
  (2) after having rewritten in Intel FORTRAN codes codes using Intel FORTRAN compile, how I performs the following steps before finally launching the simulations using Aspen:
  b compile the user model?
  (b) models of the user shared a link in a Fortran Library procedure?
  (c) provide the files objects or shared for the Aspen Plus system libraries?

  Any positive contribution will be highly appreciated.
  Gee right.

  Hi, Ghislain law

  Your message is addressed in the discussions on these Microsoft Community forums. It is better suited for the MSDN Developer audience. Please click on the following link and post your question in the appropriate forum.

  MSDN forums: Index

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Concerning

• 6 Xcode is supported by the SDK of EI?

  6 Xcode is supported by the SDK of EI? Otherwise, what is the latest version of Xcode that will work with the SDK?

  Recently, I upgraded to Mavericks and Xcode 6.  So far, all my files to current project build very well.  Let me know if you encounter any problems.  Mind you, I did not update project CC SDK for the "recommended settings" files that Xcode suggests, so I don't know if that will affect something. I was using before Lion and Xcode 4.

  -Andy

• Immediate assistance of DPS/Xcode Freelance

  I'm looking for someone who can help finish my DPS application and get it available for my client to submit to the app store. Obviously this person must be competent in DPS and Xcode, must be available to work on this today or tomorrow. I need files ready for my client 4 P.M. tomorrow. Will probably only take an hour or two. PM me for more information. THX!

  Tony

  Locking of the discussion, please PM the person directly

• Problem compiling with Xcode plugin sample

  Hi all

  I'm having a problem of compiling a sample plugin in the SDK ("BasicPlugin") using Xcode on Mac OS. Xcode build error is "name"CursHandle"unknown type". The error occurs in two source files: AVExpT.h and SafeResources.h. I can't find any header provided with the Acrobat SDK kit that defines the type of CursHandle.

  I'm on Mac OS 10.8.4 and Xcode 4.6.3.

  The SDK documentation says that the SDK is only compatible with Xcode 2.x; elsewhere in the documentation it says that it was compatible with Xcode 3.2 and 3.3. What is the reason for the above error? It is not possible for me to install the old version of Xcode, because I'm running 10.8 OX, and older versions are not compatible.

  I would be very grateful for any help.

  Paul

  Yes, the software SDK still uses characteristic of carbon (even if Acrobat itself does not use anything carbon).   Therefore, you need an older version of Xcode that talks about carbon.

  Consider using a virtual machine from a certain flavor to run an earlier version of Mac OS and Xcode.

• How many times should I stop my MacBook Air

  I have a MacBook Air (early 2014), with a processor i5 and 4 GB of RAM. It will be 2 years from November 2016. Summer's going hard for me for a while now and works very well without any problems. I use applications like Final Cut, Motion 5 and Xcode and I am satisfied with the performance of such a light machine.

  Apart from the information on my Mac, I have a question about proper use to optimize the performance and life of it. How many times have I stopped him? I use my Mac a day should I allow to sleep when I do not use as it has little effect on the battery and allows me to pick up where I left off. Should I only stopped when loading or is it okay to sleep by loading too? Should I stopped him every month or so or just during the software updates as I prefer to leave is majority of sleep of the time it won't have a long amount of time without me using it.

  Thank you.

  If you do not meet the pigs of RAM, there is really no reason to close it. If you don't see the warnings of memory, a simple reboot menu Apple fade issue.