Show/hide the buttons on the tabular form region

Similar Questions

• Show/hide the buttons of different page

  Hi all

  I was responsible for creating an interactive PDF of several page which is basically a questionnaire. Each page will have one question with the results of all issues gathered in a table at the end. Ideally, I would like to answer each question to send to a cell in a table but I can't find a way to get there, so my solution was to use radio buttons to select the buttons for results and responses. I had planned to assign an action show/hide radio buttons to reveal the answer on another page. During testing I ran into a problem when you configure the action show/hide, it allows me to select a show/hide button, unless its on the same page as the option button! Does anyone know if there is a solution to this? If someone can not advice me how I build such a feature?

  Thanks in advance,

  JS

  In Indesign, you will need to install the buttons in response to the same page as the radio buttons for the construction of all hide / display the activations. It's the only way you will be able to set these properties. Once you have completed and tested, you can now move the buttons in response to another page. Option buttons to activate hide/show buttons to answer to a different page. I have a test file that shows, if you want, I can send it to you.

• Show / hide the DropDownList selection Pages

  I'm trying to show / hide the last page of an audit report according to which city is selected in the drop-down list.

  The code I use is:

  If

  ('4' == xfa.event.newText)

  {

  Page7.presence

  = 'visible ';

  }

  Page 7 has the value "hidden" as I will only show / selected print if some cities are (Bundaberg being one of them)

  The drop-down list has been fixed values then '4' = Bundaberg.   The script is on a change event.

  Can anyone help please this code does not work.

  Thank you.

  Jenny

  Ensure that the form is saved as "dynamic".

  N.

• Where the control to show/hide the removable storage settings

  I try to install Win 8 Prof.  I have a HP desktop with a CD player and 4 slots for removable media devices.

  In a previous installation, there was a way to show/hide the removable drives / slots unless there was inserted media.

  I don't know where the setting.  I tried the

  strategies group without result.

  I also lost the capacity of my office to recognize and attach my CD player.  It appears in Device Manager, but he said he is not physically attached.

  I can boot from the drive.

  Help, please.

  Have you installed Windows 8 or you try to install it?

  I use Windows 7 on my PC and in that, the option "Hide or show empty leads in computer folder" is located in the view tab of the window "Options records". It should be the same in Windows 8 as well.

  Visit this link:

  http://www.SevenForums.com/tutorials/6969-drives-hide-show-empty-drives-computer-folder.html

  If Windows 8 will not detect the device, try the steps in this link:

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

• Hotkeys to show/hide the tool Options and the Photo to PSE11 tray

  LOL - I just find it has shortened F4 to show/hide the xD Tool Options
  Overall I have disabled "Auto Show Tool Options" option and use F4... Thanks Adobe you have not left it without no solution!

  Title of the message was edited by: Brett N

  And have you tried F5? You will soon use the F4 and F5 to clear your display

• [AS] IDCS4 show, hide the contours of the block

  Hello

  Could someone please tell me the use of applescript, how do I show or hide the framework edeges in IDCS4 please, that normally found

  under show-hide the contours of the block.

  see you soon

  KeV

  Change the line to:

  define See the frame of view preferences false edges

  --

  Shane Stanley [email protected]>

  AppleScript Pro, April 2010, Florida http://www.applescriptpro.com>

• can radio buttons show/hide the info in an interactive pdf?

  Hello. I have a question to which I have been faced with during some time... hoping someone can help.

  I create a document in InDesign CS6. It's basically a guide with a joint questionnaire.

  I have forward and back buttons work properly - so that they take you from one page to another.

  However, the more difficult question is I want to have interactivity with the use of radio buttons and eventually the check boxes. Thus, for example, on page 1, I have a question multiple choice where there are three choices. Clicking the wrong answer shows a block of text saying 'no it's wrong' and clicking on the appropriate radio button shows the words "Yes, correct."

  I have created three blocks of text and make it into a multi-state object.

  Three problems:

  1. option buttons seem to be the option for "the State" in the buttons and Forms dialog box
  2. even if that were the case - the State Road seems to be only swf, non-interactive pdf form - is there a way to change this?
  3. script assuming that there IS a way, everything can be put in place so that instead of using radio buttons I have use of check boxes that only give the correct answer if the correct check boxes are selected.

  I would stick to indesign to do this, however, I think that the option is perhaps more suited for this problem?

  Many thanks in advance,

  SunsV

  1 - make 3 images and convert it into boxes option...

  Text blocks 2 2-make (Yes, his right) (No, the wrong) and convert it to buttons - rename it (Righ, evil)

  3 - Click on each radio button and apply action: Show/Hide button and form and on the visibility to activate the globe eye for buttons wrong or right.

  

• show/hide the button with the icon enabled when the condition is met

  Hello
  
  I created a B button with an icon of a sign of the green check mark.
  It must appear next to another A button when a condition is met.
  
  How can I better get this working B key, without using something else than the APEX.
  
  The condition is that some data has been inserted by clicking A button or simply exist in the database table.
  
  I tried conditional display of point with conditiontype "PL/SQL Expression.
  but could not make it work.
  
  TNX to tide me over.
  
  Cara

  Hello

  If you use the condition EXISTS (SQL query returns at least one row)?

  This could give idea how
  http://Apex-SMB.blogspot.com/2009/05/How-to-determine-if-user-can-view-apex.html

  BR, Jari

  Published by: jarola 18 November 2009 16:07

  Oh,.
  I paste the wrong link and can not find more good.
  Well anyway in this link is also example to condition EXISTS

  To meet this requirement I can add a condition (SQL Exists) to the Report 2 region on Page 2:
  

  It takes something similar and your table selection

• show / hide the shape of the body

  I create a form with a report. The form includes the model hide_show_region. So, with + sign, show or hide the body of the form. The default value for the form's hide.
  
  When users press the edit button of a record on the report in the body of form is still hidden. When presseing the sign on the form, the text of the record is the correct display +.
  
  I want to understand the following:
  
  -what the button edit, after the page has recharge the body shape should be see the.
  - But default to the shape of the body must be hidden, so only when you press on the + sign on the form or the button Edit in the report of the Board of the shape to see the.
  
  interactive report mode, I add the following by the link change link attributes: onclick = "htmldb_ToggleWithImage('#invoer#Body')" where 'invoer' is the static name of the form. "
  
  But nothing happened. I tried with a show_hide_region of the service and the total form is hidden. But when recharging is in competition shape is show. So the also correct onclick is not thinking...
  
  
  Hope I clear my problem and some can help me with this... tnx in advance!

  Hello

  OK - it was a typo on my part:

  htp.prn('htmldb_ToggleWithSave(''INVOER_ICON'',''INVOER_BODY'');' || CHR(10));
  

  It should be:

  htp.prn('htmldb_ToggleWithImage(''INVOER_ICON'',''INVOER_BODY'');' || CHR(10));
  

  So, I updated the SQL package for this

  Andy

• problem with checkbox on the tabular form

  (All my friends at the time of deperate) Hi,
  
  I have a tabular form on a page, which I use for adding record only. So it always shows me a blank line, which is ready to be inserted after the user has filled in the data and click on the "submit" button.
  
  Now, I have a field check box on this form of table. Since all the columns that I show as null, I also shows this check box cleared when page appears. This is the query for the region of origin of this form:
  
  SELECT "Customer", null
  NULL "currency."
  HTMLDB_ITEM. CheckBox(40,'YES',null) critical_box,
  OF the double
  
  I used the 'YES' as return value of this checkbox (when the user checked, otherwise I guess that's not equal to 'YES').
  
  I have my own update process, which gets triggered when clicking on 'submit '.
  It's my insert clause in this update process:
  INSERT INTO table1
  (customer, currency, critical_level)
  values
  (APEX_APPLICATION.g_f01 (i), APEX_APPLICATION.g_f02 (i), decode (APEX_APPLICATION.g_f40 (i), 'YES', 'YES', 'NO')
  
  
  Now the problem is that when I click on checkbox and save it, it adds record correctly. But when I click on check box when you insert, I get error message no data available. It must insert 'NO' for the 3rd column when the check box is not clicked.
  
  Please help here. Not sure why its not giving no data found error when unchecked the checkbox on the form of tables.
  
  Thank you and best regards,
  Rave.

  Sorry, this one is out of date, try this

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:219

  Here are a few related threads you might be interested.

  Re: Boxes to check off and go to the other fields in the table
  Re: Problem in selecting the checkbox values
  Tabular presentation - box

• Show/hide the elements if the rule is set to true on one of the many elements

  I'm sure I'm missing something really obvious but I've tried a few things and I can't get this to work...

  I need to show the element X if none of the elements A, B or C = 'Y '. Similarly, I want hide the element X if all a, B and C = 'n'.

  I tried to create a single action with A, B and C contained in the 'when' list of items and I tried also create separate stocks for A B and C, but both methods result in X being shown/hidden based on the last element that was changed, do not take into account the other fields.

  For example, if A and B are both equals Y, then I B = N, X is hidden. It must always be displayed as a still is equal to Y.

  What is the correct way to do it? Thank you.

  Hello

  create 1 dynamic action "to change" of P1_A, P1_B, P1_C

  Then set the status of the dynamic measurement JavaScript and enter the javascript, something like (assuming that the fields of the form are P1_A, P1_B, P1_C):

  $v ('P1_A') == 'Y ' |

  $v ('P1_B') == 'Y ' |

  $v ('P1_C') == 'Y '.

  And then set the true action to display the P1_X field

  Concerning

  Bottom

• Show/hide the problem and playing of the symbols

  Hello.

  I have a problem with the instructions Show/Hide and play - my problem here:

  I have 4 buttons (symbols) in the stadium: "sectionOption1a_Btn", "sectionOption1b_Btn", "sectionOption1c_Btn" and "sectionOption1d_Btn".

  I also, what I call, 4 'options': 'Option1a', 'Option1b', 'Option1c', 'Option1d'.

  Each of these symbols of 'Options1X' have a 'melted' and 'melted' animation - 0 ms and ms 2000, respectively (within them).

  Each button runs each own option:

  "" 'sectionOption1a_Btn' ' CLICK ' symbol 'Option1a' tracks

  "" 'sectionOption1b_Btn' ' CLICK ' symbol 'Option1b' tracks

  "" 'sectionOption1c_Btn' ' CLICK ' symbol 'Option1c' tracks

  "" 'sectionOption1d_Btn' ' CLICK ' symbol 'Option1d' tracks

  All "Options1X" are hidden, except one that is active.

  The problem:

  Let's say I have "Option1c" active and I want to go to the "Option1a". So, I click on "sectionOption1a_Btn". When I do this, I want the "Option1c" to run is "bland out' (inside himself, to 2000 ms) and then run " Option1a" 0 ms - it is own"fade"while keeping all the other "Options1X" hidden, of course."»
  

  I hope that I didn t more complicated my explanation.

  Here´s a schema:

  

  Thanx.

  Hi there, you can implement such a feature in 2 tracking variables. YER essentially saying 'currentOption' to unfold on click of a button and the definition of the "requestOption" according to the click button. At the end of the coast anim current outro, yer by calling the 'playRequest' function to play the requested side.

  Put this question to the stage.compositionReady event:

  var currentOption = null; / / a, b, c and d

  var requestOption;

  called by the event of timeline.complete at the end of each Option

  sym.playRequest = function() {}

  sym.getSymbol("Option1"+requestOption).play ("is");

  currentOption = requestOption;

  }

  called when the button is clicked

  sym.btnClick = function (request) {}

  requestOption = request;

  {if (currentOption)}

  sym.getSymbol("Option1"+currentOption).play ("fadeOut");

  } else {}

  sym.playRequest ();

  }

  }

  Put this on a button click:

  sym.getComposition () .getStage () .btnClick ("a"); / / or b, c and d for each button

  Put this question to the event timeline.complete of each Option symbol:

  sym.getComposition () .getStage () .playRequest ();

• show/hide the object with the text box

  Hello world

  has obtained a display code and masking of an object with a button and it does not work well. This is the code

  function show_hide_image1(evt:MouseEvent):void {}

  Image1.visible =! Image1.visible;

  }

  Enterbtn.addEventListener (MouseEvent.CLICK, show_hide_image1);

  Now, got another code with a box of password who send me on different Label based on what is in it. There is the code.

  Enter.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);

  function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void

  {

  If (Passwordbox.text == "cryocath") {}

  gotoAndStop ("cryocath");

  } Else if (Passwordbox.text == "54321") {}

  gotoAndStop ("A54321");

  } Else if (Passwordbox.text == "123456789") {}

  gotoAndStop ("A123456789");

  } else {}

  Stop ('error')

  }

  }

  Now, my question is, I want to introduce my hide/show code this code but do not understand how to do it. What I want is that if I enter my Passwordbox, my "image1" show/hide object "image1". If I get "image2", my "image2" show/hide object. Can someone help me with this? TNX

  :

  Enter.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);

  function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void

  {

  {if (this [PasswordBox.Text])}

  This [PasswordBox.Text] .visible =! this [PasswordBox.Text] .visible;

  }

  If (Passwordbox.text == "cryocath") {}

  gotoAndStop ("cryocath");

  } Else if (Passwordbox.text == "54321") {}

  gotoAndStop ("A54321");

  } Else if (Passwordbox.text == "123456789") {}

  gotoAndStop ("A123456789");

  } else {}

  Stop ('error')

  }

  }

• Show/hide the image with audio (audio does not if necessary)

  Then, I ran some tests to see what was going on so I could better explain my problem.

  I have a slide with a picture that has four clickable areas. First of all, the student listen tell me for a few seconds and then is invited to click on the image areas that are highlighted.

  When the user clicks on one of the fields, an image appears and I taped audio on this 'object '. Note: I didn't use the slidelets substitution as the clickable area is hidden by the new image when the image appears on a click. The user will press a close button that is on the image, set with another clickable button to hide the image then select another pop up box. (See image below... you can see the image of forklift under the transparent image gray... This is where the user clicks the highlighted area).

  

  I tried two ways:

  having the image plays on the whole timeline from beginning to end of blade (be hidden with the show/hide button function)... when I do it, the sound will not play at all (I'm guessing that this is because the audio went silently on the first few seconds of being on the screen, so by the time the student clicked the button finished audio).

  and

  Drag the beginning of the image to close the timeline when the user is asked to click on areas of the screen... when I do that, the sound play a bit, but gets cut off after a few seconds.

  If I click on the areas as soon as the blade begins to play (since i KNOW where the buttons will be activated), the audio plays very well which makes me believe my theory that the audio runs just at the moment where the user gets to click on it.

  There is no break on one of the buttons around this period, so I know this isn't that.

  What I am doing wrong?

  Thank you! :-)

  I'm happy to say after hours of frustration, I finally got to work.

  I went and read your blog Lieve on micro navigation and managed to keep the images at the point of the slide where the user is asked to click on them and define the action of tip:

  to display the image,

  hide the other images and

  Use the assign with 705 rdcmdgotoframe

  and added a line to continue so it wouldn't break (if I do this, it seemed only allows only not the last his image clicked / or show the function works because I have an action secondard on the second tab to display the button 'next' once all are clicked).

  I had to do the math, but thanks to your info on your blog, I was able to understand this. I just tested it and it works... so I'm not going to save and close and breathe until Monday when I can run my final tests on the entire project!

  Thank you!!

  ~ Gina

• Ability to show/hide the sections in a table?

  Hi all

  First post here. I only started using LiveCycle Designer a few weeks before, never knowing that it came with my Acrobat. I've been busy converting the forms that we use in our business in versions of pdf that can be filled and some with simple script created etc.  In any case my most ambitious effort to date is to create a calculator in gross salary mass in which I would enter in the total of hours worked for each employee and gross payroll is calculated. Calculations. that I have no problem.

  I use a hidden subform 'config' (thanks to kingphysh for your simple and easy example!) to store the names of the employees and payrates and the Department in which they work.

  My main form, one on which I am in time total for each employee, consists of a table with a section for each Department. So I can put all employees in a Department in a section of the table and then easily make subtotals by Department etc.

  Table1:

  Table1.section1

  Name of min. | The name of the EMP. | Pay rates | Total hours | Gross remuneration.  <-this would be a line in the section

  Table1.Section2

  Name of min. | The name of the EMP. | Pay rates | Total hours | Gross remuneration.

  Table1.Section3
  Name of min. | The name of the EMP. | Pay rates | Total hours | Gross remuneration.

  and so on. Each section also has a line of footer for subtotals.

  This form will be used at various physical locations and not every location will have all departments. So, I want the table to show that the sections for which the corresponding departments exist based on a selection (check box) that is located on the hidden config page.

  Its not so much the actual script is a problem, but where to put the script. Should I use an event from Table1 or the box? I've tried both but none work as you wish. Or should I use an event to the lines in the article itself?

  Pointers and suggestions will be greatly appreciated!

  Harry.

  Hi Harry,.

  Yes, using a series of check boxes (one for each table) will work.

  Here's a sample: https://acrobat.com/#d=MnqBQrsWVc5gKwQFC9TyZA

  It uses radio buttons to change the presence. The same principle applies to the boxes (by default = 1, selected, unselected = 0)

  Therefore, you can test the value of the box in the click event and using an if statement to make the presence of the associated table visible/hidden.

  Hope that helps,

  Niall