Show the vertical lines of blue green on Tecra M

Similar Questions

• Show the vertical lines on the Qosmio

  Suddenly vertical dark lines across display.

  I plugged it to an external monitor, no problem.

  This means that my screen is US or?

  First of all, it would be interesting to know what Qosmio model you have?

• Tecra M3: black screen on startup, the vertical lines on the external monitor

  Hi all

  I searched a lot on the Internet for a solution to this specific problem, I have, but did not find a thread
  with exactly the same problem. I have a Toshiba Tecra M3 with Windows XP SP 3. Two weeks ago, I encountered problems with the commissioning. After a couple of times to restart it would work. Then it became worse... When I try to run I see no splash... the screen remains black. If I press the power button, I hear the fan and CD player but no screen. It is totally black. I know its working because I can go (blindly) in the installation program. Press end, and then press Y and enter. The computer will restart but still no screen.

  I plugged it to an external monitor. Pressing Fn and F5 allows switching. The external monitor shows different
  vertical lines in multiple colors. They change if I go to settings or you try to start windows.

  Does anyone have a solution to these problems?

  I have fear of solution can be given by the service only.
  In my view, this question must be tested properly.

  I can't say for sure, but to me that sounds like a technical question. Without testing you will know for sure what is the problem.
  Here on the forum we can only speculate why this happen.

  As you can see on notebooka? s LCD problem. On external it doesnâ? t properly work as well. It may be a faulty graphics card.
  Try to contact the nearest authorized Toshiba service and speak with the technician.

• Offset of the vertical lines

  A couple of weeks ago, I bought a Photosmart 7520 to replace my HP D110. I posted a problem here and received a quick solution. I hope that this happen.

  My problem is with vertical lines. The first file that contained a small table is a downloaded pdf file. When I printed this some vertical lines shifted just a little bit - small but noticeable. In fact, I did not notice it until I returned to it after printing an Excel spreadsheet and the problem of the vertical line noticing.

  At this point, I opened HP printer Assistant, to maintain the printer and lined up the printing and print heads cleaning heads. Clean print heads print page showed several vertical line for verification and they were very good: no earthquake. I still once printed the pdf and again once there are sections that were slightly off. Then, I created a small table in Word and do print. Same result: small shift.

  I made another clean and align another and another test print. Vertical lines have always shifted.

  The move was in line. I mean, when I looked at two different prints of the table of the word, the movement was in the same places; identical.

  The spreadsheet has multiple lines. As I scan down the vertical border between adjacent cells, I see a slight shift to the left on the bottom of the third cell. Sweeping down more of three cells the border comes to new right there where it was originally. That displacement, then back left again to the right, seems to repeat on all three rows.

  That describes my problem.

  Any ideas?

  Thank you.

  (My system is Windows7 64 bit running on a Dell StudioXPS computer).

  I must admit that I forgot to update my request.

  After a few days don't get any suggestion, I called the store where I bought the printer asking if I could come and exchange it for the same model. I was told that, because it was more than two weeks after the purchase, there will be an additional cost. Until I reluctantly paid the extra money, I called HP support.

  Basically, what the tech support person is to uninstall the printer driver and install the latest version. Which corrects the problem. The process took time, but the result is that the printer works fine now, including the vertical lines.

• HP 3050 leaves the vertical line of toner on paper

  Let the vertical line of toner on paper

  Hello

  You should check with the help of HP as it's a problem with the printer and not Windows.
  Also check their forums where there are others with the same printer.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Photo of reminder on the monitor with the vertical strips/stripes blue and Red

  Play a clip in the timeline, the monitor and the xetrnal monitor shows the clip with thin red vertical lines/bands at constant distances.

  The AVI in body 5.5 clip plays, I imported it to the 5.5 even as asset, but playing the AVI in still image is distorted, as mentioned.

  I work in PAL.

  Anyone suggestions what's happened and how to eliminate the distortion? Thanks for the reply.

  Chris

  If you have an nVidia graphics card, and then set the 3D settings 'let the application decide '.  Vertical scratches should disappear.

  -Jeff

• Flashing of the vertical lines in the tab bar?

  There are small vertical lines in the tab bar. They appear after the closing of the tabs. They are flashing, then change places when I place the cursor on any Firefox buttons or bars. And sometimes, they are flashing and the text cursor in the address bar of mirror.

  Disable all modules and themes does not affect them.

  I'll try to add a screenshot of the problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• solid color 1 color to the constants of red/blue/green

  Hello

  Does anyone know how to convert 1 color.

  Let's say ORANGE.

  his Red value = 16448250

  its Green value = 29535

  blue = value 16711680

  is there a way to know that ORANGE and blue/green value?

  I suppose to do something like that?

  

  Thanks in advance

  Try the RGB VI color:

  

• OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

  There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

  Hi gljatlaw,

  I see that you are having problems of quality of scan.  I'll take a look at the document below.

  Scan quality

  Let me know how it goes.

• OfficeJet Pro L7780: Officejet Pro L7780 missing of the vertical lines on text &amp; photos

  Everything that I try to print has lack of vertical lines, text or photos. Happens if I print from my computer or if I try to copy a page directly to the printer. I went through the troubleshooting page full... the ink is all well heads, all good impression. Whenever I try to run a printer align it does not end the page. Whenever I have nothing he's trying to align printer print when its done & still cannot print the entire page. Gives me an error and says to check my documataion. I checked the book with my printer & there is nothing in this whole problem.

  Help, please!

  Hi @LockGal,

  Welcome to the Forums of HP Support!

  I see that you are having problems with your HP Officejet Pro L7780 printer aligning and printing vertical lines. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration that this must be for you. Looks like there are two separate issues. When the printer clean print heads and not properly align itself, this indicates that there is a problem with the cartridge, the print head or the line break. For vertical lines, it is usually independent for cartridges and print heads (not being is not a print quality problem). The paper type and print settings might be the problem.

  To help determine the cause have you used this document: troubleshoot print quality HP Officejet Pro L7500, L7600, and L7700 all-in-One Printer Series?

  Use the document in the order will help you determine if the print heads need to be replaced. If so, please contact HP.

  Please confirm that the vertical or horizontal lines?

  NOTE: are not replace the cartridges and printheads for vertical streaks in a print. Instead, check the paper as directed earlier in this document, or search for a document that addresses this issue. Vertical streaks on copies can often be fixed by cleaning the scanner glass.

  • L7300 of HP Officejet Pro L7500, L7600 and series L7700 each - vertical stripes, lines or streaks on Copies, faxes or scan

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• What is the cause of the vertical lines of color on the monitor HP ZE4900 laptop o? S Windows XP

  I have colored vertical lines on the screen of the laptop monitor, but not on a second monitor connected to the VGA output port

  Ok thank you

• Action/Script Photoshop to place the vertical line at the center of the Image

  How to create an action (or a script) in Photoshop that creates a vertical line in the center of the page?

  Here is an example of what I'm looking for.

  

  First go to view > rulers, then right-click on the rule, and the percent change units.

  (so the action registers per cent and will work on different size documents)

  Then drag a vertical guide at the Center, drag one to the top of the image and the other down.

  (the goal is so the online tool is aligned with the top and down and you know where is the center of the document)

  

  For action, you can use the online tool and just save lines from the top of the image down along the center guide.

  

  

• Hide the header and show the child lines in the record of decision

  Hello

  I have this requirement, where I need show only the child report of lines and hide the out line of position. Is this possible?

  For example. The report from now looks to below: -.

  • The ABC test form is col.
    • Question1 is pass
    • Question2 is pass
    • Question3 is Yes.
    • East 1/Question4.
    • Question5 is running.

  
  

  I want to make my report decision to look like below without the line " " The ABC test form is "

  • Question1 is pass
  • Question2 is pass
  • Question3 is Yes.
  • East 1/Question4.
  • Question5 is running.

  Kind regards

  Suan
  

  If you set the attribute 'the ABC test form is pass' silent that it will not be displayed in the record of decision, but its subitems will be.

  1. Make sure that the attribute "the ABC test form is pass" is a properties file
  2. Double-click it in the file properties, and then select the record of decision.
  3. Check if Invisible: 'True' option.

  See "Hide in a record of decision information" in Oracle user modeling Strategy Guide

• break a subform that contains vertical lines between pages / break the vertical lines between pages

  Hello

  I have a table whose fields can develop. There is an another subform on the side that contains two vertical lines with the height increases if the height of the table increases. The table and the subform are in a provision passed. The challenge is that the subform with the lines does not break between pages. The subform is enabled to allow page breaks, but still it does not break. How to get there?

  I solved by creating the columns on the side and leave the table and breaking lines between pages. The cell border will serve as lines.

• Trace image invert the colors, showing the black lines in white on black background, helps!

  I used the feature to trace of image for the drawings to the mark several times without any problems.  Today, it is worship the colors, the black lines are now white and white background is black. Help?

  Also for some reason today when I would stick a picture that I copied from Photoshop it would stick much more than the art Board and original. No idea how to solve this problem, or why she is acting funny today?

  menusplus,

  When things become suddenly strange, it may be interesting to try to list.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (B) it is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html