Update KB2690729 will not settle - error: "the source of the network is missing" and says that Silverlight.msi is unavalible.

Similar Questions

• My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.
  
  You can also remove active - update.xml, or even updates.xml (stores the history of update).

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• My acer aspire V nitro will not download firefox 39, it hangs at 46.6 m and says that the file can't be varified

  I uninstalled the old version of Fire Fox and I tried the download 39.0 out of sight of firefox. Now download 50% cycles then goes back to 0% and start over again. I stopped this cycle to 4 times through. The computer is running windows 8.1 and internet Explorer seems to work very well. I have other computers running firefox with no updates of prlblems.

  You seem to be using Firefox 39 ad on a 8.1 Windows machine.

  I guess it's another machine, then use it to download the installer of Windows of Firefox 39, then transfer the file using a USB key or another method.

  Get Firefox to a site official use getfirefox.com or mozilla. org

  • See How to download and install Firefox on Windows

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• My computer will load a program, but will not give me the icon quick launch and that if I never downloaded the program

  My computer will load a program, but will not give me the icon quick launch and that if I never downloaded the program. How can I fix it so the SLL laucher works.

  Sorry, it's a product of the gainful. I can't test it. Go to http://support.vocalocity.com/ for support.

• I have Photoshopp CS3 on a PC running Windows 8.1.  Bridge froze.  Can I upload photos with the bridge but bridge itself will not respond to the commands of sny, and is the only way to leave the bridge to close.  I tried to use my originsl disc for repair

  I have Photoshopp CS3 on a PC running Windows 8.1.  Bridge froze.  Can I upload photos with the bridge but bridge itself will not respond to the commands of sny, and is the only way to leave the bridge to close.  I tried to use my originsl disc for repair and also tried to uninstall and reinstall and the problem persists.  Any help?

  Hello

  Bridge closing

  Go to this site C:\Users\schawla\AppData\Roaming\Adobe\Bridge (Version) \Cache
  Shift + delete all folders inside this folder cache.

  Reopen the bridge and use

  Concerning

  Jitendra

• HP Pavilion will not connect to the network

  Recently bought a HP Pavilion laptop and have tried to connect to my wifi at home. He returns constantly with incorrect network security key even though I'm 100% sure that it is correct, because I use the same password for other devices. I had to change my password for my wifi hub and enter this new password as the network security key which fortunately worked however, this means that every device in my house had to be resumed contact with the new password. Not only was it a lot of your time, but as soon as I turned off my laptop and turn it back on again a few hours later, it would not connect to the network again and continued to say the incorrect network security key (and this time changing my password for my wifi does not work). I was unable to use my laptop now because she's not not able to connect to my network and internet and it drives me crazy so help would be very appreciated to help me solve the problem

  Hey Amylou2603,

  Thank you! Exactly what I needed.

  Can you tell me if you have tried the steps that I posted in my previous answer and the results?

  You will also want to try to update the drivers for the card wireless on the laptop. You can find the drivers here: 15-n267sa HP Pavilion PC drivers. You will find them listed under network after you choose your operating system and click Next.

  There are a number of drivers here. Make sure you only download the drivers that match your exact wireless adapter. To see which card you have:

  1. Press the Windows Key + X.
  2. Select Device Manager.
  3. Expand network adapters.

  Once you have checked the map, download the appropriate drivers and run the installer.

  Let me know if these steps resolve the problem.

• KB960859 and downloaded KB970430 security updates but will not install, error Ox8007F01E

  security updates KB970430 KB960859 AND toward the down loaded but will not be installed for several weeks now, the code error Ox8007F01E how to install these - what I should do.

  Original title: error Ox8007F01E

  Hi krashprone,

  Did you perhaps try downloading directly to install?  Please take a look at the link here for KB960859 and here for KB970430.

  Please let us know.

  Thank you!

• OfficeJet 6500 will not connect to the network

  OK - I know this ground was picked up, but I used every fix recommended here & come again empty-handed. Here's the deal: I have two Macs: a Mac Pro (Basic) and an iMac (remotely). Mac Pro running OS X.5; iMac runs OS X.6 (Snow Leopard). Cable ADSL from the wall to the router (Belkin pre - N); cable router on Mac Pro; HP 960C and JO 6500 has connected to the Mac Pro via USB connections separate. HP 960C and JO 6500 well work w / Mac Pro (by cable). HP 960C has worked (via radio) w / iMac up to what I've updated to Snow Leopard - no surprise b/c HP 960C does not (and will not) Snow Leopard driver. Wireless connectivity for iMac is fine except for OJ 6500 a. I tried everything - washing & re - install the software from the Apple website. Connection via IP address instead of the standard method (automatic); After installation by using the IP address, I get: "(IP address) is currently unavailable." Please check if it is turned on & connected or try again later. "or"home network is busy. I try to send a print job - it goes to the 6500 but 93% finished and then permanently suspended. Printer icon bounce on star red w Dock & number '1' on this issue. In the list of printers, 6500 has a Red House, rather than a green.

  OK - I found the answer on the Apple site & boy is simple: (1) remove the printer since the two machines, (2) drivers turn off 'sharing' on the host machine, (3) install the drivers on the host, (4) install the drivers on the remote computer, (5) turn on printer sharing. Voila! It's a question of the order in which you do things...

• Compact Z3 will not connect to the network

  Hello. A week ago my compact z3 ceased to make and receive phone calls and texts while the mobile web still worked very well. I thought the problem was with the service provider and they changed the old 3g to a new 4g sim sim. Now also Internet has stopped working and still no calls / texts pass anyway. Internet still work with the old 3g sim.

  I tried to manually connect to the network (3g and 4g both) but no luck. Naturally the phone has been restarted a couple of times.

  Someone at - it had the same problem?

  Thank you.

  He ended up not being not at all a problem of sony. The phone had been stolen before I have bought, but had not been reported before now and now it has been locked. The one I got as a replacement (same model) works perfectly well.

  Thanks for your help!

• Empty blackBerry Smartphones host routing table, will not register with the network.

  I want to apologize if I put this post in the wrong thread.

  So here's the question. I sent a request to my service provider to upgrade several SIM's have Blackberry service added to them. I asked specifically for them to make sure that the SIM card have been set to BES not BIS. The first SIM card I try to register with the network does the following for me. The phone, before I save it with the BES server can call and surf the internet. Once I have sync the phone with the company's server and I go back outside to check on her send and receive these emails, I try to control the internet and it says that the service is not available. I have 3G (Yes capitol) service and I can make phone calls. The host routing table is empty and when I try to save the phone it just says 'sent message' but I never receives the roads. I wiped the phone and repeat the steps with the same result. I contaced the carrier because all the Google search I did pointed to the carrier but they swear the correct plan is attached. Please if anyone can help me it would be greatly appreciated.

  Hello and welcome to the community!

  In fact, he should persist with the carrier. But first try to remove this BB to your BES, then by the ResetToFactory WIPE to remove the it strategy. Then run everywhere with the BB, ensuring that you can do all the activities of BIS (including filling of the HRT) before activating the BES. If it continues to fail, then you must climb the carrier and BIS get work before you activate BES.

  HRT and the functions of BIS should not be affected by BES, unless there is something in your it strategy that does. It is not very likely but it should impact the devices ALL active BES, not one only.

  Good luck!

• Printer all-in-one HP Envy100 will not connect to the network

  HP Envy 100 D410a connects to the network even with MAC disabled on Dlink router according to the indications 'wireless network test report?  What should I do now?

  OK, everything looks good.  The firmware is updated on the router?  You've restarted the router (pull power plug temporarily)?

• Photosmart C7280 will not communicate with the network. The diagnosis says that the Radio does not

  Photosmart C7280 C5582A work through a MacBook via a Mac (OS 10.5.7) wireless router was working fine last week.  Today when I tried to print, the printer was stuck in the "printing page 37%.  When I checked the Print Manager, the printer was "slowed" and since I had a lot of trouble with this printer connection before losing, I did what HP told me the last time which was to remove the printer and then recharge it.  Except that this time, once the printer has been deleted, he could not find the printer even after I restarted the wizard and reinstated the SSID and WPA many times.  I have reset the printer and the router by turning off and disconnect power provided, but he still had the same problem.  When I ran the diagnosis, he told me: 'Pass on Radio, Radio work on failure, not plugged cable Ethernet-Pass' the rest of diagnosis is "not run" and other data on diagnostic tests are the Mac addess.  The Diagnostic says the "wireless radio does not work.  Contact HP support.  Unfortunately, it's evening Sat and HP support is closed.  Any help or is this printer dead?  (I spent a fortune on ink cartridges)

  It is indeed a hardware problem then.  I'm sorry.

  I always believe that repair costs would be better put towards buying a new printer.

  However, there may be options that I'm not aware where do not have access to.  This document has some support listed options.

  However, I recommend you contact HP support at the 1-800-474-6836 (to the United States and Canada).  Phone support can provide that more than an estimate on the repair or replacement of the printer with HP and you could compare this with the cost of a new printer.

  A new printer is under warranty and most likely to be an improvement on an older printer.

• Blu Ray will not connect to the network

  I have a blu - ray player that was able to connect to the internet era the first that I installed it. Now he sees my wireless network but cannot connect to it. All my other devices home plug correctly. Cable connection works fine, but we need a Wi - Fi connection. I tried to reset to factory setting network settings, but it did not help. I was able to connect to other networks that is not the password protected but not connected to the internet. Why did before, but not now, when nothing has changed?

  I did all this and the DVD drive still does not work.  My solution; Take the Sony DVD drive and get another brand that actually works the way it's supposed to.

• LaserJet pro 400 m425dn mfp: mfp laserjet pro 400 m425dn will not connect to the network

  I just bought a mfp laserjet pro 400 m425dn printer/phtocopier and I can't seem to connect to our network.  I have it plugged into the router and it says "cable disconnected" without an IP address.  I don't have the USB cable to configure the machine and I was hoping to do it via the network (which tells me is an option).  I don't know if that has something to do with it.

  Any help would be greatly appreciated.

  The printer should be released the box set up using DHCP for addressing.

  When plug you it into the router it should pull an IP address, if it is its cable disconnected then you might have a bad port on the router, a bad cable or a bad printer.

  Plug something else into the same port with the same cable and see if it works, if you have a defective printer and need to return it and get a replacement.

  You may also be able to find someone to replace the trainer who has the network port to it.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...