Shrink the registry (CFVariables)

Similar Questions

• Where is the registry entry for the tools-> advanced-> general-> browsing-> Use Hardware Acceleration where Possible

  Anyone know if this can be enabled/disabled in the registry and where it is?

  Tools-> advanced-> general-> Browse-> use hardware acceleration where Possible

  So in order to change the preference via a script, I found information that needed to be changed in "subject: config", "thanks cor - el", then he ran into a batchfile as follows

  Example A - it is run once and added to the current file prefs.js, but maybe it can stay alone.

  CD /D "% APPDATA%\Mozilla\Firefox\Profiles\*.default".

  Set Ffichier = % cd

  echo user_pref ("layers.acceleration.disabled", true); > > "% ffile%\prefs.js".

  Set Ffichier =

  CD %windir%\System32

  Example B - this is run and creates a new file called user.js or adds to the existing one. This file has a higher priority to prefs.js

  CD /D "% APPDATA%\Mozilla\Firefox\Profiles\*.default".

  Set Ffichier = % cd

  echo user_pref ("layers.acceleration.disabled", true); > > "% ffile%\user.js".

  Set Ffichier =

  CD %windir%\System32

  Example C - this replaces user.js each time, by changing the number of ' > ' change it to append to crush.

  CD /D "% APPDATA%\Mozilla\Firefox\Profiles\*.default".

  Set Ffichier = % cd

  echo user_pref ("layers.acceleration.disabled", true); > '% ffile%\user.js '.

  Set Ffichier =

  CD %windir%\System32

• Satellite P300 - 1542 errors in the registry of Vista - low health?

  Recently, I installed Uniblue Registry Booster.
  When I run the program, it says after that it's over there:

  1542 errors and that the registry of health is low.

  Is it safe to use this program to fix registry problems and speed up the registry?

  Anyone tried this?

  Best regrads,

  René

  Hello

  The Uniblue Registry Booster does not for me, but I m using the CCleaner.
  It s a free tool and you can use it for registry cleaning as well.

  I've never had problems with this tool so I can recommend the use of this.

  See you soon

• Satellite M40-276: sound card is shown to the registry sometimes not

  I have a sound problem. Sometimes the sound card is shown to the registry sometimes not.
  I fixed my laptop, but there is no sound card.
  Sorry for my bad English

  Hello

  First of all, I would like to know if you have problems with the sound.
  Second, check device manager if the sound card driver has been properly installed. If not then you should see a yellow exclamation next to the card (Controller)

  What you can do is download the driver of his most recent on the Toshiba site, then install it on the laptop.

• How can I change the view in the workspace to see the entire track or a song or just a bar across from the workspace: to expand or shrink the display horizontally, but not vertically?

  To enlarge or shrink the display in the workspace horizontally

  There are no assigned keycommands for this. This means that you assign to the keys of your choice.

  

  

  Here's the manual explaining how.

  http://help.Apple.com/LogicPro/Mac/10.2/#/lgcp41ff6979

• AD can be used to configure the registry?

  Active directory can be used to configure the registry? My understanding is that only local security settings can be configured using Group Policy in the ad. I've always written scripts of security in order to harden the registry. Please adise, thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Error after using the registry work around for KB3072630

  I have problems with an MSI installation. At first, I was getting a registry ddl error that I used the registry subkey entry 'RemappedElevatedProxiesPolicy = 1' work around. Now, the mistakes of process with service error 1719 Windows install could not be found (from the application).  Logging of MSIEXEC product "Custom Server rejected Action - incorrect context", while the Windows Logs/Applications event: service error 1719 Windows install could not be accessed. Any ideas? It is on Win Server Ent. 2008 R2

  I have problems with an MSI installation. At first, I was getting a registry ddl error that I used the registry subkey entry 'RemappedElevatedProxiesPolicy = 1' work around. Now, the mistakes of process with service error 1719 Windows install could not be found (from the application).  Logging of MSIEXEC product "Custom Server rejected Action - incorrect context", while the Windows Logs/Applications event: service error 1719 Windows install could not be accessed. Any ideas? It is on Win Server. Ent 2008 R2

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Development of pilots WEC2013 SDHC - what are the registry and setting of the catalog

  Development of pilots WEC2013 SDHC - what are the registry and setting of the catalog

  We are the WEC2013 portage for a controller ARM. The operating system works very well.
  We have made our development using SYSGEN_FSREGRAM and SYSGEN_FSRAMROM.
  We are now developing driver SD card. We have helped in SYSGEN_SD_MEMORY, SYSGEN_SDBUS, SYSGEN_SDHC_STANDARD, and FAT in the catalog items for SD card.

  We did our sdhc.dll to our platform.

  We get the following error,

  PID:00400002 TID:004 B 0006 + SHC_IOControl (0xa5838f80, 0x00071c24, 0 x 00000000, 0, 0xac67fc70, 16, 0xac67f928)
  PID:00400002 TID:004 B 0006-SHC_IOControl(rc = 0)
  PID:00400002 TID:004 B 0006 FSDMGR! MountStore: Failed to open store "SHC1;: error = 31

  Can we do something else?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Restore the registry from the host.

  Hello

  Recently, I had a new hard drive installed in my Tower for my counter top.  I like to play POGO games and was not able to load some games.  When I called POGO they told me that my 'winregistry home' had disappeared and I needed this registry to load games.  They also said that they could solve the problem for $99.00.  I ask if there is another way to save me this kind of spending, and always to restore the registry.

  Because I know very little about all this, I don't want to get ripped off and to find more late that could have been done online for free.  Can someone at Microsoft explain that and then maybe help me with this problem.  Thank you very much.

  Chief John

  e-mail: * address email is removed from the privacy *

  Hello

  What version of Windows are you using?

  They were talking about the Host file?

  Never touch the file and the fact that he disappeared may be an indication of a virus or malware.  Restart and start typing the F8 key to display the logo of the manufacturer.

  Select Mode safe mode with networking

  Download the following tool and run a scan complete

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  When finished, restart the computer

  Open the Windows program Notepad and find the following information:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line. In addition, there must be at least one space between "127.0.0.1" and "localhost". The second line is an IPv6 address mapping to localhost, and this line is part of the default for Windows Vista and Windows 7 hosts file. There must be at least one space between ": 1" and "localhost".

  In Windows 2000 or XP, all you have to do to save this file "hosts" and you're done. In Windows Vista or 7, you have launched the program Notepad "as Administrator". This will allow you to record in the "hosts" file and the path when you try to save is a file system type.

  # Copyright (c) 1993-2009 Microsoft Corp.
  #
  # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
  #
  # This file contains the mappings of IP addresses to host names. Each
  # entry should be kept on an individual line. The IP address must
  # be placed in the first column, followed by the corresponding host name.
  # The IP address and the host name should be separated by at least one
  space #.
  #
  # In addition, comments (such as these) may be inserted on individual
  # lines or following the name of the machine indicated by a symbol "#".
  #
  # For example:
  #
  # 102.54.94.97 rhino.acme.com # source server
  # 38.25.63.10 x.acme.com # x client host

  resolution of name localhost # is handled within DNS itself.
  # 127.0.0.1 localhost
  #: 1 localhost

  Do not add the # in front of the last two items

  Name the file Hosts

  It goes in C:\windows\system32\drivers\etc

• blue screen after Ko 2840149, error - "STOP: c0000218 {Registry hive failure} the registry cannot load the hive (file): \systemroot\system32\config\SOFTWARE.

  After I installed security KB2840149 on a 2008 VM w/exchange server that is running on the machine of Hyper-v server 2008 I'm dead in the water w / E-mail down hard.  The virtual computer is in a reboot cycle bluescreening before I can get anywhere.  Tried the last well known - no effect.  Safe mode - so bluescreens.

  BlueScreen info:
  STOP: c0000218 {Registry hive failure}
  The registry cannot load the hive (file):
  \systemroot\system32\config\SOFTWARE
  or its log or alternation.
  It is damaged, missing, or not accessible in writing
  I saw that it was a patch of replacement for a patch that crashed a lot of PCs.  Since there is no history on this patch, I wanted to check in a see what is the best way to fix this on a virtual machine?

  Being not so deep on VM, I wasn't sure if there was a better way. But I just put the virtual machine to load 2008 iso and then made the standard repair for registry problems off the coast of the article below.

  Of http:

  If the Windows registry is slightly or moderately damaged, you may be able to restart the computer in safe mode and use system restore to restore the registry from the computer to the last known good configuration. However, if the Windows registry is seriously damaged, all types of logon will be prevented. Trying to connect to Windows causes the system fails, then restart. In this case, you will need to boot the system into the recovery instead of Windows Console. Once in the Recovery Console, you can use the Startup Repair tool. Startup Repair tool automates common diagnostic and repair of the installations of Windows tasks starts longer.

  (a) start your Windows Vista or Windows Server 2008 DVD
  (b) on the first Setup screen click Next
  (c) in the lower left corner of the screen, choose "repair your computer".
  (d) on the System Recovery Options screen, select your Windows installation and then click Next
  (e) click on "Command prompt".
  (f) go to X:\sources\recovery > startrep.exe
  (g) this will take some time but will look at any registry related issues.

• Error - "Launcher requires the write permission for World of Warcraft key to locate and launch the game successfully. Please turn on write access to the registry key with the help of an administrator account"

  Original title - edit registry of the world of Warcraft Launcher to write

  I downloaded the patch more recent game in my computer, I did a cleanup of the system and tried to log in again, but now the States window it "(Launcher requires permission in writing for World of Warcraft key to locate and launch the game successfully." Please allow write access to the registry key by using an administrator account)", how can I access the registry to resolve this problem? Help please

  Hello DaTurtle !

  I had exactly the same problem, I have not found the sollution here...

  But I found how to fix very easy !

  You do a right click on the WOW icon at the office-
  then browse to the location of the file -
  It will appear a lot of files-
  Click on the WoW program file instead of the pitcher-
  will start your wow game-
  Log in as normal-
  then he will come to the top to update...

  After the update your wow will work as usual!

  It worked on my computer, please respond!

  Hans_Craft

• upper and lower filters in the registry how ca I get it back

  in the registry, how can upper and lower filters I get them back. CD and dvd not being recognized

  Hello

  You are not absent from these filters, you do not want in most cases.

  This is for Windows 7 and Vista is very similar.

  ------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I remove a volume associated with vss in the registry?

  A USB hard drive already connected to the network has been removed.  The Event Viewer Application on my SBS 2003 server now gets error messages indicating the following:
  VssAdmin: Unable to create a shadow copy: the specified volume was not found or is not a local volume.
  Command line: "C:\WINDOWS\system32\vssadmin.exe create Shadow = 5 /AutoRetry / For = \?" \VOLUME {9af5d44a-8a5e-11dd-8e8c-806e6f6e6963} \'.
  I have already disabled the scheduled task that runs the service Shadow Copy Volume How to dissociate the volume listed in the registry?

  Hello

  Because the problem is with the server operating system, please report query in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
   

• Why can I not downloand the guided help to back up the registry keys?

  I have Windows XP with SP3 and Internet Explorer 7 on my gateway Media Center 11.  I tried to download the INTERACTIVE HELP to back up the registry in Windows XP and I got a message saying "it was not available.      Do you have a cure?   Thank you.

  Hello
  I suggest you to download from this link and check to see if the same problem happens:

  http://support.Microsoft.com/AW/322756

  Check if that helps.

• Try to uninstall build Munki 3.1, does not work and leaves several entries in the registry

  When I try to remove build Munki 3.1 a few days ago. However, direct the directory uninstallation fails generally as the Build Munki 3.1 leaves several entries in the registry of the computer. How should I do?

  * original title - how should I do? *

  Hi jacob,

  If the standard uninstall process is not working (as seems to be the case), then try to use the free Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html that often works when the usual process does a complete job.  I know for a fact that in advanced mode, there's a special process which deals expressly with clean up the leftovers of the program register.  Personally, I use Revo to uninstall everything that I want to uninstall (more with AV products special removal tools) because almost all normal uninstall process leaves something behind (I had to remove the remains on almost each uninstall I made using Revo) and this will keep my own system.

  If you have already uninstalled to the point that it does not appear as an option in Revo, then reinstall again and then uninstall with Revo in advanced mode and this time and that should do the trick.

  I hope this helps.

  Good luck!