shrink the KING

Similar Questions

• How can I change the view in the workspace to see the entire track or a song or just a bar across from the workspace: to expand or shrink the display horizontally, but not vertically?

  To enlarge or shrink the display in the workspace horizontally

  There are no assigned keycommands for this. This means that you assign to the keys of your choice.

  

  

  Here's the manual explaining how.

  http://help.Apple.com/LogicPro/Mac/10.2/#/lgcp41ff6979

• Manipulation of the KING

  Hi guys,.

  Part of my current LabVIEW project involves me using a video stream, and the user will have to draw several Kings on the power supply.

  I would like to be able to allow the user to use an interface buttons to control the creation and the removal of the Kings, as opposed to the rather rough "n" ready approach "hold the key ctrl + click. Ideally, I'd like there to be a button display 'Create KING' that will create a ROI (rectangular) image, which the user can then move and resize as they see fit. I would also like an option 'Remove the KING', where the user will specify (perhaps from a drop-down menu) what return on investment that you want to remove.

  I think that this can be done using property nodes, but impossible to achieve real progress on this. How should I go about this?

  Thank you
  David

  

• the protection of the KING region in the image control.

  I use the return on investment on an image rectangle.

  As you well know, the KING can move or change the size by clicking and moving the mouse.

  But when the user clicks a position outside the KING, the current KING will reset and disappeared from the image control.

  Is there an idea on how to get information about the event or property to protect the KING?

  (Region KING detects the manipulation of the mouse event).

  I just wanted to keep, move or translate the present KING with the handling of the mouse.

  My application must have an entry a consistent ROI in real time.

  labmaster.

  I just put extra code to check if the current KING is valid or not to cash the size of the table of the global rectangle.

  Invalid KING means no size of table or the same position of x 1 and x 2 (for y, the same thing.) of the rectangle.

  I know this isn't a perfect way to keep the KING, but it is OK for me virtually.

  labmaster

• How to create the KING of the CRA?

  I need a KING who so defined by an arc, is there a simple way to do this? I can create an overlay of arc via the 'Arc of overlay IMAQ', but can it be converted into a return on investment?

  all suggestions greatly appreciated...

  Unfortunately, there is not a CRA return on investment. But you're on the right track with a ring. First, create a ring with the inner radius equal to the radius of the outside. Then use "IMAQ convert ring to the KING" to create the return on investment. Then move the KING to "IMAQ concentric Rake 3. He must seek the edges along a single arc.

  Hope this is useful

  Ben

• Strange problem with the KING and IMAQ find right 3 edges

  So first of all, I noticed that the KING produced by KING features seems to have an incompatibility with the entrance to find right IMAQ 3 edges:

  

  In my code, I have the strange problem "IMAQ find right edges 3" is the production of edges that lie outside the limits by the wired KING specifided: "."

  

  In this case, a return on investment, defined by a rectangle, I [476, 1559, 752, 1779], but the best line produced by VI shape is outside this rectangle (see ordered 1876).

  How is that possible?

  I finally thought to it - it was my fault. I was updating the global rectangle in the KING entered correctly, but not the contours.

  I fixed the wiring and now it works fine.

  Detective Conan!

  G

• Change the color of the KING GROUP

  Hello

  can someone let me know if changing the colors of the KING when I grouped?

  I want the oval KING green or other colour than RED.

  In addition, the oval has an additional ANGLE line. Does anyone know how to get rid of it?

  

  Hey Krispiekream,

  In terms of getting rid of the extra line, I answered your last thread. What about the color change, unfortunately, return on investment will be one color. You can change this color with a property node, but I don't think that there is a way to change the color of each individual KING (and always keep a return on investment and does not convert the return on investment for an overlay).

• Crossroads of the KING

  Hello, I wonder if it is possible to create an area of interest in the area of the intersection of two other Kings.  I am creating a semicircular KING, and I've defined a rectangular KING who defines a circular, which defines the corners and edges.  What I want is a KING resulting unique which consists of areas inside of two of them (intersection, union steps).  Is there a way to do this?

  Thank you

  Paul

  Hello

  You can do this by creating masks of image corresponding to the Kings, ANDing, and then re-create a new return on investment based on the resulting image.

  The KING that results will be a polygon. VDM include screws that allow to create masks of Kings and vice versa.

  See the attached example code.

  I hope this helps.

  Best regards

  Christophe

• How to move the King with the castle on the titans of chess?

  I'm not sure of what is called the movement but in titans of chess, the computer moves the King with the Castle, how to make the same move? I'm new to this, so any help would be a great help.

  It is called castling.

  You can even move if 1) the King and the Tower never moved, 2) if the King is not in check, move in a square in failure, or end up in failure, 3) there is no room between them.

  You can Castle, by touching the King and you'll see there is an option to pass 2 or 3 squares toward either Rook, who will perform the Castle. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• What is the difference between the KING and ACQWINDOW regarding the attributes of the camera?

  There are two sets of attributes for, left, top, width, and height.

  For example, there

  IMG_ATTR_ROI_WIDTH vs IMG_ATTR_ACQWINDOW_WIDTH

  MG_ATTR_ROI_HEIGHT vs IMG_ATTR_ACQWINDOW_HEIGHT

  What are the differences between the KING and ACQWINDOW?

  Thank you.

  Hi sunspotzsz!

  Vision consists of two main steps: acquisition and image processing.  IMG_ATTR_ACQWINDOW_WIDTH would the acquisition, and IMG_ATTR_ROI_WIDTH should be part of the treatment.  Therefore, if you set the ACQWINDOW_WIDTH to 100 so that numbers all pixels that are acquired will be set to 100, and they will be stored in a buffer.  ROI_WIDTH will use an image that is already in memory and 'zoom' so that the only part of the image you are watching / treatment.

  Also, take a look at this knowledge base on the Kings: KING FAQ you may find it useful!

  Kristen H.

• Unable to shrink the vista partition

  I have 200 GB of space free, but unable to shrink the partition through computer management. In the space to shrink, it shows 0.

  Thank you

  I have 200 GB of space free, but unable to shrink the partition through computer management. In the space to shrink, it shows 0.

  Thank you

  If you try to reduce the drive C please follow the steps below
  

  Shrink C: drive using the command prompt

  ===========================

  1. click the Start button, and then in the "Search" box type CMD.

  2 in the list above, under 'Programs', then right-click on CMD appears above and choose 'Run as administrator' and click 'continue '.

  3. in the opened window, type the following commands one by one and press ENTER after each command:

  C:

  CD %windir%\system32

  DiskPart

  the list volume

  Note: After you run the command 'list volume', it shows all the partition.

  Select the volume

  Note: Please replace the "" for the volume number of the C drive. For example, if drive C volume number is 2, we execute the command 'select volume 2 ".

  Shrink desired =

  Note: Please replace the "" disk space you want to reduce. After running the command, it will shrink MB of free space on drive c. (1 GB = 1024 MB)

  After the arrival of process control, restart the computer and check if we have shrunk the C drive successfully.

  
  

  If the problem persists C: drive shrink mode safe

  ======================

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when you see the boot menu.

  2. when the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.

  3 log on to Windows by using the administrator account or any account of a user with administrator privileges.

  After the system in Mode safe start, please try to shrink C: once again in fashion without failure.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• In disk management, I checked the drive to shrink the process after that he had finished he told me that there is space for shrinkage of 9 GB!

  Hi all

  I only have one disc space (C) with 1 TB space, the free volume of that disk is about 330 GB, I want to reduce it to create the new volume. In disk management, I checked the drive to shrink the process after that he had finished he told me that there is space for shrinkage of 9 GB!
  Can someone help!

  Original title: Shrink Volume

  The common cause for limited space retractable is the Table of master files (MFT). It is essentially a system file good behaviour that even Windows own Defrag tool will not move.

  PerfectDisk will clean this file and there is a free trial available.

• ALTER TABLE SHRINK the SPACE COMPACT takes a long time

  Hello
  I run:
  ALTER TABLE TOM. TAB1 SHRINK SPACE COMPACT;
  ALTER TABLE TOM. TAB1 SHRINK SPACE WATERFALL;

  
  The "ALTER TABLE TOM. Tab1 SHRINK SPACE COMPACT"was completed in 2 hours, but"ALTER TABLE TOM. Tab1 SHRINK SPACE WATERFALL"is still underway after 8 hours, less than the size of the table TAB1 and index:

  NOM_SEGMENT... GB
  TAB1................................. 166
  IDX01................................ 83
  SYS_C00......................... 42
  IDX02............................. 142
  IDX03.............................. 66
  IDX04............................. 122

  
  Why 'SHRINK the SPACE COMPACT' takes a lot of time?
  Is it possible to check how much time should I take?

  Thanks in advance!

  Running

  ALTER INDEX TOM. TAB1_IDX03 SHRINK SPACE COMPACT;

  ALTER INDEX TOM. TAB1_IDX03 SHRINK SPACE;

  set is useless, as does 'SHRINK the SPACE' that means "SHRINK SPACE COMPACT" and much more (see the quote from the Doc Oracle Hemant).  2, 'SHRINK the SPACE' is the operation that will take more time.  So if 'SHRINK the SPACE' is what you wanted (reclaim space) and you can afford to wait, run 'SHRINK the SPACE' only.

  "SHRINK the COMPACT SPACE" is a part of the work that 'SHRINK the SPACE' is only.  Generally, use you it when time is at a premium: you run SHRINK SPACE COMPACT a weekday evening (because SHRINK the SPACE does not fit in one night and accrue hourly) and you run SHRINK SPACE on the weekend to finish following the recovery of your space.

  Regarding the fact that the entire segment or a partition after another, I have no experience - I both of their time and test methods.  Perhaps running several sessions at the same time on different partitions would save time (but be more heavy on the CPU and storage).

  Also note that SHRINK the AREA generates a lot of REDO (keep an eye on the free space of your ARCHIVELOG destination).  With your data volume, I would expect dozens (or even hundreds) of gigabytes of roll forward must be generated.

• shrink the image

  I'm very new to Photoshop.  How to resize a picture and shrink the image with it (no crop).  The image is 2244 x 2244, and I want to reduce it to 1024 x 1024.  Here is the file:

  

  Image > Image size to be sure that your units are set to Pixels and don't worry the resolution number.

  

• Pull and shrink the text and images in Illustrator. More

  Usually I can shoot and shrink the text and images in Illustrator. Twice now, I've lost this ability. Can I change the size of the text, but the area around the text disappeared. It is only pointed out, I can't enter the end and push it to fit, I can't enter the corner and stretch to fit. Even for images, I can't change them, I can move them only once they have been placed. Usually I press SHIFT and click on a corner and scale or no change and change size and shape everything as I wish. What is going on??

  Probably hit the toggle to show/hide the bounding box is (Ctrl) Cmd - Shift - B. Some other programs use this to activate fake "BOLD".