showing results on the image

Similar Questions

• I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

  recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

  Take a look at this: generic icons | Files camera raw | Adobe Bridge

• Create a slide show and change the image by clicking on it? (!)

  How can I create a slide show and change the images by clicking on them?

  here you can find an example: http://www.thisiscatalogue.co.UK/around-the-way/

  Thank you!

  solved

• Windows 7 update history not showing after restore the Image of external hard drive

  I just restored windows 7 from a system image on an external hard drive.  When I used windows update after restoration update history had disappeared, although I found the updates in the updates installed, I wonder if something is wrong and if all my updates are in place and why did do that AND, can I GET BACK. ?. ?. ?. Everything seems to work fine... /.
  Thanks and let me know.
  Dave

  Hello

  The version history is just a list containing the results of the applied updates and non-operational systematics
  importance. The installed updates is the important file that shows what updates have been installed.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• iPhoto will show not all the images in 2016

  Since the beginning of the year, all the images that I imported into iPhoto just disappear. They are there in the depths of the file system, but iPhoto refuses to show them. It shows the last import correctly, but as soon as I import something else, these images disappear iPhoto. "In the last 12 months' shows photos for 2015, up to the last import 29/12. "All photos" also stops at 12 29, 2015.

  I had to repair and rebuild on the database - it doesn't matter. I also searched the web but found nothing relevant.

  Most likely - the date on your camera is set to false

  Right-click on either in the last import and select Show in times where it is - without doubt, you will immediately see the problem and the most likely cause is your date setting camera

  LN

• How to prevent the images as a slide show running in the image window when I first connect?

  When I connect firstly in my account photos are displayed as a slide show. I deleted the images from files, but they always show in the images window.

  Hi Asanc,

  Follow the steps below to stop random playback on the Photos app:

  1. Open the Photos app
  2. Press the Windows key + C
  3. Select settings
  4. Select Options
  5. Under pictures of Shuffle on the tile of the app, move the switch to Off

  Let us know if that helps.

• Reader Adobe is not showing is not the images

  I try to open the pdf document includes with the images. Text is displayed correctly, but the images are dimmed. I can open the same document with images in Nitro Pro, but not with Adobe, which means no problems with the file damage.

  Hi shahabk,

  Please make sure that show large Images in selected in the Page display preferences. Choose Edition > Preferences (Windows) or Reader > preferences (Mac OS), and then click the display of the Page category. View the large Images option is to halfway to the bottom of the dialog box.

  Best,

  Sara

• Screen saver slide show displays all the images

  original title: screen saver

  I chose pictures like under settings and screen saver, I choose my photos but it doesn't work because of a couple of records not all.  Why?

  Your other files cannot be included in your image library.  Right click on the folder and select "include in library > images.  Then set your screen saver to use your image library.

• IR is not for show results until the functions are applied

  I have an IR which produces about 400 000 information lines for two months to a data value. The user is not interested in all these lines. I would like to view the report after the filters (that is, functions such as filters, aggregates, etc.) have been selected. How can this be accomplished?
  
  Can someone direct me to the documentation on how to do this?
  
  Robert
  http://apexcssjs.blogspot.com

  Hi, Robert.

  I saw your post and thought I might be able to help.

  Your question it seems that you want is to have your IR report appear without first recovering data. Instead, you want users to have a chance to choose the conditions of filtering and whatnot before actually running the report.

  I found the following link that deals with this feature in a very simple way.

  http://www.apexsolutions.de/blog/Allgemein/interactive-report-without-initial-results/

  I hope this helps you.

  Elijah

• Is it possible in Windows Live Mail to change the settings for the images remain in the body of the email, not in a slide show?

  change how I get pictures on incoming emails

  Most, but not all emails that I receive that contains images come as 'slide show', and where the image should be, there is a blank box with a red x.  Is it possible in Windows Live Mail to change the settings for the images remain in the body of the email, not in a slide show?

  I know that they are sent correctly, because I send on my iPod and the photos are where they should be.

  I have Windows 7 and I hope you can help me.

  Thank you

  Hello

  ·         What browser do you use?

  ·         What happens when you click on the slideshow of the photo? The photos are displayed when you click the slide show?

  If you use Internet Explorer, then I would suggest that you follow the instructions in the link and check if this can help:

  http://support.Microsoft.com/kb/283807

  If operations since the link above does not help then I suggest that you post your query on the Windows Live forum for assistance:

  http://windowslivehelp.com/product.aspx?ProductID=15

• Add a slide show using apDivs - will not focus / clashes with the images.

  Hey guys,.

  I'll be as fast and accurate as possible. I am new to Dreamweaver and I'm having a few problems in my attempts to create a Web site simple portfolio.

  I am trying to add in a base image slideshow using apDivs. I had a look online and found a few fantastic JQuery slideshows, and I ended up adapting it for use on my site;

  http://www.queness.com/post/923/create-a-simple-infinite-carousel-with-jQuery

  I have pictures in the base of my site and I wanted to add the slideshow above them (and the same thing for a couple of YouTube embeded videos too.) I added in an apDiv and placed the code for the slide show inside. This created a layer that goes on top of the image, and I am able to put the code for the slide show into it without any problems (providing the position of the apDiv has the Absolute value).

  {#apDiv1}
  position: absolute;
  top: 419px;
  left: 400px;
  Width: 555px;
  height: 480px;
  z-index: 1;
  }

  The problem I have is lining up the cursed thing. Of course, defining the apDiv absolute positioning is a bad idea, because while it was going on well in a resolution, it is not in another. I tried to change the position of the apDiv for relative and then adding changes to my code;

  {#apDiv1}
  position: relative;

  Width: 555px;
  height: 480px;

  left margin: auto;
  margin-right: auto;
  z-index: 1;
  }

  This centers my slideshow (which is beautiful), but is no longer layers on the top of the image (since it seems to work only when the position is set to absolute.) Instead, the slide show appears below the image rather than on top.

  Is there a way possible, I can keep the apDiv (which contains the slide show) centered while standing on the top of the image? As I said, it will layer on very well when the absolute value, but won't focus. When the relative value, it will center but not layer on top. It is one or the other, and I'm pulling my hair out top at the moment.

  If anyone can give any help, please Please let me know. I've included a Notepad document, including all of my code on the page (including my wacky comments) to the address below, if it helps in any way;

  http://www.box.NET/shared/5nufqc78jbg0mfkb00n5

  Do #container position: relative.  Do Divap1 position: absolute and adjust high/left to place values in the container you want.

  (You realize one) your page is too wide, and b) there is no content on the page, right?

• Quality and size of the Image of DSC RX10

  Follows some practical issues, I found no answers on in the product manual, in addition, as in WEB based help to http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/index.html Guide

  What is a practical difference between JPEG images created, except the size (about 7 MB, 11 MB, 15 MB), when Ratio of Aspect 3:2 & L:20 M is defined (by default), for Image quality parameters following: 'Standard', 'Fine' & "Extra Fine"?

  How much image quality will be downgraded, if the quality of the Image 'Standard' will be used instead of a value of "Thin" by default? As long as I understand, "Extra Fine" logical value only when a very large images will be printed, no?

  What quality of the image is going to be downgraded, if 10 M or 5 M must be used instead of 20 M, as well as the value of the Image quality?

  Add a new more question today.

  What is a main difference between the "Intelligent Auto" and "Superior Auto" modes? Be smart mode (the default), I can change to higher mode by means, for example, the fn

  key, during the shooting.

  Thank you in advance.

  Kind regards

  Valery

  Hi Valery, there.

  You do not need to create a new topic, it will be easier for you to review everything in this thread. I will try to give you the answer to your last questions better than I can.

  [Soft skin effect] recognizes skin tones and reduces the appearance of wrinkles and stains without affecting the rest of the shooting. Add levels low, medium, or strong [soft skin effect] depending on how it is defined (see the example below).

  

  As mentioned on my previous post, you can only turn the top display panel on or off. The information displayed on the Panel depends on what your camera settings are light or used. The description of each information on DSC-RX10 Help Guidecan be found.

  [The AEL w / shutter] is a function that can be used when you want to crop the scene, but keep the current risks of change. It allows the camera keep the same brightness between takes. Is set to [Auto], exposure will be set after the update is automatically adjusted when [Focus] is set to [Single-shot AF] and set it on [you] If you plan to use other [Mode Focus] just as it is described in this Guide. [Off] setting is very explicit.

  [SNA] or scene selection is another type of automatic mode where the camera settings are twisted with a configuration preset for common scenarios shooting or scenes and mode [Auto smart] will automatically do everything necessary to provide optimal results. It's maybe not as good as shooting manually, after all the camera is still a machine that does not know how you would like a picture to show. It would be up to you which mode will give you the best result of the image of your making.

  If my post answered your question, please mark it as "accept as a Solution.

• set myImage.src = preloadedImage.src reloads the image instead of using the cache. How can I work around this?

  I am preloading of an image and then set an image already on the page for a preloaded image by setting equal to the preloaded images CBC CBC. This results in the image image be reloaded, although it should be cached. How can I get to Exchange just in the cached image?

  Try announcement Web development / standards evangelism MozillaZine forum. The helpers there are better informed on the problems of development of web page with Firefox.
  
  http://forums.mozillazine.org/viewforum.php?f=25
  
  You will need to register and log in to post in this forum.

• A movie or slideshow of .psd files that preserves the image quality? (v10)

  Hello

  I spent a lot of time creating hundreds of. PSD images that I thought I would open first and create a movie with - incorporating a pause of 5 seconds on each photo.

  The problem is even if the images are superb, the movie looks like shit.  The image and text on the image is blurred.  If I hit the break he straightens up and looks great (just like the original. PSD files).

  This happens in the 'snapshot' film and slide show.

  Please tell me that I don't have to create a PowerPoint slide show to keep the image quality!  Please, I beg you!  I tried it with and without "Autoanalyze" and "autoedit".

  I don't understand, but I know I'm missing something!

  Optionally you can offer guidance will be greatly appreciated.

  If the reading of psd files is the problem (I think), you can try to right click on the monitor and then select the playtback quality to be 'Up' this ensure a display an image complete and do not have the artifacts you mentioned.

  The exported sequence will not have the issues you mentioned regardless of the quality of reading... You can see this or something is broken in PrE10?

• Google Image Search shows only one page of results, then the gray boxes

  Since several months ago, google search for images watch gray boxes instead of the thumbnails after a random number of thumbnails correctly indicated.

  I've seen several posts on the web and several suggestions, but none solved the problem for me (FF 20.0.1, Windows Vista and Windows 7).

  Finally, I tracked down the source of the problem and found a workaround:

  Looking at the traffic on my firewall (iptables nat) I found this during the loading of an image search result:
  192.168.168.159 - > 74.125.234.226 TLSv1 alert (level: Fatal, Description: unexpected Message)

  So, I realized that since there is a time firefox uses https whenever we use google.

  The solution is after loading the image (with the gray boxes) search result, just replace the https to http protocol in the browser's address bar. Which loads the remaining without problem images when you scroll to the bottom of the page.

  IE does not have the problem because it does not have this redirect. If you load a 'good' search results in Internet Explorer, then replace http with https in the address bar, the same problem occurs in Internet Explorer.

  (so, apologize for posting this here, because it's not really a matter of "firefox", but given that most people are complaining that it is, I though it would be a good place for the available information)

  Thanks, but as I said, that is done the same if forced to https. I can boot to linux, and FF is the same, like chrome.

  So it's not anything related to the cache, cookies, or plugins or even FF FF. It's probably something in the firewall. I just posted it here because other people have been blaming FF for this problem (it is more likely to be seen in FF, because it was google redirect to https for 14.0.1).

  BR,

  Joao S Veiga