shows low memorey
I have 4th Gen processoer and 6 GB ram i5
but I play the game after sometimes he show little mΘmoire
Please help me this problem and tell me what I need to do?
Hello again Himanshu1,
Thank you for responding to my message asking for additional information. We need to determine what takes up all your memory on your computer. I provided you a link to a Microsoft v16.02 Process Explorertool, I would like to that you can download and run.
Then, in the, click information system Process Explorer' or
Please re-post with the results of these measures so we can treat the hungry application that you seem to have in memory. Thanks for posting on the HP Forums. Have a great day!
Tags: HP Desktops
Similar Questions
-
Hi, my c drive shows low disk space, so I searched for the program that holds more memory on the c drive. I came to know that pagefile.sys has 3 GB in the c drive, kindly guide me to move the pagefile.sys to another drive.
Hi jafrin.michel,
Thanks for posting in the Microsoft community.
Before you start the troubleshooting steps, I need the information required.
What version of the windows operating system do you use?
Method 1:
If you are using windows 7, I suggest to perform a disk cleanup and verify.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
Method 2:
If you want to move the pagefile.sys to another drive, follow the steps and check out them.
Follow these steps to move the pagefile.sys to C: drive on D: drive (if you have the drive D :).
1, write click on my computer and select Properties.
2, click on the Advanced tab.
3, click settings under performance menu.
4, click on the Advanced tab and click on change.
5, select letter (C :) and "BOLD" No pagefile then click on Set. )
6, if you want to configure pagefile.sys in, select drive D: drive letter D: and "BOLD" in the custom size or the size of the system managed , then click on Set. It displays a pop-up message click OK.
7, again click apply and OK OK.
8, the system you will be asked to reboot, click on Yes.
9, after rebooting the system, you can see the pagefile.sys will be moved to D:
-
Ink level still shows low after replacing the cartridge in OfficeJet Pro L7680
88XL black cartridge replaced, still shows low ink but prints out OK.
Travis_C wrote:
Hello pikespeakbob
Did you use XL cartridges in your printer before? According to this article it may simply not be read correctly. I had read the article below, even if that shows a different number of ink.
My bad!
At first I thought it might be the 'electronic device' on the cartridge that was at fault but when I rechecked it against the cartridge I replaced it smelled a bit of light. I weighed both cartridges on a postal scale and they weighed the oz in 1.9. It turns out that it was also a used cartridge should I have placed in a container cardboard new cartridge so I thought it was new. I even found the date that I had written on the cartridge when I initially installed, should have looked more closely. Detective Conan.
Thanks for the reply.
-
Even if I put new ink cartridges in the windo continues to show low ink I can do to fix this?
How can I change the view of low ink even though I put new cartridges in?
Hello
What is brand and model printer?
Method 1: Run the fixit
Diagnose and automatically fix the problems of the printer and printing http://support.microsoft.com/mats/printing_problems/.
Method 2:
See the following Microsoft article:
Resources for the resolution of the printer in Windows XP problems
http://support.microsoft.com/kb/308028.
Method 3: Update the drivers
a. click Start, click runand type devmgmt.msc and press enter
b. right click on the device driver you want to update
c. click put to update driver and follow the instructions in the wizard.
If the problem persists I suggest you please contact the manufacturer.
-
I created a site of apex with a standard tabset. It can hold about 14 individual tabs in this tabset.
Some of my end-users could use low resolution monitors like size 19 "and that they did not see the 2 tabs completely. There is no horizontal scroll bar that appears so that they could scroll to the end of the page.I don't have a 19 "monitor in my dev environment. I just reduced the size of screen resolution in my dev box at 1440 x 900 and could see the question.
I created a sample application with 14 tabs here just to reproduce the problem.
http://Apex.Oracle.com/pls/Apex/f?p=13567
U:testuser
P:testPlease reduce your screen resolution to see what I mean. (1440 x 900, which is a resolution of monitor 19 "inches..?)
Ideas or workarounds.
Hi Joseph,.
One thing you can do is to change the css of the tabs so that they have less filling:
[code]
UL li a.tab_link {} #tabs
padding: 0 12px;
}
[/ code]
Current padding is 20px above will change to 12px, but you will have unused space at the end of your tabs on large resolutions, you will need to add the css to your template or page 0 it is used throughout the application. This would address it on a screen 1440 but my suggestion would be to explore using lists, because they give you more flexibility and choice as the tabs.
You will just need to create a list that reflects your tabs and as a starting point, I could choose the Center tab set as a list template and see how it looks like. You can always add some css to improve style.
Thank you
Paul
-
LUN showing sufficient free space but VMware showing low on space!
Hello
I have a very strange problem on a loan SAN, I don't have on hand the model number for the moment, but it's a PS6000 with NL - SAS drives.
When I look in VMware to the DRLUN01 it seems that there is only 149 GB of free. When I look at the same SAN logical unit number, he says he has 985 GB free!
The SAN is running the latest firmware and is connected to a server ESXi 4.1.0 through iSCSI. The LUN contains replicas of Veeam my production systems. When I talked to Veeam they notify that they have seen this twice but only know that Dell has solved the problems.
As I'm not offered no support, even if I'm likely to spend August 20 k with Dell and have the Support Pro on my production SAN, I was wondering if someone can get ideas?
Thank you
Greg
If you have allocated (from the point of view ESX) all your space so it is a different matter. ESX needs free space to work properly. Temp files, the swapfiles, newspapers and snapshots of VMware. For example, I usually create volumes of 600GO (in general), I leave at least 100 GB free. If that gets close, I create a new data store and move the virtual machines or simply create the new on the new data store.
Re: ESX knows. Basics of basic/SCSI disk. At the level of the storage disk, there is no "files" there are only blocks. Each block has an address, called a LBA, logical block addressing. Each volume (disk) reports so that its ability to the controller.
The volume (disk) starts at LBA 0 and goes to the LBA
The ESX server keeps a table of total blocks and when you make an entry, it selects and for use LBA. LBA (and data) are written in the volume (disk). The table knows also how each volume is great, so he knows how many blocks there. ESX server sends that data with the LBA ESX choose to use, at the same time, it will update the allocation table which is on this VMFS volume... The table can then locate LBA (X) and write the data here.
So, since you gave us (X) MB, we can infer that from the free space of the total volume. Works fine as long as you never delete anything. A removal of ESX is a WRITING on the VMFS allocation table. We record this writing as others. There is nothing to say the array, AMLA (X) is no longer used, so return to the Member's area. This is where the new command comes in cancel the MAPPING. Now the server can send a command that tells unallocate (free) LBA (X). Use space will go down and free space on this member will go up.
Re: Re-use of Array. So since it's the ESX Server that determines the LBA to use, it will be re - write down as needed.
Re: Free to the declaration space. # Important indicator is what the operating system said, not the table. Finally when SCSI UNMAP is indeed those two will be much closer together. If a VMFS volume goes to 100%, you're in trouble. ESX will no longer be a LBA list to choose from. Entries will fail and VMs will go down.
The table in use is assistance to make sure that you attach no more space than you did.
That is if you had a table of 2 TB, you can create a volume thin MUCH bigger than available. But up to what you actually write more than 2 TB, of a data value, you're fine. If you do, then the table runs out of space and volumes to disconnect and all virtual machines would stop. This gauge to judge when to buy more storage.
If w/o UNMAP, finally the EQL GUI does NOT reflect the free space for a volume.
Bottom line, follow what ESX (or any server) said being used and free space on a volume.
Best?
-
Creative cloud installs but apps show low load error?
Try to install on a second Computor
Hello
I think that you have found the "download error" in the Apps Panel.
Please check the help below document:
Download error in the applications tab of Creative Cloud Desktop Application
You can also view the threads below:
https://forums.Adobe.com/thread/1832357
Persistent Cloud error - error download - creative
Re: Creative Cloud "Download error" message
Kind regards
Sheena
-
Shows low cost, but updates in 10 Minutes
Hi all
Here's the updated query, we are running.
The update takes 10 minutes.update ayr_line_snapshot t1 set mtd_balance = nvl(closing_balance,0) - nvl((select nvl(MAX(t2.opening_balance) KEEP(DENSE_RANK FIRST ORDER BY BATCH_DATE),0) from ayr_line_snapshot t2 where t2.batch_date >= trunc(to_date('110709','ddmmyy'),'mm') and t2.legal_entity = t1.legal_entity and t2.natural_account = t1.natural_account),0) where batch_date = to_date('110709','ddmmyy'); --Expalin Planis as shown below PLAN_TABLE_OUTPUT ---------------------------------------------------------------------------------------------------------------------------- -------------------- Plan hash value: 3733491439 ----------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ----------------------------------------------------------------------------------------------------------- | 0 | UPDATE STATEMENT | | 3867 | 98K| 52 (0)| 00:00:01 | | 1 | UPDATE | AYR_LINE_SNAPSHOT | | | | | | 2 | TABLE ACCESS BY INDEX ROWID | AYR_LINE_SNAPSHOT | 3867 | 98K| 52 (0)| 00:00:01 | |* 3 | INDEX RANGE SCAN | AYR_LINE_SNAP_DT_NDX | 3867 | | 15 (0)| 00:00:01 | | 4 | SORT AGGREGATE | | 1 | 23 | | | |* 5 | TABLE ACCESS BY INDEX ROWID | AYR_LINE_SNAPSHOT | 1 | 23 | 668 (3)| 00:00:09 | | 6 | BITMAP CONVERSION TO ROWIDS | | | | | | | 7 | BITMAP AND | | | | | | | 8 | BITMAP CONVERSION FROM ROWIDS| | | | | | |* 9 | INDEX RANGE SCAN | AYR_LS_NA_NDX | 69600 | | 6 (0)| 00:00:01 | | 10 | BITMAP CONVERSION FROM ROWIDS| | | | | | |* 11 | INDEX RANGE SCAN | AYR_LS_LE_NDX | 69600 | | 583 (2)| 00:00:07 | ----------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 3 - access("BATCH_DATE"=TO_DATE('110709','ddmmyy')) 5 - filter("T2"."LEGAL_ENTITY"=:B1 AND "T2"."BATCH_DATE">=TRUNC(TO_DATE('110709','ddmmyy'),'fmmm ')) 9 - access("T2"."NATURAL_ACCOUNT"=:B1) 11 - access(SUBSTR("LEGAL_ENTITY",1,2)=SUBSTR(:B1,1,2)) 27 rows selected. SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod PL/SQL Release 10.2.0.4.0 - Production CORE 10.2.0.4.0 Production TNS for 32-bit Windows: Version 10.2.0.4.0 - Production NLSRTL Version 10.2.0.4.0 - Production
The AYR_LINE_SNAPSHOT table contains almost 750 000 records. Each batch_date (from Jan01-2009) will have an almost equal number of lines. The table is analyzed using the ANALYZE TABLE command before you run the update query.
Thanks in advance for your valuable suggestions.
JacHi JAC,
You are running from the subquery t2 once for each line of ayr_line_snapshot with batch_date = to_date('110709','ddmmyy').
This is potentially a large number of queries. You can reduce the number to one by opting for the merge statement.
In this case, you scan the ayr_line_snapshot twice for the query and once to perform the update.
Here is an example:SQL> create table ayr_line_snapshot 2 ( mtd_balance 3 , opening_balance 4 , closing_balance 5 , batch_date 6 , legal_entity 7 , natural_account 8 ) 9 as 10 select cast(null as number(38)), 1, 2, date '2009-06-01', 1, 1 from dual union all 11 select null, 2, 3, date '2009-06-30', 1, 1 from dual union all 12 select null, 3, 4, date '2009-07-01', 1, 1 from dual union all 13 select null, 4, 5, date '2009-07-11', 1, 1 from dual union all 14 select null, 5, 6, date '2009-07-20', 1, 1 from dual union all 15 select null, 10, 11, date '2009-06-30', 2, 2 from dual union all 16 select null, 11, 12, date '2009-07-01', 2, 2 from dual union all 17 select null, 12, 13, date '2009-07-02', 2, 2 from dual union all 18 select null, 13, 14, date '2009-07-03', 2, 2 from dual union all 19 select null, 14, 15, date '2009-07-04', 2, 2 from dual union all 20 select null, 15, 16, date '2009-07-05', 2, 2 from dual union all 21 select null, 16, 17, date '2009-07-06', 2, 2 from dual union all 22 select null, 17, 18, date '2009-07-07', 2, 2 from dual union all 23 select null, 18, 19, date '2009-07-08', 2, 2 from dual union all 24 select null, 19, 20, date '2009-07-09', 2, 2 from dual union all 25 select null, 20, 21, date '2009-07-10', 2, 2 from dual union all 26 select null, 21, 22, date '2009-07-11', 2, 2 from dual union all 27 select null, 22, 23, date '2009-07-12', 2, 2 from dual 28 / Tabel is aangemaakt. SQL> create index ayr_line_snap_dt_ndx on ayr_line_snapshot(batch_date) 2 / Index is aangemaakt. SQL> exec dbms_stats.gather_table_stats(user,'ayr_line_snapshot',cascade=>true) PL/SQL-procedure is geslaagd. SQL> set serveroutput off SQL> update /*+ gather_plan_statistics */ 2 ayr_line_snapshot t1 3 set mtd_balance = nvl(closing_balance,0) - 4 nvl 5 ( ( select nvl(MAX(t2.opening_balance) KEEP(DENSE_RANK FIRST ORDER BY BATCH_DATE),0) 6 from ayr_line_snapshot t2 7 where t2.batch_date >= trunc(to_date('110709','ddmmyy'),'mm') 8 and t2.legal_entity = t1.legal_entity 9 and t2.natural_account = t1.natural_account 10 ) 11 , 0 12 ) 13 where batch_date = to_date('110709','ddmmyy') 14 / 2 rijen zijn bijgewerkt. SQL> select * from table(dbms_xplan.display_cursor(null,null,'allstats last')) 2 / PLAN_TABLE_OUTPUT -------------------------------------------------------------------------------------------------------------------------------------- SQL_ID g7cuu9jw4hm5h, child number 0 ------------------------------------- update /*+ gather_plan_statistics */ ayr_line_snapshot t1 set mtd_balance = nvl(closing_balance,0) - nvl ( ( select nvl(MAX(t2.opening_balance) KEEP(DENSE_RANK FIRST ORDER BY BATCH_DATE),0) from ayr_line_snapshot t2 where t2.batch_date >= trunc(to_date('110709','ddmmyy'),'mm') and t2.legal_entity = t1.legal_entity and t2.natural_account = t1.natural_account ) , 0 ) where batch_date = to_date('110709','ddmmyy') Plan hash value: 3388926065 ---------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | ---------------------------------------------------------------------------------------------------------------- | 1 | UPDATE | AYR_LINE_SNAPSHOT | 1 | | 0 |00:00:00.01 | 9 | | 2 | TABLE ACCESS BY INDEX ROWID | AYR_LINE_SNAPSHOT | 1 | 1 | 2 |00:00:00.01 | 2 | |* 3 | INDEX RANGE SCAN | AYR_LINE_SNAP_DT_NDX | 1 | 1 | 2 |00:00:00.01 | 1 | | 4 | SORT AGGREGATE | | 2 | 1 | 2 |00:00:00.01 | 4 | |* 5 | TABLE ACCESS BY INDEX ROWID| AYR_LINE_SNAPSHOT | 2 | 2 | 15 |00:00:00.01 | 4 | |* 6 | INDEX RANGE SCAN | AYR_LINE_SNAP_DT_NDX | 2 | 8 | 30 |00:00:00.01 | 2 | ---------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 3 - access("BATCH_DATE"=TO_DATE('110709','ddmmyy')) 5 - filter(("T2"."LEGAL_ENTITY"=:B1 AND "T2"."NATURAL_ACCOUNT"=:B2)) 6 - access("T2"."BATCH_DATE">=TRUNC(TO_DATE('110709','ddmmyy'),'fmmm')) 29 rijen zijn geselecteerd. SQL> select * from ayr_line_snapshot 2 / MTD_BALANCE OPENING_BALANCE CLOSING_BALANCE BATCH_DATE LEGAL_ENTITY NATURAL_ACCOUNT ----------- --------------- --------------- ------------------- ------------ --------------- 1 2 01-06-2009 00:00:00 1 1 2 3 30-06-2009 00:00:00 1 1 3 4 01-07-2009 00:00:00 1 1 2 4 5 11-07-2009 00:00:00 1 1 5 6 20-07-2009 00:00:00 1 1 10 11 30-06-2009 00:00:00 2 2 11 12 01-07-2009 00:00:00 2 2 12 13 02-07-2009 00:00:00 2 2 13 14 03-07-2009 00:00:00 2 2 14 15 04-07-2009 00:00:00 2 2 15 16 05-07-2009 00:00:00 2 2 16 17 06-07-2009 00:00:00 2 2 17 18 07-07-2009 00:00:00 2 2 18 19 08-07-2009 00:00:00 2 2 19 20 09-07-2009 00:00:00 2 2 20 21 10-07-2009 00:00:00 2 2 11 21 22 11-07-2009 00:00:00 2 2 22 23 12-07-2009 00:00:00 2 2 18 rijen zijn geselecteerd. SQL> rollback 2 / Rollback is voltooid. SQL> merge /*+ gather_plan_statistics */ 2 into ayr_line_snapshot t1 3 using ( select nvl(max(t2.opening_balance) keep (dense_rank first order by batch_date),0) t2_bal 4 , t2.legal_entity 5 , t2.natural_account 6 from ayr_line_snapshot t2 7 where t2.batch_date >= trunc(to_date('110709','ddmmyy'),'mm') 8 group by t2.legal_entity 9 , t2.natural_account 10 ) t2 11 on ( t1.batch_date = to_date('110709','ddmmyy') 12 and t1.legal_entity = t2.legal_entity 13 and t1.natural_account = t2.natural_account 14 ) 15 when matched then 16 update set mtd_balance = nvl(closing_balance,0) - t2_bal 17 / 2 rijen zijn samengevoegd. SQL> select * from table(dbms_xplan.display_cursor(null,null,'allstats last')) 2 / PLAN_TABLE_OUTPUT -------------------------------------------------------------------------------------------------------------------------------------- SQL_ID 65dpgjsz0wfjm, child number 0 ------------------------------------- merge /*+ gather_plan_statistics */ into ayr_line_snapshot t1 using ( select nvl(max(t2.opening_balance) keep (dense_rank first order by batch_date),0) t2_bal , t2.legal_entity , t2.natural_account from ayr_line_snapshot t2 where t2.batch_date >= trunc(to_date('110709','ddmmyy'),'mm') group by t2.legal_entity , t2.natural_account ) t2 on ( t1.batch_date = to_date('110709','ddmmyy') and t1.legal_entity = t2.legal_entity and t1.natural_account = t2.natural_account ) when matched then update set mtd_balance = nvl(closing_balance,0) - t2_bal Plan hash value: 219012028 ----------------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem | ----------------------------------------------------------------------------------------------------------------------------------------------- | 1 | MERGE | AYR_LINE_SNAPSHOT | 1 | | 1 |00:00:00.01 | 8 | | | | | 2 | VIEW | | 1 | | 2 |00:00:00.01 | 5 | | | | |* 3 | TABLE ACCESS BY INDEX ROWID | AYR_LINE_SNAPSHOT | 1 | 1 | 2 |00:00:00.01 | 5 | | | | | 4 | NESTED LOOPS | | 1 | 1 | 7 |00:00:00.01 | 4 | | | | | 5 | VIEW | | 1 | 3 | 2 |00:00:00.01 | 2 | | | | | 6 | SORT GROUP BY | | 1 | 3 | 2 |00:00:00.01 | 2 | 73728 | 73728 | | | 7 | TABLE ACCESS BY INDEX ROWID| AYR_LINE_SNAPSHOT | 1 | 8 | 15 |00:00:00.01 | 2 | | | | |* 8 | INDEX RANGE SCAN | AYR_LINE_SNAP_DT_NDX | 1 | 8 | 15 |00:00:00.01 | 1 | | | | |* 9 | INDEX RANGE SCAN | AYR_LINE_SNAP_DT_NDX | 2 | 1 | 4 |00:00:00.01 | 2 | | | | ----------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 3 - filter(("T1"."LEGAL_ENTITY"="T2"."LEGAL_ENTITY" AND "T1"."NATURAL_ACCOUNT"="T2"."NATURAL_ACCOUNT")) 8 - access("T2"."BATCH_DATE">=TRUNC(TO_DATE('110709','ddmmyy'),'fmmm')) 9 - access("T1"."BATCH_DATE"=TO_DATE('110709','ddmmyy')) 31 rijen zijn geselecteerd. SQL> select * from ayr_line_snapshot 2 / MTD_BALANCE OPENING_BALANCE CLOSING_BALANCE BATCH_DATE LEGAL_ENTITY NATURAL_ACCOUNT ----------- --------------- --------------- ------------------- ------------ --------------- 1 2 01-06-2009 00:00:00 1 1 2 3 30-06-2009 00:00:00 1 1 3 4 01-07-2009 00:00:00 1 1 2 4 5 11-07-2009 00:00:00 1 1 5 6 20-07-2009 00:00:00 1 1 10 11 30-06-2009 00:00:00 2 2 11 12 01-07-2009 00:00:00 2 2 12 13 02-07-2009 00:00:00 2 2 13 14 03-07-2009 00:00:00 2 2 14 15 04-07-2009 00:00:00 2 2 15 16 05-07-2009 00:00:00 2 2 16 17 06-07-2009 00:00:00 2 2 17 18 07-07-2009 00:00:00 2 2 18 19 08-07-2009 00:00:00 2 2 19 20 09-07-2009 00:00:00 2 2 20 21 10-07-2009 00:00:00 2 2 11 21 22 11-07-2009 00:00:00 2 2 22 23 12-07-2009 00:00:00 2 2 18 rijen zijn geselecteerd.In this example, the gain in performance is perhaps not obvious, but if you look closely the foreground you see the number 30 A-lines in the last step.
It's 2 * 15. And if you have N lines with a batch_date of 07/11/2009, it becomes N * 15. That can add up quickly.I hope this helps.
Kind regards
Rob. -
40VL733G - new Firmware - always 'low signal intensity' is displayed
Model: G 40733
Firmware: 10.1.59.6Hello!
After installing the new Firmware the TV always shows 'low signal intensity', but the quality is good, nothing has changed.
What can I do?
Everyone has the older Firmware?You reset the TV after the update of the firmware?
In the contrary case thatResetting must be done always after the firmware has been updated.
-
gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches
When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.
It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...
Appreciate any help on this
Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support
-
15 - ac098tu: low Volume by Mic
Hello
I have a huge request concerning the low mic volume by realtek dts sound studio, I can see the mic properties shows low bars when I speak into the microphone through front or through portable computer microphone, but when I uninstall the driver from realtek dts sound studio, it works perfectly with the microphone and have good enough bars to the microphone volume.
But a little low volume on the speakers for sound.
When I connect wifi windows 10 it automatically update the sound driver realtek dts, I need help about mic low volume, so teach me how to stop updating the audio driver or get me the solution for a low microphone volume please.
Thanks and greetings
Hous
Hello @LeoManinder,
Thanks for the quick response!
I understand that you already exhausted the steps mentioned in the solution I provided in my previous post. Try the following steps to stop your system to automatically update the Audio driver:
- Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
- Change the Windows Update Services automatic (delayed start) parameter to the manual.
- In Control Panel, select administrative tools, and open Services.
- Go to Windows Update and double-click it to view its properties.
- Click on stop to stop the service to run.
- Change the Startup Type to manual, and then click OK.
- Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide for the Audio from Realtek driver updates. (This will block your system to automatically reinstall or showing updates the driver).
- Change back the setting of Windows Update Services to manual automatic (delayed start).
- Restart your computer.
Source: Re: how to solve the problems of Post-Windows 10 upgrade on HP laptops
I hope this helps.
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Kind regards!
-
HP LaserJet Pro 100 color MFP: print warning of low ink, cartridge black, but is still perfect
Hello people,
On the screen of the printer itself and on the computer, I received a warning of low ink in the black cartridge for many months. I have a black cartridge, but I am still able to print with no noticeable decline in quality.
Should she continue to print with the warning of low ink level can damage the printer or should I just wear until the print quality deteriorates?
Thank you in advance.
--
Tim
Here, the document says: "warnings level of Toner and indicators to provide estimates for planning only.» When an indicator shows low toner levels, consider having a cartridge replacement available to avoid possible printing delays. Print quality deteriorates as the print to run out of ink cartridges. »
You can continue printing until the print quality shows signs of deterioration before you need to change the cartrdige. Do not damage the printer.
-
BlackBerry Smartphones low memory with OS 6
OS 6 seems to use a much larger portion of the allocation of phone memory. With a modest set of applications and the removal of the games not used, etc. I have a basic level of about 40 MB, even if use. Daily use which rediced to 10-16 MB and less I get shows low memory and need to reboot to recover the memory available. The memory consumed is in the other category. This has never been a problem with the OS 5, which I think has a smaller BONE. Any content that I store is on the map.
Is there a way to allocate memory differently, to address your operational cache or buffer to the media card, or any other action to reconcile consumption or lack of memory available?
Your best bet is to look at the applications over time. Install an application will take the memory of the initial (42 MB, you said), because this initial memory is running and storage.
Some applications, but unfortunately not very many, allow you to configure the storage of application data. If you do, move the storage of application for storage of device (which is separate from the application memory) or a media card.
Good luck!
-
Warning of low power for AIR-LAP1242AG-C-K9
Hey Buddie,
We bought a few AIR-LAP1242AG-C-K9, but not perchasing no matter what wireless controller. When I connect the TOWER to the port of Cat2950 or Cat2960 TRP, all the TOUR cannot start normally. It shows low power, please consult the attached two images. But if I use the external power cable, the TOUR can work well. So, I would like to know two things.
1. can I use stand-alone TOWER without using the controller?
2. If the above is Yes, how can I configure the PPoE on cat2950 to TURN Support correctly?
Thank you very much.
Hi Jian,
Q. can you a RIDE operate independently of a wireless LAN (WLC) controller?
A. No, towers may operate independently of the function WLCs. tours in conjunction with a WLC only. The reason is that the WLC provides all the configuration settings and the firmware that the TOUR needs in the process registration.
So you will need to return the AP and download the version of IOS, buy a WLC or convert the TOWER to IOS :(
Q. how to distinguish between a regular (standalone) AP and a TOWER?
A. the best way to distinguish between a regular access point and a TOWER is to look at the reference number of the AP.
LAP (AP light Protocol [LWAPP])? The numbers always begin with AIR-LAPXXXX.
Autonomous AP (Cisco IOS? Software)? The numbers always begin with AIR-APXXXX.
This doc. good Q and A
http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_qanda_item09186a00806a4da3.shtml
You can convert an access point of the mode light return to autonomous mode by loading a Cisco IOS version that supports stand-alone mode (Cisco IOS release 12.3 (7) JA or earlier version). If the access point is associated with a controller, you can use the controller to load the version of Cisco IOS. If the access point is not associated with a controller, you can load the version of Cisco IOS using TFTP.
By using a TFTP server to revert to a previous version
Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:
--------------------------------------------------------------------------------
Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.
Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.
Step 3 Rename the access point image file in the folder of the TFTP server c1200-k9w7 - tar.default for a series of 1200 point, c1130-k9w7 - tar.default of access for a series of 1130 access point and c1240-k9w7 - tar.default for a series of 1240 access point.
Step 4 connect the PC to the access point using an Ethernet category 5 cable (CAT5).
Step 5 disconnect the power to the access point.
Step 6 push the MODE button and hold the button while you reconnect power to the access point.
Step 7 hold the MODE button until the status of the LED turns red (approximately 20 to 30 seconds), then release.
Step 8 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.
Step 9 after the access point reboots, reconfigure using the GUI or the CLI.
This doc.
I hope this helps!
Rob
-
Hi can someone help me, I have a printer hp laserjet 4345 mfp showing low error memory
Here's a link below which may help you with this problem.
Let me know if this can help, thank you
Maybe you are looking for
-
the .xlsx files I opened previously now is no longer open Excel 2008. The pop-up said that the file may have been "damaged or changed compared to its original form"? can anyone help with this?
-
XNET - activation of the RPC Server - error
Hello I am trying to load XNet database on my RT goal and now I get the error using the Xnet API. Running multiple remote database manager XNet vi doesn't help not either as it is still stuck with the error and no waiting period. I can connect to my
-
The source network c:\b9fda9d8bdfc317fa4e2\ that I can't uninstall because it lacks this same file is missing. He also says that Silverlight.msi is unavalible.
-
Now this Digital Locker service is gone and my backup CD not working anymore... Now what?
If its great that Microsoft went to the microsoft store option. What should I do now that the Digital Locker service is gone and my backup CD is now damaged for some reason any. I'm logged into the bank account and none of my ancient history is saved
-
I bought the printer mumbai to donote to my school in my village. I tested the printer in mumbai and now want to take to my Village. I have to travell 15-20 hours by Bus to get to the place. So just wanted to know what kind of precautions should take