Where the control to show/hide the removable storage settings

Similar Questions

• What is normal for the backup of XP SP3 and the startup type of the removable storage service?

  I was getting ready to plan and attempt a clean full backup for tonight.  I have the backups created on several entities, currently backup but have a very stable system at the moment and wanted to try to make a clean backup file.  That day has finally arrived after been forced a corrupted system files hard drive failure "repair" critical and forced me to go back to SP1a (my Windows Genuine valid CD which I highly appreciate) in order to obtain any boot system, including safe mode and console mode.  Repair has presented many incompatibilities at the level of program and system, including the basic WMI and COM of the corruption system.  Three months later... it of time to update my backups and recovery procedures and hope that this does not happen!

  In preparation, I decided to refresh my memory on the use of the backup and by browsing the Help and Support Service Center files.  One of the first things I noticed was "storage removable service must be started for the backup works correctly."  Audit and inspection of my existing Services using computer (Local) management, I have observed that after a normal windows startup, the removable storage service is not started with manual startup type.  I use a USB drive connected as my backup media, and it is fully operational as a normally formatted NTFS data disk volume.  I have windows indexing disabled on this volume.  Is the type of service required removable storage of normal manual started?  The backup program will automatically start this service?  I know I've never manually started it myself and backups seem to work well.  Should we change the startup type to automatic?

  -Thanks, Jerry

  I would like to leave as a textbook.

  The Service will start (if capable) as soon as ntbackup.exe begins.

  If you want to see, with your Services window related to the function of RS place and it will not work and the manual.

  Click Start, run and enter in the box:

  Ntbackup.exe

  Click OK to start the backup and the Restore Wizard.

  Go back to your Services window and press F5 to refresh and SR Service should now work.

  When you exit the backup and the Restore Wizard, the RS Service stops (it may take a few minutes), and you may need to close the Services applet and reopen it to notice she's moved to manual and not running.

  You will see things like present to the event system log viewer:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  The removable storage service entered the running state.

  (this is when you go out the backup and the Restore Wizard and wait a few minutes... then the Service stops itself...)

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Description:
  The removable storage service entered the stopped state.

  It's like aid and assistance...  Most of the people (including the technical support engineers who are hired by Microsoft) say to set the Startup Type to automatic, but you don't have to...  Set it to manual and it will start fine when he needs start (if he can).

  There is no need for these Services (and many other Services in XP) as starting at each restart and run all day without doing anything.

  Here is a good list that will help you understand your XP Services:

  http://www.blackviper.com/2008/05/19/black-vipers-Windows-XP-x86-32-bit-Service-Pack-3-service-configurations/

• What is the removable storage management?

  I just checked the "turn windows features on or off" and I noticed that the "removable storage management" is turned OFF. I used a hard drive portable USB and flash drives since I have this computer without problem.

  What does the "removable storage management"? I can't find something more descriptive than the presentation text short I get when you hold the mouse pointer.
  This is the most I can find:
  http://www.blackviper.com/wiki/Removable_Storage

  If my portable USB drive, my USB key and my DVD +/-RW do not count as removable storage requiring this feature, what?  I use all these devices at least once a week without a problem.

  Besides, someone you will suggest a guide to access descriptions of best of all find under "turn Windows features On or Off? Some are self-explanatory such as TFTP, Telnet and games, but others I'm not sure as RIP. Why would I need RIP on the home (client) version of Windows and why only RIP version 1 that does not support CIDR.

  http://msdn.Microsoft.com/en-us/library/bb540725 (vs.85) .aspx

  You use the wrong search engine. I found enough things for the reading of the week of research management removable storage on Bing.

• Windows Vista does not recognize the removable storage device

  ISSUE INITIAL 2010-03-03)
  Here's the scenario:
  1. Insert the card compact flash.
  2 computer recognizes the removable storage (that is, it is assigned a drive letter and appears in disk management).
  3. use the icon remove the device safely in the taskbar to stop the machine to remove safely.
  4. remove the card compact flash.
  5. Insert the compact flash card.
  6. the computer does not recognize removable storage (that is, it is not assigned a drive letter and does not appear in disk management).

  The only way I can get windows to recognize the drive is to restart my computer. How can I get windows recognize the drive without having to reboot?   This problem does not occur with USB flash drives.

  Windows Vista Hame Premium, 64-bit, Service Pack 2 operating system

  UPDATE (04/03/2010):
  I have more information, I hope this helps to reach a solution.

  -J' repeated the steps above 1 to 3, with open Device Manager.  In step 3, in the Device Manager window, the icon for the question USB mass storage device becomes the exclamation point in yellow triangle icon.  Check its properties on the tab "General", in the "Device status" box, it says: "Windows cannot use this hardware device because it has been established for"safe removal", but it has not been removed from the computer. (Code 47)  IX this problem, disconnect the device from your computer and then reconnect it.  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
  -J' then removed the card and rest of the error state.
  -J' I re inserted the card, and rest of the error state.
  -J' I then tried to update the driver by accessing the tab "driver", click on "Update driver", click on "Automatically search for an updated driver", and the result was "the best driver for your device is already installed."

  I found the solution on this hp web page:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07910&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3876397&lang=en#N1074

  Basically, it says NOT to use the function "remove the device safely.  Instead, just right-click on the drive in the Solution Explorer, then choose "Eject".  Works perfectly.

  Some excerpts...
  "Memory card readers are devices that use the icon remove the device safely in the notification area in the taskbar). Do not click stop in the window, remove the device safely. Doing so can disconnect the card memory reader for Windows. In this case, restart the computer to reset the memory card reader. »
  "An alternative to the restart of the computer is to use the option optimize for fast moving functionality in Windows.

• where the touch pad settings

  I can't find where the settigs are for my touch pad am runn [vista ng

  I can't find where the settigs are for my touch pad am runn [vista ng

  The location of the touchpad settings varies from one computer to another brand.

  I used to have a Dell with Vista, (I'm on Acer Win 7 now), and the steps to change the settings for the touchpad did not apply to other brands.

  Basically, you'll...

  Start > Control Panel > Classic view > mouse > from there, you need to look for the settings of the device. If you find it, you will find the touchpad settings.

  Sorry, I can only offer this small.

• historical files won't accept the removable storage like SD card

  Hello

  not until I got my Tablet Surface Pro, I discovered that I am not able to ADD a SD memory card to the library, then having these backup files upwards through the history of the files.

  Historical files only accepts items (drives/folders) that are included in the library, correct?

  SD cards and other (disks) removable storage cannot be included in a library, correct?

  It could have been no problem in the past, but with computers as a shelf where you add storage capacity by inserting an SD card, it would be wise to look at it as a real player and allow removable storage appear in the library, right? I mean the USB portable drives are not really different and they can be added to a library.

  Does anyone know a 'trick' to be a part of removable storage library?

  Thank you

  Frank

  I managed to get the history file to my SD card backup in any first format in NTFS then authenticated users permissions.

  Click right on NTFS formatted the SD card and select Properties then the tab Security , under group or user name , click the button Edit then Add , and enter the user authenticated followed check names, OK etc.

  Then create a folder, such as SD-Documents and then right-click on that folder and select include in library > Documents or library what ever you want added to folder.

  Works on my device Windows RT as well as my PC 13 of Yoga.

• Problem with the Removable Storage Service and Microsoft Fix it 50198

  I updated Windows XP computers in an office from Internet Explorer 7 to Internet Explorer 8.  During the process, the installation gave me security errors.  I resolved to fix these errors by running Microsoft 50198 recommended in troubleshooting Internet Explorer 8.

  The facility has been able to complete, but there is a new problem.  All computers that require this hotfix are now unable to use and USB storage media.  The following error is generated in the event log:

  Event type: error
  Event source: Removable Storage Service
  Event category: no
  Event ID: 111
  Date: 15/03/2011
  Time: 12:48:09
  User: n/a
  Computer: WCML-HNCX5J1
  Description:
  RSM could not load media in drive drive 0 of library SK_USB20 drive Flash USB Device.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 01 00 00 00...

  I am logged in as an administrator and have tried several different USB media with the same results.  I am posting this in the security group as it seems to be linked to security changes made by Microsoft difficulty he 50198.  Other computers that do not need this fix do not have the same problem.

  Thank you for your response.

  I'm working on it, I think I found my problem.  These computers are part of an area in which I do not.  They will be removed from the field in a few weeks as they are separate from this company.  The area has some group policy settings that limit to me logged on as a local administrator.  I think I'll have to wait until computers were removed from the field to solve this problem.

• SanDisk Cruzer power 32 GB USB recognized as a hard drive instead of the removable storage driver.

  Hi, my sandisk Cruzer power 32 GB USB key is recognized as hard disk, which appears in the section hard drives instead of the section of removable storage. I would like to know how to solve this problem. I want to create bootable USB driver.pls. ~

  I use the 32-bit Windows 7.

  There is no solution, it is what it is.  However we should not prevent you to make bootable.  Search here and on Google for RMPrepUSB.  It is a utility that can make the bootable disc.

• Download images via the digital camera. the message on removable disk E saying its now safe to remove the mass storage device

  Cannot download pictures from my digital camera.  I've been able to do recently.  Happened several times, I tried the computer shows small icon at the bottom right it is now safe to remove the removable storage device E.  I recently changed my virus protection providers.  This could be the problem or is it a problem with my computer?

  Hi FrankieLastname,

  Check that the automatic run settings are correct:

  1. Click on the Start orb
  2. Select Control Panel
  3. Select auto play

  You should see the card reader that you use for the Sandisk under devices. Select the action you want to take in the drop-down list.

• How to restore the devices with removable storage "missing icons

  HelloW sir This is krivy! for some time more I'm months local disk G not displaying don't not its icon (devices with removable storage) totally absent I m so depressed about this because I m unable to put my pen-drive & usb Cables & having so much work to the system that has information in the key USB sir could you tell me a solution for this problem

  Hi krivy,.
   
  Method 1: Check if the drive is visible in disk management.
   
  a. right click on my computer > Manage > Disk Management > right click on the removable storage drive and select Change drive letter > select a new drive letter not already in use.
   
  See if that helps.
   

  Method 2: Run the troubleshooter from the link given below and if that helps.

  Hardware devices not detected or does not

• Has anyone seen this error of conditional text: show/hide is incompatible?

  When I generate my book file, I get the following error in the log:

  Show/hide hidden is incompatible.

  Does anyone have any suggestions on how to troubleshoot and resolve this problem?

  Thank you

  Janie Gulley

  FrameMaker assumes that when you export a book, you would like conditional text to shown the same way across all documents in the book. It warns you if it is not so.

  "Show/hide hidden is incompatible" means that the hidden state is not configured the same throughout your book. For example, it can be displayed in some documents but hidden in others, or an indicator of Condition red in some texts, but blue in others.

  To resolve this problem:

  1. Select a document in your book where the conditional text settings are correct and open.
  2. Click on the book and type Ctrl + A to select all the documents in it.
  3. Choose file > import > Formats. Import the Formats dialog box appears:
     1. Click deselect all.
     2. Check the conditional text settings .
     3. Click import.

  All the documents in your book have now the same conditional text as your chosen document settings.

• hard drive internal, now recognized as removable storage device?

  everything was fine until I updated my motherboard drivers. I have an Abit NF-M2SV (Nforce 405) and after the updated drivers (chipset, storage, etc.) and my second hard drive which is SATA, arose in the removable storage as if it were a memory stick. If I stop the device it tells me to unplug it now, but it is internal and the system is always on. Anyone know what may have caused this?
  Thank you

  chris1991,
  Thank you for visiting the Microsoft Answers community forum.

  If this happens when you updated your motherboard drivers, then you need to contact the manufacturer of your motherboard to see if they have a fix for it.  In the meantime, you can try restoring your system to a point in time before you updated the drivers from the motherboard.

  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  If this does not work, you can try to roll back the motherboard drivers, but it's very risky, so you should back up your system first.

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  Is attached a screenshot of my screen with the context menu to show/hide tabs. I want to delete some of them and let others. Please help me to know how. Thank you!

  Hmm, maybe this "one-time" imported into the new preference? Try this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cust and make a pause so that the list is filtered

  (3) double-click the preference of browser.uiCustomization.state and the content must be highlighted in a small dialog box.

  (4) copy the whole line and paste it into Notepad and save it as a backup.

  (5) in Firefox, click on the button '3-bar' menu > developer > Notepad. Remove the comment that appears and paste data preferably, that must appear on a long line. Click on the "Pretty Print" button to make it more readable.

  So I hope that you can spot the extra toolbars and change them out, taking care to preserve the commas between the elements.

  I don't have the extra toolbars in mine, but I copied and pasted back this spaced format and Firefox was able to handle it well. I went into customize and moved a button, and when I left, Firefox has rewritten the preference set as a single line. Assuming that yours works fine, then you can get rid of the backup from step (4).

• Not all programs show in Add/Remove programs from the control panel

  Help me please when I go to Control Panel then add and remove programs, that nothing comes and he says its finished loading but all my programs and I scanned with norton 360, malwarebytes, SUPERantispyware, and sophos anti-rootkit, and all of them reported anything.

  Why not post on a forum that is more appropriate for your operating system Windows-
  http://social.answers.Microsoft.com/forums/en-us/group/WindowsAnswers

  This forum addresses the Windows updates.

  Thank you.

  TaurArian [MVP] 2005-2010 - Update Services

• After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

  After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

  Cmd - H show/hide extras, deselects cmd - D.