Windows 7 update history not showing after restore the Image of external hard drive

Similar Questions

• Windows Update does not work after restoring the system

  HP Compaq 6000 Pro, bought in early 2011. Windows 7 32 bit. I recently did a factory restore to return to a clean system using factory restore partition. The restoration seems complete ok, and I have a Windows 7 clean and functional configuration.

  However, the Update window will not work (and of course, it is now quite an old installation of Windows 7) it comes up with the Red Cross and the message "Windows Update cannot currently check for updates because the service is not running." Other notable issues that may or may not be related are: Windows Defender won't start not (0 x 80070564). HP Support Assistant reports it needs to update, but the update fails (because then it just says: it should be updated again)

  What I've tried so far:

  Verified that the BITS and the WU services are both actually run

  Uninstalled the McAfee antivirus software

  Tried to install Windows 7 SP1 directly (happens with "catastrophic failure")

  Tried Windows Update (wusa.exe) stand-alone installation / WU Readiness tool-fail (Oxc8000247)

  MS difficulty he said Troubleshooter it corrects problems, but nothing changes later

  (In short, tried all suggestions from MS support)

  It drives me crazy - any help will be appreciated!

  ISO should work, just be sure to download the version of Pro 32-bit.

• Restore files after restoring the image using Windows backup

  Running W7 pro 64-bit. Had the problems of virus/malware, finally restored my discs from image system, dated 2 weeks ago and then restore backup files dated Windows from yesterday.

  When I go to save / restore my files, the update does not list a backup happened 2/14, the date of the restored image. When I go to manage Windows backup disk space, and then select backup period to remove the last date is 3/1, when I did the last backup. The date & time system is running with a date of 3/2.

  How can I fix it?

  Hello

  Thank you for visiting Microsoft Community.

  As I understood it, you experience the problem with changes to date during the restoration of files after restoring the image using Windows backup on the system.

  Certainly, I understand your concern.

  I suggest refer you to the articles below and check if that helps.

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  Note: The article above will help you restore backed up version of the files that are lost, damaged, or changed accidentally. You can also restore files individual, groups of files, or all files that you have saved.

  Recovery and data backup

  https://msdn.Microsoft.com/en-us/library/bb727010.aspx?f=255&MSPPError=-2147217396

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• How can I make a DVD of the restore hidden in my external hard drive partition recovery

  How can I make a DVD of the restore hidden in my external hard drive partition recovery because I want to recover my toshiba satellite L840 that does not respond directly to my hard drive so I put my laptop to an external HARD drive and then I want to copy a DVD recovery partition

  Your question is a bit confusing, you can boot the laptop at all? Have you tried booting in safe mode, you can make a recovery DVD set from there, the folder Toshiba.

  With the drive in the Toshiba, you should be able to use a F, F10, F11, or F12 key to activate the installation from the partition hidden started upward.

  Otherwise, you can contact Toshiba, and with the model of the product id number and the laptop for Windows, you can buy a set of disks.

• Keywords lost after (re) installation from an external hard drive

  Last weekend, I formatted my HD PC and installed Windows 7 64-bit (previously installed was Vista). Human error was - perhaps - make sure my AppData backup is successful. However, my photo folder was a DHM, and I guess I would be saved anyway.
  I ran the import function of my DHM in LR3 (latest version), and everything has gone just find, except that my keywords were missing. Strange thing however, that my lists of keywords and keyword suggestions were complete, but no connected to the photos (except 1!)
  So my question is, is there something I have missed (outside my AppData folder) which could be fixed, or I'll have to start re-branding (keywording, metadata as dates etc. were imported as well)?

  Thanks in advance,

  OLE K

  When individual images (some but not all in a folder) is missing, click the question mark on the frame of the images in the grid, and navigate to the correct location of the image on your hard drive.

  If an exclamation mark appears in addition to a folder in the Control Panel folder right click on this folder and , that is, navigate to the correct location of the folder on your hard drive.

  Do this for the file above in the hierarchy which show question marks and all subfolders will be found by LR too, provided that the structure of folders and folder names have not changed.

  Question marks appear only when you moved in images / files off LR through your operating system, but also when you rename the files / images outside of LR.

  All of these things, moving images / folders, renamaming images / files are better made in LR. This way LR keeps track of its new location / the new name.

  WW

• I'm trying to restore access to my external hard drive.

  I'm trying to restore access to my external hard drive. I want to support.

  

  Encryption key is not the kay of recovery?

  Sorry, I'm not an expert on encryption. Here are a few options:

  • Check out this link.
  • Start a new post with a descriptive subject line (for example "how to decipher... »). Be sure to include the name of the used encryption tool.

  Since I essentially answered your original question I would that mark you my answer as "response" to this topic.

• My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  My MacBook Pro runs very slowly.  I El Captain 10.11.4 rare apps on it, most are closed while I'm on safari.  My photos take a 125 gb storage capacity.  If that is the question, what external hard drive is recommended?  If not, what is?

  Download and and publish a report of Etrecheck:

  http://etrecheck.com/

  Ciao.

• Windows not to perform a search on my external hard drive

  I have a drive external hard seagate free agent desktop. It works well and I am able to save and retrieve information off of it without problem. However, Windows does not research on the external hard drive. I tried to use it on another computer, and the research was conducted as usual. I do not understand what is happening. Can someone please help with this? It's a drive external hard 750Go, and it is difficult to search manually.

  I tried to search on my memory stick on this computer, and I was able to do it without problem. The only problem is to find between this computer and the external hard drive.

  You must enable the disc to the search index.  Here are the procedures (there are several procedures in this document - I think that these are the second most): http://www.vistax64.com/tutorials/69564-index-enable-disable.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 does not recognize the new WD external hard drive added to the usb port

  Recently, I tried to add my third USB WD hard drive to my computer.  It's a My Book Essential.  The meter turns and the virtual cd drive is listed in WD, but the hard drive itself does not appear on the list of devices with a drive letter.  My my first two books are readers: J:, and L: I have no "new device found" message   I search for new devices and it the PC do not find anything.  If I click on the virtual CD drive (M :) it askes if I want the computer to allow WD to make changes...) I say Yes and the screen flashes and nothing happens.
  The drive be defective?  Any other ideas?

  Hello

  Have you tried to connect the external hard drive on another USB port?

  Try to connect the WD external hard drive on another computer.

  Follow these steps:

  Method 1: You can run the troubleshooter in the following article and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also, run the Fixit.
  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Check if the external hard drive is recognized in disk management and assign a drive letter to the same.

  To open disk management, follow these steps:

  a. click Start, type disk management in the start search box and press enter.

  (b) if the drive is detected in disk management, I suggest you to assign a drive letter and see if that does the trick.

  For instructions, see this article change, add, or remove a drive letter

• Windows 7 and 8 image on external hard drive?

  Hello, I currently have a laptop running Windows 7. I also have pictures of the system on an external hard drive. My question is though, do a backup of the laptop image a family members running windows 8 will be a problem?

  I ask because I have seen recoveries to be very picky with the stuff, and I don't mean the image of Windows 8 for corrupt/crash one of my previous images of Windows 7.

  Hard disk external, I have three images of Windows 7 already, work around the fact that my recovery like replace the old image with the new by simply adding something the image of the old file name. It's the drive that I would like to ask the new image of Windows 8.

  Thank you in advance.

  I have Images of XP 2 machines and a Windows 7 machine. Did not an Image of my Windows 8 machine yet, but other work.

  The Images of XP was done with Pascale since XP has no builtin imaging application. One belongs to my daughter, the other to a friend. I just recently restored one of the XP images.

• After saving documents to an external hard drive, some of my programs are missing on my computer. I can't find Outlook Express.

  I've been to the export of all my documents to an external hard drive all day... when I got back, some of my programs have disappeared too, especially my outlook express with all my emails (for the last ten years), is not in the programs, or in the menu... where at - it go?

  original title: outlook express to go?

  Have you looked in the control panel I suggested?

  1: enable hidden files.

  Select Show files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  2: go to * c:\program files\outlook express\msimn.exe *. If you find, right-click on it and send to | Desktop (create shortcut). You can open OE?

  If you can't find that, at the very least, you will need to do a repair installation, or perhaps to reinstall XP completely.

• How to restore my backup on external hard drive system

  I did a windows image backup of my Vista system on a Seagate external hard drive. Now I want to restore my system from the backup, but restore in control panel procedures does not recognize the files. Version of Vista professional, Service Pack 2. I tried Virtual PC, and vhd mounting procedures.

  Hello

  read this tutorial on how to do

  To restore a full backup of the computer, you must proceed within the Windows recovery environment. To access the Windows recovery environment, you will need to insert your Vista DVD in the DVD drive on your computer and turn on your computer. The computer starts and you see the BIOS lists the hardware on your computer, and other information. When this information has been disabled, your computer will see that a bootable DVD is inserted and present a prompt similar to the Figure 1 below.

  etc.

  etc.

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

• Computer laptop (Vista) does not take account any new working USB external hard drive

  Hello, I'm under the latest version of Windows Vista Edition Home Premium on a Dell XPS M1210 and spin in the problems with the connection of my second USB external hard drive. In other words, when I plug the drive (a Seagate expansion 1 TB), nothing happens. Literally nothing, no notification of installation of the driver, no sound is played stating that the system recognized the device, no new entry in post working or disk management. I connected this drive on another computer running Windows 7 and it worked without a problem, so I do not suspect the problem to lie in the hard drive, but with my computer. My other external hard drive USB, a Maxtor Basics Portable 250 GB, works perfectly, but there more than two years. I bought the 1 TB Seagate as a backup and an upgrade, but I plan to go back now that there is nothing more than a big black Clipboard with a green LED clear too much room. What can I do about it?

  Hello
   
  Most likely, there is not enough power for the USB port of your machine to the external device do recognize. As a test I would have you test the issue on another USB plug.
   
  I recommend you contact you either OEM (Original Equipment Manufacturer) or the manufacturer of the motherboard if it is a machine of casting House and get the latest chipset drivers for your motherboard.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows 7 asks Me to format the Seagate FreeAgent external hard drive I've used for more than a month

  I used Seagate FreeAgent as my external hard drive for more than a month now, but recently I am unable to access Windows 7 asks me to format it to use it. Somehow I can format the HDD without losing my data?  Or does perform a work around?

  Hi NuVille,

  Before perform us any of the steps, first of all I suggest you to create a backup of the data stored in your external hard drive on another computer.

  To save the data, you can connect your external hard drive on another computer and copy all the files and folders on the other computer. Later, you can connect the external drive to the Windows 7 computer and try to run the disk error checking and check if that helps you solve the problem.

  Access the link below and follow the steps to check the drive for errors and fix it.
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  After completing the disc you error checking, try to check if you can access the drive.

  If the steps above do not I suggest you try to format the hard drive. Access the link below and follow the steps to format the hard drive.
  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

  Note: there is no way to format without losing any data on the disk. Formatting the drive will erase all data.  This is why you must back up the data before formatting the hard drive.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why LR4 shows me two folders to an external hard drive?

  Hello.

  So I don't know that I can explain so I tied this screenshot. LR4 shows two external hard drives 'ESF-PHOTO' when it's really only. It has the same folder on the two 20120523_straight_down called on each, but in each case there are 4 images even though it says 3. Two of these images are reversed, and I think that's why it says 3. I tried the update folder location. I tried to synchronize the folder. I tried to remove the top folder, called 20120523_straight_down, which then gets rid of the ESF-top PHOTO. After that I try to add the image missing fourth to the different 20120523_straight_down folder and it adds just this second ESF-mystery PHOTO by car.

  

  All this happened after I moved the catalog and images on this external hard drive and run Carbon Copy Cloner to support up to a second disc. Once this is done, I restarted LR4 and began working on an image in PS6. When I closed this image and returned to find the Edit version in LR4 I couldn't find it. Once I found it after searching all pictures with its file name that I saw that there were two ESF-PHOTO files.

  When I have tried all the above troubleshooting I unplugged the backup drive.

  It is a difficult question. Any one guide me through on this one can.

  See you soon,.

  Stephen

  MacBook Pro 13 "

  2.4 GHz Intel Core i5

  8 GB RAM

  10.7.4 OS

  External hard drives: LaCie Rugged 500 GB

  Get it sort it out with the help of www.lightroomforums.net

  Here is the link if someone is facing the same itssue.

  http://www.lightroomforums.NET/showthread.php?15906-why-is-LR4-showing-me-two-folders-for-celui-externe-HD