Showing the value of the column in the custom alert

Similar Questions

• Site of the editions show the customer

  I created a site of Muse and one to show the customer - when I publish the site doesn't show up - this is not the link to the server. It worked not-how can I solve this problem?

  Hi Aish,

  I noticed that if I move the folder with all the pages back to where it was created originally it works so - I suppose that it solves.

  (I moved the folder and that's where the problem started).

  Kind regards

  Bridget

• 7'x 18' mural Design, Illustrator CS4 will not produce as small printiable PDF to show the customer

  I design a mural of a 7' x 18' Photo/graphic design for a client.  The output provider said to work in full screen.  However, I need a pdf file, or any type of file that allows to print the image on paper 8.5 x 11 for the customer's review.  I tried to open the file in InDesign and Photoshop, and re-registration, but he still wants to be 7 x 18 feet no matter what format I take.  Any suggestions will be greatly appreciated.

  Use shrink to fit to the print dialog box.

• Need to show the customer the invoice amount is constant for three months

  Assume that the user will give the month and year (ex: March 2011) then result will show all customers whose the invoice amount is same in March, Feb and Jan-2011 and the result will appear in three lines.
  For these, I need to create a point of view and the corresponding query. The combined output should be-
  
  Cust_id Base_month Bill_amount
  
  1 500 03 - 2011
  1 Feb 2011 500
  1 jan-2011 500
  9 Mar 2011 800
  9 Feb 2011 800
  Jan 9, 2011 800
  
  Can someone help me?

  Not clear.

  SQL> select *
    2  from test_bill
    3  order by cust_id,bill_month;
  
     CUST_ID BILL_MONT   BILL_AMT
  ---------- --------- ----------
           1 01-DEC-10        400
           1 01-JAN-11        500
           1 01-FEB-11        500
           1 01-MAR-11        500
           1 01-APR-11        600
           2 01-FEB-11       2000
           2 01-MAR-11       1000
           3 01-JAN-11       1500
           3 01-MAR-11       1500
  
  9 rows selected.
  
  SQL> select cust_id,bill_month,bill_amt
    2  from(
    3  select cust_id,bill_month,bill_amt,
    4         max(case when bill_amt = prev_bill and bill_amt = prev_bill2 then 1 else 0 end)
    5              over (partition by cust_id) flg
    6  from(
    7  select cust_id,bill_month,bill_amt,
    8         lag(bill_amt) over(partition by cust_id order by bill_month) prev_bill,
    9         lag(bill_amt,2) over(partition by cust_id order by bill_month) prev_bill2
   10  from test_bill
   11  where bill_month between add_months(to_date('Mar-11','Mon-yy'),-2) and to_date('Mar-11','Mon-yy')
   12  )
   13  )
   14  where flg = 1;
  
     CUST_ID BILL_MONT   BILL_AMT
  ---------- --------- ----------
           1 01-JAN-11        500
           1 01-FEB-11        500
           1 01-MAR-11        500
  

• Will not show the custom project template

  Hello

  I am trying to create the simplest possible model, just to get an idea how it works according to the instructions in this document. It does not appear in the dialog box create project. He I'm probably missing something obvious, can anyone help?

  The attached zip file is my folder of \ProjectTemplates of , written in LV14 64 bit. She's just a project with a VI called Test and metadata for it. Any help would be appreciated.

  Thank you

  Danielle

  Hi Danielle,

  I was able to get your test pattern appears in my LabVIEW by changing a number of things around. In your XML file, I removed the spaces between the brackets and added in some statements '' Yes. '' I have attached the .xml as a .txt file. I changed it around based on some of the files existing .xml that came with LabVIEW. I hope this helps. Nice day.

  Paul C

• Unable to show the custom workflow

  Hello world

  I use Jdeveloper with JDeveloper 11.1.1.8 extension 11.1.1.7 and Webceter Portal Builder 1.8.

  I created a workflow in Jdeveloper and deployed in WC_spaces server. I added the workflow to shared resources. When I try to access this workflow in my portal, I am unable to find the workflow.

  

  Any help...

  Thanks Vinay,

• How to make the custom alert buttons app?

  I have knowledge of PDF scripting beginner and more high level of knowledge of PDF forms in general. I use Acrobat Pro and InDesign.

  I'm trying to create a series of pop-up alerts that lead to unique results. The problem is the answers "Yes, no, cancel, ok" are not good enough. Is any way to change the names of buttons and more buttons? As the buttons up to 6?

  Why I want to do:

  I am trying to create a PDF character for a role play sheet. Anyone of you nerds know HeroForge or some other character generator options.

  Rather than having a clumsy PDF full of drop downs and boxes option to define the class, statistics, etc., I'd rather have a unique series of pop ups ask you questions and then complete a most basic PDF form.

  Hello! With your help, tutorials and my brother, I thought about it.

  I created a variable called "subchoice" and assign the value null definition oDlg inside. After that I set up a validation action to store data of the dialog under another just called variable 'data '. Given then made reference to any choice of radio (called by an item_id exactly 4 characters). He uses those to then define subchoice string. This string (in this case, 'YourChoice') is then passed my script calcuation. This script is defined as a function of level document.

  var oDlg = {}

  subchoice:

  validation: {function (dialog)}

  data var = dialog.store ();

  If (data ['sub1'] & data ["sub4"]) {}

  This.subchoice = 'YourChoice' ;}

  },

  {Description: {INSERT YOUR DIALOGUE DESCRIPTION HERE}};

  activate the dialog box and initiate the calculation if OK is hit

  If ('ok' == app.execDialog (oDlg)) {}

  CalculationScript (oDlg.subchoice) ;}

• Why can't I just show the value of the reference variable on name full column

  Hello everyone,

  I want to display the value of the reference variable as column name for one of my analysis on OBIEE. However, when I write, it does not show the value, it shows just as text;

  VALUEOF ("rv_yesterday")

  How can I show the value of it?

  Can you help me please.

  Kind regards

  Dilek

  Raja,

  What is a date or a related data type in any variable of RPD - session or repository - will become a datetime. That's a given and you can play as much as you want with to_date, trunc, DATE (the way of the RPD), but will it be a datetime value. Period.

  Only when she is cast to a string rather than one of the 'date' data types can get rid of the component "hour".

  Edit: Sorry, I forgot to add: < dilek,="" that="" response="" is="" your="" answer="" as="" well,="" sorry.="" no="" "date="" without="" time="" component="" in="" proper="" data="" types."=""> >

• In the column of table when the values are grater that maximum linear axis it does not show the bar

  Hi guys,.

  In the column of table when the values are grater than there maximum linear axis it does not show the Bar.But I want to display the bar up to the maximum limit of the axis is linear without changing the limit max.

  Consider following the example:

  The values are 80 90 200 300

  and here is the result:

  Left: when I don't put maximum property of linear axis.

  Right: when I put in maximum property of linear axis to 200.

  

  Law 4th bar is not visible because the value of this bar is 300 which is excedding maxium. But I want the 4th bar to appear identical to 3 bar.

  How can I do this?

  Thanks in advance.

  Then you should change the value of Y to the maximum value.

  Another option, you should consider is changing the Render item column to reflect that the value is greater than the specified maximum value.

• DESC, showing the different type of data value via dblink

  Hi friends,

  We have two databases and for two of them, the configuration is as below

  Version of the operating system: Solaris 5.10

  DB version: 10.1.0.4

  For security reasons, I'm going by names of junk. Assume the names of database DB1 and DB2.

  We have a table T1 S1 schema of database DB1. to extract data from this table in DB2 in schema S2, we created a database DB1 and DB2 (lets say the name of dblink is XYZ)

  In DB1, in table T1, we have a column by name SYS_CREATED and its data type is varchar2(40 char).

  After you create the database link, below we have the table as desc

  DESC S1. T1@XYZ

  When we describe this statement, instead of showing the value of data type of column SYS_CREATED as varchar2(40 char), it's showing as varchar2(160 Char).

  Then, we created a table in DB2 under schema S2 as below

  SQL > create table S2. T2 in select * from S1. T1@XYZ;

  and now, when we describe the table T2, its original display value is varchar2 (40 Char).

  Then just when we described, it shows a higher value for the data type and when we create the table, his watch even than the original. In addition, what is happening to only varchar2 datatype. other data types such as number or tank remain same even when we describe.

  one thing is, when he demonstrated a different value using describe, sound exactly multiplying by 4 times. for example, if we have varchar2 (1000 char), the varchar2 (4000 tank) showing

  I would like to know if anyone in this strange situation earlier, if so, what is the reason?

  Thank you very much in advance

  > Unlike when you access a local object, the SELECT privilege is required to access a remote object because the database has no distance describe ability. The database must be a SELECT * on the remote object to determine its structure.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/ds_concepts002.htm

  What happens if you give the right to select on the remote object.

  Concerning

  Girish Sharma

• Hide the values in a column?

  Hi, I have this requirement to hide all values in a column and but not the Total of this column in the PivotTable.
  
  When I try to hide the values, he hides the Grand Total too... I need to show.
  Help, please.
  
  I use CSS Style - display: none for this particular column in PivotTable.

  Sigma sigin on PivotTable-> Format values-> text-decoration: none;
  For the column using the style css: color:rgb (242,245,249); or use display: none;

  Appreciate if you mark as correct

• Insert the value of a column in the report in a page with JavaScript element - 2?

  Hi guys,.
  
  As explained here:
  http://jholoman.WordPress.com/2012/02/26/Apex-4-1-page-items-to-submit/
  
  We have two reports, sources of the region including:
  
  Select * from dept
  and
  Select * from emp where deptno =: p1_deptno
  
  IN report of the departments link attributes, we use this script to set the value of the point P1_deptno

  onclick = "$s ('P1_DEPTNO', #DEPTNO #); return false; "

  In the report used region, on the article Page to submit, we put: P1_DEPTNO
  
  Then, we use a dynamic action to refresh the report used (she should get updated when the value of P1_deptno). where it is supposed to show the employees of a specific Department:
  
  But I have failed to do... You can pls, take a look:
  
  http://theexecutivetowers.info:8282 / apex
  workspace: opener
  user: fat
  PWD: fat
  
  Kind regards
  

  I use apex 4.1 on win 2008 Server. listener 1.1.3 deployed on glassfish 3.1

  I do not have your pencil link to work. This column did not assess the value of the #DEPARTMENT_NAME column.
  Who estimated that:
  OnClick = "$s ('P1_DEPARTMENT_ID', #DEPARTMENT_ID #); return false; »

  as opposed to
  OnClick = "$s ('P1_DEPARTMENT_ID', 10); return false; »

  I got your columns Dept ID name and dept to become links by their implementation. You can see what I did there. I defined a function in the page header.

  You also had a typing mistake in your SQL for employees (p1_dempartment_id) so I've corrected it to p1_department_id.

  All together.

• ADF LOV-&gt; UI: main table showing the fields ID and not the search values

  Hello
  I am very new to the development of the ADF and will have a simple question that I can't solve.
  
  Using Oracle JDeveloper 11.1.2.0.0 I create my views and objects of entity without incident. I have an entity object that has several "search values" (these are all optional references to foreign keys to tables 'children'). Objects and relations are perfectly mapped the ADF.
  
  In the views of child object I created the list UI tips
  -Type: Combo box with list values
  -the "selected" column is the "description" of the research
  
  in the editable display object, I traced the fields 'id' to use the predefined LOVs.
  
  This works as expected in the user interface, I created with an ADF table can be updated.
  
  However (here's the noob question), the "id" is displayed in the search on the table column. When I click the menu drop-down I can see the description, etc, but for a professional user when they look at the table, they see an unfriendly identification number.
  
  How can I get the part of the LOV display to show the description, while remaining linked to the ID of the parent entity.
  
  for example, it shows

  Country             LOV1        LOV2     LOV3
  United States     15           18           2

  while I want to display:

  Country             LOV1            LOV2       LOV3
  United States     Washington  Seattle     Rain

  If this has been answered several times or walk through there, sorry for the redundant question, I simply can't find a solution!

  Hello

  There are several ways to do this, you simply need an additional outputText next to the lov component field to display the value of the description.

  If you search the forum or adf blocks, you'll find several implementations.

  And here's one: http://andrejusb.blogspot.com/2010/06/lov-description-text-with-groovy.html

  Gabriel.

• Add column if the value in another column

  How can I add a column as column name 'YES_OR_NO.
  
  SELECT VALUE_ID IN THE TABLE TABLE_NAME
  
  VALUE_ID
  ---
  1
  2
  3
  4
  5
  
  Now, I want to create another column in the sql query called YES_OR_NO and that if there is a value in VALUE_ID then column YES_OR_NO must say 'YES' if there is no value in the column VALUE_ID of this line YES_OR_NO must say 'NO '.
  
  or just a way for her also to work would be to show this new column or not if a value in another column of table_name_2 (this would be ideal)
  If new column yes_or_no and fill by a Yes or a no if a value is found in another table

  Assuming that you are on a version that supports the CASE expression:

  SELECT VALUE_ID
        , case when VALUE_ID is null then 'NO' else 'YES' end as YES_NO
  FROM TABLE_NAME
  

• To show multiple values in the report?

  Hi all
  
  I have to show the value of prompt in demand from a prompt of dashboard.
  
  If the type drop-down list command prompt, a single value, I can use variable presentation.
  
  But I have a problem when multiple selection prompt property...
  
  How to display selected prompt in the report header values?
  
  Thank you

  Impossible to display the different values in a report header, but here is a workaround to display the selected values.

  (1) create a report smaill with just a single column, the column that is used in the multiple selection prompt.

  (2) put a filter on this "is invited" to receive the values selected from the prompt.

  (3) to customize the header and enter, "selected to request values.

  (4) place this report on the regular report.

  Now, when the user selects values, the list of values will appear at the top of your report.