Shows field on the form, print only the content

Similar Questions

• Version 5.0 on a MAC doesn't let me switch between tabs. Can I open a new tab, but when I try to go in a different tab, it shows me just the content of the tab opened most recently. Help!

  Version 5.0 on a MAC doesn't let me switch between tabs. Can I open a new tab, but when I try to go in a different tab, it shows me just the content of the tab opened most recently. Help!

  In addition, pop up blocker works for a while and then stops working. I have to close and restart Firefox to make it work again. Help!

  I had the same problem, but with Firefox 4.0. My first thought was last updated to Firefox (after of course restarting FF), but it did not help and I had the same problem.

  Among others, I had an extension installed and enabled called tile tabs 4.10 I thought could easily create this problem. I went in my Add-ons Manager and disabled, restarted Firefox and tabs worked properly again. Unfortunately, the extension of the tile tabs is my favorite Firefox Add-on and I use it almost every day to manage my web tasks. I went to the page Add on for tile tabs and saw that there was a notice that version 4.10 did not work properly on Mac OS and install version 4.9 of the extension. I saw that they had a new is not-yet-seen version 4.11 who has tackled the problem of Mac OS, installed, and everything seems to work properly.

  I have no idea why all of a sudden I had this problem as I don't had not updated Firefox or the extension of the tile tabs recently. Also, obviously this could not solve your problem, especially if you have the module installed and active. But our problem started at the same time for both of us it seems based on your post time, so its probably not a coincidence.

  But its worth a quick glance and you can check other extensions if you don't have the legs of tile that might be the cause of the problem.

• When I receive a message with an attached large xml file, I have to wait long until Thunderbird shows and displays the contents of the file. How to avoid this problem.

  Attachments such as Word or Excel files are shown only as attachments in a bar at the bottom of the message entering without rendering of such content. But Thunderbird always try to read the contents of an xml file in order to show ALL he's happy. If the file is large, it takes a lot of time, so the Thunderbirds crashes usually on, so I have to restart.

  I would like to be able to make some adjustments to prevent display of the contents of the xml files attached in incoming messages. Thank you.

  View (alt + V) menu > display the inline attachment

• My computer screen only shows half of the content page.

  When you try to play games online, I can only see half of the page.

  Hi chrissy2u42,

  1. this happens with a particular game or all games online?

  2. were you able to play the game before with no problems?

  3. you remember to make changes to the computer before this problem?

  Step 1:

  You can try to change the resolution of the screen and check to see if it helps:

  Change the screen resolution

  Step 2:

  You can also try to update the display drivers and check if it helps:

  Check out the link:

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Text showing fields not when formed open after masked

  I developed an interactive form that prompts the user to provide an explanation if certain boxes are checked. For example, if a user gets "A", a text box (which is by default hidden) appears asking the user to explain their problem with "A". When the form is saved and sent by electronic mail, 'A' is checked, but the text box is hiddden. The user is held to uncheck and then recheck the check box to display the text. I don't want hidden text boxes to display in the original form, since there is no reason to have dedicated the empty space if the user has no concern to describe.

  How hidden text fields can show a saved form which is now reopened? (I wrote the code that says "hidden if it is disabled but visible if enabled.") Since the box is checked when opened after a backup, it should open with the display of text field.)

  Thanks in advance!

  Or... are a quick glance at the form of file/properties/Defaultsand make sure you that the button that sets the 'preserve Scripting of form when save changes' is set on automatically.

  Paul

• Hide the caption only when the content of the field is empty for an Adobe form field

  Hi all

  We try to hide only the caption of a field if the content of the field is empty.

  (a) the following code allows you to hide all cru (the entire field including the legend). What we should change the code to hide the legend?

  -------------------------------------------------------

  If (this.) RawValue is nothing)

  {

  This.Presence = "hidden".

  }

  -------------------------------------------------------

  (b) another option would be to use the conditional formatting-> change of text in the caption to the text color white, if the content of the field is empty to make it invisible on print.

  Are there options available ALD or code that must be used to achieve one of the options above?

  Thank you in advance!

  Kind regards

  Roy

  Modify the script to:

  If (this.) RawValue is nothing)

  {

  xfa.resolveNode("this.caption.value.#text").value = "";

  }

• PDF form javascript to read only field using the button

  Please let me know the PDF form JavaScript to make the selected fields (text field, dropdown list, etc.) read-only button.

  Do you want your button to read-only?

  Let's start with Acrobat JS Reference.

  do all the fields in a form read-only;

  var oField; variable field processing;

  Browse the form fields;

  for (var i = 0; i)< this.numfields;="" i++)="">

  treat each domain name;

  oField = this.getField (this.getNthFieldName (i)) .readonly = true;

  }

• Hide and unhide the field in a form according to the conditions

  Hello Experts,
  
  Is it possible to hide and show fields in a form according to requirements based on an LOV?
  
  Thank you

  Hey Kevin,

  You can use javascript to capture all changes to the LOV.

  Put this in a header or some other place where you can put html attributes:
  

  then, you need the name of the field that you want to hide. That is to say mine is

  div href = "#" id = "f09" style = "" display: none; ">"
  
  (there is a ' ")<" missing,="" else="" it="" cannot="" be="" shown="/">

  Then you put a javascript function in the header as follows:

  function body_on()
  {
  body var = document.getElementById ('P41_body');
  Body.style.Display = 'block ';
  var head = document.getElementById ('head_image');
  Head.SRC = "#IMAGE_PREFIX#themes/theme_20/collapse_minus.gif";
  }

  function body_off()
  {
  body var = document.getElementById ('P41_body');
  Body.style.display = 'none ';
  var head = document.getElementById ('head_image');
  Head.SRC = "#IMAGE_PREFIX#themes/theme_20/collapse_plus.gif";
  }

  It's to hide / show regions of course.

  Kind regards
  jR

  Published by: jR - ora on 05.01.2010 01:22

• Try to retrieve the contents of a text field and use it in a conditional statement

  Hello world

  I have a form with a text field and a button. The text field is called "orderNo" and the button is called "genOrder".

  Initially, the text field is empty, and clicking on the button fills the text with an appropriate order number field.

  I have need to check the text field for the data (content) before you write the order number, in this way, if an order number is already present in the text field, it will be over written.

  My intention is to use an if / else structure to perform the tests, but I do not know how to retrieve the content of the text field (if the content is present!).

  If anyone can suggest how I can go about extracting the contents of a text field and then use it in an if / else statement it will be greatly appreciated.

  Kind regards

  DAVO

  currentOrderNo = this.getField("orderNo").value;

  If ("currentOrderNo == null | currentOrderNo ==" ") {}

  the field is empty, fill it with a new value

  } else {}

  the field is not empty, something else

  }

• Hide the drop-down list when you print only when "PLEASE SELECT" is selected (unused field).

  Our form has several drop-down lists that by default the option "Choose", and not all of them are used whenever the form is used.  When we print a copy of each document, we would like the (unused) field "Choose" to disappear when printing - to make a copy of paper filter.  Is there a script for this?  I tried to use only the general framework ' Visible but does not print ", but of course, the field prints any - we need to print only when there was one another option as the default"Select"is selected.  Thanks in advance for your help.

  Coleen

  You can use a custom validation script, something like:

  Event.Target.Display = event.value = "choose"? display.noPrint: display.visible;

  To put this into effect, you will need to make a different choice and place it back to "choose." Another option would be to place as a custom Format script.

• How can I create a form to fill out on-line a scaned PDF and then print only the typed on the original form of pre-printed Virgin.

  I have a blank form that I saved as a pdf form. I would like to make the pdf fillable form and then be able to load the blank forms into the printer and print only the text you type into the fields. And save the completed form for files remain without paper. Any way that I can do?

  If you print from Acrobat, then you can choose to print only the fields of the form 'Comments & forms' menuent in the dialog box print.

• How can I print only 1 page web/29 FF? With 29, you can change only the first field (1 of 5, 2 of 5, 3, 5, etc.) This means I can print only 5 pages,

  So I can not print just 1 of 5 pages. The default, 1-5, will display all 5 pages. The 2nd field cannot be changed, possible in previous versions of FF, 1 of 1. Therefore, I can print only all 5 pages, 2-5, 3-5, etc. WTF - I keep losing the print paper. I had printing edit add-on, but that doesn't seem to help. I've been through several versions of FF and do not like the format of 29.

  In fact, with the addon print change, if I click on the arrow down I get old print format options and can do.

• How do another field the value of a field in a form? As my image shows.

  Mr President.

  How do another field the value of a field in a form? As my image shows.

  I want that when a user enters the value credit then it also presents credit () 1.

  As below

  

  concerning

  public void setCredit(String value) {
          setAttributeInternal(CREDIT, value);
    setCredit1(value);
  }
  

  Define autosubmit = true for the first column of credit.

  See you soon

  AJ

• I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  Mr President.

  I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  

  the page source is

  <?xml version='1.0' encoding='UTF-8'?>
  <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                  xmlns:f="http://java.sun.com/jsf/core">
    <af:panelFormLayout id="pfl1">
      <af:group id="Group">
        <af:inputText value="#{bindings.VoucherId.inputValue}" label="#{bindings.VoucherId.hints.label}"
                      required="#{bindings.VoucherId.hints.mandatory}" columns="#{bindings.VoucherId.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId.hints.precision}"
                      shortDesc="#{bindings.VoucherId.hints.tooltip}" id="it1">
          <f:validator binding="#{bindings.VoucherId.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId.format}"/>
        </af:inputText>
        <af:inputDate value="#{bindings.VoucherDate.inputValue}" label="#{bindings.VoucherDate.hints.label}"
                      required="#{bindings.VoucherDate.hints.mandatory}"
                      columns="#{bindings.VoucherDate.hints.displayWidth}"
                      shortDesc="#{bindings.VoucherDate.hints.tooltip}" id="id1">
          <f:validator binding="#{bindings.VoucherDate.validator}"/>
          <af:convertDateTime pattern="#{bindings.VoucherDate.format}"/>
        </af:inputDate>
        <af:inputText value="#{bindings.Credit.inputValue}" label="#{bindings.Credit.hints.label}"
                      required="#{bindings.Credit.hints.mandatory}" columns="#{bindings.Credit.hints.displayWidth}"
                      maximumLength="#{bindings.Credit.hints.precision}" shortDesc="#{bindings.Credit.hints.tooltip}"
                      id="it2">
          <f:validator binding="#{bindings.Credit.validator}"/>
        </af:inputText>
      </af:group>
      <af:group id="g1">
        <af:inputText value="#{bindings.Lineitem.inputValue}" label="#{bindings.Lineitem.hints.label}"
                      required="#{bindings.Lineitem.hints.mandatory}" columns="#{bindings.Lineitem.hints.displayWidth}"
                      maximumLength="#{bindings.Lineitem.hints.precision}" shortDesc="#{bindings.Lineitem.hints.tooltip}"
                      id="it3">
          <f:validator binding="#{bindings.Lineitem.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Lineitem.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.VoucherId1.inputValue}" label="#{bindings.VoucherId1.hints.label}"
                      required="#{bindings.VoucherId1.hints.mandatory}"
                      columns="#{bindings.VoucherId1.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId1.hints.precision}"
                      shortDesc="#{bindings.VoucherId1.hints.tooltip}" id="it4">
          <f:validator binding="#{bindings.VoucherId1.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId1.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Debit.inputValue}" label="#{bindings.Debit.hints.label}"
                      required="#{bindings.Debit.hints.mandatory}" columns="#{bindings.Debit.hints.displayWidth}"
                      maximumLength="#{bindings.Debit.hints.precision}" shortDesc="#{bindings.Debit.hints.tooltip}"
                      id="it5">
          <f:validator binding="#{bindings.Debit.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Credit1.inputValue}" label="#{bindings.Credit1.hints.label}"
                      required="#{bindings.Credit1.hints.mandatory}" columns="#{bindings.Credit1.hints.displayWidth}"
                      maximumLength="#{bindings.Credit1.hints.precision}" shortDesc="#{bindings.Credit1.hints.tooltip}"
                      id="it6">
          <f:validator binding="#{bindings.Credit1.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Particulars.inputValue}" label="#{bindings.Particulars.hints.label}"
                      required="#{bindings.Particulars.hints.mandatory}"
                      columns="#{bindings.Particulars.hints.displayWidth}"
                      maximumLength="#{bindings.Particulars.hints.precision}"
                      shortDesc="#{bindings.Particulars.hints.tooltip}" id="it7">
          <f:validator binding="#{bindings.Particulars.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Amount.inputValue}" label="#{bindings.Amount.hints.label}"
                      required="#{bindings.Amount.hints.mandatory}" columns="#{bindings.Amount.hints.displayWidth}"
                      maximumLength="#{bindings.Amount.hints.precision}" shortDesc="#{bindings.Amount.hints.tooltip}"
                      id="it8">
          <f:validator binding="#{bindings.Amount.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Amount.format}"/>
        </af:inputText>
      </af:group>
      <f:facet name="footer">
        <af:button text="Submit" id="b1"/>
        <af:button actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"
                   disabled="#{!bindings.CreateInsert.enabled}" id="b2"/>     
        <af:button actionListener="#{bindings.Commit.execute}" text="Commit" disabled="#{!bindings.Commit.enabled}"
                   id="b3"/>
        <af:button actionListener="#{bindings.Rollback.execute}" text="Rollback" disabled="#{!bindings.Rollback.enabled}"
                   immediate="true" id="b4">
          <af:resetActionListener/>
        </af:button>
      </f:facet>
    </af:panelFormLayout>
  </ui:composition>
  
  
  
  

  Concerning

  Go to your VO Wizard, select the tab of the entity and to check if both the EO is editable or not.

  See you soon

  AJ

• On the forms send us and receive in return, data in the form of fields will be not print.  We can view the data, but the fields to print Virgin.  How can I fix it?

  On the forms send us and receive in return, data in the form of fields will be not print.  We can view the data, but the fields to print Virgin.  How can I fix it?

  OK, it's different. These text boxes are (at least engineering point of view) not considered form data, they are annotations (or markup). On your print dialogue box, you will see a group of "Comments & Form". Make sure that the first control is set to "Document and annotations:

  

  After this change, you should see the markup of your impressions.