Crossroads of the KING

Similar Questions

• Manipulation of the KING

  Hi guys,.

  Part of my current LabVIEW project involves me using a video stream, and the user will have to draw several Kings on the power supply.

  I would like to be able to allow the user to use an interface buttons to control the creation and the removal of the Kings, as opposed to the rather rough "n" ready approach "hold the key ctrl + click. Ideally, I'd like there to be a button display 'Create KING' that will create a ROI (rectangular) image, which the user can then move and resize as they see fit. I would also like an option 'Remove the KING', where the user will specify (perhaps from a drop-down menu) what return on investment that you want to remove.

  I think that this can be done using property nodes, but impossible to achieve real progress on this. How should I go about this?

  Thank you
  David

  

• the protection of the KING region in the image control.

  I use the return on investment on an image rectangle.

  As you well know, the KING can move or change the size by clicking and moving the mouse.

  But when the user clicks a position outside the KING, the current KING will reset and disappeared from the image control.

  Is there an idea on how to get information about the event or property to protect the KING?

  (Region KING detects the manipulation of the mouse event).

  I just wanted to keep, move or translate the present KING with the handling of the mouse.

  My application must have an entry a consistent ROI in real time.

  labmaster.

  I just put extra code to check if the current KING is valid or not to cash the size of the table of the global rectangle.

  Invalid KING means no size of table or the same position of x 1 and x 2 (for y, the same thing.) of the rectangle.

  I know this isn't a perfect way to keep the KING, but it is OK for me virtually.

  labmaster

• shrink the KING

  Hi all

  I found the return on investment of an (irregular) object using mask IMAQ to the KING. This KING now covers the entire area(100%) of the object.

  I want to reduce the return on investment from all sides, so that only 80% (or any other %) of the area is covered.

  How can I do?

  Any suggestion is welcome.

  Concerning

  Aveo

  I would consider the conversion of the KING in a binary image (mask) and by using the function to erode to reduce the size.  It will remove the same number of pixels on all sides, so the form will change, but it works for all forms.  You could perhaps in loop and remove a couple of layers at once until the box is the percentage that you want.

  Bruce

• How to create the KING of the CRA?

  I need a KING who so defined by an arc, is there a simple way to do this? I can create an overlay of arc via the 'Arc of overlay IMAQ', but can it be converted into a return on investment?

  all suggestions greatly appreciated...

  Unfortunately, there is not a CRA return on investment. But you're on the right track with a ring. First, create a ring with the inner radius equal to the radius of the outside. Then use "IMAQ convert ring to the KING" to create the return on investment. Then move the KING to "IMAQ concentric Rake 3. He must seek the edges along a single arc.

  Hope this is useful

  Ben

• Strange problem with the KING and IMAQ find right 3 edges

  So first of all, I noticed that the KING produced by KING features seems to have an incompatibility with the entrance to find right IMAQ 3 edges:

  

  In my code, I have the strange problem "IMAQ find right edges 3" is the production of edges that lie outside the limits by the wired KING specifided: "."

  

  In this case, a return on investment, defined by a rectangle, I [476, 1559, 752, 1779], but the best line produced by VI shape is outside this rectangle (see ordered 1876).

  How is that possible?

  I finally thought to it - it was my fault. I was updating the global rectangle in the KING entered correctly, but not the contours.

  I fixed the wiring and now it works fine.

  Detective Conan!

  G

• Change the color of the KING GROUP

  Hello

  can someone let me know if changing the colors of the KING when I grouped?

  I want the oval KING green or other colour than RED.

  In addition, the oval has an additional ANGLE line. Does anyone know how to get rid of it?

  

  Hey Krispiekream,

  In terms of getting rid of the extra line, I answered your last thread. What about the color change, unfortunately, return on investment will be one color. You can change this color with a property node, but I don't think that there is a way to change the color of each individual KING (and always keep a return on investment and does not convert the return on investment for an overlay).

• How to move the King with the castle on the titans of chess?

  I'm not sure of what is called the movement but in titans of chess, the computer moves the King with the Castle, how to make the same move? I'm new to this, so any help would be a great help.

  It is called castling.

  You can even move if 1) the King and the Tower never moved, 2) if the King is not in check, move in a square in failure, or end up in failure, 3) there is no room between them.

  You can Castle, by touching the King and you'll see there is an option to pass 2 or 3 squares toward either Rook, who will perform the Castle. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• What is the difference between the KING and ACQWINDOW regarding the attributes of the camera?

  There are two sets of attributes for, left, top, width, and height.

  For example, there

  IMG_ATTR_ROI_WIDTH vs IMG_ATTR_ACQWINDOW_WIDTH

  MG_ATTR_ROI_HEIGHT vs IMG_ATTR_ACQWINDOW_HEIGHT

  What are the differences between the KING and ACQWINDOW?

  Thank you.

  Hi sunspotzsz!

  Vision consists of two main steps: acquisition and image processing.  IMG_ATTR_ACQWINDOW_WIDTH would the acquisition, and IMG_ATTR_ROI_WIDTH should be part of the treatment.  Therefore, if you set the ACQWINDOW_WIDTH to 100 so that numbers all pixels that are acquired will be set to 100, and they will be stored in a buffer.  ROI_WIDTH will use an image that is already in memory and 'zoom' so that the only part of the image you are watching / treatment.

  Also, take a look at this knowledge base on the Kings: KING FAQ you may find it useful!

  Kristen H.

• Hi my game Center leaves me not to accept friend requests, load any games im unable to load data because of connectivity issues and the King Games I have when you want to send queries, you need to connect whenever fbk his shit

  Hi my game Center won't let me load any games or accept friend requests and when I try to accept queries etc. of friends on my King of games it's connect to facebook every time his shit. phone says on the game center connectivity issues I am not worked before

  Hi, kitecatgirl.

  Please visit Apple support communities.

  I understand that you experience connectivity problems when you access Game Center accepting friend requests.  Here are some troubleshooting steps that I recommend to go through this problem.

  Get help

  If you are unable to connect to Game Center or stay connected, follow these steps:

  1. Make sure that you are connected to the Internet.
  2. If you cannot create an account or sign in to Game Center of in a game, try to create an account or sign in with the Game Center app.
  3. Sign out of Game Center, then reconnect. If you can not you connect to Game Center with an Apple ID, reset your password, or use another email address. To manage your Apple ID, see my Apple ID.
  4. If you use a connection Wi - Fi, be sure that your Wi-Fi router is configured for Game Center.
  5. If you can't connect to a Mac, continue with the steps to solve the sign in questions.

  If you have a problem with a game of Game Center, follow these steps:

  1. Make sure you have the latest version of the game. To check for updates, go to App Store > updates.
  2. Test your connection by using a different game. If you cannot connect with a specific friend or player in multiple games, they might need to check their Wi - Fi connection and router settings.
  3. On iOS, try opening the game to the home screen, rather than the inside Game Center.
  4. If you cannot resolve the problem, follow the steps described in the next section to report the problem to the developer.

  Game Center on your Mac or iOS device using

  See you soon

• extract the KING

  I am new user of vision & I'm trying to extract an image of KING. I had the code but not able to run it successfully. I enclose my code. Please, look at the code & suggest me the problem.

  answer soon.

  Problems in your code:

  (a) race condition

  (b) disorder

  

  Andrey.

• 2 request - Glide part emulators Windows 7; Set of 8 install the King Quest

  Anyone has properly installed and used an emulator of sliding (of 3dfx graphics API) in Windows 7, 32-bit or 64-bit, with any game?

  Second, no matter which successfully installed and executed game King's Quest 8 in Windows 7, with or without support Glide? Yes, it's old, but...

  I tried to run the game in virtual environments with mixed OS (Win98, WinXP) and generally unsatisfactory results so hoping that someone else has already paved the way for this in Win7.

  Finally tried. Installed 64-bit Windows 7, this game doesn't quite work. Crashes just after the initial startup screen, with or without installed emulators.

• Save the King in the image

  Hello

  I want to know how I shoot the line and point selection and when I click on the button 'save' the image retains the line and the selection in the image and save it.

  I can normally get and I click on save, record perfectly, but when I click with the tool 'Point' for the second time that it gives me a message saying that the image format is not valid. But with the online tool I can draw and save again.

  I wonder because it gives the error and how can I make the selection tool to work.

  I m using the vision of development.

  See attachments.

  Thank you.

  In the VI MergeOverlay, there is an entry for a source and a destination image.  You must create a new image (RGB U32) reference to connect to the destination image.  Otherwise, your original image is converted into an RGB image if you want whether it is or not.  The MergeOverlay output is always RGB U32.  Then you get an error when you try to use the magic wand IMAQ vi the second time (I guess).

• Extract the KING including the overlay

  People - you are looking for an effective method with Vision screws to extract a region of interest (paragraph of an image) defined for example by drawing a rectangle on the image.  The paragraph in question has information about overlay.  The final area of extracted should contain subsection and overlay information, without having merged collections information in the image itself.

  So far, my current attempts to do this are not successful.

  The easiest way I can imagine - is combination Shift - culture, something like this:

  

  result:

  

  Code (LV2011), also attached

• build the KING

  Hello

  I have an image that I made and I would like to allow the user to specify a return on investment (a rectangle would be good) to work on.

  My entry is my 16-bit image (1024 x 768) and I would have output an image that will be the rectangular portion of the image selected by the user.

  Please find attached my picture.

  Thanks for your help

  Take a look at this vi.  Draw a return on investment of the left image and the content is shot in the right image.