show / hide the Group of radio buttons

Similar Questions

• Display image in the Group of radio buttons?

  Hello
  
  I tried to add images on my radio button group
  

  select '<img src="/../i/ok.png">' as d, 1 as r from dual

  But he replaces signs ' < ' and ' > "by" & lt; "and"& gt;""
  
  No idea how to avoid html to replace these characters?
  
  (I use Apex 4.0)
  
  Thank you
  
  Uji

  Hi Uji,

  To display an image on your radio group, using your original query:

  select '' as d, 1 as r from dual
  

  .. quality radio group element and scroll down to the area of 'Security' of the page this article Page, set 'Escape special characters' Noand click on apply changes. Now, when you run the page, you will see your image in your group of radio buttons.

  Kind regards
  Hilary

• fields to show or hide the function of radio button

  Hi, in my form there are two radio buttons available. one is for 'Yes' and other is for the 'no '. There is also another 6 available and that all fields 6 fields are hidden by default.  If I click on 'Yes' below 3 fields should visible.

  text-1

  text-2

  text-3

  If I click on "no" above 3 fields must hide & 3 fields should visible below.

  text-4

  text-5

  text-6

  then u can pls give me JavaScript to manage my requirement. Thanks in advance.

  Hiding and showing form fields by Thom Parker

  Disabling (graying-out) form fields by Thom Parker

• How to set the default value for the Group of radio buttons

  Hello
  Here's my situation.
  I have a form of HTML text. In the form, I have an element called "* drinks * ' and its options in the radio button group or coffee, tea. Now, I want to put a default value("NA") to the radio of drinks group. Is it feasible. If so, how. Advice would be useful. Thank you

  Hello!

  You can also set a default value in the radio unit of page article under the default setings. Here, you must put the result value (if you have static: Café;) One, the; B, NA; C you write C if you want NA default choice) of your radio.

  concerning

• define a field as requires it, from the Group of radio buttons

  I saw not a strong response if you can set the field as required - in this case a date field based on the selection of a previous radio button.

  A post was that you couldn't do with calc form, it will have to be JS.

  I'm not the best at that.  The form is sent by mail on a web server for data capture.

  Any help would be appreciated.

  Hello

  Yes, you can change the status of 'necessary' to one or more fields by using the validate.nullTest in Formcalc or Javascript. You can use script like this in the output of the option button event:

  If (this.rawValue == 1) then
  DateTimeField1.validate.nullTest = "error".
  on the other
  DateTimeField1.validate.nullTest = "disabled".
  endif

  'error' sets the field referenced on required; considering that the 'disabled' changes back to not required.

  Good luck

  Niall

• Is it possible to display an image instead of the button in a group of radio buttons?

  I am building an application must work with touch screens. I would like to show the buttons of the largest radio group as they are by default. Is it possible to make them appear larger, or to display a custom instead of the radio group image?
  
  Francisco

  Hi Francisco,.

  Back to your original question. Take a look at http://www.456bereastreet.com/lab/styling-form-controls-revisited/radio-button/ or look

  radio css
  

  on Google for examples of how you can change the icon of the radio group selection.

  On the use of the images himself for the Group of radio buttons. You can always include the necessary HTML tags in the query LOV himself as well. Just a very simple example:

  select ''||dname as d,
         deptno as r
    from dept
   order by dname
  

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

• Group of radio buttons with the URL of image in a table

  I try to display text and an image for a group of radio buttons to make the form look like

  text (*) for point 1 {image for point 1}

  text () for article 2 item 2 {image}

  text () to the point 3 {image for point 3}

  I found these:

  Re: Is it possible to display an image instead of the button in a group of radio buttons?

  Display image in the Group of radio buttons?

  It looks like all I have to do is create a LOV that looks like:

  SELECT {complex stuff that generates the text string, tag img and image URL}

  DB_PK

  OF dynamic_view_for_lov - public synonym

  But my images are stored in a table.

  I was able to create an IR using the "= BLOB column Format" method.

  The SQL code for the report looks like:

  Select

  display_text, db_pk, image_len, image_clob

  of dynamic_view_for_lov - public synonym

  And the IMAGE_LEN column number/Date Format is:

  IMAGE: DYNAMIC_VIEW_FOR_LOV:IMAGE_BLOB:DB_PK:Inline:Download

  My question: how to create the URL for the tag img for the LOV?

  Thank you very much

  MK

  MikeKutz wrote:

  My question: how to create the URL for the tag img for the LOV?

  Use of the apex_util.get_blob_file_src method of the API.

• validation of a group of radio buttons

  Hello
  I have an exclusive raido button group contains "I agree" and "I disagree". By default, I do not accept should I get selected when the form is loaded and if the user clicks, I agree then that the shape must submit.

  I tried to script: writes the script on the commit event of the Group of radio buttons, but initially when the form loads, the validation is triggered because by default, I disagree is selected.

  Pls let me know how can I achieve this requirement?

  Thank you

  Ludovic

  Hi Eric,.

  We use a hidden button to submit the form. In the actual submit button, if satisfied of our condition of radiobutton we can call the click/mouseUp event of the hidden submit button.

  HiddenButton: Button type: submit. Specify the url of the site/mail you want to submit. Make it hidden / exclusion of the layout (at your convenience)

  Then in the actual submit button.

  If (AgreementRadioButton.value is "I oppose")

  {

  HiddenEmail.execEvent ("click");

  }

  on the other

  {

  App.Alert ("Please select I agree");

  }

  Note: The actual submit button would be simply a button with no bids.

  Hope this will help.

  Thank you.

  Sidonie.

• can radio buttons show/hide the info in an interactive pdf?

  Hello. I have a question to which I have been faced with during some time... hoping someone can help.

  I create a document in InDesign CS6. It's basically a guide with a joint questionnaire.

  I have forward and back buttons work properly - so that they take you from one page to another.

  However, the more difficult question is I want to have interactivity with the use of radio buttons and eventually the check boxes. Thus, for example, on page 1, I have a question multiple choice where there are three choices. Clicking the wrong answer shows a block of text saying 'no it's wrong' and clicking on the appropriate radio button shows the words "Yes, correct."

  I have created three blocks of text and make it into a multi-state object.

  Three problems:

  1. option buttons seem to be the option for "the State" in the buttons and Forms dialog box
  2. even if that were the case - the State Road seems to be only swf, non-interactive pdf form - is there a way to change this?
  3. script assuming that there IS a way, everything can be put in place so that instead of using radio buttons I have use of check boxes that only give the correct answer if the correct check boxes are selected.

  I would stick to indesign to do this, however, I think that the option is perhaps more suited for this problem?

  Many thanks in advance,

  SunsV

  1 - make 3 images and convert it into boxes option...

  Text blocks 2 2-make (Yes, his right) (No, the wrong) and convert it to buttons - rename it (Righ, evil)

  3 - Click on each radio button and apply action: Show/Hide button and form and on the visibility to activate the globe eye for buttons wrong or right.

  

• How to programmatically set the option button selected on a group of radio buttons

  Hello, I have another question for you.

  How can I set an option specifically button selected programmatically on a group of Radio buttons? I think it's very simple, but I can't find a solution.

  Thank you in advance.

  You can use the SetActiveCtrl function

  

• How can I change the value of a group of radio buttons to a bidding process?

  I have an interactive report on page 1, and I'm passing the value of a column to the page of the two group of radio buttons.
  
  I wish I could switch this radio group and pass the parameter currently displayed in the submission process:
  
  #OWNER #. (CHPWD)
  PUSERNAME = >: P2_USERNAME,.
  PPASSWORD = >: P2_NEWPASSWORD,.
  (PUNLOCK = >: P2_RADIO_LOCKED);
  
  : P2_RADIO_LOCKED is not acquire any value that I can see.
  
  Published by: xerosaburu on August 17, 2009 15:07
  
  Published by: xerosaburu on August 17, 2009 15:08

  Hello:

  You could modify the code for the page process of implantation of the rocker.

  begin
  #OWNER#.CHPWD(
  PUSERNAME => :P2_USERNAME,
  PPASSWORD => :P2_NEWPASSWORD,
  PUNLOCK => :P2_RADIO_LOCKED);
  select decode(:P2_RADIO_LOCKED,'1','2','2','1) into :P2_RADIO_LOCKED from dual;
  end;
  

  CITY

• change field bitmap on the focus of radio button

  Hello

  I have 4 radio buttons in a group of radio buttons. Each of the radio buttons has a picture that is linked to. I want to change the image of a bitmap field whenever a radio button got the update.

  How can I do?

  Thanks in advance.

  Call super.onFocus and super.onUnfocus, as well as the change of the bitmap of treatment.

• Where the control to show/hide the removable storage settings

  I try to install Win 8 Prof.  I have a HP desktop with a CD player and 4 slots for removable media devices.

  In a previous installation, there was a way to show/hide the removable drives / slots unless there was inserted media.

  I don't know where the setting.  I tried the

  strategies group without result.

  I also lost the capacity of my office to recognize and attach my CD player.  It appears in Device Manager, but he said he is not physically attached.

  I can boot from the drive.

  Help, please.

  Have you installed Windows 8 or you try to install it?

  I use Windows 7 on my PC and in that, the option "Hide or show empty leads in computer folder" is located in the view tab of the window "Options records". It should be the same in Windows 8 as well.

  Visit this link:

  http://www.SevenForums.com/tutorials/6969-drives-hide-show-empty-drives-computer-folder.html

  If Windows 8 will not detect the device, try the steps in this link:

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

• How to name a new group automatically radio buttons?

  Hello!

  I have a problem. I have a form with several fields type. The process:

  Step 1. I create the Text1 field (I won't name the fields, leave the default name).

  Step 2. Create a group of radio buttons, automatically named Group2 with three options (choice1, lendemain2, choice 3)

  Step 3. Create field Text3 and Text4 .

  Step 4. Create the check Box5.

  Step 5. (The problem)! I want to create a new radio (independent) group, but the Acrobat ' t not to create a new group named groupe6 (or even), but gives new options for the Group 2 in step 2.

  How can I configure which allow the new group to get a new name, instead to extend the existing group with the new options? I know that when I create a new button, I can rename the group, but I would get an automatic if possible method.

  Thank you!!!

  

  I'm afraid that you'll just have to rename when you want to start a new group. Radio buttons are unique, because it makes sense to automatically keep the new radio buttons in the same group, as opposed to automatically rename the fields with each new addition of the same type of field. I guess Adobe could change things so that if another field type a new group name was added after the last button of the radio, is used if another radio button is added, you can submit a feature request for this.

• Question about disabling a single button in a group of radio buttons

  I'm working with Acrobat version 9.5.5.  I am trying to create a PDF form to fill live rather than on a web form.  Most of it's over, but I have a problem that I can't solve.

  At the beginning of the form, I have a group of radio buttons.  The three options in the group are 'Premium Member', 'Réguiler' and "Membership in decline at the moment."

  If someone checks the "composition of decline" there is a second group of radio buttons later in the form which has a number of options.  One of these options is for members to ask only to send the registration form for the annual banquet.  Only members may attend the annual banquet, if I don't want non-members to have the opportunity to select this radio button.  On the other hand, I don't want non-members have the opportunity to select other options in the radio button group.  In short, if someone chooses 'Decline membership at that time' I don't turn off only one option in a group of radio buttons later.

  A web form is not an option at this time, and of course, I am brand new to javascript, so I don't know where to start for this script.

  You can add a script to the mouse event to the top of the box in question in the second group that checks to see if it is selected, and it checks the value of the first group. If it is a third party, so don't let the choice.

  For example, you can use the following script the mouse to the top of the option button in the second group, and it will prevent it from being selected:

  Get the value of the first group of radio button

  var v1 = getField("Membership").value;

  Get the value of this option button

  var v2 = event.target.value;

  Do not let this option button to select if the membership has been denied

  If (v1 = 'Decline' & v2! == 'Off') {}

  Event.Target.Value = 'Off ';

  App.Alert ("message of error goes here.", 1);

  }

  Here, the value of exports (aka Button value, or what they call it now) is set to "Deny" for the corresponding button in the first group ("membership"), then you need to replace those with whatever you use.