Shuffle off

Similar Questions

• iTunes 12.5 randomly adding to the next place; Shuffle off

  First of all, I want to mention that I am a developer of software (specifically for the iOS and OS X platforms), so I'm no stranger to the resolution of the problems. However, I've looked everywhere on the internet for people with a similar problem and found nothing!

  The question

  To play any song, whether it's straight out of an album in my recently added or one through research, my iTunes automatically adds songs randomly my library to the next place. So even if I decide to play the 4th song in an album, instead of playing the song 5 after that, he'll play another song randomly my library. Before ask you, shuffle is and has always been, disabled. I do not use the shuffle. It's one of the reasons as to why this is becoming quite annoying.

  Steps to reproduce

  Something to note that this happens only occasionally. Sometimes my library will play things very well, and then randomly, the bug will be add to my next place and ruin everything. The bug happens usually when I play on a new album. I use AirPlay occasionally as well, but I do not have all memory of if everything changes when enabled / disable. Curiously, he can't always launch. It be peut, but not always.

  As an estimate of the frequency approximate, if I'm playing music off my library for 5 hours of the day, it will happen 3 - 4 times.

  1. Open iTunes (make sure shuffle is off)
  2. Start playing a song from anywhere, be it of an album or single
  3. iTunes will eventually add songs to my next place at random

  Temporary workaround

  Even once to the top following was deleted, and I try to play a new song, iTunes will be once more, to add to the next place. It's that when I clear the next room, turn shuffle on and then turn off shuffle again, it stops. Sometimes the out-turned on will not work, and I have to repeat 2 or 3 times until it finally stopped.

  This question and discovered the following:

  It depends on where you click to start the track. If you click directly with simple click the small arrow that appears when moving the mouse on the title you want to play first, he will play songs randomly thereafter.

  If you double-click the title itself (not the small arrow), then it will play not random.

  It's not intuitive user experience.

• How can I turn off shuffle on the latest ios 9. I don't care

  It was a maddening, any quest in the morning and I'm hoping someone can answer how to disable the option shuffle for IPAD. the reason for the caps is because I've been Googling all morning and every single response shows just iPHONE, screenshots, and they are clearly different interfaces because the options they show simply do not appear.

  I keep seeing again and again to choose a song from an album so the album art and song info are full screen and then tap the icon shuffle inside, although simply is not working because the selection of a new album in ipad brings to the top of the entire track on the album cover on the right and the left and simply select the cheek pieces. There is a big 'Shuffle' just above the track list, but by selecting only mix, changing and mixing the new order. The instructions for the iphone obviously do not correspond to the ipad so can someone who did an ipad tell me how to shuffle off please?

  I hate how Apple has now the need to keep changing the user interface more. I would rather have stuck with the ios interface 6 or ios 5 if it meant that they stopped to bury the functions in the most complicated way, non-obvious possible. Simple functions like this are supposed to be intuitive, not getting people to need to google all morning and then ask a question on a forum to find out. Thanks for the help!

  I have an iPad. The ways to the Shuffle is on the two screenshots below... The first one mixes everything. Another mix album only. If this does not work for your I would like to reset your music application or restore the iPad than something is wrong with the system.

  Reset music approx. close music completely from the window of the selector app by double clicking the Home button and slide up the preview pane of music until it disappears from the display. Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

  

  

• Playlists and albums only shuffle?

  I am in the first week of my trial period of Apple's music, and I love it.  The only problem I had so far, is that when I try to play one of the playlists - or an album not in my library - she only mix the songs.   I'm not able to play the songs in the order.  Not a huge deal, but it looks like there should be a setting to fix it that I am not finding.

  iPhone iOS version 9.2, 6.

  Thank you.

  On the view is on the air, there should be a couple of icons at the bottom for the random reading and re-reading or whatever his name. Looks like the shuffle button has been activated so try to press a second time to shuffle off. You can certainly play albums and playlists in order to track if you wish.

• Shuffle does not work

  I'm having a problem with the shuffle feature. What I want to do is to play all the songs in my music library in random order, so I went into settings > music Options and turned ON Shuffle. Then I click on music > Shuffle and a song randomly starts to play. But after that, he plays just songs in alphabetical order.

  When a song is played, I can press the Menu button, which shows me that the Shuffle is ON. If I shuffle off and back on, then the Shuffle icon appears at the top of the screen. When I press Next, a song randomly starts to play, which is exactly what I want. After that? Back to alphabetical, and the Shuffle icon disappeared. Check the settings, and Yes, the Shuffle is still on. Except that this isn't the case.

  I spend a lot of time driving to my work and I love the changing and unpredictable music. The ability to shuffle 4 GB of songs is the main reason why I bought a MP3 player that is dedicated in the first place. Can anyone offer some suggestions as to why the Shuffle does not work?

  It seems that your drive has firmware 1.25 (do you have updated recently?), which has now been cancelled due shuffle does not.

  Downgrade firmware 1.22 , the problem will be solved.

• How can I listen to an album in order?

  I can't find a way to turn off shuffle when you listen to an album.  I feel pretty stupid... I must be missing something * really * obvious.

  in OS X

  Shuffle on

  

  Shuffle off

  in OS 9.3.5 is this

  

• Listen to concerto sequentially

  Problem: I want to listen to the Beethoven Concerto in 3 movements.    The program plays the first movement, but then moves to the 3rd movement or randomly selects another piece of music that I didn't.  I want to listen to the first movement, then the second movement, then the third movement.   This is impossible.   Any solution?

  Hey t5dashc,

  Thank you for being a part of the communities of Apple Support.

  I see your message you are trying to play your music in a sequential order, but it is up to chance.  This behavior is indicative of the shuffle option is enabled.  We will shuffle off in the music app and try to play the music again:
  

  

  When you play a song, you see a player at the bottom of the screen. You can continue to browse other titles to find the next perfect song.

  

  Press or drag upward on the drive down to see the current reading and controls screen.

  

  Then stir and repeat

  Also on the playing screen, you can go back, put in pause or fast forward a song, control volume, playback of the song, lyricsand more.

  Swipe up on reading to display your queue up next, that lists all the songs that you have selected for the current playback.

  Drag the songs with to rearrange the order, or swipe to the left to remove a song you want to ignore.

  Press on to the right of the next place to mix the songs in a playlist or album.

  Type once to play entire playlist or album looped or twice to repeat a song. Type a third time to remove the repetition.

  Use of music music Apple in the app

  Take care.

• iPod not syncing

  my ipod shuffle not sync to itunes. same computer, ipod, even... .no error messages. just a voice on the iPod saying I need to sync to itunes? on itunes it shows that it is synchronization and full sync.

  Hi oceanct,

  If iPod shuffle is not synchronized to iTunes, you may need to reset.  Here's how:

  Learn how to reset your iPod

  iPod shuffle

  To reset your iPod shuffle, follow these steps:

  1. If your iPod is connected to your computer, unplug it.
  2. Move the switch on iPod shuffle OFF. When set to Off, you will not be able to see the Green Strip.
  3. Wait ten seconds.
  4. Put it on one of the game. You will be able to see the Green Strip.
     

  If the problem persists, please respond back with more information:

  IPod shuffle you have?  You are using a Mac or a PC?  What version of iTunes?

  We will do our best to solve the problems more far.

  Have a great day!

• Playing albums in-App music with voice commands

  When I try to play music an album by voice command using the app on iOS, it does not play in the order of the pieces and mixture is automatically regardless of whether or not the shuffle off. Is it possible to play an album by voice command (or Siri) while using the order of the pieces?

  Issue seems to have been fixed - it may have been something to do with the songs "side" have to complete to reset the app - deleted manually while songs were still did not work.

• iTunes for PC 12: order of the song in the Album?

  I find a problem with recently installed iTunes 12 for PC.

  I have a lot of albums containing several symphonies or concertos. I would like to (movements) songs in each album to play in order. If an album contains 23 Concerto of Mozart followed by Haydn Concerto for 5, I just want to play Mozart Concerto 23 movements 1,2,3, then Haydn Concerto 5 movements 1,2,3, etc..

  Instead of this, recently installed iTunes 12.3.2.35 mix songs: movement 1 Mozart, Haydn 3 movement, movement Mozart 2. I have found no way to disable this option regardless of documentation; in principle, I have shuffle off.

  This problem started with iTunes 12. So, how I can be:

  -Configure iTunes 12 to play songs in the albums in order?

  - or return to iTunes 11 without destroying my my library organization?

  (I have no intention of creating hundreds of playlists to work around this problem, instead, I happen to non-Apple products).

  Activate the menu with Ctrl + B if hidden bar.

  Use the option menu control > Shuffle > Off.

  Use a view of your library which is friendly album, for example the view of songs sorted as Album of the artist, growing.

  If the problem persists, please post a screenshot of an album of problem and the reading order.

  TT2

• Jam clip will not play my aac/m4a files.

  Hello
  I bought a Jam of SansaDisk Clip.
  It is a pure piece of kit, but it does not play aac/m4a files.
  Sansa will be able to fix this with a firmware update?

  These files play OK on my iPod Shuffle before he shuffled off the coast of this death spiral.
  It could be that the Jam Clip is simply too fussy about the types of aac/m4a files it can and can not play.
  I'll give an example of unread aac/m4a file if you need it.

  Hello
  There is a problem with the video Jam and m4a files created by FFmpeg (/ converter programs that use FFmpeg).

  FFmpeg people work on a patch (for the FFmpeg program, not for the Jam Clip).

  If people have m4a files that will play on their Jam Clip (because they might have been converted using FFmpeg) they can probably be fixed without convert them again.

  The process is known as "Re-multiplexing.
  It is a process without loss, the sound quality of the fixed files is just as good as the originals.

  I used this method here---> https://www.hydrogenaud.io/forums/index.php?showtopic=109931
  (#6 Post and Post #7)

  There are other ways to do the job.
  Google search for terms such as "mp4 muxer.

  

• How do you sort order in the playlist

  I downloaded mp3tag and a bunch of other things.  Is not intuitive.  Finally, I just renamed all my songs using the 01-01, etc.  It sorts correctly on the drive, but when I go in my video, it's no longer sort by number.  And I shuffle off.  I worked on it for 5 hours last night and it worked, but this morning, I added 1 piece (replaced 01-01) and now it won't sort by number.  I changed nothing else.  And now it is sort alphabetically by title rather than by name.   I even deleted the column title to view the disk, but the clip still sorts like that.

  It's driving me crazy.  How can I get 38 songs to play in the order that I choose for my training?

  I found it!  Music, records, external SDCard, music, play at all

• Music by selecting the files/folders

  I just bought a sansa clip and I'm having a problem when playing music. I have my music in the music folder and who plays without problem. I want to have a record of Christmas music and tried to put this folder in the music folder. He went to the fine, the record is there, but it is now hanging out with General music I have here. I have the player on shuffle. I have XP SP3 and the latest version of windows media player which I have not used to load the drive, I did slip it drop from the Explorer. If I turn the shuffle off I will (I really want to listen to the songs in the order), but I still cannot see the file on Christmas on players display for select this option? It escapes me?

  One more question if I can. I downloaded the latest firmware and I went to play music, and he says that he has no songs. I put all the songs back in the drive and it's fine now, but this will happen whenever I update the firmware?

  I appreciate any help I can get.

  OK, thanks for the help, I think I'll try the playlist. I'm not a computer genius and I wish they would make this easier.

• Option of sections and numbers beginning with 0 for example, 1.0, 2.0, 3.0, etc.

  Hello world

  I can't find a way to number sections of a document with a prefixe.0 (InDesign says that the value must be between 1 and 9999). For example:

  1.0

  1.1

  1.2

  1.3

  2.0

  2.1

  2.2 etc.

  I have currently replaced the page master and typed manually section but on the pdf, the numbering is incorrect (as it is controlled by the option of numbering and sections).

  Is there a solution to this?

  Yes, ID does not understand this numbering system.

  What you can do is to use SEVERAL sections, one for the page.0 and one for the pages .x. use a Section marker for the pages.0 with the whole number, i.e. 1.0 (NOT a section prefix), and instead of a page marker number insert the special character of marker section on the page (you will have always to do these one at a time ", I think). Use a prefix of x. for the other section pages (x number of section) and check the box to include prefix when numbering. All MultiPage sections will now start at 1 and all the sections.0 can be 1 or 2 according to whether they are left or right side of the pages.

  A word of warning, however, if the pages.0 are on the right, you shuffle off to force ID to pass the other pages then 1.1 is on the left and 1.2 is on the right, and your readers will find annoying numbering.

• How can I place image everywhere outside the brochure?

  I am currently engaged in my annual task of designing a booklet from A5 24 pages using folded A4 paper. All internal portrait mode A5 pages (pages 2-23) are monochromatic and have been created in InDesign CS6, while the outer skin of color (pp. 1-24) was designed as a single page A4 landscape in Adobe Illustrator CS6. This allows graphic images to flow seamlessly between the cover and the back cover.

  My normal practice has been to print this book myself, using a for the contents of the color inkjet printer and a printer monochrome laser for all the rest. I print directly starting from Illustrator for the outer double staggered and use InDesign "print booklet" for all internal pages.

  This year, I seriously think the brochure produced by a printer, who would use a printer laser color for the entire booklet. So, I want to merge the Illustrator illustration in my Indesign file so that I can generate a single PDF file for sending to the printer.

  I guess there is a simple way to import the artwork into InDesign, but so far I could not find a way to put a file on several pages 1 and 24. Any help would be appreciated.

  David

  Place and position as you want on page 1 (leaving the full frame), and then copy and paste in place on page 24. Harvest to the spine on both pages.

  OR

  Shuffle off page 1 spread, then do slide page 24 up next in the Pages panel and place the art at once. If you do this, I would move the last page back in the PDF file after export.